watchdog: keembay: Typo corrections and other blank operations

Corrected typos, aligned the tabs and added new lines
wherever required for better readability

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Kris Pan <kris.pan@intel.com>
Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com>
Link: https://lore.kernel.org/r/20210517174953.19404-10-shruthi.sanil@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This commit is contained in:
Shruthi Sanil 2021-05-17 23:19:53 +05:30 committed by Wim Van Sebroeck
parent 613c4db220
commit d1fb8bbd76

View File

@ -26,11 +26,14 @@
#define WDT_TH_INT_MASK BIT(8)
#define WDT_TO_INT_MASK BIT(9)
#define WDT_INT_CLEAR_SMC 0x8200ff18
#define WDT_UNLOCK 0xf1d0dead
#define WDT_DISABLE 0x0
#define WDT_ENABLE 0x1
#define WDT_LOAD_MAX U32_MAX
#define WDT_LOAD_MIN 1
#define WDT_TIMEOUT 5
#define WDT_PRETIMEOUT 4
@ -144,7 +147,7 @@ static irqreturn_t keembay_wdt_to_isr(int irq, void *dev_id)
struct arm_smccc_res res;
arm_smccc_smc(WDT_INT_CLEAR_SMC, WDT_TO_INT_MASK, 0, 0, 0, 0, 0, 0, &res);
dev_crit(wdt->wdd.parent, "Intel Keem Bay non-sec wdt timeout.\n");
dev_crit(wdt->wdd.parent, "Intel Keem Bay non-secure wdt timeout.\n");
emergency_restart();
return IRQ_HANDLED;
@ -158,7 +161,7 @@ static irqreturn_t keembay_wdt_th_isr(int irq, void *dev_id)
keembay_wdt_set_pretimeout(&wdt->wdd, 0x0);
arm_smccc_smc(WDT_INT_CLEAR_SMC, WDT_TH_INT_MASK, 0, 0, 0, 0, 0, 0, &res);
dev_crit(wdt->wdd.parent, "Intel Keem Bay non-sec wdt pre-timeout.\n");
dev_crit(wdt->wdd.parent, "Intel Keem Bay non-secure wdt pre-timeout.\n");
watchdog_notify_pretimeout(&wdt->wdd);
return IRQ_HANDLED;
@ -278,8 +281,8 @@ static const struct of_device_id keembay_wdt_match[] = {
MODULE_DEVICE_TABLE(of, keembay_wdt_match);
static struct platform_driver keembay_wdt_driver = {
.probe = keembay_wdt_probe,
.driver = {
.probe = keembay_wdt_probe,
.driver = {
.name = "keembay_wdt",
.of_match_table = keembay_wdt_match,
.pm = &keembay_wdt_pm_ops,