diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 27641bc83962..fb624469d0ee 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -4483,6 +4483,57 @@ static DEFINE_HANDLER(5);
 static DEFINE_HANDLER(6);
 static DEFINE_HANDLER(7);
 
+static void mtip_disable_link_opts(struct driver_data *dd, struct pci_dev *pdev)
+{
+	int pos;
+	unsigned short pcie_dev_ctrl;
+
+	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+	if (pos) {
+		pci_read_config_word(pdev,
+			pos + PCI_EXP_DEVCTL,
+			&pcie_dev_ctrl);
+		if (pcie_dev_ctrl & (1 << 11) ||
+		    pcie_dev_ctrl & (1 << 4)) {
+			dev_info(&dd->pdev->dev,
+				"Disabling ERO/No-Snoop on bridge device %04x:%04x\n",
+					pdev->vendor, pdev->device);
+			pcie_dev_ctrl &= ~(PCI_EXP_DEVCTL_NOSNOOP_EN |
+						PCI_EXP_DEVCTL_RELAX_EN);
+			pci_write_config_word(pdev,
+				pos + PCI_EXP_DEVCTL,
+				pcie_dev_ctrl);
+		}
+	}
+}
+
+static void mtip_fix_ero_nosnoop(struct driver_data *dd, struct pci_dev *pdev)
+{
+	/*
+	 * This workaround is specific to AMD/ATI chipset with a PCI upstream
+	 * device with device id 0x5aXX
+	 */
+	if (pdev->bus && pdev->bus->self) {
+		if (pdev->bus->self->vendor == PCI_VENDOR_ID_ATI &&
+		    ((pdev->bus->self->device & 0xff00) == 0x5a00)) {
+			mtip_disable_link_opts(dd, pdev->bus->self);
+		} else {
+			/* Check further up the topology */
+			struct pci_dev *parent_dev = pdev->bus->self;
+			if (parent_dev->bus &&
+				parent_dev->bus->parent &&
+				parent_dev->bus->parent->self &&
+				parent_dev->bus->parent->self->vendor ==
+					 PCI_VENDOR_ID_ATI &&
+				(parent_dev->bus->parent->self->device &
+					0xff00) == 0x5a00) {
+				mtip_disable_link_opts(dd,
+					parent_dev->bus->parent->self);
+			}
+		}
+	}
+}
+
 /*
  * Called for each supported PCI device detected.
  *
@@ -4634,6 +4685,8 @@ static int mtip_pci_probe(struct pci_dev *pdev,
 		goto msi_initialize_err;
 	}
 
+	mtip_fix_ero_nosnoop(dd, pdev);
+
 	/* Initialize the block layer. */
 	rv = mtip_block_initialize(dd);
 	if (rv < 0) {