USB/Thunderbolt fixes for 5.9-rc6

Here are some small USB and one Thunderbolt driver fixes for 5.9-rc6.
 
 Nothing major at all, just some fixes for reported issues, and a quirk
 addition:
 	- typec fixes
 	- UAS disconnect fix
 	- usblp race fix
 	- ehci-hcd modversions build fix
 	- ignore wakeup quirk table addition
 	- thunderbolt DROM read fix
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX2dYBQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynDcwCaAnv7/ntiSeWCAKo5cJr6XKy6DxoAoI3kqe6h
 N4a7uHFiAVtNvtvqNr6Q
 =iwyf
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt fixes from Greg KH:
 "Here are some small USB and one Thunderbolt driver fixes.

  Nothing major at all, just some fixes for reported issues, and a quirk
  addition:

   - typec fixes

   - UAS disconnect fix

   - usblp race fix

   - ehci-hcd modversions build fix

   - ignore wakeup quirk table addition

   - thunderbolt DROM read fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usblp: fix race between disconnect() and read()
  ehci-hcd: Move include to keep CRC stable
  usb: typec: intel_pmc_mux: Handle SCU IPC error conditions
  USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook
  USB: UAS: fix disconnect by unplugging a hub
  usb: typec: ucsi: Prevent mode overrun
  usb: typec: ucsi: acpi: Increase command completion timeout value
  thunderbolt: Retry DROM read once if parsing fails

drivers/thunderbolt/eeprom.c

@@ -7,6 +7,7 @@
  */
 
 #include <linux/crc32.h>
+#include <linux/delay.h>
 #include <linux/property.h>
 #include <linux/slab.h>
 #include "tb.h"
@@ -389,8 +390,8 @@ static int tb_drom_parse_entries(struct tb_switch *sw)
 		struct tb_drom_entry_header *entry = (void *) (sw->drom + pos);
 		if (pos + 1 == drom_size || pos + entry->len > drom_size
 				|| !entry->len) {
-			tb_sw_warn(sw, "drom buffer overrun, aborting\n");
-			return -EIO;
+			tb_sw_warn(sw, "DROM buffer overrun\n");
+			return -EILSEQ;
 		}
 
 		switch (entry->type) {
@@ -526,7 +527,8 @@ int tb_drom_read(struct tb_switch *sw)
 	u16 size;
 	u32 crc;
 	struct tb_drom_header *header;
-	int res;
+	int res, retries = 1;
+
 	if (sw->drom)
 		return 0;
 
@@ -612,7 +614,17 @@ parse:
 		tb_sw_warn(sw, "drom device_rom_revision %#x unknown\n",
 			header->device_rom_revision);
 
-	return tb_drom_parse_entries(sw);
+	res = tb_drom_parse_entries(sw);
+	/* If the DROM parsing fails, wait a moment and retry once */
+	if (res == -EILSEQ && retries--) {
+		tb_sw_warn(sw, "parsing DROM failed, retrying\n");
+		msleep(100);
+		res = tb_drom_read_n(sw, 0, sw->drom, size);
+		if (!res)
+			goto parse;
+	}
+
+	return res;
 err:
 	kfree(sw->drom);
 	sw->drom = NULL;

drivers/usb/class/usblp.c

@@ -827,6 +827,11 @@ static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, lo
 	if (rv < 0)
 		return rv;
 
+	if (!usblp->present) {
+		count = -ENODEV;
+		goto done;
+	}
+
 	if ((avail = usblp->rstatus) < 0) {
 		printk(KERN_ERR "usblp%d: error %d reading from printer\n",
 		    usblp->minor, (int)avail);

drivers/usb/core/quirks.c

@@ -397,6 +397,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Generic RTL8153 based ethernet adapters */
 	{ USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* SONiX USB DEVICE Touchpad */
+	{ USB_DEVICE(0x0c45, 0x7056), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
 	/* Action Semiconductor flash disk */
 	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },

drivers/usb/host/ehci-hcd.c

@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/debugfs.h>

drivers/usb/host/ehci-hub.c

@@ -14,7 +14,6 @@
  */
 
 /*-------------------------------------------------------------------------*/
-#include <linux/usb/otg.h>
 
 #define	PORT_WAKE_BITS	(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
 

drivers/usb/storage/uas.c

@@ -662,8 +662,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 	if (devinfo->resetting) {
 		cmnd->result = DID_ERROR << 16;
 		cmnd->scsi_done(cmnd);
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		return 0;
+		goto zombie;
 	}
 
 	/* Find a free uas-tag */
@@ -699,6 +698,16 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
 
 	err = uas_submit_urbs(cmnd, devinfo);
+	/*
+	 * in case of fatal errors the SCSI layer is peculiar
+	 * a command that has finished is a success for the purpose
+	 * of queueing, no matter how fatal the error
+	 */
+	if (err == -ENODEV) {
+		cmnd->result = DID_ERROR << 16;
+		cmnd->scsi_done(cmnd);
+		goto zombie;
+	}
 	if (err) {
 		/* If we did nothing, give up now */
 		if (cmdinfo->state & SUBMIT_STATUS_URB) {
@@ -709,6 +718,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 	}
 
 	devinfo->cmnd[idx] = cmnd;
+zombie:
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 	return 0;
 }

drivers/usb/typec/mux/intel_pmc_mux.c

@@ -125,13 +125,19 @@ static int hsl_orientation(struct pmc_usb_port *port)
 static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
 {
 	u8 response[4];
+	int ret;
 
 	/*
 	 * Error bit will always be 0 with the USBC command.
-	 * Status can be checked from the response message.
+	 * Status can be checked from the response message if the
+	 * function intel_scu_ipc_dev_command succeeds.
 	 */
-	intel_scu_ipc_dev_command(port->pmc->ipc, PMC_USBC_CMD, 0, msg, len,
-				  response, sizeof(response));
+	ret = intel_scu_ipc_dev_command(port->pmc->ipc, PMC_USBC_CMD, 0, msg,
+					len, response, sizeof(response));
+
+	if (ret)
+		return ret;
+
 	if (response[2] & PMC_USB_RESP_STATUS_FAILURE) {
 		if (response[2] & PMC_USB_RESP_STATUS_FATAL)
 			return -EIO;

drivers/usb/typec/ucsi/ucsi.c

@@ -216,14 +216,18 @@ void ucsi_altmode_update_active(struct ucsi_connector *con)
 					    con->partner_altmode[i] == altmode);
 }
 
-static u8 ucsi_altmode_next_mode(struct typec_altmode **alt, u16 svid)
+static int ucsi_altmode_next_mode(struct typec_altmode **alt, u16 svid)
 {
 	u8 mode = 1;
 	int i;
 
-	for (i = 0; alt[i]; i++)
+	for (i = 0; alt[i]; i++) {
+		if (i > MODE_DISCOVERY_MAX)
+			return -ERANGE;
+
 		if (alt[i]->svid == svid)
 			mode++;
+	}
 
 	return mode;
 }
@@ -258,8 +262,11 @@ static int ucsi_register_altmode(struct ucsi_connector *con,
 			goto err;
 		}
 
-		desc->mode = ucsi_altmode_next_mode(con->port_altmode,
-						    desc->svid);
+		ret = ucsi_altmode_next_mode(con->port_altmode, desc->svid);
+		if (ret < 0)
+			return ret;
+
+		desc->mode = ret;
 
 		switch (desc->svid) {
 		case USB_TYPEC_DP_SID:
@@ -292,8 +299,11 @@ static int ucsi_register_altmode(struct ucsi_connector *con,
 			goto err;
 		}
 
-		desc->mode = ucsi_altmode_next_mode(con->partner_altmode,
-						    desc->svid);
+		ret = ucsi_altmode_next_mode(con->partner_altmode, desc->svid);
+		if (ret < 0)
+			return ret;
+
+		desc->mode = ret;
 
 		alt = typec_partner_register_altmode(con->partner, desc);
 		if (IS_ERR(alt)) {

drivers/usb/typec/ucsi/ucsi_acpi.c

@@ -78,7 +78,7 @@ static int ucsi_acpi_sync_write(struct ucsi *ucsi, unsigned int offset,
 	if (ret)
 		goto out_clear_bit;
 
-	if (!wait_for_completion_timeout(&ua->complete, msecs_to_jiffies(5000)))
+	if (!wait_for_completion_timeout(&ua->complete, 60 * HZ))
 		ret = -ETIMEDOUT;
 
 out_clear_bit: