korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-11 04:18:39 +08:00
Code Issues Packages Projects Releases Wiki Activity

scsi: Documentation: Correct spelling

Browse Source 
Correct spelling problems for Documentation/scsi/ as reported by codespell.

Link: https://lore.kernel.org/r/20230129231053.20863-8-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
Randy Dunlap 2023-01-29 15:10:51 -08:00 committed by Martin K. Petersen
parent 685d5ef436
commit cf065a7da5
4 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/scsi/ncr53c8xx.rst
View File

@ -906,7 +906,7 @@ burst:#x burst enabled (1<<#x burst transfers max)
led:0 disable LED support
===== ===================
Donnot enable LED support if your scsi board does not use SDMS BIOS.
Do not enable LED support if your scsi board does not use SDMS BIOS.
(See 'Configuration parameters')
10.2.13 Max wide
@ -1222,7 +1222,7 @@ Unfortunately, the following common SCSI BUS problems are not detected:
- Bad quality terminators.
On the other hand, either bad cabling, broken devices, not conformant
devices, ... may cause a SCSI signal to be wrong when te driver reads it.
devices, ... may cause a SCSI signal to be wrong when the driver reads it.
10.7 IMMEDIATE ARBITRATION boot option
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

2
Documentation/scsi/sym53c8xx_2.rst
View File

@ -703,7 +703,7 @@ Unfortunately, the following common SCSI BUS problems are not detected:
- Bad quality terminators.
On the other hand, either bad cabling, broken devices, not conformant
devices, ... may cause a SCSI signal to be wrong when te driver reads it.
devices, ... may cause a SCSI signal to be wrong when the driver reads it.
15. SCSI problem troubleshooting
================================

2
Documentation/scsi/tcm_qla2xxx.rst
View File

@ -6,7 +6,7 @@ tcm_qla2xxx Driver Notes
tcm_qla2xxx jam_host attribute
------------------------------
There is now a new module endpoint atribute called jam_host
There is now a new module endpoint attribute called jam_host
attribute::
jam_host: boolean=0/1

2
Documentation/scsi/ufs.rst
View File

@ -206,5 +206,5 @@ Device-Specific Data property named "ref-clk-freq". In both ways the value
is interpreted as frequency in Hz and must match one of the values given in
the UFS specification. UFS subsystem will attempt to read the value when
executing common controller initialization. If the value is available, UFS
subsytem will ensure the bRefClkFreq attribute of the UFS storage device is
subsystem will ensure the bRefClkFreq attribute of the UFS storage device is
set accordingly and will modify it if there is a mismatch.