PCI/DOE: Relax restrictions on request and response size

An upcoming user of DOE is CMA (Component Measurement and Authentication,
PCIe r6.0 sec 6.31).

It builds on SPDM (Security Protocol and Data Model):
https://www.dmtf.org/dsp/DSP0274

SPDM message sizes are not always a multiple of dwords.  To transport
them over DOE without using bounce buffers, allow sending requests and
receiving responses whose final dword is only partially populated.

To be clear, PCIe r6.0 sec 6.30.1 specifies the Data Object Header 2
"Length" in dwords and pci_doe_send_req() and pci_doe_recv_resp()
read/write dwords.  So from a spec point of view, DOE is still specified
in dwords and allowing non-dword request/response buffers is merely for
the convenience of callers.

Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Ming Li <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/151b1a6a1794afb65d941287ecbc032c5b8004b9.1678543498.git.lukas@wunner.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This commit is contained in:
Lukas Wunner 2023-03-11 15:40:15 +01:00 committed by Dan Williams
parent 74e491e5d1
commit cedf8d8a50

View File

@ -76,13 +76,6 @@ struct pci_doe_protocol {
* @private: Private data for the consumer
* @work: Used internally by the mailbox
* @doe_mb: Used internally by the mailbox
*
* The payload sizes and rv are specified in bytes with the following
* restrictions concerning the protocol.
*
* 1) The request_pl_sz must be a multiple of double words (4 bytes)
* 2) The response_pl_sz must be >= a single double word (4 bytes)
* 3) rv is returned as bytes but it will be a multiple of double words
*/
struct pci_doe_task {
struct pci_doe_protocol prot;
@ -153,7 +146,7 @@ static int pci_doe_send_req(struct pci_doe_mb *doe_mb,
{
struct pci_dev *pdev = doe_mb->pdev;
int offset = doe_mb->cap_offset;
size_t length;
size_t length, remainder;
u32 val;
int i;
@ -171,7 +164,7 @@ static int pci_doe_send_req(struct pci_doe_mb *doe_mb,
return -EIO;
/* Length is 2 DW of header + length of payload in DW */
length = 2 + task->request_pl_sz / sizeof(__le32);
length = 2 + DIV_ROUND_UP(task->request_pl_sz, sizeof(__le32));
if (length > PCI_DOE_MAX_LENGTH)
return -EIO;
if (length == PCI_DOE_MAX_LENGTH)
@ -184,10 +177,21 @@ static int pci_doe_send_req(struct pci_doe_mb *doe_mb,
pci_write_config_dword(pdev, offset + PCI_DOE_WRITE,
FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH,
length));
/* Write payload */
for (i = 0; i < task->request_pl_sz / sizeof(__le32); i++)
pci_write_config_dword(pdev, offset + PCI_DOE_WRITE,
le32_to_cpu(task->request_pl[i]));
/* Write last payload dword */
remainder = task->request_pl_sz % sizeof(__le32);
if (remainder) {
val = 0;
memcpy(&val, &task->request_pl[i], remainder);
le32_to_cpus(&val);
pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val);
}
pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_GO);
return 0;
@ -207,11 +211,11 @@ static bool pci_doe_data_obj_ready(struct pci_doe_mb *doe_mb)
static int pci_doe_recv_resp(struct pci_doe_mb *doe_mb, struct pci_doe_task *task)
{
size_t length, payload_length, remainder, received;
struct pci_dev *pdev = doe_mb->pdev;
int offset = doe_mb->cap_offset;
size_t length, payload_length;
int i = 0;
u32 val;
int i;
/* Read the first dword to get the protocol */
pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
@ -238,15 +242,38 @@ static int pci_doe_recv_resp(struct pci_doe_mb *doe_mb, struct pci_doe_task *tas
/* First 2 dwords have already been read */
length -= 2;
payload_length = min(length, task->response_pl_sz / sizeof(__le32));
/* Read the rest of the response payload */
for (i = 0; i < payload_length; i++) {
received = task->response_pl_sz;
payload_length = DIV_ROUND_UP(task->response_pl_sz, sizeof(__le32));
remainder = task->response_pl_sz % sizeof(__le32);
/* remainder signifies number of data bytes in last payload dword */
if (!remainder)
remainder = sizeof(__le32);
if (length < payload_length) {
received = length * sizeof(__le32);
payload_length = length;
remainder = sizeof(__le32);
}
if (payload_length) {
/* Read all payload dwords except the last */
for (; i < payload_length - 1; i++) {
pci_read_config_dword(pdev, offset + PCI_DOE_READ,
&val);
task->response_pl[i] = cpu_to_le32(val);
pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
}
/* Read last payload dword */
pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
task->response_pl[i] = cpu_to_le32(val);
cpu_to_le32s(&val);
memcpy(&task->response_pl[i], &val, remainder);
/* Prior to the last ack, ensure Data Object Ready */
if (i == (payload_length - 1) && !pci_doe_data_obj_ready(doe_mb))
if (!pci_doe_data_obj_ready(doe_mb))
return -EIO;
pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
i++;
}
/* Flush excess length */
@ -260,7 +287,7 @@ static int pci_doe_recv_resp(struct pci_doe_mb *doe_mb, struct pci_doe_task *tas
if (FIELD_GET(PCI_DOE_STATUS_ERROR, val))
return -EIO;
return min(length, task->response_pl_sz / sizeof(__le32)) * sizeof(__le32);
return received;
}
static void signal_task_complete(struct pci_doe_task *task, int rv)
@ -561,14 +588,6 @@ static int pci_doe_submit_task(struct pci_doe_mb *doe_mb,
if (!pci_doe_supports_prot(doe_mb, task->prot.vid, task->prot.type))
return -EINVAL;
/*
* DOE requests must be a whole number of DW and the response needs to
* be big enough for at least 1 DW
*/
if (task->request_pl_sz % sizeof(__le32) ||
task->response_pl_sz < sizeof(__le32))
return -EINVAL;
if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags))
return -EIO;
@ -596,6 +615,11 @@ static int pci_doe_submit_task(struct pci_doe_mb *doe_mb,
* without byte-swapping. If payloads contain little-endian register values,
* the caller is responsible for conversion with cpu_to_le32() / le32_to_cpu().
*
* For convenience, arbitrary payload sizes are allowed even though PCIe r6.0
* sec 6.30.1 specifies the Data Object Header 2 "Length" in dwords. The last
* (partial) dword is copied with byte granularity and padded with zeroes if
* necessary. Callers are thus relieved of using dword-sized bounce buffers.
*
* RETURNS: Length of received response or negative errno.
* Received data in excess of @response_sz is discarded.
* The length may be smaller than @response_sz and the caller