mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 21:38:32 +08:00
Input: add joystick driver for Walkera WK-0701 RC transmitter
Signed-off-by: Peter Popovec <popovec@fei.tuke.sk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This commit is contained in:
Peter Popovec
Dmitry Torokhov
parent
59bdb43769
commit
cec87e38e9
109
Documentation/input/walkera0701.txt
Normal file
109
Documentation/input/walkera0701.txt
Normal file
@ -0,0 +1,109 @@
|
||||
|
||||
Walkera WK-0701 transmitter is supplied with a ready to fly Walkera
|
||||
helicopters such as HM36, HM37, HM60. The walkera0701 module enables to use
|
||||
this transmitter as joystick
|
||||
|
||||
Devel homepage and download:
|
||||
http://zub.fei.tuke.sk/walkera-wk0701/
|
||||
|
||||
or use cogito:
|
||||
cg-clone http://zub.fei.tuke.sk/GIT/walkera0701-joystick
|
||||
|
||||
|
||||
Connecting to PC:
|
||||
|
||||
At back side of transmitter S-video connector can be found. Modulation
|
||||
pulses from processor to HF part can be found at pin 2 of this connector,
|
||||
pin 3 is GND. Between pin 3 and CPU 5k6 resistor can be found. To get
|
||||
modulation pulses to PC, signal pulses must be amplified.
|
||||
|
||||
Cable: (walkera TX to parport)
|
||||
|
||||
Walkera WK-0701 TX S-VIDEO connector:
|
||||
(back side of TX)
|
||||
__ __ S-video: canon25
|
||||
/ |_| \ pin 2 (signal) NPN parport
|
||||
/ O 4 3 O \ pin 3 (GND) LED ________________ 10 ACK
|
||||
( O 2 1 O ) | C
|
||||
\ ___ / 2 ________________________|\|_____|/
|
||||
| [___] | |/| B |\
|
||||
------- 3 __________________________________|________________ 25 GND
|
||||
E
|
||||
|
||||
|
||||
I use green LED and BC109 NPN transistor.
|
||||
|
||||
Software:
|
||||
|
||||
Build kernel with walkera0701 module. Module walkera0701 need exclusive
|
||||
access to parport, modules like lp must be unloaded before loading
|
||||
walkera0701 module, check dmesg for error messages. Connect TX to PC by
|
||||
cable and run jstest /dev/input/js0 to see values from TX. If no value can
|
||||
be changed by TX "joystick", check output from /proc/interrupts. Value for
|
||||
(usually irq7) parport must increase if TX is on.
|
||||
|
||||
|
||||
|
||||
Technical details:
|
||||
|
||||
Driver use interrupt from parport ACK input bit to measure pulse length
|
||||
using hrtimers.
|
||||
|
||||
Frame format:
|
||||
Based on walkera WK-0701 PCM Format description by Shaul Eizikovich.
|
||||
(downloaded from http://www.smartpropoplus.com/Docs/Walkera_Wk-0701_PCM.pdf)
|
||||
|
||||
Signal pulses:
|
||||
(ANALOG)
|
||||
SYNC BIN OCT
|
||||
+---------+ +------+
|
||||
| | | |
|
||||
--+ +------+ +---
|
||||
|
||||
Frame:
|
||||
SYNC , BIN1, OCT1, BIN2, OCT2 ... BIN24, OCT24, BIN25, next frame SYNC ..
|
||||
|
||||
pulse length:
|
||||
Binary values: Analog octal values:
|
||||
|
||||
288 uS Binary 0 318 uS 000
|
||||
438 uS Binary 1 398 uS 001
|
||||
478 uS 010
|
||||
558 uS 011
|
||||
638 uS 100
|
||||
1306 uS SYNC 718 uS 101
|
||||
798 uS 110
|
||||
878 uS 111
|
||||
|
||||
24 bin+oct values + 1 bin value = 24*4+1 bits = 97 bits
|
||||
|
||||
(Warning, pulses on ACK ar inverted by transistor, irq is rised up on sync
|
||||
to bin change or octal value to bin change).
|
||||
|
||||
Binary data representations:
|
||||
|
||||
One binary and octal value can be grouped to nibble. 24 nibbles + one binary
|
||||
values can be sampled between sync pulses.
|
||||
|
||||
Values for first four channels (analog joystick values) can be found in
|
||||
first 10 nibbles. Analog value is represented by one sign bit and 9 bit
|
||||
absolute binary value. (10 bits per channel). Next nibble is checksum for
|
||||
first ten nibbles.
|
||||
|
||||
Next nibbles 12 .. 21 represents four channels (not all channels can be
|
||||
directly controlled from TX). Binary representations ar the same as in first
|
||||
four channels. In nibbles 22 and 23 is a special magic number. Nibble 24 is
|
||||
checksum for nibbles 12..23.
|
||||
|
||||
After last octal value for nibble 24 and next sync pulse one additional
|
||||
binary value can be sampled. This bit and magic number is not used in
|
||||
software driver. Some details about this magic numbers can be found in
|
||||
Walkera_Wk-0701_PCM.pdf.
|
||||
|
||||
Checksum calculation:
|
||||
|
||||
Summary of octal values in nibbles must be same as octal value in checksum
|
||||
nibble (only first 3 bits are used). Binary value for checksum nibble is
|
||||
calculated by sum of binary values in checked nibbles + sum of octal values
|
||||
in checked nibbles divided by 8. Only bit 0 of this sum is used.
|
||||
|
||||
@ -294,4 +294,16 @@ config JOYSTICK_XPAD_LEDS
|
||||
This option enables support for the LED which surrounds the Big X on
|
||||
XBox 360 controller.
|
||||
|
||||
config JOYSTICK_WALKERA0701
|
||||
tristate "Walkera WK-0701 RC transmitter"
|
||||
depends on HIGH_RES_TIMERS && PARPORT
|
||||
help
|
||||
Say Y or M here if you have a Walkera WK-0701 transmitter which is
|
||||
supplied with a ready to fly Walkera helicopters such as HM36,
|
||||
HM37, HM60 and want to use it via parport as a joystick. More
|
||||
information is available: <file:Documentation/input/walkera0701.txt>
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called walkera0701.
|
||||
|
||||
endif
|
||||
|
||||
@ -29,4 +29,5 @@ obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o
|
||||
obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o
|
||||
obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o
|
||||
obj-$(CONFIG_JOYSTICK_ZHENHUA) += zhenhua.o
|
||||
obj-$(CONFIG_JOYSTICK_WALKERA0701) += walkera0701.o
|
||||
|
||||
|
||||
292
drivers/input/joystick/walkera0701.c
Normal file
292
drivers/input/joystick/walkera0701.c
Normal file
@ -0,0 +1,292 @@
|
||||
/*
|
||||
* Parallel port to Walkera WK-0701 TX joystick
|
||||
*
|
||||
* Copyright (c) 2008 Peter Popovec
|
||||
*
|
||||
* More about driver: <file:Documentation/input/walkera0701.txt>
|
||||
*/
|
||||
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/* #define WK0701_DEBUG */
|
||||
|
||||
#define RESERVE 20000
|
||||
#define SYNC_PULSE 1306000
|
||||
#define BIN0_PULSE 288000
|
||||
#define BIN1_PULSE 438000
|
||||
|
||||
#define ANALOG_MIN_PULSE 318000
|
||||
#define ANALOG_MAX_PULSE 878000
|
||||
#define ANALOG_DELTA 80000
|
||||
|
||||
#define BIN_SAMPLE ((BIN0_PULSE + BIN1_PULSE) / 2)
|
||||
|
||||
#define NO_SYNC 25
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/parport.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/hrtimer.h>
|
||||
|
||||
MODULE_AUTHOR("Peter Popovec <popovec@fei.tuke.sk>");
|
||||
MODULE_DESCRIPTION("Walkera WK-0701 TX as joystick");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
static unsigned int walkera0701_pp_no;
|
||||
module_param_named(port, walkera0701_pp_no, int, 0);
|
||||
MODULE_PARM_DESC(port,
|
||||
"Parallel port adapter for Walkera WK-0701 TX (default is 0)");
|
||||
|
||||
/*
|
||||
* For now, only one device is supported, if somebody need more devices, code
|
||||
* can be expanded, one struct walkera_dev per device must be allocated and
|
||||
* set up by walkera0701_connect (release of device by walkera0701_disconnect)
|
||||
*/
|
||||
|
||||
struct walkera_dev {
|
||||
unsigned char buf[25];
|
||||
u64 irq_time, irq_lasttime;
|
||||
int counter;
|
||||
int ack;
|
||||
|
||||
struct input_dev *input_dev;
|
||||
struct hrtimer timer;
|
||||
|
||||
struct parport *parport;
|
||||
struct pardevice *pardevice;
|
||||
};
|
||||
|
||||
static struct walkera_dev w_dev;
|
||||
|
||||
static inline void walkera0701_parse_frame(struct walkera_dev *w)
|
||||
{
|
||||
int i;
|
||||
int val1, val2, val3, val4, val5, val6, val7, val8;
|
||||
int crc1, crc2;
|
||||
|
||||
for (crc1 = crc2 = i = 0; i < 10; i++) {
|
||||
crc1 += w->buf[i] & 7;
|
||||
crc2 += (w->buf[i] & 8) >> 3;
|
||||
}
|
||||
if ((w->buf[10] & 7) != (crc1 & 7))
|
||||
return;
|
||||
if (((w->buf[10] & 8) >> 3) != (((crc1 >> 3) + crc2) & 1))
|
||||
return;
|
||||
for (crc1 = crc2 = 0, i = 11; i < 23; i++) {
|
||||
crc1 += w->buf[i] & 7;
|
||||
crc2 += (w->buf[i] & 8) >> 3;
|
||||
}
|
||||
if ((w->buf[23] & 7) != (crc1 & 7))
|
||||
return;
|
||||
if (((w->buf[23] & 8) >> 3) != (((crc1 >> 3) + crc2) & 1))
|
||||
return;
|
||||
val1 = ((w->buf[0] & 7) * 256 + w->buf[1] * 16 + w->buf[2]) >> 2;
|
||||
val1 *= ((w->buf[0] >> 2) & 2) - 1; /* sign */
|
||||
val2 = (w->buf[2] & 1) << 8 | (w->buf[3] << 4) | w->buf[4];
|
||||
val2 *= (w->buf[2] & 2) - 1; /* sign */
|
||||
val3 = ((w->buf[5] & 7) * 256 + w->buf[6] * 16 + w->buf[7]) >> 2;
|
||||
val3 *= ((w->buf[5] >> 2) & 2) - 1; /* sign */
|
||||
val4 = (w->buf[7] & 1) << 8 | (w->buf[8] << 4) | w->buf[9];
|
||||
val4 *= (w->buf[7] & 2) - 1; /* sign */
|
||||
val5 = ((w->buf[11] & 7) * 256 + w->buf[12] * 16 + w->buf[13]) >> 2;
|
||||
val5 *= ((w->buf[11] >> 2) & 2) - 1; /* sign */
|
||||
val6 = (w->buf[13] & 1) << 8 | (w->buf[14] << 4) | w->buf[15];
|
||||
val6 *= (w->buf[13] & 2) - 1; /* sign */
|
||||
val7 = ((w->buf[16] & 7) * 256 + w->buf[17] * 16 + w->buf[18]) >> 2;
|
||||
val7 *= ((w->buf[16] >> 2) & 2) - 1; /*sign */
|
||||
val8 = (w->buf[18] & 1) << 8 | (w->buf[19] << 4) | w->buf[20];
|
||||
val8 *= (w->buf[18] & 2) - 1; /*sign */
|
||||
|
||||
#ifdef WK0701_DEBUG
|
||||
{
|
||||
int magic, magic_bit;
|
||||
magic = (w->buf[21] << 4) | w->buf[22];
|
||||
magic_bit = (w->buf[24] & 8) >> 3;
|
||||
printk(KERN_DEBUG
|
||||
"walkera0701: %4d %4d %4d %4d %4d %4d %4d %4d (magic %2x %d)\n",
|
||||
val1, val2, val3, val4, val5, val6, val7, val8, magic,
|
||||
magic_bit);
|
||||
}
|
||||
#endif
|
||||
input_report_abs(w->input_dev, ABS_X, val2);
|
||||
input_report_abs(w->input_dev, ABS_Y, val1);
|
||||
input_report_abs(w->input_dev, ABS_Z, val6);
|
||||
input_report_abs(w->input_dev, ABS_THROTTLE, val3);
|
||||
input_report_abs(w->input_dev, ABS_RUDDER, val4);
|
||||
input_report_abs(w->input_dev, ABS_MISC, val7);
|
||||
input_report_key(w->input_dev, BTN_GEAR_DOWN, val5 > 0);
|
||||
}
|
||||
|
||||
static inline int read_ack(struct pardevice *p)
|
||||
{
|
||||
return parport_read_status(p->port) & 0x40;
|
||||
}
|
||||
|
||||
/* falling edge, prepare to BIN value calculation */
|
||||
static void walkera0701_irq_handler(void *handler_data)
|
||||
{
|
||||
u64 pulse_time;
|
||||
struct walkera_dev *w = handler_data;
|
||||
|
||||
w->irq_time = ktime_to_ns(ktime_get());
|
||||
pulse_time = w->irq_time - w->irq_lasttime;
|
||||
w->irq_lasttime = w->irq_time;
|
||||
|
||||
/* cancel timer, if in handler or active do resync */
|
||||
if (unlikely(0 != hrtimer_try_to_cancel(&w->timer))) {
|
||||
w->counter = NO_SYNC;
|
||||
return;
|
||||
}
|
||||
|
||||
if (w->counter < NO_SYNC) {
|
||||
if (w->ack) {
|
||||
pulse_time -= BIN1_PULSE;
|
||||
w->buf[w->counter] = 8;
|
||||
} else {
|
||||
pulse_time -= BIN0_PULSE;
|
||||
w->buf[w->counter] = 0;
|
||||
}
|
||||
if (w->counter == 24) { /* full frame */
|
||||
walkera0701_parse_frame(w);
|
||||
w->counter = NO_SYNC;
|
||||
if (abs(pulse_time - SYNC_PULSE) < RESERVE) /* new frame sync */
|
||||
w->counter = 0;
|
||||
} else {
|
||||
if ((pulse_time > (ANALOG_MIN_PULSE - RESERVE)
|
||||
&& (pulse_time < (ANALOG_MAX_PULSE + RESERVE)))) {
|
||||
pulse_time -= (ANALOG_MIN_PULSE - RESERVE);
|
||||
pulse_time = (u32) pulse_time / ANALOG_DELTA; /* overtiping is safe, pulsetime < s32.. */
|
||||
w->buf[w->counter++] |= (pulse_time & 7);
|
||||
} else
|
||||
w->counter = NO_SYNC;
|
||||
}
|
||||
} else if (abs(pulse_time - SYNC_PULSE - BIN0_PULSE) <
|
||||
RESERVE + BIN1_PULSE - BIN0_PULSE) /* frame sync .. */
|
||||
w->counter = 0;
|
||||
|
||||
hrtimer_start(&w->timer, ktime_set(0, BIN_SAMPLE), HRTIMER_MODE_REL);
|
||||
}
|
||||
|
||||
static enum hrtimer_restart timer_handler(struct hrtimer
|
||||
*handle)
|
||||
{
|
||||
struct walkera_dev *w;
|
||||
|
||||
w = container_of(handle, struct walkera_dev, timer);
|
||||
w->ack = read_ack(w->pardevice);
|
||||
|
||||
return HRTIMER_NORESTART;
|
||||
}
|
||||
|
||||
static int walkera0701_open(struct input_dev *dev)
|
||||
{
|
||||
struct walkera_dev *w = input_get_drvdata(dev);
|
||||
|
||||
parport_enable_irq(w->parport);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void walkera0701_close(struct input_dev *dev)
|
||||
{
|
||||
struct walkera_dev *w = input_get_drvdata(dev);
|
||||
|
||||
parport_disable_irq(w->parport);
|
||||
}
|
||||
|
||||
static int walkera0701_connect(struct walkera_dev *w, int parport)
|
||||
{
|
||||
int err = -ENODEV;
|
||||
|
||||
w->parport = parport_find_number(parport);
|
||||
if (w->parport == NULL)
|
||||
return -ENODEV;
|
||||
|
||||
if (w->parport->irq == -1) {
|
||||
printk(KERN_ERR "walkera0701: parport without interrupt\n");
|
||||
goto init_err;
|
||||
}
|
||||
|
||||
err = -EBUSY;
|
||||
w->pardevice = parport_register_device(w->parport, "walkera0701",
|
||||
NULL, NULL, walkera0701_irq_handler,
|
||||
PARPORT_DEV_EXCL, w);
|
||||
if (!w->pardevice)
|
||||
goto init_err;
|
||||
|
||||
if (parport_negotiate(w->pardevice->port, IEEE1284_MODE_COMPAT))
|
||||
goto init_err1;
|
||||
|
||||
if (parport_claim(w->pardevice))
|
||||
goto init_err1;
|
||||
|
||||
w->input_dev = input_allocate_device();
|
||||
if (!w->input_dev)
|
||||
goto init_err2;
|
||||
|
||||
input_set_drvdata(w->input_dev, w);
|
||||
w->input_dev->name = "Walkera WK-0701 TX";
|
||||
w->input_dev->phys = w->parport->name;
|
||||
w->input_dev->id.bustype = BUS_PARPORT;
|
||||
|
||||
/* TODO what id vendor/product/version ? */
|
||||
w->input_dev->id.vendor = 0x0001;
|
||||
w->input_dev->id.product = 0x0001;
|
||||
w->input_dev->id.version = 0x0100;
|
||||
w->input_dev->open = walkera0701_open;
|
||||
w->input_dev->close = walkera0701_close;
|
||||
|
||||
w->input_dev->evbit[0] = BIT(EV_ABS) | BIT_MASK(EV_KEY);
|
||||
w->input_dev->keybit[BIT_WORD(BTN_GEAR_DOWN)] = BIT_MASK(BTN_GEAR_DOWN);
|
||||
|
||||
input_set_abs_params(w->input_dev, ABS_X, -512, 512, 0, 0);
|
||||
input_set_abs_params(w->input_dev, ABS_Y, -512, 512, 0, 0);
|
||||
input_set_abs_params(w->input_dev, ABS_Z, -512, 512, 0, 0);
|
||||
input_set_abs_params(w->input_dev, ABS_THROTTLE, -512, 512, 0, 0);
|
||||
input_set_abs_params(w->input_dev, ABS_RUDDER, -512, 512, 0, 0);
|
||||
input_set_abs_params(w->input_dev, ABS_MISC, -512, 512, 0, 0);
|
||||
|
||||
err = input_register_device(w->input_dev);
|
||||
if (err)
|
||||
goto init_err3;
|
||||
|
||||
hrtimer_init(&w->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
|
||||
w->timer.function = timer_handler;
|
||||
return 0;
|
||||
|
||||
init_err3:
|
||||
input_free_device(w->input_dev);
|
||||
init_err2:
|
||||
parport_release(w->pardevice);
|
||||
init_err1:
|
||||
parport_unregister_device(w->pardevice);
|
||||
init_err:
|
||||
parport_put_port(w->parport);
|
||||
return err;
|
||||
}
|
||||
|
||||
static void walkera0701_disconnect(struct walkera_dev *w)
|
||||
{
|
||||
hrtimer_cancel(&w->timer);
|
||||
input_unregister_device(w->input_dev);
|
||||
parport_release(w->pardevice);
|
||||
parport_unregister_device(w->pardevice);
|
||||
parport_put_port(w->parport);
|
||||
}
|
||||
|
||||
static int __init walkera0701_init(void)
|
||||
{
|
||||
return walkera0701_connect(&w_dev, walkera0701_pp_no);
|
||||
}
|
||||
|
||||
static void __exit walkera0701_exit(void)
|
||||
{
|
||||
walkera0701_disconnect(&w_dev);
|
||||
}
|
||||
|
||||
module_init(walkera0701_init);
|
||||
module_exit(walkera0701_exit);
|
||||
Loading…
Reference in New Issue
Block a user