korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-17 01:04:19 +08:00
Code Issues Packages Projects Releases Wiki Activity

ARM: mx5/babbage: Use gpio_request_one in babbage_fec_reset

Browse Source 
Current code inside babbage_fec_reset uses gpio_direction_output with initial value of the GPIO and also sets
the GPIO value via gpio_set_value to the same level right after. This is not needed.

By using gpio_request_one it is possible to set the direction and initial value in one shot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
Fabio Estevam 2011-03-16 22:52:31 -03:00 committed by Sascha Hauer
parent 14fb20c9d2
commit ce191e415c
1 changed files with 2 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
arch/arm/mach-mx5/board-mx51_babbage.c
View File

@ -228,13 +228,12 @@ static inline void babbage_fec_reset(void)
int ret;
/* reset FEC PHY */
ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset");
ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
GPIOF_OUT_INIT_LOW, "fec-phy-reset");
if (ret) {
printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
return;
}
gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0);
gpio_set_value(BABBAGE_FEC_PHY_RESET, 0);
msleep(1);
gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
}