irqchip/meson-gpio: support more than 8 channels gpio irq

Current meson gpio irqchip driver only support 8 channels for gpio irq
line, later chips may have more then 8 channels, so need to modify code
to support more.

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220225055207.1048-3-qianggui.song@amlogic.com
This commit is contained in:
Qianggui Song 2022-02-25 13:52:04 +08:00 committed by Marc Zyngier
parent d6a3be863d
commit cc311074f6

View File

@ -16,7 +16,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#define NUM_CHANNEL 8
#define MAX_NUM_CHANNEL 64
#define MAX_INPUT_MUX 256
#define REG_EDGE_POL 0x00
@ -60,6 +60,7 @@ struct irq_ctl_ops {
struct meson_gpio_irq_params {
unsigned int nr_hwirq;
unsigned int nr_channels;
bool support_edge_both;
unsigned int edge_both_offset;
unsigned int edge_single_offset;
@ -81,6 +82,7 @@ struct meson_gpio_irq_params {
.edge_single_offset = 0, \
.pol_low_offset = 16, \
.pin_sel_mask = 0xff, \
.nr_channels = 8, \
#define INIT_MESON_A1_COMMON_DATA(irqs) \
INIT_MESON_COMMON(irqs, meson_a1_gpio_irq_init, \
@ -90,6 +92,7 @@ struct meson_gpio_irq_params {
.edge_single_offset = 8, \
.pol_low_offset = 0, \
.pin_sel_mask = 0x7f, \
.nr_channels = 8, \
static const struct meson_gpio_irq_params meson8_params = {
INIT_MESON8_COMMON_DATA(134)
@ -136,8 +139,8 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
struct meson_gpio_irq_controller {
const struct meson_gpio_irq_params *params;
void __iomem *base;
u32 channel_irqs[NUM_CHANNEL];
DECLARE_BITMAP(channel_map, NUM_CHANNEL);
u32 channel_irqs[MAX_NUM_CHANNEL];
DECLARE_BITMAP(channel_map, MAX_NUM_CHANNEL);
spinlock_t lock;
};
@ -207,8 +210,8 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
spin_lock_irqsave(&ctl->lock, flags);
/* Find a free channel */
idx = find_first_zero_bit(ctl->channel_map, NUM_CHANNEL);
if (idx >= NUM_CHANNEL) {
idx = find_first_zero_bit(ctl->channel_map, ctl->params->nr_channels);
if (idx >= ctl->params->nr_channels) {
spin_unlock_irqrestore(&ctl->lock, flags);
pr_err("No channel available\n");
return -ENOSPC;
@ -450,10 +453,10 @@ static int meson_gpio_irq_parse_dt(struct device_node *node, struct meson_gpio_i
ret = of_property_read_variable_u32_array(node,
"amlogic,channel-interrupts",
ctl->channel_irqs,
NUM_CHANNEL,
NUM_CHANNEL);
ctl->params->nr_channels,
ctl->params->nr_channels);
if (ret < 0) {
pr_err("can't get %d channel interrupts\n", NUM_CHANNEL);
pr_err("can't get %d channel interrupts\n", ctl->params->nr_channels);
return ret;
}
@ -507,7 +510,7 @@ static int meson_gpio_irq_of_init(struct device_node *node, struct device_node *
}
pr_info("%d to %d gpio interrupt mux initialized\n",
ctl->params->nr_hwirq, NUM_CHANNEL);
ctl->params->nr_hwirq, ctl->params->nr_channels);
return 0;