m68k/mac: Replace macide driver with generic platform drivers

This allows m68k mac systems to switch from the deprecated IDE subsystem
to libata.

This was tested on my Quadra 630. I haven't tested it on my PowerBook 150
because I don't have a RAM adapter board for it. It appears that the
hardware I tested doesn't need macide_clear_irq() or macide_test_irq().
If it did, the generic driver would not have worked. It's possible that
those routines are needed for the PowerBook 150 but we can cross that
bridge if and when we come to it.

BTW, macide_clear_irq() appears to suffer from a race condition. The write
to the interrupt flags register could have unintended side effects as it
may alter other flag bits. Fortunately, all of the other bits are unused
by Linux. When tested on my Quadra 630, the assignment *ide_ifr &= ~0x20
was observed to have no effect on bit 5, so it may be redundant anyway.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Joshua Thompson <funaho@jurai.org>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/11a56b3317df3bb2ddc15fd29b40b6820e9c7444.1623287706.git.fthain@linux-m68k.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This commit is contained in:
Finn Thain 2021-06-10 11:15:06 +10:00 committed by Jens Axboe
parent 5c81212624
commit cabd10be0b
6 changed files with 14 additions and 188 deletions

View File

@ -319,7 +319,6 @@ CONFIG_IDE=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_MAC_IDE=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y

View File

@ -351,7 +351,6 @@ CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_GAYLE=y
CONFIG_BLK_DEV_BUDDHA=y
CONFIG_BLK_DEV_FALCON_IDE=y
CONFIG_BLK_DEV_MAC_IDE=y
CONFIG_BLK_DEV_Q40IDE=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y

View File

@ -933,13 +933,15 @@ static const struct resource mac_scsi_ccl_rsrc[] __initconst = {
},
};
static const struct resource mac_ide_quadra_rsrc[] __initconst = {
DEFINE_RES_MEM(0x50F1A000, 0x104),
static const struct resource mac_pata_quadra_rsrc[] __initconst = {
DEFINE_RES_MEM(0x50F1A000, 0x38),
DEFINE_RES_MEM(0x50F1A038, 0x04),
DEFINE_RES_IRQ(IRQ_NUBUS_F),
};
static const struct resource mac_ide_pb_rsrc[] __initconst = {
DEFINE_RES_MEM(0x50F1A000, 0x104),
static const struct resource mac_pata_pb_rsrc[] __initconst = {
DEFINE_RES_MEM(0x50F1A000, 0x38),
DEFINE_RES_MEM(0x50F1A038, 0x04),
DEFINE_RES_IRQ(IRQ_NUBUS_C),
};
@ -949,7 +951,7 @@ static const struct resource mac_pata_baboon_rsrc[] __initconst = {
DEFINE_RES_IRQ(IRQ_BABOON_1),
};
static const struct pata_platform_info mac_pata_baboon_data __initconst = {
static const struct pata_platform_info mac_pata_data __initconst = {
.ioport_shift = 2,
};
@ -1067,17 +1069,19 @@ int __init mac_platform_init(void)
switch (macintosh_config->ide_type) {
case MAC_IDE_QUADRA:
platform_device_register_simple("mac_ide", -1,
mac_ide_quadra_rsrc, ARRAY_SIZE(mac_ide_quadra_rsrc));
platform_device_register_resndata(NULL, "pata_platform", -1,
mac_pata_quadra_rsrc, ARRAY_SIZE(mac_pata_quadra_rsrc),
&mac_pata_data, sizeof(mac_pata_data));
break;
case MAC_IDE_PB:
platform_device_register_simple("mac_ide", -1,
mac_ide_pb_rsrc, ARRAY_SIZE(mac_ide_pb_rsrc));
platform_device_register_resndata(NULL, "pata_platform", -1,
mac_pata_pb_rsrc, ARRAY_SIZE(mac_pata_pb_rsrc),
&mac_pata_data, sizeof(mac_pata_data));
break;
case MAC_IDE_BABOON:
platform_device_register_resndata(NULL, "pata_platform", -1,
mac_pata_baboon_rsrc, ARRAY_SIZE(mac_pata_baboon_rsrc),
&mac_pata_baboon_data, sizeof(mac_pata_baboon_data));
&mac_pata_data, sizeof(mac_pata_data));
break;
}

View File

@ -739,20 +739,6 @@ config BLK_DEV_FALCON_IDE
disks, CD-ROM drives, etc.) that are connected to the on-board IDE
interface.
config BLK_DEV_MAC_IDE
tristate "Macintosh Quadra/Powerbook IDE interface support"
depends on MAC
help
This is the IDE driver for the on-board IDE interface on some m68k
Macintosh models, namely Quadra/Centris 630, Performa 588 and
Powerbook 150. The IDE interface on the Powerbook 190 is not
supported by this driver and requires BLK_DEV_PLATFORM or
PATA_PLATFORM.
Say Y if you have such an Macintosh model and want to use IDE
devices (hard disks, CD-ROM drives, etc.) that are connected to the
on-board IDE interface.
config BLK_DEV_Q40IDE
tristate "Q40/Q60 IDE interface support"
depends on Q40

View File

@ -29,7 +29,6 @@ obj-$(CONFIG_BLK_DEV_4DRIVES) += ide-4drives.o
obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o
obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o
obj-$(CONFIG_BLK_DEV_MAC_IDE) += macide.o
obj-$(CONFIG_BLK_DEV_Q40IDE) += q40ide.o
obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o

View File

@ -1,161 +0,0 @@
/*
* Macintosh IDE Driver
*
* Copyright (C) 1998 by Michael Schmitz
*
* This driver was written based on information obtained from the MacOS IDE
* driver binary by Mikael Forselius
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <asm/macintosh.h>
#define DRV_NAME "mac_ide"
#define IDE_BASE 0x50F1A000 /* Base address of IDE controller */
/*
* Generic IDE registers as offsets from the base
* These match MkLinux so they should be correct.
*/
#define IDE_CONTROL 0x38 /* control/altstatus */
/*
* Mac-specific registers
*/
/*
* this register is odd; it doesn't seem to do much and it's
* not word-aligned like virtually every other hardware register
* on the Mac...
*/
#define IDE_IFR 0x101 /* (0x101) IDE interrupt flags on Quadra:
*
* Bit 0+1: some interrupt flags
* Bit 2+3: some interrupt enable
* Bit 4: ??
* Bit 5: IDE interrupt flag (any hwif)
* Bit 6: maybe IDE interrupt enable (any hwif) ??
* Bit 7: Any interrupt condition
*/
volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
int macide_test_irq(ide_hwif_t *hwif)
{
if (*ide_ifr & 0x20)
return 1;
return 0;
}
static void macide_clear_irq(ide_drive_t *drive)
{
*ide_ifr &= ~0x20;
}
static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
int irq)
{
int i;
memset(hw, 0, sizeof(*hw));
for (i = 0; i < 8; i++)
hw->io_ports_array[i] = base + i * 4;
hw->io_ports.ctl_addr = base + IDE_CONTROL;
hw->irq = irq;
}
static const struct ide_port_ops macide_port_ops = {
.clear_irq = macide_clear_irq,
.test_irq = macide_test_irq,
};
static const struct ide_port_info macide_port_info = {
.port_ops = &macide_port_ops,
.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
.irq_flags = IRQF_SHARED,
.chipset = ide_generic,
};
static const char *mac_ide_name[] =
{ "Quadra", "Powerbook", "Powerbook Baboon" };
/*
* Probe for a Macintosh IDE interface
*/
static int mac_ide_probe(struct platform_device *pdev)
{
struct resource *mem, *irq;
struct ide_hw hw, *hws[] = { &hw };
struct ide_port_info d = macide_port_info;
struct ide_host *host;
int rc;
if (!MACH_IS_MAC)
return -ENODEV;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem)
return -ENODEV;
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq)
return -ENODEV;
if (!devm_request_mem_region(&pdev->dev, mem->start,
resource_size(mem), DRV_NAME)) {
dev_err(&pdev->dev, "resources busy\n");
return -EBUSY;
}
printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
mac_ide_name[macintosh_config->ide_type - 1]);
macide_setup_ports(&hw, mem->start, irq->start);
rc = ide_host_add(&d, hws, 1, &host);
if (rc)
return rc;
platform_set_drvdata(pdev, host);
return 0;
}
static int mac_ide_remove(struct platform_device *pdev)
{
struct ide_host *host = platform_get_drvdata(pdev);
ide_host_remove(host);
return 0;
}
static struct platform_driver mac_ide_driver = {
.driver = {
.name = DRV_NAME,
},
.probe = mac_ide_probe,
.remove = mac_ide_remove,
};
module_platform_driver(mac_ide_driver);
MODULE_ALIAS("platform:" DRV_NAME);
MODULE_LICENSE("GPL");