diff --git a/lib/test_firmware.c b/lib/test_firmware.c
index 09371b0a9baf..64a4c76cba2b 100644
--- a/lib/test_firmware.c
+++ b/lib/test_firmware.c
@@ -19,10 +19,85 @@
 #include <linux/miscdevice.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+
+#define TEST_FIRMWARE_NAME	"test-firmware.bin"
+#define TEST_FIRMWARE_NUM_REQS	4
 
 static DEFINE_MUTEX(test_fw_mutex);
 static const struct firmware *test_firmware;
 
+struct test_batched_req {
+	u8 idx;
+	int rc;
+	bool sent;
+	const struct firmware *fw;
+	const char *name;
+	struct completion completion;
+	struct task_struct *task;
+	struct device *dev;
+};
+
+/**
+ * test_config - represents configuration for the test for different triggers
+ *
+ * @name: the name of the firmware file to look for
+ * @sync_direct: when the sync trigger is used if this is true
+ *	request_firmware_direct() will be used instead.
+ * @send_uevent: whether or not to send a uevent for async requests
+ * @num_requests: number of requests to try per test case. This is trigger
+ *	specific.
+ * @reqs: stores all requests information
+ * @read_fw_idx: index of thread from which we want to read firmware results
+ *	from through the read_fw trigger.
+ * @test_result: a test may use this to collect the result from the call
+ *	of the request_firmware*() calls used in their tests. In order of
+ *	priority we always keep first any setup error. If no setup errors were
+ *	found then we move on to the first error encountered while running the
+ *	API. Note that for async calls this typically will be a successful
+ *	result (0) unless of course you've used bogus parameters, or the system
+ *	is out of memory.  In the async case the callback is expected to do a
+ *	bit more homework to figure out what happened, unfortunately the only
+ *	information passed today on error is the fact that no firmware was
+ *	found so we can only assume -ENOENT on async calls if the firmware is
+ *	NULL.
+ *
+ *	Errors you can expect:
+ *
+ *	API specific:
+ *
+ *	0:		success for sync, for async it means request was sent
+ *	-EINVAL:	invalid parameters or request
+ *	-ENOENT:	files not found
+ *
+ *	System environment:
+ *
+ *	-ENOMEM:	memory pressure on system
+ *	-ENODEV:	out of number of devices to test
+ *	-EINVAL:	an unexpected error has occurred
+ * @req_firmware: if @sync_direct is true this is set to
+ *	request_firmware_direct(), otherwise request_firmware()
+ */
+struct test_config {
+	char *name;
+	bool sync_direct;
+	bool send_uevent;
+	u8 num_requests;
+	u8 read_fw_idx;
+
+	/*
+	 * These below don't belong her but we'll move them once we create
+	 * a struct fw_test_device and stuff the misc_dev under there later.
+	 */
+	struct test_batched_req *reqs;
+	int test_result;
+	int (*req_firmware)(const struct firmware **fw, const char *name,
+			    struct device *device);
+};
+
+struct test_config *test_fw_config;
+
 static ssize_t test_fw_misc_read(struct file *f, char __user *buf,
 				 size_t size, loff_t *offset)
 {
@@ -42,6 +117,338 @@ static const struct file_operations test_fw_fops = {
 	.read           = test_fw_misc_read,
 };
 
+static void __test_release_all_firmware(void)
+{
+	struct test_batched_req *req;
+	u8 i;
+
+	if (!test_fw_config->reqs)
+		return;
+
+	for (i = 0; i < test_fw_config->num_requests; i++) {
+		req = &test_fw_config->reqs[i];
+		if (req->fw)
+			release_firmware(req->fw);
+	}
+
+	vfree(test_fw_config->reqs);
+	test_fw_config->reqs = NULL;
+}
+
+static void test_release_all_firmware(void)
+{
+	mutex_lock(&test_fw_mutex);
+	__test_release_all_firmware();
+	mutex_unlock(&test_fw_mutex);
+}
+
+
+static void __test_firmware_config_free(void)
+{
+	__test_release_all_firmware();
+	kfree_const(test_fw_config->name);
+	test_fw_config->name = NULL;
+}
+
+/*
+ * XXX: move to kstrncpy() once merged.
+ *
+ * Users should use kfree_const() when freeing these.
+ */
+static int __kstrncpy(char **dst, const char *name, size_t count, gfp_t gfp)
+{
+	*dst = kstrndup(name, count, gfp);
+	if (!*dst)
+		return -ENOSPC;
+	return count;
+}
+
+static int __test_firmware_config_init(void)
+{
+	int ret;
+
+	ret = __kstrncpy(&test_fw_config->name, TEST_FIRMWARE_NAME,
+			 strlen(TEST_FIRMWARE_NAME), GFP_KERNEL);
+	if (ret < 0)
+		goto out;
+
+	test_fw_config->num_requests = TEST_FIRMWARE_NUM_REQS;
+	test_fw_config->send_uevent = true;
+	test_fw_config->sync_direct = false;
+	test_fw_config->req_firmware = request_firmware;
+	test_fw_config->test_result = 0;
+	test_fw_config->reqs = NULL;
+
+	return 0;
+
+out:
+	__test_firmware_config_free();
+	return ret;
+}
+
+static ssize_t reset_store(struct device *dev,
+			   struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	int ret;
+
+	mutex_lock(&test_fw_mutex);
+
+	__test_firmware_config_free();
+
+	ret = __test_firmware_config_init();
+	if (ret < 0) {
+		ret = -ENOMEM;
+		pr_err("could not alloc settings for config trigger: %d\n",
+		       ret);
+		goto out;
+	}
+
+	pr_info("reset\n");
+	ret = count;
+
+out:
+	mutex_unlock(&test_fw_mutex);
+
+	return ret;
+}
+static DEVICE_ATTR_WO(reset);
+
+static ssize_t config_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	int len = 0;
+
+	mutex_lock(&test_fw_mutex);
+
+	len += snprintf(buf, PAGE_SIZE,
+			"Custom trigger configuration for: %s\n",
+			dev_name(dev));
+
+	if (test_fw_config->name)
+		len += snprintf(buf+len, PAGE_SIZE,
+				"name:\t%s\n",
+				test_fw_config->name);
+	else
+		len += snprintf(buf+len, PAGE_SIZE,
+				"name:\tEMTPY\n");
+
+	len += snprintf(buf+len, PAGE_SIZE,
+			"num_requests:\t%u\n", test_fw_config->num_requests);
+
+	len += snprintf(buf+len, PAGE_SIZE,
+			"send_uevent:\t\t%s\n",
+			test_fw_config->send_uevent ?
+			"FW_ACTION_HOTPLUG" :
+			"FW_ACTION_NOHOTPLUG");
+	len += snprintf(buf+len, PAGE_SIZE,
+			"sync_direct:\t\t%s\n",
+			test_fw_config->sync_direct ? "true" : "false");
+	len += snprintf(buf+len, PAGE_SIZE,
+			"read_fw_idx:\t%u\n", test_fw_config->read_fw_idx);
+
+	mutex_unlock(&test_fw_mutex);
+
+	return len;
+}
+static DEVICE_ATTR_RO(config);
+
+static ssize_t config_name_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	int ret;
+
+	mutex_lock(&test_fw_mutex);
+	kfree_const(test_fw_config->name);
+	ret = __kstrncpy(&test_fw_config->name, buf, count, GFP_KERNEL);
+	mutex_unlock(&test_fw_mutex);
+
+	return ret;
+}
+
+/*
+ * As per sysfs_kf_seq_show() the buf is max PAGE_SIZE.
+ */
+static ssize_t config_test_show_str(char *dst,
+				    char *src)
+{
+	int len;
+
+	mutex_lock(&test_fw_mutex);
+	len = snprintf(dst, PAGE_SIZE, "%s\n", src);
+	mutex_unlock(&test_fw_mutex);
+
+	return len;
+}
+
+static int test_dev_config_update_bool(const char *buf, size_t size,
+				       bool *cfg)
+{
+	int ret;
+
+	mutex_lock(&test_fw_mutex);
+	if (strtobool(buf, cfg) < 0)
+		ret = -EINVAL;
+	else
+		ret = size;
+	mutex_unlock(&test_fw_mutex);
+
+	return ret;
+}
+
+static ssize_t
+test_dev_config_show_bool(char *buf,
+			  bool config)
+{
+	bool val;
+
+	mutex_lock(&test_fw_mutex);
+	val = config;
+	mutex_unlock(&test_fw_mutex);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t test_dev_config_show_int(char *buf, int cfg)
+{
+	int val;
+
+	mutex_lock(&test_fw_mutex);
+	val = cfg;
+	mutex_unlock(&test_fw_mutex);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
+{
+	int ret;
+	long new;
+
+	ret = kstrtol(buf, 10, &new);
+	if (ret)
+		return ret;
+
+	if (new > U8_MAX)
+		return -EINVAL;
+
+	mutex_lock(&test_fw_mutex);
+	*(u8 *)cfg = new;
+	mutex_unlock(&test_fw_mutex);
+
+	/* Always return full write size even if we didn't consume all */
+	return size;
+}
+
+static ssize_t test_dev_config_show_u8(char *buf, u8 cfg)
+{
+	u8 val;
+
+	mutex_lock(&test_fw_mutex);
+	val = cfg;
+	mutex_unlock(&test_fw_mutex);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t config_name_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	return config_test_show_str(buf, test_fw_config->name);
+}
+static DEVICE_ATTR(config_name, 0644, config_name_show, config_name_store);
+
+static ssize_t config_num_requests_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	int rc;
+
+	mutex_lock(&test_fw_mutex);
+	if (test_fw_config->reqs) {
+		pr_err("Must call release_all_firmware prior to changing config\n");
+		rc = -EINVAL;
+		goto out;
+	}
+	mutex_unlock(&test_fw_mutex);
+
+	rc = test_dev_config_update_u8(buf, count,
+				       &test_fw_config->num_requests);
+
+out:
+	return rc;
+}
+
+static ssize_t config_num_requests_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	return test_dev_config_show_u8(buf, test_fw_config->num_requests);
+}
+static DEVICE_ATTR(config_num_requests, 0644, config_num_requests_show,
+		   config_num_requests_store);
+
+static ssize_t config_sync_direct_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	int rc = test_dev_config_update_bool(buf, count,
+					     &test_fw_config->sync_direct);
+
+	if (rc == count)
+		test_fw_config->req_firmware = test_fw_config->sync_direct ?
+				       request_firmware_direct :
+				       request_firmware;
+	return rc;
+}
+
+static ssize_t config_sync_direct_show(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	return test_dev_config_show_bool(buf, test_fw_config->sync_direct);
+}
+static DEVICE_ATTR(config_sync_direct, 0644, config_sync_direct_show,
+		   config_sync_direct_store);
+
+static ssize_t config_send_uevent_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	return test_dev_config_update_bool(buf, count,
+					   &test_fw_config->send_uevent);
+}
+
+static ssize_t config_send_uevent_show(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	return test_dev_config_show_bool(buf, test_fw_config->send_uevent);
+}
+static DEVICE_ATTR(config_send_uevent, 0644, config_send_uevent_show,
+		   config_send_uevent_store);
+
+static ssize_t config_read_fw_idx_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	return test_dev_config_update_u8(buf, count,
+					 &test_fw_config->read_fw_idx);
+}
+
+static ssize_t config_read_fw_idx_show(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	return test_dev_config_show_u8(buf, test_fw_config->read_fw_idx);
+}
+static DEVICE_ATTR(config_read_fw_idx, 0644, config_read_fw_idx_show,
+		   config_read_fw_idx_store);
+
+
 static ssize_t trigger_request_store(struct device *dev,
 				     struct device_attribute *attr,
 				     const char *buf, size_t count)
@@ -170,12 +577,301 @@ out:
 }
 static DEVICE_ATTR_WO(trigger_custom_fallback);
 
+static int test_fw_run_batch_request(void *data)
+{
+	struct test_batched_req *req = data;
+
+	if (!req) {
+		test_fw_config->test_result = -EINVAL;
+		return -EINVAL;
+	}
+
+	req->rc = test_fw_config->req_firmware(&req->fw, req->name, req->dev);
+	if (req->rc) {
+		pr_info("#%u: batched sync load failed: %d\n",
+			req->idx, req->rc);
+		if (!test_fw_config->test_result)
+			test_fw_config->test_result = req->rc;
+	} else if (req->fw) {
+		req->sent = true;
+		pr_info("#%u: batched sync loaded %zu\n",
+			req->idx, req->fw->size);
+	}
+	complete(&req->completion);
+
+	req->task = NULL;
+
+	return 0;
+}
+
+/*
+ * We use a kthread as otherwise the kernel serializes all our sync requests
+ * and we would not be able to mimic batched requests on a sync call. Batched
+ * requests on a sync call can for instance happen on a device driver when
+ * multiple cards are used and firmware loading happens outside of probe.
+ */
+static ssize_t trigger_batched_requests_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count)
+{
+	struct test_batched_req *req;
+	int rc;
+	u8 i;
+
+	mutex_lock(&test_fw_mutex);
+
+	test_fw_config->reqs = vzalloc(sizeof(struct test_batched_req) *
+				       test_fw_config->num_requests * 2);
+	if (!test_fw_config->reqs) {
+		rc = -ENOMEM;
+		goto out_unlock;
+	}
+
+	pr_info("batched sync firmware loading '%s' %u times\n",
+		test_fw_config->name, test_fw_config->num_requests);
+
+	for (i = 0; i < test_fw_config->num_requests; i++) {
+		req = &test_fw_config->reqs[i];
+		if (!req) {
+			WARN_ON(1);
+			rc = -ENOMEM;
+			goto out_bail;
+		}
+		req->fw = NULL;
+		req->idx = i;
+		req->name = test_fw_config->name;
+		req->dev = dev;
+		init_completion(&req->completion);
+		req->task = kthread_run(test_fw_run_batch_request, req,
+					     "%s-%u", KBUILD_MODNAME, req->idx);
+		if (!req->task || IS_ERR(req->task)) {
+			pr_err("Setting up thread %u failed\n", req->idx);
+			req->task = NULL;
+			rc = -ENOMEM;
+			goto out_bail;
+		}
+	}
+
+	rc = count;
+
+	/*
+	 * We require an explicit release to enable more time and delay of
+	 * calling release_firmware() to improve our chances of forcing a
+	 * batched request. If we instead called release_firmware() right away
+	 * then we might miss on an opportunity of having a successful firmware
+	 * request pass on the opportunity to be come a batched request.
+	 */
+
+out_bail:
+	for (i = 0; i < test_fw_config->num_requests; i++) {
+		req = &test_fw_config->reqs[i];
+		if (req->task || req->sent)
+			wait_for_completion(&req->completion);
+	}
+
+	/* Override any worker error if we had a general setup error */
+	if (rc < 0)
+		test_fw_config->test_result = rc;
+
+out_unlock:
+	mutex_unlock(&test_fw_mutex);
+
+	return rc;
+}
+static DEVICE_ATTR_WO(trigger_batched_requests);
+
+/*
+ * We wait for each callback to return with the lock held, no need to lock here
+ */
+static void trigger_batched_cb(const struct firmware *fw, void *context)
+{
+	struct test_batched_req *req = context;
+
+	if (!req) {
+		test_fw_config->test_result = -EINVAL;
+		return;
+	}
+
+	/* forces *some* batched requests to queue up */
+	if (!req->idx)
+		ssleep(2);
+
+	req->fw = fw;
+
+	/*
+	 * Unfortunately the firmware API gives us nothing other than a null FW
+	 * if the firmware was not found on async requests.  Best we can do is
+	 * just assume -ENOENT. A better API would pass the actual return
+	 * value to the callback.
+	 */
+	if (!fw && !test_fw_config->test_result)
+		test_fw_config->test_result = -ENOENT;
+
+	complete(&req->completion);
+}
+
+static
+ssize_t trigger_batched_requests_async_store(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf, size_t count)
+{
+	struct test_batched_req *req;
+	bool send_uevent;
+	int rc;
+	u8 i;
+
+	mutex_lock(&test_fw_mutex);
+
+	test_fw_config->reqs = vzalloc(sizeof(struct test_batched_req) *
+				       test_fw_config->num_requests * 2);
+	if (!test_fw_config->reqs) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	pr_info("batched loading '%s' custom fallback mechanism %u times\n",
+		test_fw_config->name, test_fw_config->num_requests);
+
+	send_uevent = test_fw_config->send_uevent ? FW_ACTION_HOTPLUG :
+		FW_ACTION_NOHOTPLUG;
+
+	for (i = 0; i < test_fw_config->num_requests; i++) {
+		req = &test_fw_config->reqs[i];
+		if (!req) {
+			WARN_ON(1);
+			goto out_bail;
+		}
+		req->name = test_fw_config->name;
+		req->fw = NULL;
+		req->idx = i;
+		init_completion(&req->completion);
+		rc = request_firmware_nowait(THIS_MODULE, send_uevent,
+					     req->name,
+					     dev, GFP_KERNEL, req,
+					     trigger_batched_cb);
+		if (rc) {
+			pr_info("#%u: batched async load failed setup: %d\n",
+				i, rc);
+			req->rc = rc;
+			goto out_bail;
+		} else
+			req->sent = true;
+	}
+
+	rc = count;
+
+out_bail:
+
+	/*
+	 * We require an explicit release to enable more time and delay of
+	 * calling release_firmware() to improve our chances of forcing a
+	 * batched request. If we instead called release_firmware() right away
+	 * then we might miss on an opportunity of having a successful firmware
+	 * request pass on the opportunity to be come a batched request.
+	 */
+
+	for (i = 0; i < test_fw_config->num_requests; i++) {
+		req = &test_fw_config->reqs[i];
+		if (req->sent)
+			wait_for_completion(&req->completion);
+	}
+
+	/* Override any worker error if we had a general setup error */
+	if (rc < 0)
+		test_fw_config->test_result = rc;
+
+out:
+	mutex_unlock(&test_fw_mutex);
+
+	return rc;
+}
+static DEVICE_ATTR_WO(trigger_batched_requests_async);
+
+static ssize_t test_result_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	return test_dev_config_show_int(buf, test_fw_config->test_result);
+}
+static DEVICE_ATTR_RO(test_result);
+
+static ssize_t release_all_firmware_store(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t count)
+{
+	test_release_all_firmware();
+	return count;
+}
+static DEVICE_ATTR_WO(release_all_firmware);
+
+static ssize_t read_firmware_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	struct test_batched_req *req;
+	u8 idx;
+	ssize_t rc = 0;
+
+	mutex_lock(&test_fw_mutex);
+
+	idx = test_fw_config->read_fw_idx;
+	if (idx >= test_fw_config->num_requests) {
+		rc = -ERANGE;
+		goto out;
+	}
+
+	if (!test_fw_config->reqs) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	req = &test_fw_config->reqs[idx];
+	if (!req->fw) {
+		pr_err("#%u: failed to async load firmware\n", idx);
+		rc = -ENOENT;
+		goto out;
+	}
+
+	pr_info("#%u: loaded %zu\n", idx, req->fw->size);
+
+	if (req->fw->size > PAGE_SIZE) {
+		pr_err("Testing interface must use PAGE_SIZE firmware for now\n");
+		rc = -EINVAL;
+	}
+	memcpy(buf, req->fw->data, req->fw->size);
+
+	rc = req->fw->size;
+out:
+	mutex_unlock(&test_fw_mutex);
+
+	return rc;
+}
+static DEVICE_ATTR_RO(read_firmware);
+
 #define TEST_FW_DEV_ATTR(name)          &dev_attr_##name.attr
 
 static struct attribute *test_dev_attrs[] = {
+	TEST_FW_DEV_ATTR(reset),
+
+	TEST_FW_DEV_ATTR(config),
+	TEST_FW_DEV_ATTR(config_name),
+	TEST_FW_DEV_ATTR(config_num_requests),
+	TEST_FW_DEV_ATTR(config_sync_direct),
+	TEST_FW_DEV_ATTR(config_send_uevent),
+	TEST_FW_DEV_ATTR(config_read_fw_idx),
+
+	/* These don't use the config at all - they could be ported! */
 	TEST_FW_DEV_ATTR(trigger_request),
 	TEST_FW_DEV_ATTR(trigger_async_request),
 	TEST_FW_DEV_ATTR(trigger_custom_fallback),
+
+	/* These use the config and can use the test_result */
+	TEST_FW_DEV_ATTR(trigger_batched_requests),
+	TEST_FW_DEV_ATTR(trigger_batched_requests_async),
+
+	TEST_FW_DEV_ATTR(release_all_firmware),
+	TEST_FW_DEV_ATTR(test_result),
+	TEST_FW_DEV_ATTR(read_firmware),
 	NULL,
 };
 
@@ -192,8 +888,17 @@ static int __init test_firmware_init(void)
 {
 	int rc;
 
+	test_fw_config = kzalloc(sizeof(struct test_config), GFP_KERNEL);
+	if (!test_fw_config)
+		return -ENOMEM;
+
+	rc = __test_firmware_config_init();
+	if (rc)
+		return rc;
+
 	rc = misc_register(&test_fw_misc_device);
 	if (rc) {
+		kfree(test_fw_config);
 		pr_err("could not register misc device: %d\n", rc);
 		return rc;
 	}
@@ -207,8 +912,13 @@ module_init(test_firmware_init);
 
 static void __exit test_firmware_exit(void)
 {
+	mutex_lock(&test_fw_mutex);
 	release_firmware(test_firmware);
 	misc_deregister(&test_fw_misc_device);
+	__test_firmware_config_free();
+	kfree(test_fw_config);
+	mutex_unlock(&test_fw_mutex);
+
 	pr_warn("removed interface\n");
 }
 
diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh
index e35691239350..7d8fd2e3695a 100755
--- a/tools/testing/selftests/firmware/fw_filesystem.sh
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -25,8 +25,9 @@ if [ ! -d $DIR ]; then
 fi
 
 # CONFIG_FW_LOADER_USER_HELPER has a sysfs class under /sys/class/firmware/
-# These days no one enables CONFIG_FW_LOADER_USER_HELPER so check for that
-# as an indicator for CONFIG_FW_LOADER_USER_HELPER.
+# These days most distros enable CONFIG_FW_LOADER_USER_HELPER but disable
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK. We use /sys/class/firmware/ as an
+# indicator for CONFIG_FW_LOADER_USER_HELPER.
 HAS_FW_LOADER_USER_HELPER=$(if [ -d /sys/class/firmware/ ]; then echo yes; else echo no; fi)
 
 if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
@@ -116,4 +117,240 @@ else
 	echo "$0: async filesystem loading works"
 fi
 
+### Batched requests tests
+test_config_present()
+{
+	if [ ! -f $DIR/reset ]; then
+		echo "Configuration triggers not present, ignoring test"
+		exit 0
+	fi
+}
+
+# Defaults :
+#
+# send_uevent: 1
+# sync_direct: 0
+# name: test-firmware.bin
+# num_requests: 4
+config_reset()
+{
+	echo 1 >  $DIR/reset
+}
+
+release_all_firmware()
+{
+	echo 1 >  $DIR/release_all_firmware
+}
+
+config_set_name()
+{
+	echo -n $1 >  $DIR/config_name
+}
+
+config_set_sync_direct()
+{
+	echo 1 >  $DIR/config_sync_direct
+}
+
+config_unset_sync_direct()
+{
+	echo 0 >  $DIR/config_sync_direct
+}
+
+config_set_uevent()
+{
+	echo 1 >  $DIR/config_send_uevent
+}
+
+config_unset_uevent()
+{
+	echo 0 >  $DIR/config_send_uevent
+}
+
+config_trigger_sync()
+{
+	echo -n 1 > $DIR/trigger_batched_requests 2>/dev/null
+}
+
+config_trigger_async()
+{
+	echo -n 1 > $DIR/trigger_batched_requests_async 2> /dev/null
+}
+
+config_set_read_fw_idx()
+{
+	echo -n $1 > $DIR/config_read_fw_idx 2> /dev/null
+}
+
+read_firmwares()
+{
+	for i in $(seq 0 3); do
+		config_set_read_fw_idx $i
+		# Verify the contents are what we expect.
+		# -Z required for now -- check for yourself, md5sum
+		# on $FW and DIR/read_firmware will yield the same. Even
+		# cmp agrees, so something is off.
+		if ! diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
+			echo "request #$i: firmware was not loaded" >&2
+			exit 1
+		fi
+	done
+}
+
+read_firmwares_expect_nofile()
+{
+	for i in $(seq 0 3); do
+		config_set_read_fw_idx $i
+		# Ensures contents differ
+		if diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
+			echo "request $i: file was not expected to match" >&2
+			exit 1
+		fi
+	done
+}
+
+test_batched_request_firmware_nofile()
+{
+	echo -n "Batched request_firmware() nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_trigger_sync
+	read_firmwares_expect_nofile
+	release_all_firmware
+	echo "OK"
+}
+
+test_batched_request_firmware_direct_nofile()
+{
+	echo -n "Batched request_firmware_direct() nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_set_sync_direct
+	config_trigger_sync
+	release_all_firmware
+	echo "OK"
+}
+
+test_request_firmware_nowait_uevent_nofile()
+{
+	echo -n "Batched request_firmware_nowait(uevent=true) nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_trigger_async
+	release_all_firmware
+	echo "OK"
+}
+
+test_wait_and_cancel_custom_load()
+{
+	if [ "$HAS_FW_LOADER_USER_HELPER" != "yes" ]; then
+		return
+	fi
+	local timeout=10
+	name=$1
+	while [ ! -e "$DIR"/"$name"/loading ]; do
+		sleep 0.1
+		timeout=$(( $timeout - 1 ))
+		if [ "$timeout" -eq 0 ]; then
+			echo "firmware interface never appeared:" >&2
+			echo "$DIR/$name/loading" >&2
+			exit 1
+		fi
+	done
+	echo -1 >"$DIR"/"$name"/loading
+}
+
+test_request_firmware_nowait_custom_nofile()
+{
+	echo -n "Batched request_firmware_nowait(uevent=false) nofile try #$1: "
+	config_unset_uevent
+	config_set_name nope-test-firmware.bin
+	config_trigger_async &
+	test_wait_and_cancel_custom_load nope-test-firmware.bin
+	wait
+	release_all_firmware
+	echo "OK"
+}
+
+test_batched_request_firmware()
+{
+	echo -n "Batched request_firmware() try #$1: "
+	config_reset
+	config_trigger_sync
+	read_firmwares
+	release_all_firmware
+	echo "OK"
+}
+
+test_batched_request_firmware_direct()
+{
+	echo -n "Batched request_firmware_direct() try #$1: "
+	config_reset
+	config_set_sync_direct
+	config_trigger_sync
+	release_all_firmware
+	echo "OK"
+}
+
+test_request_firmware_nowait_uevent()
+{
+	echo -n "Batched request_firmware_nowait(uevent=true) try #$1: "
+	config_reset
+	config_trigger_async
+	release_all_firmware
+	echo "OK"
+}
+
+test_request_firmware_nowait_custom()
+{
+	echo -n "Batched request_firmware_nowait(uevent=false) try #$1: "
+	config_unset_uevent
+	config_trigger_async
+	release_all_firmware
+	echo "OK"
+}
+
+# Only continue if batched request triggers are present on the
+# test-firmware driver
+test_config_present
+
+# test with the file present
+echo
+echo "Testing with the file present..."
+for i in $(seq 1 5); do
+	test_batched_request_firmware $i
+done
+
+for i in $(seq 1 5); do
+	test_batched_request_firmware_direct $i
+done
+
+for i in $(seq 1 5); do
+	test_request_firmware_nowait_uevent $i
+done
+
+for i in $(seq 1 5); do
+	test_request_firmware_nowait_custom $i
+done
+
+# Test for file not found, errors are expected, the failure would be
+# a hung task, which would require a hard reset.
+echo
+echo "Testing with the file missing..."
+for i in $(seq 1 5); do
+	test_batched_request_firmware_nofile $i
+done
+
+for i in $(seq 1 5); do
+	test_batched_request_firmware_direct_nofile $i
+done
+
+for i in $(seq 1 5); do
+	test_request_firmware_nowait_uevent_nofile $i
+done
+
+for i in $(seq 1 5); do
+	test_request_firmware_nowait_custom_nofile $i
+done
+
 exit 0