korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-11 12:28:41 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Browse Source 
Pull i2c fixes from Wolfram Sang:
 "Another bunch of fixes for I2C.

  Jean's i801 patch is a cleanup on top of Volker's i801 patch, but it
  will make dependency handling much easier if those two go together"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK
  i2c: mediatek: Send i2c master code at more than 1MHz
  i2c: mediatek: Fix generic definitions for bus frequency
  i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
  i2c: i801: Simplify the suspend callback
  i2c: i801: Fix resume bug
  i2c: aspeed: Mask IRQ status to relevant bits
This commit is contained in:
Linus Torvalds 2020-09-19 13:24:37 -07:00
commit c8d1a46f94
5 changed files with 29 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/i2c/busses/i2c-aspeed.c
View File

@ -69,6 +69,7 @@
* These share bit definitions, so use the same values for the enable &
* status bits.
*/
#define ASPEED_I2CD_INTR_RECV_MASK 0xf000ffff
#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14)
#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13)
#define ASPEED_I2CD_INTR_SLAVE_MATCH BIT(7)
@ -604,6 +605,7 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
bus->base + ASPEED_I2C_INTR_STS_REG);
readl(bus->base + ASPEED_I2C_INTR_STS_REG);
irq_received &= ASPEED_I2CD_INTR_RECV_MASK;
irq_remaining = irq_received;
#if IS_ENABLED(CONFIG_I2C_SLAVE)

26
drivers/i2c/busses/i2c-i801.c
View File

@ -1709,6 +1709,16 @@ static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; }
static inline void i801_acpi_remove(struct i801_priv *priv) { }
#endif
static unsigned char i801_setup_hstcfg(struct i801_priv *priv)
{
unsigned char hstcfg = priv->original_hstcfg;
hstcfg &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
hstcfg |= SMBHSTCFG_HST_EN;
pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
return hstcfg;
}
static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
unsigned char temp;
@ -1830,14 +1840,10 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
return err;
}
pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
priv->original_hstcfg = temp;
temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
if (!(temp & SMBHSTCFG_HST_EN)) {
pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg);
temp = i801_setup_hstcfg(priv);
if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN))
dev_info(&dev->dev, "Enabling SMBus device\n");
temp |= SMBHSTCFG_HST_EN;
}
pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
if (temp & SMBHSTCFG_SMB_SMI_EN) {
dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
@ -1952,10 +1958,9 @@ static void i801_shutdown(struct pci_dev *dev)
#ifdef CONFIG_PM_SLEEP
static int i801_suspend(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct i801_priv *priv = pci_get_drvdata(pci_dev);
struct i801_priv *priv = dev_get_drvdata(dev);
pci_write_config_byte(pci_dev, SMBHSTCFG, priv->original_hstcfg);
pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
return 0;
}
@ -1963,6 +1968,7 @@ static int i801_resume(struct device *dev)
{
struct i801_priv *priv = dev_get_drvdata(dev);
i801_setup_hstcfg(priv);
i801_enable_host_notify(&priv->adapter);
return 0;

6
drivers/i2c/busses/i2c-mt65xx.c
View File

@ -681,8 +681,8 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
unsigned int cnt_mul;
int ret = -EINVAL;
if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
target_speed = I2C_MAX_FAST_MODE_PLUS_FREQ;
if (target_speed > I2C_MAX_HIGH_SPEED_MODE_FREQ)
target_speed = I2C_MAX_HIGH_SPEED_MODE_FREQ;
max_step_cnt = mtk_i2c_max_step_cnt(target_speed);
base_step_cnt = max_step_cnt;
@ -759,7 +759,7 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
for (clk_div = 1; clk_div <= max_clk_div; clk_div++) {
clk_src = parent_clk / clk_div;
if (target_speed > I2C_MAX_FAST_MODE_FREQ) {
if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
/* Set master code speed register */
ret = mtk_i2c_calculate_speed(i2c, clk_src,
I2C_MAX_FAST_MODE_FREQ,

10
drivers/i2c/busses/i2c-mxs.c
View File

@ -25,6 +25,7 @@
#include <linux/of_device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/dma/mxs-dma.h>
#define DRIVER_NAME "mxs-i2c"
@ -200,7 +201,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
dma_map_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[0], 1,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
DMA_PREP_INTERRUPT |
MXS_DMA_CTRL_WAIT4END);
if (!desc) {
dev_err(i2c->dev,
"Failed to get DMA data write descriptor.\n");
@ -228,7 +230,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
dma_map_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[1], 1,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
DMA_PREP_INTERRUPT |
MXS_DMA_CTRL_WAIT4END);
if (!desc) {
dev_err(i2c->dev,
"Failed to get DMA data write descriptor.\n");
@ -260,7 +263,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
dma_map_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
desc = dmaengine_prep_slave_sg(i2c->dmach, i2c->sg_io, 2,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
DMA_PREP_INTERRUPT |
MXS_DMA_CTRL_WAIT4END);
if (!desc) {
dev_err(i2c->dev,
"Failed to get DMA data write descriptor.\n");

2
drivers/i2c/i2c-core-base.c
View File

@ -1464,8 +1464,8 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
/* create pre-declared device nodes */
of_i2c_register_devices(adap);
i2c_acpi_register_devices(adap);
i2c_acpi_install_space_handler(adap);
i2c_acpi_register_devices(adap);
if (adap->nr < __i2c_first_dynamic_bus_num)
i2c_scan_static_board_info(adap);