korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-04 17:44:14 +08:00
Code Issues Packages Projects Releases Wiki Activity

tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.

Browse Source 
In the logic around call to clk_round_rate(), for some corner conditions,
get_clk_div_rate() could return an sub-optimal clock rate. Also, if an
exact clock rate was not found lowest clock was being returned.

Search for suitable clock rate in 2 steps
a) exact match or within 2% tolerance
b) within 5% tolerance
This also takes care of corner conditions.

Fixes: c2194bc999 ("tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/1657911343-1909-1-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Vijaya Krishna Nivarthi 2022-07-16 00:25:43 +05:30 committed by Greg Kroah-Hartman
parent b9f1736e47
commit c474c77571
1 changed files with 56 additions and 38 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

94
drivers/tty/serial/qcom_geni_serial.c
View File

@ -940,52 +940,63 @@ static int qcom_geni_serial_startup(struct uart_port *uport)
return 0;
}
static unsigned long find_clk_rate_in_tol(struct clk *clk, unsigned int desired_clk,
unsigned int *clk_div, unsigned int percent_tol)
{
unsigned long freq;
unsigned long div, maxdiv;
u64 mult;
unsigned long offset, abs_tol, achieved;
abs_tol = div_u64((u64)desired_clk * percent_tol, 100);
maxdiv = CLK_DIV_MSK >> CLK_DIV_SHFT;
div = 1;
while (div <= maxdiv) {
mult = (u64)div * desired_clk;
if (mult != (unsigned long)mult)
break;
offset = div * abs_tol;
freq = clk_round_rate(clk, mult - offset);
/* Can only get lower if we're done */
if (freq < mult - offset)
break;
/*
* Re-calculate div in case rounding skipped rates but we
* ended up at a good one, then check for a match.
*/
div = DIV_ROUND_CLOSEST(freq, desired_clk);
achieved = DIV_ROUND_CLOSEST(freq, div);
if (achieved <= desired_clk + abs_tol &&
achieved >= desired_clk - abs_tol) {
*clk_div = div;
return freq;
}
div = DIV_ROUND_UP(freq, desired_clk);
}
return 0;
}
static unsigned long get_clk_div_rate(struct clk *clk, unsigned int baud,
unsigned int sampling_rate, unsigned int *clk_div)
{
unsigned long ser_clk;
unsigned long desired_clk;
unsigned long freq, prev;
unsigned long div, maxdiv;
int64_t mult;
desired_clk = baud * sampling_rate;
if (!desired_clk) {
pr_err("%s: Invalid frequency\n", __func__);
if (!desired_clk)
return 0;
}
maxdiv = CLK_DIV_MSK >> CLK_DIV_SHFT;
prev = 0;
for (div = 1; div <= maxdiv; div++) {
mult = div * desired_clk;
if (mult > ULONG_MAX)
break;
freq = clk_round_rate(clk, (unsigned long)mult);
if (!(freq % desired_clk)) {
ser_clk = freq;
break;
}
if (!prev)
ser_clk = freq;
else if (prev == freq)
break;
prev = freq;
}
if (!ser_clk) {
pr_err("%s: Can't find matching DFS entry for baud %d\n",
__func__, baud);
return ser_clk;
}
*clk_div = ser_clk / desired_clk;
if (!(*clk_div))
*clk_div = 1;
/*
* try to find a clock rate within 2% tolerance, then within 5%
*/
ser_clk = find_clk_rate_in_tol(clk, desired_clk, clk_div, 2);
if (!ser_clk)
ser_clk = find_clk_rate_in_tol(clk, desired_clk, clk_div, 5);
return ser_clk;
}
@ -1020,8 +1031,15 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
clk_rate = get_clk_div_rate(port->se.clk, baud,
sampling_rate, &clk_div);
if (!clk_rate)
if (!clk_rate) {
dev_err(port->se.dev,
"Couldn't find suitable clock rate for %lu\n",
baud * sampling_rate);
goto out_restart_rx;
}
dev_dbg(port->se.dev, "desired_rate-%lu, clk_rate-%lu, clk_div-%u\n",
baud * sampling_rate, clk_rate, clk_div);
uport->uartclk = clk_rate;
dev_pm_opp_set_rate(uport->dev, clk_rate);