mmc: mmci: create common mmci_dma_setup/release

This patch creates a common mmci_dma_setup/release which calls
dma_setup/release callbacks of mmci_host_ops and manages
common features like use_dma... If there is a fallbacks to
pio mode, dma functions must check use_dma.

error management:
-mmci_dmae_setup fail if Tx and Rx dma channels are not defined
-qcom_dma_setup fail if one of both dma channels is not defined,
 Qcom has no specific resource to release, just mmci dmae resource.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Ludovic Barre 2018-10-08 14:08:33 +02:00 committed by Ulf Hansson
parent f0061fed1f
commit c3647fdc6a
3 changed files with 75 additions and 18 deletions

View File

@ -45,6 +45,12 @@
#define DRIVER_NAME "mmci-pl18x"
#ifdef CONFIG_DMA_ENGINE
void mmci_variant_init(struct mmci_host *host);
#else
static inline void mmci_variant_init(struct mmci_host *host) {}
#endif
static unsigned int fmax = 515633;
static struct variant_data variant_arm = {
@ -57,6 +63,7 @@ static struct variant_data variant_arm = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.init = mmci_variant_init,
};
static struct variant_data variant_arm_extended_fifo = {
@ -68,6 +75,7 @@ static struct variant_data variant_arm_extended_fifo = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.init = mmci_variant_init,
};
static struct variant_data variant_arm_extended_fifo_hwfc = {
@ -80,6 +88,7 @@ static struct variant_data variant_arm_extended_fifo_hwfc = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.init = mmci_variant_init,
};
static struct variant_data variant_u300 = {
@ -98,6 +107,7 @@ static struct variant_data variant_u300 = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.init = mmci_variant_init,
};
static struct variant_data variant_nomadik = {
@ -117,6 +127,7 @@ static struct variant_data variant_nomadik = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.init = mmci_variant_init,
};
static struct variant_data variant_ux500 = {
@ -142,6 +153,7 @@ static struct variant_data variant_ux500 = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.init = mmci_variant_init,
};
static struct variant_data variant_ux500v2 = {
@ -169,6 +181,7 @@ static struct variant_data variant_ux500v2 = {
.mmcimask1 = true,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.init = mmci_variant_init,
};
static struct variant_data variant_stm32 = {
@ -186,6 +199,7 @@ static struct variant_data variant_stm32 = {
.f_max = 48000000,
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
.init = mmci_variant_init,
};
static struct variant_data variant_qcom = {
@ -356,6 +370,25 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
mmci_write_clkreg(host, clk);
}
void mmci_dma_release(struct mmci_host *host)
{
if (host->ops && host->ops->dma_release)
host->ops->dma_release(host);
host->use_dma = false;
}
void mmci_dma_setup(struct mmci_host *host)
{
if (!host->ops || !host->ops->dma_setup)
return;
if (host->ops->dma_setup(host))
return;
host->use_dma = true;
}
static void
mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
{
@ -414,7 +447,7 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
* no custom DMA interfaces are supported.
*/
#ifdef CONFIG_DMA_ENGINE
static void mmci_dma_setup(struct mmci_host *host)
int mmci_dmae_setup(struct mmci_host *host)
{
const char *rxname, *txname;
@ -464,15 +497,19 @@ static void mmci_dma_setup(struct mmci_host *host)
host->mmc->max_seg_size = max_seg_size;
}
if (host->ops && host->ops->dma_setup)
host->ops->dma_setup(host);
if (!host->dma_tx_channel && !host->dma_rx_channel) {
mmci_dmae_release(host);
return -EINVAL;
}
return 0;
}
/*
* This is used in or so inline it
* so it can be discarded.
*/
static inline void mmci_dma_release(struct mmci_host *host)
void mmci_dmae_release(struct mmci_host *host)
{
if (host->dma_rx_channel)
dma_release_channel(host->dma_rx_channel);
@ -496,7 +533,7 @@ static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
static void mmci_dma_data_error(struct mmci_host *host)
{
if (!dma_inprogress(host))
if (!host->use_dma || !dma_inprogress(host))
return;
dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n");
@ -514,7 +551,7 @@ static void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data)
u32 status;
int i;
if (!dma_inprogress(host))
if (!host->use_dma || !dma_inprogress(host))
return;
/* Wait up to 1ms for the DMA to complete */
@ -640,6 +677,9 @@ static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl)
int ret;
struct mmc_data *data = host->data;
if (!host->use_dma)
return -EINVAL;
ret = mmci_dma_prep_data(host, host->data);
if (ret)
return ret;
@ -674,6 +714,9 @@ static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data)
{
struct mmci_host_next *next = &host->next_data;
if (!host->use_dma)
return;
WARN_ON(data->host_cookie && data->host_cookie != next->cookie);
WARN_ON(!data->host_cookie && (next->dma_desc || next->dma_chan));
@ -689,7 +732,7 @@ static void mmci_pre_request(struct mmc_host *mmc, struct mmc_request *mrq)
struct mmc_data *data = mrq->data;
struct mmci_host_next *nd = &host->next_data;
if (!data)
if (!host->use_dma || !data)
return;
BUG_ON(data->host_cookie);
@ -707,7 +750,7 @@ static void mmci_post_request(struct mmc_host *mmc, struct mmc_request *mrq,
struct mmci_host *host = mmc_priv(mmc);
struct mmc_data *data = mrq->data;
if (!data || !data->host_cookie)
if (!host->use_dma || !data || !data->host_cookie)
return;
mmci_dma_unmap(host, data);
@ -735,18 +778,20 @@ static void mmci_post_request(struct mmc_host *mmc, struct mmc_request *mrq,
}
}
static struct mmci_host_ops mmci_variant_ops = {
.dma_setup = mmci_dmae_setup,
.dma_release = mmci_dmae_release,
};
void mmci_variant_init(struct mmci_host *host)
{
host->ops = &mmci_variant_ops;
}
#else
/* Blank functions if the DMA engine is not available */
static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data)
{
}
static inline void mmci_dma_setup(struct mmci_host *host)
{
}
static inline void mmci_dma_release(struct mmci_host *host)
{
}
static inline void mmci_dma_finalize(struct mmci_host *host,
struct mmc_data *data)

View File

@ -273,7 +273,8 @@ struct variant_data {
/* mmci variant callbacks */
struct mmci_host_ops {
void (*dma_setup)(struct mmci_host *host);
int (*dma_setup)(struct mmci_host *host);
void (*dma_release)(struct mmci_host *host);
};
struct mmci_host_next {
@ -323,6 +324,7 @@ struct mmci_host {
unsigned int size;
int (*get_rx_fifocnt)(struct mmci_host *h, u32 status, int remain);
u8 use_dma:1;
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
struct dma_chan *dma_current;
@ -336,3 +338,6 @@ struct mmci_host {
#endif
};
int mmci_dmae_setup(struct mmci_host *host);
void mmci_dmae_release(struct mmci_host *host);

View File

@ -119,19 +119,23 @@ static int of_get_dml_pipe_index(struct device_node *np, const char *name)
}
/* Initialize the dml hardware connected to SD Card controller */
static void qcom_dma_setup(struct mmci_host *host)
static int qcom_dma_setup(struct mmci_host *host)
{
u32 config;
void __iomem *base;
int consumer_id, producer_id;
struct device_node *np = host->mmc->parent->of_node;
if (mmci_dmae_setup(host))
return -EINVAL;
consumer_id = of_get_dml_pipe_index(np, "tx");
producer_id = of_get_dml_pipe_index(np, "rx");
if (producer_id < 0 || consumer_id < 0) {
host->variant->qcom_dml = false;
return;
mmci_dmae_release(host);
return -EINVAL;
}
base = host->base + DML_OFFSET;
@ -175,10 +179,13 @@ static void qcom_dma_setup(struct mmci_host *host)
/* Make sure dml initialization is finished */
mb();
return 0;
}
static struct mmci_host_ops qcom_variant_ops = {
.dma_setup = qcom_dma_setup,
.dma_release = mmci_dmae_release,
};
void qcom_variant_init(struct mmci_host *host)