Bluetooth: btintel_pcie: Add support for PCIe transport

Add initial code to support Intel bluetooth devices based on PCIe
transport. Allocate memory for TX & RX buffers, internal structures,
initialize interrupts for TX & RX and PCIe device.

Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Suggested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit is contained in:
Tedd Ho-Jeong An 2024-05-07 21:26:57 +05:30 committed by Luiz Augusto von Dentz
parent 67d4dbac3b
commit c2b636b3f7
5 changed files with 1495 additions and 1 deletions

View File

@ -478,5 +478,16 @@ config BT_NXPUART
Say Y here to compile support for NXP Bluetooth UART device into
the kernel, or say M here to compile as a module (btnxpuart).
config BT_INTEL_PCIE
tristate "Intel HCI PCIe driver"
depends on PCI
select BT_INTEL
select FW_LOADER
help
Intel Bluetooth transport driver for PCIe.
This driver is required if you want to use Intel Bluetooth device
with PCIe interface.
Say Y here to compiler support for Intel Bluetooth PCIe device into
the kernel or say M to compile it as module (btintel_pcie)
endmenu

View File

@ -17,6 +17,7 @@ obj-$(CONFIG_BT_HCIBTUSB) += btusb.o
obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o
obj-$(CONFIG_BT_INTEL) += btintel.o
obj-$(CONFIG_BT_INTEL_PCIE) += btintel_pcie.o btintel.o
obj-$(CONFIG_BT_ATH3K) += ath3k.o
obj-$(CONFIG_BT_MRVL) += btmrvl.o
obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o

View File

@ -209,7 +209,7 @@ struct btintel_data {
#define btintel_wait_on_flag_timeout(hdev, nr, m, to) \
wait_on_bit_timeout(btintel_get_flag(hdev), (nr), m, to)
#if IS_ENABLED(CONFIG_BT_INTEL)
#if IS_ENABLED(CONFIG_BT_INTEL) || IS_ENABLED(CONFIG_BT_INTEL_PCIE)
int btintel_check_bdaddr(struct hci_dev *hdev);
int btintel_enter_mfg(struct hci_dev *hdev);

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,425 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
*
* Bluetooth support for Intel PCIe devices
*
* Copyright (C) 2024 Intel Corporation
*/
/* Control and Status Register(BTINTEL_PCIE_CSR) */
#define BTINTEL_PCIE_CSR_BASE (0x000)
#define BTINTEL_PCIE_CSR_FUNC_CTRL_REG (BTINTEL_PCIE_CSR_BASE + 0x024)
#define BTINTEL_PCIE_CSR_HW_REV_REG (BTINTEL_PCIE_CSR_BASE + 0x028)
#define BTINTEL_PCIE_CSR_RF_ID_REG (BTINTEL_PCIE_CSR_BASE + 0x09C)
#define BTINTEL_PCIE_CSR_BOOT_STAGE_REG (BTINTEL_PCIE_CSR_BASE + 0x108)
#define BTINTEL_PCIE_CSR_CI_ADDR_LSB_REG (BTINTEL_PCIE_CSR_BASE + 0x118)
#define BTINTEL_PCIE_CSR_CI_ADDR_MSB_REG (BTINTEL_PCIE_CSR_BASE + 0x11C)
#define BTINTEL_PCIE_CSR_IMG_RESPONSE_REG (BTINTEL_PCIE_CSR_BASE + 0x12C)
#define BTINTEL_PCIE_CSR_HBUS_TARG_WRPTR (BTINTEL_PCIE_CSR_BASE + 0x460)
/* BTINTEL_PCIE_CSR Function Control Register */
#define BTINTEL_PCIE_CSR_FUNC_CTRL_FUNC_ENA (BIT(0))
#define BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_INIT (BIT(6))
#define BTINTEL_PCIE_CSR_FUNC_CTRL_FUNC_INIT (BIT(7))
#define BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_ACCESS_STS (BIT(20))
#define BTINTEL_PCIE_CSR_FUNC_CTRL_SW_RESET (BIT(31))
/* Value for BTINTEL_PCIE_CSR_BOOT_STAGE register */
#define BTINTEL_PCIE_CSR_BOOT_STAGE_ROM (BIT(0))
#define BTINTEL_PCIE_CSR_BOOT_STAGE_IML (BIT(1))
#define BTINTEL_PCIE_CSR_BOOT_STAGE_OPFW (BIT(2))
#define BTINTEL_PCIE_CSR_BOOT_STAGE_ROM_LOCKDOWN (BIT(10))
#define BTINTEL_PCIE_CSR_BOOT_STAGE_IML_LOCKDOWN (BIT(11))
#define BTINTEL_PCIE_CSR_BOOT_STAGE_MAC_ACCESS_ON (BIT(16))
#define BTINTEL_PCIE_CSR_BOOT_STAGE_ALIVE (BIT(23))
/* Registers for MSI-X */
#define BTINTEL_PCIE_CSR_MSIX_BASE (0x2000)
#define BTINTEL_PCIE_CSR_MSIX_FH_INT_CAUSES (BTINTEL_PCIE_CSR_MSIX_BASE + 0x0800)
#define BTINTEL_PCIE_CSR_MSIX_FH_INT_MASK (BTINTEL_PCIE_CSR_MSIX_BASE + 0x0804)
#define BTINTEL_PCIE_CSR_MSIX_HW_INT_CAUSES (BTINTEL_PCIE_CSR_MSIX_BASE + 0x0808)
#define BTINTEL_PCIE_CSR_MSIX_HW_INT_MASK (BTINTEL_PCIE_CSR_MSIX_BASE + 0x080C)
#define BTINTEL_PCIE_CSR_MSIX_AUTOMASK_ST (BTINTEL_PCIE_CSR_MSIX_BASE + 0x0810)
#define BTINTEL_PCIE_CSR_MSIX_AUTOMASK_EN (BTINTEL_PCIE_CSR_MSIX_BASE + 0x0814)
#define BTINTEL_PCIE_CSR_MSIX_IVAR_BASE (BTINTEL_PCIE_CSR_MSIX_BASE + 0x0880)
#define BTINTEL_PCIE_CSR_MSIX_IVAR(cause) (BTINTEL_PCIE_CSR_MSIX_IVAR_BASE + (cause))
/* Causes for the FH register interrupts */
enum msix_fh_int_causes {
BTINTEL_PCIE_MSIX_FH_INT_CAUSES_0 = BIT(0), /* cause 0 */
BTINTEL_PCIE_MSIX_FH_INT_CAUSES_1 = BIT(1), /* cause 1 */
};
/* Causes for the HW register interrupts */
enum msix_hw_int_causes {
BTINTEL_PCIE_MSIX_HW_INT_CAUSES_GP0 = BIT(0), /* cause 32 */
};
#define BTINTEL_PCIE_MSIX_NON_AUTO_CLEAR_CAUSE BIT(7)
/* Minimum and Maximum number of MSI-X Vector
* Intel Bluetooth PCIe support only 1 vector
*/
#define BTINTEL_PCIE_MSIX_VEC_MAX 1
#define BTINTEL_PCIE_MSIX_VEC_MIN 1
/* Default poll time for MAC access during init */
#define BTINTEL_DEFAULT_MAC_ACCESS_TIMEOUT_US 200000
/* Default interrupt timeout in msec */
#define BTINTEL_DEFAULT_INTR_TIMEOUT 3000
/* The number of descriptors in TX/RX queues */
#define BTINTEL_DESCS_COUNT 16
/* Number of Queue for TX and RX
* It indicates the index of the IA(Index Array)
*/
enum {
BTINTEL_PCIE_TXQ_NUM = 0,
BTINTEL_PCIE_RXQ_NUM = 1,
BTINTEL_PCIE_NUM_QUEUES = 2,
};
/* The size of DMA buffer for TX and RX in bytes */
#define BTINTEL_PCIE_BUFFER_SIZE 4096
/* DMA allocation alignment */
#define BTINTEL_PCIE_DMA_POOL_ALIGNMENT 256
/* Number of pending RX requests for downlink */
#define BTINTEL_PCIE_RX_MAX_QUEUE 6
/* Doorbell vector for FRBD */
#define BTINTEL_PCIE_RX_DB_VEC 513
/* RBD buffer size mapping */
#define BTINTEL_PCIE_RBD_SIZE_4K 0x04
/*
* Struct for Context Information (v2)
*
* All members are write-only for host and read-only for device.
*
* @version: Version of context information
* @size: Size of context information
* @config: Config with which host wants peripheral to execute
* Subset of capability register published by device
* @addr_tr_hia: Address of TR Head Index Array
* @addr_tr_tia: Address of TR Tail Index Array
* @addr_cr_hia: Address of CR Head Index Array
* @addr_cr_tia: Address of CR Tail Index Array
* @num_tr_ia: Number of entries in TR Index Arrays
* @num_cr_ia: Number of entries in CR Index Arrays
* @rbd_siz: RBD Size { 0x4=4K }
* @addr_tfdq: Address of TFD Queue(tx)
* @addr_urbdq0: Address of URBD Queue(tx)
* @num_tfdq: Number of TFD in TFD Queue(tx)
* @num_urbdq0: Number of URBD in URBD Queue(tx)
* @tfdq_db_vec: Queue number of TFD
* @urbdq0_db_vec: Queue number of URBD
* @addr_frbdq: Address of FRBD Queue(rx)
* @addr_urbdq1: Address of URBD Queue(rx)
* @num_frbdq: Number of FRBD in FRBD Queue(rx)
* @frbdq_db_vec: Queue number of FRBD
* @num_urbdq1: Number of URBD in URBD Queue(rx)
* @urbdq_db_vec: Queue number of URBDQ1
* @tr_msi_vec: Transfer Ring MSI-X Vector
* @cr_msi_vec: Completion Ring MSI-X Vector
* @dbgc_addr: DBGC first fragment address
* @dbgc_size: DBGC buffer size
* @early_enable: Enarly debug enable
* @dbg_output_mode: Debug output mode
* Bit[4] DBGC O/P { 0=SRAM, 1=DRAM(not relevant for NPK) }
* Bit[5] DBGC I/P { 0=BDBG, 1=DBGI }
* Bits[6:7] DBGI O/P(relevant if bit[5] = 1)
* 0=BT DBGC, 1=WiFi DBGC, 2=NPK }
* @dbg_preset: Debug preset
* @ext_addr: Address of context information extension
* @ext_size: Size of context information part
*
* Total 38 DWords
*/
struct ctx_info {
u16 version;
u16 size;
u32 config;
u32 reserved_dw02;
u32 reserved_dw03;
u64 addr_tr_hia;
u64 addr_tr_tia;
u64 addr_cr_hia;
u64 addr_cr_tia;
u16 num_tr_ia;
u16 num_cr_ia;
u32 rbd_size:4,
reserved_dw13:28;
u64 addr_tfdq;
u64 addr_urbdq0;
u16 num_tfdq;
u16 num_urbdq0;
u16 tfdq_db_vec;
u16 urbdq0_db_vec;
u64 addr_frbdq;
u64 addr_urbdq1;
u16 num_frbdq;
u16 frbdq_db_vec;
u16 num_urbdq1;
u16 urbdq_db_vec;
u16 tr_msi_vec;
u16 cr_msi_vec;
u32 reserved_dw27;
u64 dbgc_addr;
u32 dbgc_size;
u32 early_enable:1,
reserved_dw31:3,
dbg_output_mode:4,
dbg_preset:8,
reserved2_dw31:16;
u64 ext_addr;
u32 ext_size;
u32 test_param;
u32 reserved_dw36;
u32 reserved_dw37;
} __packed;
/* Transfer Descriptor for TX
* @type: Not in use. Set to 0x0
* @size: Size of data in the buffer
* @addr: DMA Address of buffer
*/
struct tfd {
u8 type;
u16 size;
u8 reserved;
u64 addr;
u32 reserved1;
} __packed;
/* URB Descriptor for TX
* @tfd_index: Index of TFD in TFDQ + 1
* @num_txq: Queue index of TFD Queue
* @cmpl_count: Completion count. Always 0x01
* @immediate_cmpl: Immediate completion flag: Always 0x01
*/
struct urbd0 {
u32 tfd_index:16,
num_txq:8,
cmpl_count:4,
reserved:3,
immediate_cmpl:1;
} __packed;
/* FRB Descriptor for RX
* @tag: RX buffer tag (index of RX buffer queue)
* @addr: Address of buffer
*/
struct frbd {
u32 tag:16,
reserved:16;
u32 reserved2;
u64 addr;
} __packed;
/* URB Descriptor for RX
* @frbd_tag: Tag from FRBD
* @status: Status
*/
struct urbd1 {
u32 frbd_tag:16,
status:1,
reserved:14,
fixed:1;
} __packed;
/* RFH header in RX packet
* @packet_len: Length of the data in the buffer
* @rxq: RX Queue number
* @cmd_id: Command ID. Not in Use
*/
struct rfh_hdr {
u64 packet_len:16,
rxq:6,
reserved:10,
cmd_id:16,
reserved1:16;
} __packed;
/* Internal data buffer
* @data: pointer to the data buffer
* @p_addr: physical address of data buffer
*/
struct data_buf {
u8 *data;
dma_addr_t data_p_addr;
};
/* Index Array */
struct ia {
dma_addr_t tr_hia_p_addr;
u16 *tr_hia;
dma_addr_t tr_tia_p_addr;
u16 *tr_tia;
dma_addr_t cr_hia_p_addr;
u16 *cr_hia;
dma_addr_t cr_tia_p_addr;
u16 *cr_tia;
};
/* Structure for TX Queue
* @count: Number of descriptors
* @tfds: Array of TFD
* @urbd0s: Array of URBD0
* @buf: Array of data_buf structure
*/
struct txq {
u16 count;
dma_addr_t tfds_p_addr;
struct tfd *tfds;
dma_addr_t urbd0s_p_addr;
struct urbd0 *urbd0s;
dma_addr_t buf_p_addr;
void *buf_v_addr;
struct data_buf *bufs;
};
/* Structure for RX Queue
* @count: Number of descriptors
* @frbds: Array of FRBD
* @urbd1s: Array of URBD1
* @buf: Array of data_buf structure
*/
struct rxq {
u16 count;
dma_addr_t frbds_p_addr;
struct frbd *frbds;
dma_addr_t urbd1s_p_addr;
struct urbd1 *urbd1s;
dma_addr_t buf_p_addr;
void *buf_v_addr;
struct data_buf *bufs;
};
/* struct btintel_pcie_data
* @pdev: pci device
* @hdev: hdev device
* @flags: driver state
* @irq_lock: spinlock for MSI-X
* @hci_rx_lock: spinlock for HCI RX flow
* @base_addr: pci base address (from BAR)
* @msix_entries: array of MSI-X entries
* @msix_enabled: true if MSI-X is enabled;
* @alloc_vecs: number of interrupt vectors allocated
* @def_irq: default irq for all causes
* @fh_init_mask: initial unmasked rxq causes
* @hw_init_mask: initial unmaksed hw causes
* @boot_stage_cache: cached value of boot stage register
* @img_resp_cache: cached value of image response register
* @cnvi: CNVi register value
* @cnvr: CNVr register value
* @gp0_received: condition for gp0 interrupt
* @gp0_wait_q: wait_q for gp0 interrupt
* @tx_wait_done: condition for tx interrupt
* @tx_wait_q: wait_q for tx interrupt
* @workqueue: workqueue for RX work
* @rx_skb_q: SKB queue for RX packet
* @rx_work: RX work struct to process the RX packet in @rx_skb_q
* @dma_pool: DMA pool for descriptors, index array and ci
* @dma_p_addr: DMA address for pool
* @dma_v_addr: address of pool
* @ci_p_addr: DMA address for CI struct
* @ci: CI struct
* @ia: Index Array struct
* @txq: TX Queue struct
* @rxq: RX Queue struct
*/
struct btintel_pcie_data {
struct pci_dev *pdev;
struct hci_dev *hdev;
unsigned long flags;
/* lock used in MSI-X interrupt */
spinlock_t irq_lock;
/* lock to serialize rx events */
spinlock_t hci_rx_lock;
void __iomem *base_addr;
struct msix_entry msix_entries[BTINTEL_PCIE_MSIX_VEC_MAX];
bool msix_enabled;
u32 alloc_vecs;
u32 def_irq;
u32 fh_init_mask;
u32 hw_init_mask;
u32 boot_stage_cache;
u32 img_resp_cache;
u32 cnvi;
u32 cnvr;
bool gp0_received;
wait_queue_head_t gp0_wait_q;
bool tx_wait_done;
wait_queue_head_t tx_wait_q;
struct workqueue_struct *workqueue;
struct sk_buff_head rx_skb_q;
struct work_struct rx_work;
struct dma_pool *dma_pool;
dma_addr_t dma_p_addr;
void *dma_v_addr;
dma_addr_t ci_p_addr;
struct ctx_info *ci;
struct ia ia;
struct txq txq;
struct rxq rxq;
};
static inline u32 btintel_pcie_rd_reg32(struct btintel_pcie_data *data,
u32 offset)
{
return ioread32(data->base_addr + offset);
}
static inline void btintel_pcie_wr_reg8(struct btintel_pcie_data *data,
u32 offset, u8 val)
{
iowrite8(val, data->base_addr + offset);
}
static inline void btintel_pcie_wr_reg32(struct btintel_pcie_data *data,
u32 offset, u32 val)
{
iowrite32(val, data->base_addr + offset);
}
static inline void btintel_pcie_set_reg_bits(struct btintel_pcie_data *data,
u32 offset, u32 bits)
{
u32 r;
r = ioread32(data->base_addr + offset);
r |= bits;
iowrite32(r, data->base_addr + offset);
}
static inline void btintel_pcie_clr_reg_bits(struct btintel_pcie_data *data,
u32 offset, u32 bits)
{
u32 r;
r = ioread32(data->base_addr + offset);
r &= ~bits;
iowrite32(r, data->base_addr + offset);
}