mmc: au1xmmc command types check from data flags

This patch has changed command types check from data flags.

MMC_STOP_TRANSMISSION is never passed to au1xmmc_send_command().
SEND_STOP() is used for MMC_STOP_TRANSMISSION.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
This commit is contained in:
Yoichi Yuasa 2007-05-13 18:23:15 +02:00 committed by Pierre Ossman
parent 39403865d2
commit c0f3b6c777

View File

@ -187,9 +187,8 @@ static void au1xmmc_tasklet_finish(unsigned long param)
}
static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
struct mmc_command *cmd)
struct mmc_command *cmd, unsigned int flags)
{
u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
switch (mmc_resp_type(cmd)) {
@ -213,24 +212,16 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
return MMC_ERR_INVALID;
}
switch(cmd->opcode) {
case MMC_READ_SINGLE_BLOCK:
case SD_APP_SEND_SCR:
mmccmd |= SD_CMD_CT_2;
break;
case MMC_READ_MULTIPLE_BLOCK:
mmccmd |= SD_CMD_CT_4;
break;
case MMC_WRITE_BLOCK:
mmccmd |= SD_CMD_CT_1;
break;
case MMC_WRITE_MULTIPLE_BLOCK:
mmccmd |= SD_CMD_CT_3;
break;
case MMC_STOP_TRANSMISSION:
mmccmd |= SD_CMD_CT_7;
break;
if (flags & MMC_DATA_READ) {
if (flags & MMC_DATA_MULTI)
mmccmd |= SD_CMD_CT_4;
else
mmccmd |= SD_CMD_CT_2;
} else if (flags & MMC_DATA_WRITE) {
if (flags & MMC_DATA_MULTI)
mmccmd |= SD_CMD_CT_3;
else
mmccmd |= SD_CMD_CT_1;
}
au_writel(cmd->arg, HOST_CMDARG(host));
@ -665,6 +656,7 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
{
struct au1xmmc_host *host = mmc_priv(mmc);
unsigned int flags = 0;
int ret = MMC_ERR_NONE;
WARN_ON(irqs_disabled());
@ -677,11 +669,12 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
if (mrq->data) {
FLUSH_FIFO(host);
flags = mrq->data->flags;
ret = au1xmmc_prepare_data(host, mrq->data);
}
if (ret == MMC_ERR_NONE)
ret = au1xmmc_send_command(host, 0, mrq->cmd);
ret = au1xmmc_send_command(host, 0, mrq->cmd, flags);
if (ret != MMC_ERR_NONE) {
mrq->cmd->error = ret;