Merge branch 'remotes/lorenzo/pci/aardvark'

- Decode PIO Posted/Non-posted Request correctly in error logging (Pali
  Rohár)

- Work around incorrect Vendor ID in Marvell Armada 3700 (Pali Rohár)

* remotes/lorenzo/pci/aardvark:
  PCI: aardvark: Implement workaround for the readback value of VEND_ID
  PCI: aardvark: Fix checking for PIO Non-posted Request
This commit is contained in:
Bjorn Helgaas 2021-07-06 10:56:29 -05:00
commit c04881e8c4

View File

@ -57,7 +57,7 @@
#define PIO_COMPLETION_STATUS_UR 1
#define PIO_COMPLETION_STATUS_CRS 2
#define PIO_COMPLETION_STATUS_CA 4
#define PIO_NON_POSTED_REQ BIT(0)
#define PIO_NON_POSTED_REQ BIT(10)
#define PIO_ADDR_LS (PIO_BASE_ADDR + 0x8)
#define PIO_ADDR_MS (PIO_BASE_ADDR + 0xc)
#define PIO_WR_DATA (PIO_BASE_ADDR + 0x10)
@ -125,6 +125,7 @@
#define LTSSM_MASK 0x3f
#define LTSSM_L0 0x10
#define RC_BAR_CONFIG 0x300
#define VENDOR_ID_REG (LMI_BASE_ADDR + 0x44)
/* PCIe core controller registers */
#define CTRL_CORE_BASE_ADDR 0x18000
@ -385,6 +386,16 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
reg |= (IS_RC_MSK << IS_RC_SHIFT);
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
/*
* Replace incorrect PCI vendor id value 0x1b4b by correct value 0x11ab.
* VENDOR_ID_REG contains vendor id in low 16 bits and subsystem vendor
* id in high 16 bits. Updating this register changes readback value of
* read-only vendor id bits in PCIE_CORE_DEV_ID_REG register. Workaround
* for erratum 4.1: "The value of device and vendor ID is incorrect".
*/
reg = (PCI_VENDOR_ID_MARVELL << 16) | PCI_VENDOR_ID_MARVELL;
advk_writel(pcie, reg, VENDOR_ID_REG);
/* Set Advanced Error Capabilities and Control PF0 register */
reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX |
PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN |