phy: qcom: qmp: move common bits definitions to common header

Move bit definitions for the common headers to the common phy-qcom-qmp.h
header.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-5-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Dmitry Baryshkov 2024-01-26 01:22:39 +02:00 committed by Vinod Koul
parent ef643d55fd
commit c01e03f97c
8 changed files with 26 additions and 137 deletions

View File

@ -41,16 +41,6 @@
#include "phy-qcom-qmp-dp-phy-v5.h"
#include "phy-qcom-qmp-dp-phy-v6.h"
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
/* QPHY_POWER_DOWN_CONTROL */
#define SW_PWRDN BIT(0)
/* QPHY_START_CONTROL bits */
#define SERDES_START BIT(0)
#define PCS_START BIT(1)
/* QPHY_PCS_STATUS bit */
#define PHYSTATUS BIT(6)
/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
/* DP PHY soft reset */
#define SW_DPPHY_RESET BIT(0)
@ -65,17 +55,6 @@
#define USB3_MODE BIT(0) /* enables USB3 mode */
#define DP_MODE BIT(1) /* enables DP mode */
/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
#define ARCVR_DTCT_EN BIT(0)
#define ALFPS_DTCT_EN BIT(1)
#define ARCVR_DTCT_EVENT_SEL BIT(4)
/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
#define IRQ_CLEAR BIT(0)
/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
/* QPHY_V3_DP_COM_TYPEC_CTRL register bits */
#define SW_PORTSELECT_VAL BIT(0)
#define SW_PORTSELECT_MUX BIT(1)

View File

@ -23,17 +23,9 @@
#include "phy-qcom-qmp.h"
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
/* QPHY_POWER_DOWN_CONTROL */
#define SW_PWRDN BIT(0)
#define REFCLK_DRV_DSBL BIT(1)
/* QPHY_START_CONTROL bits */
#define SERDES_START BIT(0)
#define PCS_START BIT(1)
#define PLL_READY_GATE_EN BIT(3)
/* QPHY_PCS_STATUS bit */
#define PHYSTATUS BIT(6)
/* QPHY_COM_PCS_READY_STATUS bit */
#define PCS_READY BIT(0)

View File

@ -34,18 +34,6 @@
#include "phy-qcom-qmp-pcs-pcie-v6_20.h"
#include "phy-qcom-qmp-pcie-qhp.h"
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
/* QPHY_POWER_DOWN_CONTROL */
#define SW_PWRDN BIT(0)
#define REFCLK_DRV_DSBL BIT(1)
/* QPHY_START_CONTROL bits */
#define SERDES_START BIT(0)
#define PCS_START BIT(1)
/* QPHY_PCS_STATUS bit */
#define PHYSTATUS BIT(6)
#define PHYSTATUS_4_20 BIT(7)
#define PHY_INIT_COMPLETE_TIMEOUT 10000
/* set of registers with offsets different per-PHY */

View File

@ -32,13 +32,6 @@
#include "phy-qcom-qmp-qserdes-txrx-ufs-v6.h"
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
/* QPHY_POWER_DOWN_CONTROL */
#define SW_PWRDN BIT(0)
/* QPHY_START_CONTROL bits */
#define SERDES_START BIT(0)
#define PCS_START BIT(1)
/* QPHY_PCS_READY_STATUS bit */
#define PCS_READY BIT(0)

View File

@ -27,16 +27,6 @@
#include "phy-qcom-qmp-dp-com-v3.h"
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
/* QPHY_POWER_DOWN_CONTROL */
#define SW_PWRDN BIT(0)
/* QPHY_START_CONTROL bits */
#define SERDES_START BIT(0)
#define PCS_START BIT(1)
/* QPHY_PCS_STATUS bit */
#define PHYSTATUS BIT(6)
/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
/* DP PHY soft reset */
#define SW_DPPHY_RESET BIT(0)
@ -51,17 +41,6 @@
#define USB3_MODE BIT(0) /* enables USB3 mode */
#define DP_MODE BIT(1) /* enables DP mode */
/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
#define ARCVR_DTCT_EN BIT(0)
#define ALFPS_DTCT_EN BIT(1)
#define ARCVR_DTCT_EVENT_SEL BIT(4)
/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
#define IRQ_CLEAR BIT(0)
/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
#define PHY_INIT_COMPLETE_TIMEOUT 10000
struct qmp_phy_init_tbl {

View File

@ -29,41 +29,6 @@
#include "phy-qcom-qmp-pcs-usb-v6.h"
#include "phy-qcom-qmp-pcs-usb-v7.h"
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
/* QPHY_POWER_DOWN_CONTROL */
#define SW_PWRDN BIT(0)
/* QPHY_START_CONTROL bits */
#define SERDES_START BIT(0)
#define PCS_START BIT(1)
/* QPHY_PCS_STATUS bit */
#define PHYSTATUS BIT(6)
/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
/* DP PHY soft reset */
#define SW_DPPHY_RESET BIT(0)
/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
#define SW_DPPHY_RESET_MUX BIT(1)
/* USB3 PHY soft reset */
#define SW_USB3PHY_RESET BIT(2)
/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
#define SW_USB3PHY_RESET_MUX BIT(3)
/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
#define USB3_MODE BIT(0) /* enables USB3 mode */
#define DP_MODE BIT(1) /* enables DP mode */
/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
#define ARCVR_DTCT_EN BIT(0)
#define ALFPS_DTCT_EN BIT(1)
#define ARCVR_DTCT_EVENT_SEL BIT(4)
/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
#define IRQ_CLEAR BIT(0)
/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
#define PHY_INIT_COMPLETE_TIMEOUT 10000
/* set of registers with offsets different per-PHY */

View File

@ -28,38 +28,6 @@
#include "phy-qcom-qmp.h"
#include "phy-qcom-qmp-pcs-misc-v3.h"
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
/* QPHY_POWER_DOWN_CONTROL */
#define SW_PWRDN BIT(0)
/* QPHY_START_CONTROL bits */
#define SERDES_START BIT(0)
#define PCS_START BIT(1)
/* QPHY_PCS_STATUS bit */
#define PHYSTATUS BIT(6)
/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
/* DP PHY soft reset */
#define SW_DPPHY_RESET BIT(0)
/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
#define SW_DPPHY_RESET_MUX BIT(1)
/* USB3 PHY soft reset */
#define SW_USB3PHY_RESET BIT(2)
/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
#define SW_USB3PHY_RESET_MUX BIT(3)
/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
#define USB3_MODE BIT(0) /* enables USB3 mode */
#define DP_MODE BIT(1) /* enables DP mode */
/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
#define ARCVR_DTCT_EN BIT(0)
#define ALFPS_DTCT_EN BIT(1)
#define ARCVR_DTCT_EVENT_SEL BIT(4)
/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
#define IRQ_CLEAR BIT(0)
#define PHY_INIT_COMPLETE_TIMEOUT 10000
/* set of registers with offsets different per-PHY */

View File

@ -50,4 +50,29 @@
#include "phy-qcom-qmp-pcs-v7.h"
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
/* QPHY_POWER_DOWN_CONTROL */
#define SW_PWRDN BIT(0)
#define REFCLK_DRV_DSBL BIT(1) /* PCIe */
/* QPHY_START_CONTROL bits */
#define SERDES_START BIT(0)
#define PCS_START BIT(1)
/* QPHY_PCS_STATUS bit */
#define PHYSTATUS BIT(6)
#define PHYSTATUS_4_20 BIT(7)
/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
#define ARCVR_DTCT_EN BIT(0)
#define ALFPS_DTCT_EN BIT(1)
#define ARCVR_DTCT_EVENT_SEL BIT(4)
/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
#define IRQ_CLEAR BIT(0)
/* QPHY_PCS_MISC_CLAMP_ENABLE register bits */
#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
#endif