Merge branch 'x86/tsc' into x86/core

arch/x86/kernel/cpu/addon_cpuid_features.c

@@ -120,9 +120,17 @@ void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
 	c->cpu_core_id = phys_pkg_id(c->initial_apicid, ht_mask_width)
 						 & core_select_mask;
 	c->phys_proc_id = phys_pkg_id(c->initial_apicid, core_plus_mask_width);
+	/*
+	 * Reinit the apicid, now that we have extended initial_apicid.
+	 */
+	c->apicid = phys_pkg_id(c->initial_apicid, 0);
 #else
 	c->cpu_core_id = phys_pkg_id(ht_mask_width) & core_select_mask;
 	c->phys_proc_id = phys_pkg_id(core_plus_mask_width);
+	/*
+	 * Reinit the apicid, now that we have extended initial_apicid.
+	 */
+	c->apicid = phys_pkg_id(0);
 #endif
 	c->x86_max_cores = (core_level_siblings / smp_num_siblings);
 

arch/x86/kernel/cpu/amd.c

@@ -283,9 +283,14 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 {
 	early_init_amd_mc(c);
 
-	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
+	/*
-	if (c->x86_power & (1<<8))
+	 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
+	 * with P/T states and does not stop in deep C-states
+	 */
+	if (c->x86_power & (1 << 8)) {
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+		set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
+	}
 
 #ifdef CONFIG_X86_64
 	set_cpu_cap(c, X86_FEATURE_SYSCALL32);

arch/x86/kernel/cpu/intel.c

@@ -41,6 +41,16 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 	if (c->x86 == 15 && c->x86_cache_alignment == 64)
 		c->x86_cache_alignment = 128;
 #endif
+
+	/*
+	 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
+	 * with P/T states and does not stop in deep C-states
+	 */
+	if (c->x86_power & (1 << 8)) {
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+		set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
+	}
+
 }
 
 #ifdef CONFIG_X86_32
@@ -242,6 +252,13 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 
 	intel_workarounds(c);
 
+	/*
+	 * Detect the extended topology information if available. This
+	 * will reinitialise the initial_apicid which will be used
+	 * in init_intel_cacheinfo()
+	 */
+	detect_extended_topology(c);
+
 	l2 = init_intel_cacheinfo(c);
 	if (c->cpuid_level > 9) {
 		unsigned eax = cpuid_eax(10);
@@ -312,7 +329,6 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 	if (cpu_has_bts)
 		ptrace_bts_init_intel(c);
 
-	detect_extended_topology(c);
 	if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) {
 		/*
 		 * let's use the legacy cpuid vector 0x1 and 0x4 for topology

arch/x86/kernel/process.c

@@ -287,7 +287,7 @@ static void c1e_idle(void)
 		rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
 		if (lo & K8_INTP_C1E_ACTIVE_MASK) {
 			c1e_detected = 1;
-			if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+			if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
 				mark_tsc_unstable("TSC halt in AMD C1E");
 			printk(KERN_INFO "System has AMD C1E enabled\n");
 			set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);

drivers/acpi/processor_idle.c

@@ -374,15 +374,15 @@ static int tsc_halts_in_c(int state)
 {
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
+	case X86_VENDOR_INTEL:
 		/*
 		 * AMD Fam10h TSC will tick in all
 		 * C/P/S0/S1 states when this bit is set.
 		 */
-		if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+		if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
 			return 0;
+
 		/*FALL THROUGH*/
-	case X86_VENDOR_INTEL:
-		/* Several cases known where TSC halts in C2 too */
 	default:
 		return state > ACPI_STATE_C1;
 	}