net: add Runtime PM to the sh_eth driver

Add Runtime PM support to the sh_eth driver.

The clock to the ethernet hardware block will be
enabled as long as the network device is up.

Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Magnus Damm 2009-10-09 00:20:04 +00:00 committed by David S. Miller
parent 748031f9fd
commit bcd5149ded
2 changed files with 34 additions and 2 deletions

View File

@ -30,7 +30,7 @@
#include <linux/phy.h>
#include <linux/cache.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
#include "sh_eth.h"
/* There is CPU dependent code */
@ -1012,6 +1012,8 @@ static int sh_eth_open(struct net_device *ndev)
int ret = 0;
struct sh_eth_private *mdp = netdev_priv(ndev);
pm_runtime_get_sync(&mdp->pdev->dev);
ret = request_irq(ndev->irq, &sh_eth_interrupt,
#if defined(CONFIG_CPU_SUBTYPE_SH7763) || defined(CONFIG_CPU_SUBTYPE_SH7764)
IRQF_SHARED,
@ -1048,6 +1050,7 @@ static int sh_eth_open(struct net_device *ndev)
out_free_irq:
free_irq(ndev->irq, ndev);
pm_runtime_put_sync(&mdp->pdev->dev);
return ret;
}
@ -1179,6 +1182,8 @@ static int sh_eth_close(struct net_device *ndev)
ringsize = sizeof(struct sh_eth_txdesc) * TX_RING_SIZE;
dma_free_coherent(NULL, ringsize, mdp->tx_ring, mdp->tx_desc_dma);
pm_runtime_put_sync(&mdp->pdev->dev);
return 0;
}
@ -1187,6 +1192,8 @@ static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev)
struct sh_eth_private *mdp = netdev_priv(ndev);
u32 ioaddr = ndev->base_addr;
pm_runtime_get_sync(&mdp->pdev->dev);
mdp->stats.tx_dropped += ctrl_inl(ioaddr + TROCR);
ctrl_outl(0, ioaddr + TROCR); /* (write clear) */
mdp->stats.collisions += ctrl_inl(ioaddr + CDCR);
@ -1202,6 +1209,8 @@ static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev)
mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CNDCR);
ctrl_outl(0, ioaddr + CNDCR); /* (write clear) */
#endif
pm_runtime_put_sync(&mdp->pdev->dev);
return &mdp->stats;
}
@ -1410,6 +1419,9 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
mdp = netdev_priv(ndev);
spin_lock_init(&mdp->lock);
mdp->pdev = pdev;
pm_runtime_enable(&pdev->dev);
pm_runtime_resume(&pdev->dev);
pd = (struct sh_eth_plat_data *)(pdev->dev.platform_data);
/* get PHY ID */
@ -1485,18 +1497,37 @@ static int sh_eth_drv_remove(struct platform_device *pdev)
sh_mdio_release(ndev);
unregister_netdev(ndev);
flush_scheduled_work();
pm_runtime_disable(&pdev->dev);
free_netdev(ndev);
platform_set_drvdata(pdev, NULL);
return 0;
}
static int sh_eth_runtime_nop(struct device *dev)
{
/*
* Runtime PM callback shared between ->runtime_suspend()
* and ->runtime_resume(). Simply returns success.
*
* This driver re-initializes all registers after
* pm_runtime_get_sync() anyway so there is no need
* to save and restore registers here.
*/
return 0;
}
static struct dev_pm_ops sh_eth_dev_pm_ops = {
.runtime_suspend = sh_eth_runtime_nop,
.runtime_resume = sh_eth_runtime_nop,
};
static struct platform_driver sh_eth_driver = {
.probe = sh_eth_drv_probe,
.remove = sh_eth_drv_remove,
.driver = {
.name = CARDNAME,
.pm = &sh_eth_dev_pm_ops,
},
};

View File

@ -703,6 +703,7 @@ struct sh_eth_cpu_data {
};
struct sh_eth_private {
struct platform_device *pdev;
struct sh_eth_cpu_data *cd;
dma_addr_t rx_desc_dma;
dma_addr_t tx_desc_dma;