mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 02:04:19 +08:00
ASoC: rt5651: Do not modify the LDO voltage control bits from set_bias_level()
The PWR_ANLG1 reg not only contains various power on/off bits, it also contains 2 bits which select if the LDO generates 1.0, 1.1 or 1.2V. Note there is a separate on/off bit for the LDO. rt5651_set_bias_level(BIAS_OFF) used to unconditionally clear the entire register, when jack-detection support was introduced a special case for jack-detect was added which hard-codes a register value to keep the LDO voltage at 1.2 volt. This commit removes the jack-detect special case, instead simply always leaving the LDO voltage control bits as is on BIAS_OFF. Tested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
984c803f9a
commit
bba4e685da
@ -1555,11 +1555,12 @@ static int rt5651_set_bias_level(struct snd_soc_component *component,
|
||||
snd_soc_component_write(component, RT5651_PWR_DIG2, 0x0000);
|
||||
snd_soc_component_write(component, RT5651_PWR_VOL, 0x0000);
|
||||
snd_soc_component_write(component, RT5651_PWR_MIXER, 0x0000);
|
||||
/* Do not touch the LDO voltage select bits on bias-off */
|
||||
snd_soc_component_update_bits(component, RT5651_PWR_ANLG1,
|
||||
~RT5651_PWR_LDO_DVO_MASK, 0);
|
||||
if (rt5651->jd_src) {
|
||||
snd_soc_component_write(component, RT5651_PWR_ANLG2, 0x0204);
|
||||
snd_soc_component_write(component, RT5651_PWR_ANLG1, 0x0002);
|
||||
} else {
|
||||
snd_soc_component_write(component, RT5651_PWR_ANLG1, 0x0000);
|
||||
snd_soc_component_write(component, RT5651_PWR_ANLG2, 0x0000);
|
||||
}
|
||||
break;
|
||||
|
Loading…
Reference in New Issue
Block a user