korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 00:34:20 +08:00
Code Issues Packages Projects Releases Wiki Activity

hwmon: (k8temp) Warn about fam F rev F errata

Browse Source 
Add warning about wrong CPU temperature readouts on all fam F rev F.

The allowed combinations of processors ensure that all processors
in a multisocket system have similar characteristics, e.g.

(1) provide temperature sensor interface (>=RevC && <RevF)
(2) are affected by erratum #141 (>=RevF)

Thus it is sufficient to check the revision of the boot CPU.

For "mixed silicon support" refer to
"Revision Guide for AMD Athlon 64 and AMD Opteron Processors" (RevA-E) and
"Revision Guide for AMD NPT Family 0Fh Processors" (RefF-G).

Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
Andreas Herrmann 2009-01-15 22:27:46 +01:00 committed by Jean Delvare
parent 5393f78027
commit bb9a35f293
1 changed files with 22 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
drivers/hwmon/k8temp.c
View File

@ -31,6 +31,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <asm/processor.h>
#define TEMP_FROM_REG(val) (((((val) >> 16) & 0xff) - 49) * 1000)
#define REG_TEMP 0xe4
@ -141,20 +142,34 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
int err;
u8 scfg;
u32 temp;
u8 model, stepping;
struct k8temp_data *data;
u32 cpuid = cpuid_eax(1);
/* this feature should be available since SH-C0 core */
if ((cpuid == 0xf40) || (cpuid == 0xf50) || (cpuid == 0xf51)) {
err = -ENODEV;
goto exit;
}
if (!(data = kzalloc(sizeof(struct k8temp_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
model = boot_cpu_data.x86_model;
stepping = boot_cpu_data.x86_mask;
switch (boot_cpu_data.x86) {
case 0xf:
/* feature available since SH-C0, exclude older revisions */
if (((model == 4) && (stepping == 0)) ||
((model == 5) && (stepping <= 1))) {
err = -ENODEV;
goto exit_free;
}
if (model >= 0x40) {
dev_warn(&pdev->dev, "Temperature readouts might be "
"wrong - check erratum #141\n");
}
break;
}
pci_read_config_byte(pdev, REG_TEMP, &scfg);
scfg &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */
pci_write_config_byte(pdev, REG_TEMP, scfg);