mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-13 14:24:11 +08:00
scsi: mpi3mr: Validate SAS port assignments
A sanity check on phy_mask was added in commit3668651def
("scsi: mpi3mr: Sanitise num_phys"). This causes warning messages when more than 64 phys are detected and devices connected to phys greater than 64 are dropped. The phy_mask bitmap is only needed for controller phys and not required for expander phys. Controller phys can go up to a maximum of 64 and therefore u64 is good enough to contain phy_mask bitmap. To suppress those warnings and allow devices to be discovered as before the offending commit, restrict the phy_mask setting and lowest phy setting only to the controller phys. Fixes:3668651def
("scsi: mpi3mr: Sanitise num_phys") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410051943.Mp9o5DlF-lkp@intel.com/ Reported-by: Alexander Motin <mav@ixsystems.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241008074353.200379-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
parent
19a198b677
commit
b9e63d6c7c
@ -542,8 +542,8 @@ struct mpi3mr_hba_port {
|
||||
* @port_list: List of ports belonging to a SAS node
|
||||
* @num_phys: Number of phys associated with port
|
||||
* @marked_responding: used while refresing the sas ports
|
||||
* @lowest_phy: lowest phy ID of current sas port
|
||||
* @phy_mask: phy_mask of current sas port
|
||||
* @lowest_phy: lowest phy ID of current sas port, valid for controller port
|
||||
* @phy_mask: phy_mask of current sas port, valid for controller port
|
||||
* @hba_port: HBA port entry
|
||||
* @remote_identify: Attached device identification
|
||||
* @rphy: SAS transport layer rphy object
|
||||
|
@ -590,12 +590,13 @@ static enum sas_linkrate mpi3mr_convert_phy_link_rate(u8 link_rate)
|
||||
* @mrioc: Adapter instance reference
|
||||
* @mr_sas_port: Internal Port object
|
||||
* @mr_sas_phy: Internal Phy object
|
||||
* @host_node: Flag to indicate this is a host_node
|
||||
*
|
||||
* Return: None.
|
||||
*/
|
||||
static void mpi3mr_delete_sas_phy(struct mpi3mr_ioc *mrioc,
|
||||
struct mpi3mr_sas_port *mr_sas_port,
|
||||
struct mpi3mr_sas_phy *mr_sas_phy)
|
||||
struct mpi3mr_sas_phy *mr_sas_phy, u8 host_node)
|
||||
{
|
||||
u64 sas_address = mr_sas_port->remote_identify.sas_address;
|
||||
|
||||
@ -605,9 +606,13 @@ static void mpi3mr_delete_sas_phy(struct mpi3mr_ioc *mrioc,
|
||||
|
||||
list_del(&mr_sas_phy->port_siblings);
|
||||
mr_sas_port->num_phys--;
|
||||
mr_sas_port->phy_mask &= ~(1 << mr_sas_phy->phy_id);
|
||||
if (mr_sas_port->lowest_phy == mr_sas_phy->phy_id)
|
||||
mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1;
|
||||
|
||||
if (host_node) {
|
||||
mr_sas_port->phy_mask &= ~(1 << mr_sas_phy->phy_id);
|
||||
|
||||
if (mr_sas_port->lowest_phy == mr_sas_phy->phy_id)
|
||||
mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1;
|
||||
}
|
||||
sas_port_delete_phy(mr_sas_port->port, mr_sas_phy->phy);
|
||||
mr_sas_phy->phy_belongs_to_port = 0;
|
||||
}
|
||||
@ -617,12 +622,13 @@ static void mpi3mr_delete_sas_phy(struct mpi3mr_ioc *mrioc,
|
||||
* @mrioc: Adapter instance reference
|
||||
* @mr_sas_port: Internal Port object
|
||||
* @mr_sas_phy: Internal Phy object
|
||||
* @host_node: Flag to indicate this is a host_node
|
||||
*
|
||||
* Return: None.
|
||||
*/
|
||||
static void mpi3mr_add_sas_phy(struct mpi3mr_ioc *mrioc,
|
||||
struct mpi3mr_sas_port *mr_sas_port,
|
||||
struct mpi3mr_sas_phy *mr_sas_phy)
|
||||
struct mpi3mr_sas_phy *mr_sas_phy, u8 host_node)
|
||||
{
|
||||
u64 sas_address = mr_sas_port->remote_identify.sas_address;
|
||||
|
||||
@ -632,9 +638,12 @@ static void mpi3mr_add_sas_phy(struct mpi3mr_ioc *mrioc,
|
||||
|
||||
list_add_tail(&mr_sas_phy->port_siblings, &mr_sas_port->phy_list);
|
||||
mr_sas_port->num_phys++;
|
||||
mr_sas_port->phy_mask |= (1 << mr_sas_phy->phy_id);
|
||||
if (mr_sas_phy->phy_id < mr_sas_port->lowest_phy)
|
||||
mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1;
|
||||
if (host_node) {
|
||||
mr_sas_port->phy_mask |= (1 << mr_sas_phy->phy_id);
|
||||
|
||||
if (mr_sas_phy->phy_id < mr_sas_port->lowest_phy)
|
||||
mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1;
|
||||
}
|
||||
sas_port_add_phy(mr_sas_port->port, mr_sas_phy->phy);
|
||||
mr_sas_phy->phy_belongs_to_port = 1;
|
||||
}
|
||||
@ -675,7 +684,7 @@ static void mpi3mr_add_phy_to_an_existing_port(struct mpi3mr_ioc *mrioc,
|
||||
if (srch_phy == mr_sas_phy)
|
||||
return;
|
||||
}
|
||||
mpi3mr_add_sas_phy(mrioc, mr_sas_port, mr_sas_phy);
|
||||
mpi3mr_add_sas_phy(mrioc, mr_sas_port, mr_sas_phy, mr_sas_node->host_node);
|
||||
return;
|
||||
}
|
||||
}
|
||||
@ -736,7 +745,7 @@ static void mpi3mr_del_phy_from_an_existing_port(struct mpi3mr_ioc *mrioc,
|
||||
mpi3mr_delete_sas_port(mrioc, mr_sas_port);
|
||||
else
|
||||
mpi3mr_delete_sas_phy(mrioc, mr_sas_port,
|
||||
mr_sas_phy);
|
||||
mr_sas_phy, mr_sas_node->host_node);
|
||||
return;
|
||||
}
|
||||
}
|
||||
@ -1028,7 +1037,7 @@ mpi3mr_alloc_hba_port(struct mpi3mr_ioc *mrioc, u16 port_id)
|
||||
/**
|
||||
* mpi3mr_get_hba_port_by_id - find hba port by id
|
||||
* @mrioc: Adapter instance reference
|
||||
* @port_id - Port ID to search
|
||||
* @port_id: Port ID to search
|
||||
*
|
||||
* Return: mpi3mr_hba_port reference for the matched port
|
||||
*/
|
||||
@ -1367,7 +1376,8 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc,
|
||||
mpi3mr_sas_port_sanity_check(mrioc, mr_sas_node,
|
||||
mr_sas_port->remote_identify.sas_address, hba_port);
|
||||
|
||||
if (mr_sas_node->num_phys >= sizeof(mr_sas_port->phy_mask) * 8)
|
||||
if (mr_sas_node->host_node && mr_sas_node->num_phys >=
|
||||
sizeof(mr_sas_port->phy_mask) * 8)
|
||||
ioc_info(mrioc, "max port count %u could be too high\n",
|
||||
mr_sas_node->num_phys);
|
||||
|
||||
@ -1377,7 +1387,7 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc,
|
||||
(mr_sas_node->phy[i].hba_port != hba_port))
|
||||
continue;
|
||||
|
||||
if (i >= sizeof(mr_sas_port->phy_mask) * 8) {
|
||||
if (mr_sas_node->host_node && (i >= sizeof(mr_sas_port->phy_mask) * 8)) {
|
||||
ioc_warn(mrioc, "skipping port %u, max allowed value is %zu\n",
|
||||
i, sizeof(mr_sas_port->phy_mask) * 8);
|
||||
goto out_fail;
|
||||
@ -1385,7 +1395,8 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc,
|
||||
list_add_tail(&mr_sas_node->phy[i].port_siblings,
|
||||
&mr_sas_port->phy_list);
|
||||
mr_sas_port->num_phys++;
|
||||
mr_sas_port->phy_mask |= (1 << i);
|
||||
if (mr_sas_node->host_node)
|
||||
mr_sas_port->phy_mask |= (1 << i);
|
||||
}
|
||||
|
||||
if (!mr_sas_port->num_phys) {
|
||||
@ -1394,7 +1405,8 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc,
|
||||
goto out_fail;
|
||||
}
|
||||
|
||||
mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1;
|
||||
if (mr_sas_node->host_node)
|
||||
mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1;
|
||||
|
||||
if (mr_sas_port->remote_identify.device_type == SAS_END_DEVICE) {
|
||||
tgtdev = mpi3mr_get_tgtdev_by_addr(mrioc,
|
||||
|
Loading…
Reference in New Issue
Block a user