Merge branch 'picoxcell/soc' into next/soc

Documentation/devicetree/bindings/arm/picoxcell.txt

@@ -0,0 +1,24 @@
+Picochip picoXcell device tree bindings.
+========================================
+
+Required root node properties:
+    - compatible:
+	- "picochip,pc7302-pc3x3" : PC7302 development board with PC3X3 device.
+	- "picochip,pc7302-pc3x2" : PC7302 development board with PC3X2 device.
+	- "picochip,pc3x3" : picoXcell PC3X3 device based board.
+	- "picochip,pc3x2" : picoXcell PC3X2 device based board.
+
+Timers required properties:
+    - compatible = "picochip,pc3x2-timer"
+    - interrupts : The single IRQ line for the timer.
+    - clock-freq : The frequency in HZ of the timer.
+    - reg : The register bank for the timer.
+
+Note: two timers are required - one for the scheduler clock and one for the
+event tick/NOHZ.
+
+VIC required properties:
+    - compatible = "arm,pl192-vic".
+    - interrupt-controller.
+    - reg : The register bank for the device.
+    - #interrupt-cells : Must be 1.

arch/arm/Kconfig

@@ -643,6 +643,24 @@ config ARCH_TEGRA
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).
 
+config ARCH_PICOXCELL
+	bool "Picochip picoXcell"
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_PATCH_PHYS_VIRT
+	select ARM_VIC
+	select CPU_V6K
+	select DW_APB_TIMER
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_SCHED_CLOCK
+	select HAVE_TCM
+	select NO_IOPORT
+	select USE_OF
+	help
+	  This enables support for systems based on the Picochip picoXcell
+	  family of Femtocell devices.  The picoxcell support requires device tree
+	  for all boards.
+
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T

arch/arm/Makefile

@@ -169,6 +169,7 @@ machine-$(CONFIG_ARCH_OMAP2)		:= omap2
 machine-$(CONFIG_ARCH_OMAP3)		:= omap2
 machine-$(CONFIG_ARCH_OMAP4)		:= omap2
 machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
+machine-$(CONFIG_ARCH_PICOXCELL)	:= picoxcell
 machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
 machine-$(CONFIG_ARCH_PRIMA2)		:= prima2
 machine-$(CONFIG_ARCH_PXA)		:= pxa

arch/arm/boot/dts/picoxcell-pc3x2.dtsi

@@ -0,0 +1,249 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+	model = "Picochip picoXcell PC3X2";
+	compatible = "picochip,pc3x2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,1176jz-s";
+			clock-frequency = <400000000>;
+			reg = <0>;
+			d-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <32>;
+			i-cache-size = <32768>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pclk: clock@0 {
+			compatible = "fixed-clock";
+			clock-outputs = "bus", "pclk";
+			clock-frequency = <200000000>;
+			ref-clock = <&ref_clk>, "ref";
+		};
+	};
+
+	paxi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80000000 0x400000>;
+
+		emac: gem@30000 {
+			compatible = "cadence,gem";
+			reg = <0x30000 0x10000>;
+			interrupts = <31>;
+		};
+
+		dmac1: dmac@40000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x40000 0x10000>;
+			interrupts = <25>;
+		};
+
+		dmac2: dmac@50000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x50000 0x10000>;
+			interrupts = <26>;
+		};
+
+		vic0: interrupt-controller@60000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x60000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@64000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x64000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		fuse: picoxcell-fuse@80000 {
+			compatible = "picoxcell,fuse-pc3x2";
+			reg = <0x80000 0x10000>;
+		};
+
+		ssi: picoxcell-spi@90000 {
+			compatible = "picoxcell,spi";
+			reg = <0x90000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <10>;
+		};
+
+		ipsec: spacc@100000 {
+			compatible = "picochip,spacc-ipsec";
+			reg = <0x100000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <24>;
+			ref-clock = <&pclk>, "ref";
+		};
+
+		srtp: spacc@140000 {
+			compatible = "picochip,spacc-srtp";
+			reg = <0x140000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>;
+		};
+
+		l2_engine: spacc@180000 {
+			compatible = "picochip,spacc-l2";
+			reg = <0x180000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <22>;
+			ref-clock = <&pclk>, "ref";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x200000 0x80000>;
+
+			rtc0: rtc@00000 {
+				compatible = "picochip,pc3x2-rtc";
+				clock-freq = <200000000>;
+				reg = <0x00000 0xf>;
+				interrupt-parent = <&vic1>;
+				interrupts = <8>;
+			};
+
+			timer0: timer@10000 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <4>;
+				clock-freq = <200000000>;
+				reg = <0x10000 0x14>;
+			};
+
+			timer1: timer@10014 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <5>;
+				clock-freq = <200000000>;
+				reg = <0x10014 0x14>;
+			};
+
+			timer2: timer@10028 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <6>;
+				clock-freq = <200000000>;
+				reg = <0x10028 0x14>;
+			};
+
+			timer3: timer@1003c {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <7>;
+				clock-freq = <200000000>;
+				reg = <0x1003c 0x14>;
+			};
+
+			gpio: gpio@20000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x20000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg-io-width = <4>;
+
+				banka: gpio-controller@0 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <8>;
+
+					regoffset-dat = <0x50>;
+					regoffset-set = <0x00>;
+					regoffset-dirout = <0x04>;
+				};
+
+				bankb: gpio-controller@1 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <8>;
+
+					regoffset-dat = <0x54>;
+					regoffset-set = <0x0c>;
+					regoffset-dirout = <0x10>;
+				};
+			};
+
+			uart0: uart@30000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x30000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <10>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			uart1: uart@40000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x40000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <9>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			wdog: watchdog@50000 {
+				compatible = "snps,dw-apb-wdg";
+				reg = <0x50000 0x10000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <11>;
+				bus-clock = <&pclk>, "bus";
+			};
+		};
+	};
+
+	rwid-axi {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		ebi@50000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40000000 0x08000000
+				  1 0 0x48000000 0x08000000
+				  2 0 0x50000000 0x08000000
+				  3 0 0x58000000 0x08000000>;
+		};
+
+		axi2pico@c0000000 {
+			compatible = "picochip,axi2pico-pc3x2";
+			reg = <0xc0000000 0x10000>;
+			interrupts = <13 14 15 16 17 18 19 20 21>;
+		};
+	};
+};

arch/arm/boot/dts/picoxcell-pc3x3.dtsi

@@ -0,0 +1,365 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+	model = "Picochip picoXcell PC3X3";
+	compatible = "picochip,pc3x3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,1176jz-s";
+			cpu-clock = <&arm_clk>, "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <32>;
+			i-cache-size = <32768>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clkgate: clkgate@800a0048 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x800a0048 4>;
+			compatible = "picochip,pc3x3-clk-gate";
+
+			tzprot_clk: clock@0 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <0>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			spi_clk: clock@1 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <1>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			dmac0_clk: clock@2 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <2>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			dmac1_clk: clock@3 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <3>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			ebi_clk: clock@4 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <4>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			ipsec_clk: clock@5 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <5>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			l2_clk: clock@6 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <6>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			trng_clk: clock@7 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <7>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			fuse_clk: clock@8 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <8>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			otp_clk: clock@9 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <9>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+		};
+
+		arm_clk: clock@11 {
+			compatible = "picochip,pc3x3-pll";
+			reg = <0x800a0050 0x8>;
+			picochip,min-freq = <140000000>;
+			picochip,max-freq = <700000000>;
+			ref-clock = <&ref_clk>, "ref";
+			clock-outputs = "cpu";
+		};
+
+		pclk: clock@12 {
+			compatible = "fixed-clock";
+			clock-outputs = "bus", "pclk";
+			clock-frequency = <200000000>;
+			ref-clock = <&ref_clk>, "ref";
+		};
+	};
+
+	paxi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80000000 0x400000>;
+
+		emac: gem@30000 {
+			compatible = "cadence,gem";
+			reg = <0x30000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <31>;
+		};
+
+		dmac1: dmac@40000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x40000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <25>;
+		};
+
+		dmac2: dmac@50000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x50000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+		};
+
+		vic0: interrupt-controller@60000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x60000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@64000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x64000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		fuse: picoxcell-fuse@80000 {
+			compatible = "picoxcell,fuse-pc3x3";
+			reg = <0x80000 0x10000>;
+		};
+
+		ssi: picoxcell-spi@90000 {
+			compatible = "picoxcell,spi";
+			reg = <0x90000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <10>;
+		};
+
+		ipsec: spacc@100000 {
+			compatible = "picochip,spacc-ipsec";
+			reg = <0x100000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <24>;
+			ref-clock = <&ipsec_clk>, "ref";
+		};
+
+		srtp: spacc@140000 {
+			compatible = "picochip,spacc-srtp";
+			reg = <0x140000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>;
+		};
+
+		l2_engine: spacc@180000 {
+			compatible = "picochip,spacc-l2";
+			reg = <0x180000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <22>;
+			ref-clock = <&l2_clk>, "ref";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x200000 0x80000>;
+
+			rtc0: rtc@00000 {
+				compatible = "picochip,pc3x2-rtc";
+				clock-freq = <200000000>;
+				reg = <0x00000 0xf>;
+				interrupt-parent = <&vic0>;
+				interrupts = <8>;
+			};
+
+			timer0: timer@10000 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <4>;
+				clock-freq = <200000000>;
+				reg = <0x10000 0x14>;
+			};
+
+			timer1: timer@10014 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <5>;
+				clock-freq = <200000000>;
+				reg = <0x10014 0x14>;
+			};
+
+			gpio: gpio@20000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x20000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg-io-width = <4>;
+
+				banka: gpio-controller@0 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <8>;
+
+					regoffset-dat = <0x50>;
+					regoffset-set = <0x00>;
+					regoffset-dirout = <0x04>;
+				};
+
+				bankb: gpio-controller@1 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <16>;
+
+					regoffset-dat = <0x54>;
+					regoffset-set = <0x0c>;
+					regoffset-dirout = <0x10>;
+				};
+
+				bankd: gpio-controller@2 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <30>;
+
+					regoffset-dat = <0x5c>;
+					regoffset-set = <0x24>;
+					regoffset-dirout = <0x28>;
+				};
+			};
+
+			uart0: uart@30000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x30000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <10>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			uart1: uart@40000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x40000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <9>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			wdog: watchdog@50000 {
+				compatible = "snps,dw-apb-wdg";
+				reg = <0x50000 0x10000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <11>;
+				bus-clock = <&pclk>, "bus";
+			};
+
+			timer2: timer@60000 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <6>;
+				clock-freq = <200000000>;
+				reg = <0x60000 0x14>;
+			};
+
+			timer3: timer@60014 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <7>;
+				clock-freq = <200000000>;
+				reg = <0x60014 0x14>;
+			};
+		};
+	};
+
+	rwid-axi {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		ebi@50000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40000000 0x08000000
+				  1 0 0x48000000 0x08000000
+				  2 0 0x50000000 0x08000000
+				  3 0 0x58000000 0x08000000>;
+		};
+
+		axi2pico@c0000000 {
+			compatible = "picochip,axi2pico-pc3x3";
+			reg = <0xc0000000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <13 14 15 16 17 18 19 20 21>;
+		};
+
+		otp@ffff8000 {
+			compatible = "picochip,otp-pc3x3";
+			reg = <0xffff8000 0x8000>;
+		};
+	};
+};

arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts

@@ -0,0 +1,86 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x2.dtsi"
+/ {
+	model = "Picochip PC7302 (PC3X2)";
+	compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	chosen {
+		linux,stdout-path = &uart0;
+	};
+
+	clocks {
+		ref_clk: clock@1 {
+			compatible = "fixed-clock";
+			clock-outputs = "ref";
+			clock-frequency = <20000000>;
+		};
+	};
+
+	rwid-axi {
+		ebi@50000000 {
+			nand: gpio-nand@2,0 {
+				compatible = "gpio-control-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <2 0x0000 0x1000>;
+				bus-clock = <&pclk>, "bus";
+				gpio-control-nand,io-sync-reg =
+					<0x00000000 0x80220000>;
+
+				gpios = <&banka 1 0	/* rdy */
+					 &banka 2 0 	/* nce */
+					 &banka 3 0 	/* ale */
+					 &banka 4 0 	/* cle */
+					 0		/* nwp */>;
+
+				boot@100000 {
+					label = "Boot";
+					reg = <0x100000 0x80000>;
+				};
+
+				redundant-boot@200000 {
+					label = "Redundant Boot";
+					reg = <0x200000 0x80000>;
+				};
+
+				boot-env@300000 {
+					label = "Boot Evironment";
+					reg = <0x300000 0x20000>;
+				};
+
+				redundant-boot-env@320000 {
+					label = "Redundant Boot Environment";
+					reg = <0x300000 0x20000>;
+				};
+
+				kernel@380000 {
+					label = "Kernel";
+					reg = <0x380000 0x800000>;
+				};
+
+				fs@b80000 {
+					label = "File System";
+					reg = <0xb80000 0xf480000>;
+				};
+			};
+		};
+	};
+};

arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts

@@ -0,0 +1,92 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x3.dtsi"
+/ {
+	model = "Picochip PC7302 (PC3X3)";
+	compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	chosen {
+		linux,stdout-path = &uart0;
+	};
+
+	clocks {
+		ref_clk: clock@10 {
+			compatible = "fixed-clock";
+			clock-outputs = "ref";
+			clock-frequency = <20000000>;
+		};
+
+		clkgate: clkgate@800a0048 {
+			clock@4 {
+				picochip,clk-no-disable;
+			};
+		};
+	};
+
+	rwid-axi {
+		ebi@50000000 {
+			nand: gpio-nand@2,0 {
+				compatible = "gpio-control-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <2 0x0000 0x1000>;
+				bus-clock = <&ebi_clk>, "bus";
+				gpio-control-nand,io-sync-reg =
+					<0x00000000 0x80220000>;
+
+				gpios = <&banka 1 0	/* rdy */
+					 &banka 2 0 	/* nce */
+					 &banka 3 0 	/* ale */
+					 &banka 4 0 	/* cle */
+					 0		/* nwp */>;
+
+				boot@100000 {
+					label = "Boot";
+					reg = <0x100000 0x80000>;
+				};
+
+				redundant-boot@200000 {
+					label = "Redundant Boot";
+					reg = <0x200000 0x80000>;
+				};
+
+				boot-env@300000 {
+					label = "Boot Evironment";
+					reg = <0x300000 0x20000>;
+				};
+
+				redundant-boot-env@320000 {
+					label = "Redundant Boot Environment";
+					reg = <0x300000 0x20000>;
+				};
+
+				kernel@380000 {
+					label = "Kernel";
+					reg = <0x380000 0x800000>;
+				};
+
+				fs@b80000 {
+					label = "File System";
+					reg = <0xb80000 0xf480000>;
+				};
+			};
+		};
+	};
+};

arch/arm/mach-picoxcell/Makefile

@@ -0,0 +1,3 @@
+obj-y	:= common.o
+obj-y	+= time.o
+obj-y	+= io.o

arch/arm/mach-picoxcell/Makefile.boot

@@ -0,0 +1 @@
+zreladdr-y := 0x00008000

arch/arm/mach-picoxcell/common.c

@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <mach/picoxcell_soc.h>
+
+#include "common.h"
+
+static void __init picoxcell_init_machine(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *picoxcell_dt_match[] = {
+	"picochip,pc3x2",
+	"picochip,pc3x3",
+	NULL
+};
+
+static const struct of_device_id vic_of_match[] __initconst = {
+	{ .compatible = "arm,pl192-vic" },
+	{ /* Sentinel */ }
+};
+
+static void __init picoxcell_init_irq(void)
+{
+	vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0);
+	vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0);
+	irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0);
+	irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32);
+}
+
+DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
+	.map_io		= picoxcell_map_io,
+	.nr_irqs	= ARCH_NR_IRQS,
+	.init_irq	= picoxcell_init_irq,
+	.timer		= &picoxcell_timer,
+	.init_machine	= picoxcell_init_machine,
+	.dt_compat	= picoxcell_dt_match,
+MACHINE_END

arch/arm/mach-picoxcell/common.h

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#ifndef __PICOXCELL_COMMON_H__
+#define __PICOXCELL_COMMON_H__
+
+#include <asm/mach/time.h>
+
+extern struct sys_timer picoxcell_timer;
+extern void picoxcell_map_io(void);
+
+#endif /* __PICOXCELL_COMMON_H__ */

arch/arm/mach-picoxcell/include/mach/debug-macro.S

@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#define UART_SHIFT 2
+
+		.macro	addruart, rp, rv
+		ldr	\rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
+		ldr	\rp, =PICOXCELL_UART1_BASE
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		/* The UART's don't have any flow control IO's wired up. */
+		.macro	waituart,rd,rx
+		.endm

arch/arm/mach-picoxcell/include/mach/entry-macro.S

@@ -0,0 +1,19 @@
+/*
+ * entry-macro.S
+ *
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * Low-level IRQ helper macros for picoXcell platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#define VA_VIC0		IO_ADDRESS(PICOXCELL_VIC0_BASE)
+#define VA_VIC1		IO_ADDRESS(PICOXCELL_VIC1_BASE)
+
+#include <asm/entry-macro-vic2.S>

arch/arm/mach-picoxcell/include/mach/gpio.h

@@ -0,0 +1 @@
+/* empty */

arch/arm/mach-picoxcell/include/mach/hardware.h

@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/picoxcell_soc.h>
+
+#endif

arch/arm/mach-picoxcell/include/mach/io.h

@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No ioports, but needed for driver compatibility. */
+#define __io(a)			__typesafe_io(a)
+/* No PCI possible on picoxcell. */
+#define __mem_pci(a)		(a)
+
+#endif /* __ASM_ARM_ARCH_IO_H */

arch/arm/mach-picoxcell/include/mach/irqs.h

@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define ARCH_NR_IRQS			64
+#define NR_IRQS				(128 + ARCH_NR_IRQS)
+
+#define IRQ_VIC0_BASE			0
+#define IRQ_VIC1_BASE			32
+
+#endif /* __MACH_IRQS_H */

arch/arm/mach-picoxcell/include/mach/map.h

@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PICOXCELL_MAP_H__
+#define __PICOXCELL_MAP_H__
+
+#define PHYS_TO_IO(x)		(((x) & 0x00ffffff) | 0xfe000000)
+
+#ifdef __ASSEMBLY__
+#define IO_ADDRESS(x)		PHYS_TO_IO((x))
+#else
+#define IO_ADDRESS(x)		(void __iomem __force *)(PHYS_TO_IO((x)))
+#endif
+
+#endif /* __PICOXCELL_MAP_H__ */

arch/arm/mach-picoxcell/include/mach/memory.h

@@ -0,0 +1 @@
+/* empty */

arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h

@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PICOXCELL_SOC_H__
+#define __PICOXCELL_SOC_H__
+
+#define PICOXCELL_UART1_BASE		0x80230000
+#define PICOXCELL_PERIPH_BASE		0x80000000
+#define PICOXCELL_PERIPH_LENGTH		SZ_4M
+#define PICOXCELL_VIC0_BASE		0x80060000
+#define PICOXCELL_VIC1_BASE		0x80064000
+
+#endif /* __PICOXCELL_SOC_H__ */

arch/arm/mach-picoxcell/include/mach/system.h

@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching and wait for interrupt
+	 * tricks.
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(int mode, const char *cmd)
+{
+	/* Watchdog reset to go here. */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */

arch/arm/mach-picoxcell/include/mach/timex.h

@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __TIMEX_H__
+#define __TIMEX_H__
+
+/* Bogus value to allow the kernel to compile. */
+#define CLOCK_TICK_RATE		1000000
+
+#endif /* __TIMEX_H__ */
+

arch/arm/mach-picoxcell/include/mach/uncompress.h

@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()

arch/arm/mach-picoxcell/include/mach/vmalloc.h

@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#define VMALLOC_END	0xfe000000UL

arch/arm/mach-picoxcell/io.c

@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/picoxcell_soc.h>
+
+#include "common.h"
+
+void __init picoxcell_map_io(void)
+{
+	struct map_desc io_map = {
+		.virtual	= PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
+		.pfn		= __phys_to_pfn(PICOXCELL_PERIPH_BASE),
+		.length		= PICOXCELL_PERIPH_LENGTH,
+		.type		= MT_DEVICE,
+	};
+
+	iotable_init(&io_map, 1);
+}

arch/arm/mach-picoxcell/time.c

@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/dw_apb_timer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched.h>
+
+#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
+
+#include "common.h"
+
+static void timer_get_base_and_rate(struct device_node *np,
+				    void __iomem **base, u32 *rate)
+{
+	*base = of_iomap(np, 0);
+
+	if (!*base)
+		panic("Unable to map regs for %s", np->name);
+
+	if (of_property_read_u32(np, "clock-freq", rate))
+		panic("No clock-freq property for %s", np->name);
+}
+
+static void picoxcell_add_clockevent(struct device_node *event_timer)
+{
+	void __iomem *iobase;
+	struct dw_apb_clock_event_device *ced;
+	u32 irq, rate;
+
+	irq = irq_of_parse_and_map(event_timer, 0);
+	if (irq == NO_IRQ)
+		panic("No IRQ for clock event timer");
+
+	timer_get_base_and_rate(event_timer, &iobase, &rate);
+
+	ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
+				     rate);
+	if (!ced)
+		panic("Unable to initialise clockevent device");
+
+	dw_apb_clockevent_register(ced);
+}
+
+static void picoxcell_add_clocksource(struct device_node *source_timer)
+{
+	void __iomem *iobase;
+	struct dw_apb_clocksource *cs;
+	u32 rate;
+
+	timer_get_base_and_rate(source_timer, &iobase, &rate);
+
+	cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
+	if (!cs)
+		panic("Unable to initialise clocksource device");
+
+	dw_apb_clocksource_start(cs);
+	dw_apb_clocksource_register(cs);
+}
+
+static DEFINE_CLOCK_DATA(cd);
+static void __iomem *sched_io_base;
+
+unsigned long long notrace sched_clock(void)
+{
+	cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
+
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace picoxcell_update_sched_clock(void)
+{
+	cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
+
+	update_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
+	{ .compatible = "picochip,pc3x2-rtc" },
+	{ /* Sentinel */ },
+};
+
+static void picoxcell_init_sched_clock(void)
+{
+	struct device_node *sched_timer;
+	u32 rate;
+
+	sched_timer = of_find_matching_node(NULL, picoxcell_rtc_ids);
+	if (!sched_timer)
+		panic("No RTC for sched clock to use");
+
+	timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
+	of_node_put(sched_timer);
+
+	init_sched_clock(&cd, picoxcell_update_sched_clock, 32, rate);
+}
+
+static const struct of_device_id picoxcell_timer_ids[] __initconst = {
+	{ .compatible = "picochip,pc3x2-timer" },
+	{},
+};
+
+static void __init picoxcell_timer_init(void)
+{
+	struct device_node *event_timer, *source_timer;
+
+	event_timer = of_find_matching_node(NULL, picoxcell_timer_ids);
+	if (!event_timer)
+		panic("No timer for clockevent");
+	picoxcell_add_clockevent(event_timer);
+
+	source_timer = of_find_matching_node(event_timer, picoxcell_timer_ids);
+	if (!source_timer)
+		panic("No timer for clocksource");
+	picoxcell_add_clocksource(source_timer);
+
+	of_node_put(source_timer);
+
+	picoxcell_init_sched_clock();
+}
+
+struct sys_timer picoxcell_timer = {
+	.init = picoxcell_timer_init,
+};