diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index 2f74cc4e093e..cee8080aa245 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -17,6 +17,7 @@ compatible = "schindler,cm5200"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -66,7 +67,6 @@ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; @@ -74,84 +74,76 @@ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x610 0x10>; interrupts = <1 10 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x620 0x10>; interrupts = <1 11 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x630 0x10>; interrupts = <1 12 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x640 0x10>; interrupts = <1 13 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x650 0x10>; interrupts = <1 14 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x660 0x10>; interrupts = <1 15 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x670 0x10>; interrupts = <1 16 0>; - interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <&mpc5200_pic>; }; - gpio@b00 { + gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; - gpio@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { @@ -161,7 +153,6 @@ 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -170,48 +161,34 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2200 { // PSC2 - device_type = "serial"; - compatible = "fsl,mpc5200-psc-uart"; - port-number = <1>; // Logical port assignment + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2200 0x100>; interrupts = <2 2 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2400 { // PSC3 - device_type = "serial"; - compatible = "fsl,mpc5200-psc-uart"; - port-number = <2>; // Logical port assignment + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2400 0x100>; interrupts = <2 3 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2c00 { // PSC6 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <5>; // Logical port assignment reg = <0x2c00 0x100>; interrupts = <2 4 0>; - interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; @@ -221,10 +198,8 @@ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@0 { - device_type = "ethernet-phy"; reg = <0>; }; }; @@ -235,7 +210,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -245,9 +219,8 @@ }; }; - lpb { - model = "fsl,lpb"; - compatible = "fsl,lpb"; + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0xfc000000 0x2000000>; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 3f7a5dce8de0..de30b3f9eb26 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -17,6 +17,7 @@ compatible = "fsl,lite5200"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -58,96 +59,74 @@ // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; - device_type = "interrupt-controller"; compatible = "fsl,mpc5200-pic"; reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <0>; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; timer@610 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <1>; reg = <0x610 0x10>; interrupts = <1 10 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <2>; reg = <0x620 0x10>; interrupts = <1 11 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <3>; reg = <0x630 0x10>; interrupts = <1 12 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <4>; reg = <0x640 0x10>; interrupts = <1 13 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <5>; reg = <0x650 0x10>; interrupts = <1 14 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <6>; reg = <0x660 0x10>; interrupts = <1 15 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <7>; reg = <0x670 0x10>; interrupts = <1 16 0>; - interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <&mpc5200_pic>; }; can@900 { compatible = "fsl,mpc5200-mscan"; - cell-index = <0>; interrupts = <2 17 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200-mscan"; - cell-index = <1>; interrupts = <2 18 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x980 0x80>; }; @@ -155,39 +134,33 @@ compatible = "fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { - device_type = "dma-controller"; compatible = "fsl,mpc5200-bestcomm"; reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -196,13 +169,10 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment cell-index = <0>; reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; // PSC2 in ac97 mode example @@ -211,7 +181,6 @@ // cell-index = <1>; // reg = <0x2200 0x100>; // interrupts = <2 2 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC3 in CODEC mode example @@ -220,27 +189,22 @@ // cell-index = <2>; // reg = <0x2400 0x100>; // interrupts = <2 3 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC4 in uart mode example //serial@2600 { // PSC4 - // device_type = "serial"; // compatible = "fsl,mpc5200-psc-uart"; // cell-index = <3>; // reg = <0x2600 0x100>; // interrupts = <2 11 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC5 in uart mode example //serial@2800 { // PSC5 - // device_type = "serial"; // compatible = "fsl,mpc5200-psc-uart"; // cell-index = <4>; // reg = <0x2800 0x100>; // interrupts = <2 12 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC6 in spi mode example @@ -249,16 +213,13 @@ // cell-index = <5>; // reg = <0x2c00 0x100>; // interrupts = <2 4 0>; - // interrupt-parent = <&mpc5200_pic>; //}; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; @@ -268,30 +229,24 @@ compatible = "fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@1 { - device_type = "ethernet-phy"; reg = <1>; }; }; ata@3a00 { - device_type = "ata"; compatible = "fsl,mpc5200-ata"; reg = <0x3a00 0x100>; interrupts = <2 7 0>; - interrupt-parent = <&mpc5200_pic>; }; i2c@3d00 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <0>; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -299,14 +254,12 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <1>; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; sram@8000 { - compatible = "fsl,mpc5200-sram","sram"; + compatible = "fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; }; @@ -325,7 +278,6 @@ 0xc000 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader interrupts = <2 8 0 2 9 0 2 10 0>; - interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 63e3bb48e843..c63e3566479e 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -17,6 +17,7 @@ compatible = "fsl,lite5200b"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -58,136 +59,112 @@ // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; - device_type = "interrupt-controller"; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <0>; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <1>; reg = <0x610 0x10>; interrupts = <1 10 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <2>; reg = <0x620 0x10>; interrupts = <1 11 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <3>; reg = <0x630 0x10>; interrupts = <1 12 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <4>; reg = <0x640 0x10>; interrupts = <1 13 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <5>; reg = <0x650 0x10>; interrupts = <1 14 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <6>; reg = <0x660 0x10>; interrupts = <1 15 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <7>; reg = <0x670 0x10>; interrupts = <1 16 0>; - interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <&mpc5200_pic>; }; can@900 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <0>; interrupts = <2 17 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <1>; interrupts = <2 18 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x980 0x80>; }; - gpio@b00 { + gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; - gpio@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { - device_type = "dma-controller"; compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -196,13 +173,10 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment cell-index = <0>; reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; // PSC2 in ac97 mode example @@ -211,7 +185,6 @@ // cell-index = <1>; // reg = <0x2200 0x100>; // interrupts = <2 2 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC3 in CODEC mode example @@ -220,27 +193,22 @@ // cell-index = <2>; // reg = <0x2400 0x100>; // interrupts = <2 3 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC4 in uart mode example //serial@2600 { // PSC4 - // device_type = "serial"; // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; // cell-index = <3>; // reg = <0x2600 0x100>; // interrupts = <2 11 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC5 in uart mode example //serial@2800 { // PSC5 - // device_type = "serial"; // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; // cell-index = <4>; // reg = <0x2800 0x100>; // interrupts = <2 12 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC6 in spi mode example @@ -249,49 +217,40 @@ // cell-index = <5>; // reg = <0x2c00 0x100>; // interrupts = <2 4 0>; - // interrupt-parent = <&mpc5200_pic>; //}; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; mdio@3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@0 { - device_type = "ethernet-phy"; reg = <0>; }; }; ata@3a00 { - device_type = "ata"; compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <0x3a00 0x100>; interrupts = <2 7 0>; - interrupt-parent = <&mpc5200_pic>; }; i2c@3d00 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <0>; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -299,14 +258,13 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <1>; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; + sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram"; + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; }; @@ -330,7 +288,6 @@ 0xc800 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader interrupts = <2 8 0 2 9 0 2 10 0>; - interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 52ba6f98b273..7be8ca038676 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -17,6 +17,7 @@ compatible = "promess,motionpro"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -66,7 +67,6 @@ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; @@ -74,35 +74,30 @@ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x610 0x10>; interrupts = <1 10 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x620 0x10>; interrupts = <1 11 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x630 0x10>; interrupts = <1 12 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x640 0x10>; interrupts = <1 13 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x650 0x10>; interrupts = <1 14 0>; - interrupt-parent = <&mpc5200_pic>; }; motionpro-led@660 { // Motion-PRO status LED @@ -110,7 +105,6 @@ label = "motionpro-statusled"; reg = <0x660 0x10>; interrupts = <1 15 0>; - interrupt-parent = <&mpc5200_pic>; blink-delay = <100>; // 100 msec }; @@ -119,49 +113,46 @@ label = "motionpro-readyled"; reg = <0x670 0x10>; interrupts = <1 16 0>; - interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <&mpc5200_pic>; }; can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; interrupts = <2 18 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x980 0x80>; }; - gpio@b00 { + gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; - gpio@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { @@ -171,7 +162,6 @@ 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -180,12 +170,9 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; // PSC2 in spi master mode @@ -194,26 +181,20 @@ cell-index = <1>; reg = <0x2200 0x100>; interrupts = <2 2 0>; - interrupt-parent = <&mpc5200_pic>; }; // PSC5 in uart mode serial@2800 { // PSC5 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <4>; // Logical port assignment reg = <0x2800 0x100>; interrupts = <2 12 0>; - interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; @@ -223,10 +204,8 @@ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@2 { - device_type = "ethernet-phy"; reg = <2>; }; }; @@ -235,7 +214,6 @@ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <0x3a00 0x100>; interrupts = <2 7 0>; - interrupt-parent = <&mpc5200_pic>; }; i2c@3d40 { @@ -244,7 +222,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; rtc@68 { @@ -259,8 +236,8 @@ }; }; - lpb { - compatible = "fsl,lpb"; + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0xff000000 0x01000000 @@ -273,7 +250,6 @@ compatible = "promess,motionpro-kollmorgen"; reg = <1 0 0x10000>; interrupts = <1 1 0>; - interrupt-parent = <&mpc5200_pic>; }; // 8-bit board CPLD on LocalPlus Bus CS2 diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index be2c11ca0594..895834713894 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -19,6 +19,7 @@ compatible = "phytec,pcm030"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -29,26 +30,26 @@ reg = <0>; d-cache-line-size = <32>; i-cache-line-size = <32>; - d-cache-size = <0x4000>; /* L1, 16K */ - i-cache-size = <0x4000>; /* L1, 16K */ - timebase-frequency = <0>; /* From Bootloader */ - bus-frequency = <0>; /* From Bootloader */ - clock-frequency = <0>; /* From Bootloader */ + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader }; }; memory { device_type = "memory"; - reg = <0x00000000 0x04000000>; /* 64MB */ + reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; - ranges = <0x0 0xf0000000 0x0000c000>; - bus-frequency = <0>; /* From bootloader */ - system-frequency = <0>; /* From bootloader */ + ranges = <0 0xf0000000 0x0000c000>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; @@ -56,87 +57,70 @@ }; mpc5200_pic: interrupt-controller@500 { - /* 5200 interrupts are encoded into two levels; */ + // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; - device_type = "interrupt-controller"; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; reg = <0x500 0x80>; }; - timer@600 { /* General Purpose Timer */ + timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <0>; reg = <0x600 0x10>; - interrupts = <0x1 0x9 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 9 0>; fsl,has-wdt; }; - timer@610 { /* General Purpose Timer */ + timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <1>; reg = <0x610 0x10>; - interrupts = <0x1 0xa 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 10 0>; }; - gpt2: timer@620 { /* General Purpose Timer in GPIO mode */ + gpt2: timer@620 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <2>; reg = <0x620 0x10>; - interrupts = <0x1 0xb 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 11 0>; gpio-controller; #gpio-cells = <2>; }; - gpt3: timer@630 { /* General Purpose Timer in GPIO mode */ + gpt3: timer@630 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <3>; reg = <0x630 0x10>; - interrupts = <0x1 0xc 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 12 0>; gpio-controller; #gpio-cells = <2>; }; - gpt4: timer@640 { /* General Purpose Timer in GPIO mode */ + gpt4: timer@640 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <4>; reg = <0x640 0x10>; - interrupts = <0x1 0xd 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 13 0>; gpio-controller; #gpio-cells = <2>; }; - gpt5: timer@650 { /* General Purpose Timer in GPIO mode */ + gpt5: timer@650 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <5>; reg = <0x650 0x10>; - interrupts = <0x1 0xe 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 14 0>; gpio-controller; #gpio-cells = <2>; }; - gpt6: timer@660 { /* General Purpose Timer in GPIO mode */ + gpt6: timer@660 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <6>; reg = <0x660 0x10>; - interrupts = <0x1 0xf 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 15 0>; gpio-controller; #gpio-cells = <2>; }; - gpt7: timer@670 { /* General Purpose Timer in GPIO mode */ + gpt7: timer@670 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <7>; reg = <0x670 0x10>; - interrupts = <0x1 0x10 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 16 0>; gpio-controller; #gpio-cells = <2>; }; @@ -144,40 +128,33 @@ rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; - interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 5 0 1 6 0>; }; can@900 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <0>; - interrupts = <0x2 0x11 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 17 0>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <1>; - interrupts = <0x2 0x12 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 18 0>; reg = <0x980 0x80>; }; gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; - interrupts = <0x1 0x7 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 7 0>; gpio-controller; #gpio-cells = <2>; }; - gpio_wkup: gpio-wkup@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; - interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 8 0 0 3 0>; gpio-controller; #gpio-cells = <2>; }; @@ -185,26 +162,22 @@ spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; - interrupts = <0x2 0xd 0x0 0x2 0xe 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 13 0 2 14 0>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; - interrupts = <0x2 0x6 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 6 0>; }; dma-controller@1200 { - device_type = "dma-controller"; compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; reg = <0x1200 0x80>; - interrupts = <0x3 0x0 0x0 0x3 0x1 0x0 0x3 0x2 0x0 0x3 0x3 0x0 - 0x3 0x4 0x0 0x3 0x5 0x0 0x3 0x6 0x0 0x3 0x7 0x0 - 0x3 0x8 0x0 0x3 0x9 0x0 0x3 0xa 0x0 0x3 0xb 0x0 - 0x3 0xc 0x0 0x3 0xd 0x0 0x3 0xe 0x0 0x3 0xf 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; }; xlb@1f00 { @@ -213,24 +186,19 @@ }; ac97@2000 { /* PSC1 in ac97 mode */ - device_type = "sound"; compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; cell-index = <0>; reg = <0x2000 0x100>; - interrupts = <0x2 0x2 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 1 0>; }; /* PSC2 port is used by CAN1/2 */ serial@2400 { /* PSC3 in UART mode */ - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; cell-index = <2>; reg = <0x2400 0x100>; - interrupts = <0x2 0x3 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 3 0>; }; /* PSC4 is ??? */ @@ -238,55 +206,44 @@ /* PSC5 is ??? */ serial@2c00 { /* PSC6 in UART mode */ - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <1>; cell-index = <5>; reg = <0x2c00 0x100>; - interrupts = <0x2 0x4 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 4 0>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; - local-mac-address = [00 00 00 00 00 00]; - interrupts = <0x2 0x5 0x0>; - interrupt-parent = <&mpc5200_pic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; /* fec range, since we need to setup fec interrupts */ - interrupts = <0x2 0x5 0x0>; /* these are for "mii command finished", not link changes & co. */ - interrupt-parent = <&mpc5200_pic>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - phy0:ethernet-phy@0 { - device_type = "ethernet-phy"; - reg = <0x0>; + phy0: ethernet-phy@0 { + reg = <0>; }; }; ata@3a00 { - device_type = "ata"; compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <0x3a00 0x100>; - interrupts = <0x2 0x7 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 7 0>; }; i2c@3d00 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <0>; reg = <0x3d00 0x40>; - interrupts = <0x2 0xf 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 15 0>; fsl5200-clocking; }; @@ -294,10 +251,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <1>; reg = <0x3d40 0x40>; - interrupts = <0x2 0x10 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 16 0>; fsl5200-clocking; rtc@51 { compatible = "nxp,pcf8563"; @@ -307,7 +262,7 @@ }; sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram"; + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; @@ -340,22 +295,21 @@ device_type = "pci"; compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; reg = <0xf0000d00 0x100>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 /* 1st slot */ - 0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3 - 0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3 - 0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3 + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 - 0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 /* 2nd slot */ - 0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3 - 0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3 - 0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>; + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader - interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 8 0 2 9 0 2 10 0>; bus-range = <0 0>; - ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; }; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index 906302e26a62..c9590b58b7b0 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -17,6 +17,7 @@ compatible = "tqc,tqm5200"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -66,36 +67,33 @@ compatible = "fsl,mpc5200-gpt"; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; can@900 { compatible = "fsl,mpc5200-mscan"; interrupts = <2 17 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200-mscan"; interrupts = <2 18 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x980 0x80>; }; - gpio@b00 { + gpio_simple: gpio@b00 { compatible = "fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; usb@1000 { compatible = "fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { @@ -105,7 +103,6 @@ 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -114,39 +111,28 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2200 { // PSC2 - device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; - port-number = <1>; // Logical port assignment reg = <0x2200 0x100>; interrupts = <2 2 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2400 { // PSC3 - device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; - port-number = <2>; // Logical port assignment reg = <0x2400 0x100>; interrupts = <2 3 0>; - interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; @@ -156,10 +142,8 @@ compatible = "fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@0 { - device_type = "ethernet-phy"; reg = <0>; }; }; @@ -168,7 +152,6 @@ compatible = "fsl,mpc5200-ata"; reg = <0x3a00 0x100>; interrupts = <2 7 0>; - interrupt-parent = <&mpc5200_pic>; }; i2c@3d40 { @@ -177,7 +160,6 @@ compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; rtc@68 { @@ -192,9 +174,8 @@ }; }; - lpb { - model = "fsl,lpb"; - compatible = "fsl,lpb"; + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0xfc000000 0x02000000>; @@ -223,7 +204,6 @@ 0xc000 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader interrupts = <2 8 0 2 9 0 2 10 0>; - interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 0x02000000 0 0x90000000 0x90000000 0 0x10000000