mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
i7300_idle: Remove this driver
In preparation for removing the idle_notifier, remove its only user, the i7300_idle driver. i7300_idle was deployed in 2008 to reduce idle memory power on systems using the i7300 chipset. The driver worked by throttling the fully-buffered DIMMs during idle periods using the IOAT DMA engine. The driver ran only on the i7300 chip-set, and no other hardware has used this mechanism. The driver no longer has a maintainer. Removing this driver will increase idle power on i7300 systems when they run the new kernel without the driver. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/ad6a044e57cc75f44cc8621abe846e58f7882243.1479449716.git.len.brown@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This commit is contained in:
parent
a25f0944ba
commit
b65ce83f2a
@ -6087,12 +6087,6 @@ S: Maintained
|
||||
F: Documentation/cdrom/ide-cd
|
||||
F: drivers/ide/ide-cd*
|
||||
|
||||
IDLE-I7300
|
||||
M: Andy Henroid <andrew.d.henroid@intel.com>
|
||||
L: linux-pm@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/idle/i7300_idle.c
|
||||
|
||||
IEEE 802.15.4 SUBSYSTEM
|
||||
M: Alexander Aring <aar@pengutronix.de>
|
||||
L: linux-wpan@vger.kernel.org
|
||||
|
@ -106,8 +106,6 @@
|
||||
#define IOAT_DMA_COMP_V1 0x0001 /* Compatibility with DMA version 1 */
|
||||
#define IOAT_DMA_COMP_V2 0x0002 /* Compatibility with DMA version 2 */
|
||||
|
||||
/* IOAT1 define left for i7300_idle driver to not fail compiling */
|
||||
#define IOAT1_CHANSTS_OFFSET 0x04
|
||||
#define IOAT_CHANSTS_OFFSET 0x08 /* 64-bit Channel Status Register */
|
||||
#define IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR (~0x3fULL)
|
||||
#define IOAT_CHANSTS_SOFT_ERR 0x10ULL
|
||||
|
@ -8,20 +8,3 @@ config INTEL_IDLE
|
||||
native Intel hardware idle features. The acpi_idle driver
|
||||
can be configured at the same time, in order to handle
|
||||
processors intel_idle does not support.
|
||||
|
||||
menu "Memory power savings"
|
||||
depends on X86_64
|
||||
|
||||
config I7300_IDLE_IOAT_CHANNEL
|
||||
bool
|
||||
|
||||
config I7300_IDLE
|
||||
tristate "Intel chipset idle memory power saving driver"
|
||||
select I7300_IDLE_IOAT_CHANNEL
|
||||
help
|
||||
Enable memory power savings when idle with certain Intel server
|
||||
chipsets. The chipset must have I/O AT support, such as the
|
||||
Intel 7300. The power savings depends on the type and quantity of
|
||||
DRAM devices.
|
||||
|
||||
endmenu
|
||||
|
@ -1,3 +1,2 @@
|
||||
obj-$(CONFIG_I7300_IDLE) += i7300_idle.o
|
||||
obj-$(CONFIG_INTEL_IDLE) += intel_idle.o
|
||||
|
||||
|
@ -1,612 +0,0 @@
|
||||
/*
|
||||
* (C) Copyright 2008 Intel Corporation
|
||||
* Authors:
|
||||
* Andy Henroid <andrew.d.henroid@intel.com>
|
||||
* Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
|
||||
*/
|
||||
|
||||
/*
|
||||
* Save DIMM power on Intel 7300-based platforms when all CPUs/cores
|
||||
* are idle, using the DIMM thermal throttling capability.
|
||||
*
|
||||
* This driver depends on the Intel integrated DMA controller (I/O AT).
|
||||
* If the driver for I/O AT (drivers/dma/ioatdma*) is also enabled,
|
||||
* this driver should work cooperatively.
|
||||
*/
|
||||
|
||||
/* #define DEBUG */
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/gfp.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/notifier.h>
|
||||
#include <linux/cpumask.h>
|
||||
#include <linux/ktime.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/debugfs.h>
|
||||
#include <linux/stop_machine.h>
|
||||
#include <linux/i7300_idle.h>
|
||||
|
||||
#include <asm/idle.h>
|
||||
|
||||
#include "../dma/ioat/hw.h"
|
||||
#include "../dma/ioat/registers.h"
|
||||
|
||||
#define I7300_IDLE_DRIVER_VERSION "1.55"
|
||||
#define I7300_PRINT "i7300_idle:"
|
||||
|
||||
#define MAX_STOP_RETRIES 10
|
||||
|
||||
static int debug;
|
||||
module_param_named(debug, debug, uint, 0644);
|
||||
MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
|
||||
|
||||
static int forceload;
|
||||
module_param_named(forceload, forceload, uint, 0644);
|
||||
MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000");
|
||||
|
||||
#define dprintk(fmt, arg...) \
|
||||
do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0)
|
||||
|
||||
/*
|
||||
* Value to set THRTLOW to when initiating throttling
|
||||
* 0 = No throttling
|
||||
* 1 = Throttle when > 4 activations per eval window (Maximum throttling)
|
||||
* 2 = Throttle when > 8 activations
|
||||
* 168 = Throttle when > 672 activations (Minimum throttling)
|
||||
*/
|
||||
#define MAX_THROTTLE_LOW_LIMIT 168
|
||||
static uint throttle_low_limit = 1;
|
||||
module_param_named(throttle_low_limit, throttle_low_limit, uint, 0644);
|
||||
MODULE_PARM_DESC(throttle_low_limit,
|
||||
"Value for THRTLOWLM activation field "
|
||||
"(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)");
|
||||
|
||||
/*
|
||||
* simple invocation and duration statistics
|
||||
*/
|
||||
static unsigned long total_starts;
|
||||
static unsigned long total_us;
|
||||
|
||||
#ifdef DEBUG
|
||||
static unsigned long past_skip;
|
||||
#endif
|
||||
|
||||
static struct pci_dev *fbd_dev;
|
||||
|
||||
static raw_spinlock_t i7300_idle_lock;
|
||||
static int i7300_idle_active;
|
||||
|
||||
static u8 i7300_idle_thrtctl_saved;
|
||||
static u8 i7300_idle_thrtlow_saved;
|
||||
static u32 i7300_idle_mc_saved;
|
||||
|
||||
static cpumask_var_t idle_cpumask;
|
||||
static ktime_t start_ktime;
|
||||
static unsigned long avg_idle_us;
|
||||
|
||||
static struct dentry *debugfs_dir;
|
||||
|
||||
/* Begin: I/O AT Helper routines */
|
||||
|
||||
#define IOAT_CHANBASE(ioat_ctl, chan) (ioat_ctl + 0x80 + 0x80 * chan)
|
||||
/* Snoop control (disable snoops when coherency is not important) */
|
||||
#define IOAT_DESC_SADDR_SNP_CTL (1UL << 1)
|
||||
#define IOAT_DESC_DADDR_SNP_CTL (1UL << 2)
|
||||
|
||||
static struct pci_dev *ioat_dev;
|
||||
static struct ioat_dma_descriptor *ioat_desc; /* I/O AT desc & data (1 page) */
|
||||
static unsigned long ioat_desc_phys;
|
||||
static u8 *ioat_iomap; /* I/O AT memory-mapped control regs (aka CB_BAR) */
|
||||
static u8 *ioat_chanbase;
|
||||
|
||||
/* Start I/O AT memory copy */
|
||||
static int i7300_idle_ioat_start(void)
|
||||
{
|
||||
u32 err;
|
||||
/* Clear error (due to circular descriptor pointer) */
|
||||
err = readl(ioat_chanbase + IOAT_CHANERR_OFFSET);
|
||||
if (err)
|
||||
writel(err, ioat_chanbase + IOAT_CHANERR_OFFSET);
|
||||
|
||||
writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Stop I/O AT memory copy */
|
||||
static void i7300_idle_ioat_stop(void)
|
||||
{
|
||||
int i;
|
||||
u64 sts;
|
||||
|
||||
for (i = 0; i < MAX_STOP_RETRIES; i++) {
|
||||
writeb(IOAT_CHANCMD_RESET,
|
||||
ioat_chanbase + IOAT1_CHANCMD_OFFSET);
|
||||
|
||||
udelay(10);
|
||||
|
||||
sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
|
||||
IOAT_CHANSTS_STATUS;
|
||||
|
||||
if (sts != IOAT_CHANSTS_ACTIVE)
|
||||
break;
|
||||
|
||||
}
|
||||
|
||||
if (i == MAX_STOP_RETRIES) {
|
||||
dprintk("failed to stop I/O AT after %d retries\n",
|
||||
MAX_STOP_RETRIES);
|
||||
}
|
||||
}
|
||||
|
||||
/* Test I/O AT by copying 1024 byte from 2k to 1k */
|
||||
static int __init i7300_idle_ioat_selftest(u8 *ctl,
|
||||
struct ioat_dma_descriptor *desc, unsigned long desc_phys)
|
||||
{
|
||||
u64 chan_sts;
|
||||
|
||||
memset(desc, 0, 2048);
|
||||
memset((u8 *) desc + 2048, 0xab, 1024);
|
||||
|
||||
desc[0].size = 1024;
|
||||
desc[0].ctl = 0;
|
||||
desc[0].src_addr = desc_phys + 2048;
|
||||
desc[0].dst_addr = desc_phys + 1024;
|
||||
desc[0].next = 0;
|
||||
|
||||
writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
|
||||
writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
|
||||
|
||||
udelay(1000);
|
||||
|
||||
chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
|
||||
IOAT_CHANSTS_STATUS;
|
||||
|
||||
if (chan_sts != IOAT_CHANSTS_DONE) {
|
||||
/* Not complete, reset the channel */
|
||||
writeb(IOAT_CHANCMD_RESET,
|
||||
ioat_chanbase + IOAT1_CHANCMD_OFFSET);
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (*(u32 *) ((u8 *) desc + 3068) != 0xabababab ||
|
||||
*(u32 *) ((u8 *) desc + 2044) != 0xabababab) {
|
||||
dprintk("Data values src 0x%x, dest 0x%x, memset 0x%x\n",
|
||||
*(u32 *) ((u8 *) desc + 2048),
|
||||
*(u32 *) ((u8 *) desc + 1024),
|
||||
*(u32 *) ((u8 *) desc + 3072));
|
||||
return -1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct device dummy_dma_dev = {
|
||||
.init_name = "fallback device",
|
||||
.coherent_dma_mask = DMA_BIT_MASK(64),
|
||||
.dma_mask = &dummy_dma_dev.coherent_dma_mask,
|
||||
};
|
||||
|
||||
/* Setup and initialize I/O AT */
|
||||
/* This driver needs I/O AT as the throttling takes effect only when there is
|
||||
* some memory activity. We use I/O AT to set up a dummy copy, while all CPUs
|
||||
* go idle and memory is throttled.
|
||||
*/
|
||||
static int __init i7300_idle_ioat_init(void)
|
||||
{
|
||||
u8 ver, chan_count, ioat_chan;
|
||||
u16 chan_ctl;
|
||||
|
||||
ioat_iomap = (u8 *) ioremap_nocache(pci_resource_start(ioat_dev, 0),
|
||||
pci_resource_len(ioat_dev, 0));
|
||||
|
||||
if (!ioat_iomap) {
|
||||
printk(KERN_ERR I7300_PRINT "failed to map I/O AT registers\n");
|
||||
goto err_ret;
|
||||
}
|
||||
|
||||
ver = readb(ioat_iomap + IOAT_VER_OFFSET);
|
||||
if (ver != IOAT_VER_1_2) {
|
||||
printk(KERN_ERR I7300_PRINT "unknown I/O AT version (%u.%u)\n",
|
||||
ver >> 4, ver & 0xf);
|
||||
goto err_unmap;
|
||||
}
|
||||
|
||||
chan_count = readb(ioat_iomap + IOAT_CHANCNT_OFFSET);
|
||||
if (!chan_count) {
|
||||
printk(KERN_ERR I7300_PRINT "unexpected # of I/O AT channels "
|
||||
"(%u)\n",
|
||||
chan_count);
|
||||
goto err_unmap;
|
||||
}
|
||||
|
||||
ioat_chan = chan_count - 1;
|
||||
ioat_chanbase = IOAT_CHANBASE(ioat_iomap, ioat_chan);
|
||||
|
||||
chan_ctl = readw(ioat_chanbase + IOAT_CHANCTRL_OFFSET);
|
||||
if (chan_ctl & IOAT_CHANCTRL_CHANNEL_IN_USE) {
|
||||
printk(KERN_ERR I7300_PRINT "channel %d in use\n", ioat_chan);
|
||||
goto err_unmap;
|
||||
}
|
||||
|
||||
writew(IOAT_CHANCTRL_CHANNEL_IN_USE,
|
||||
ioat_chanbase + IOAT_CHANCTRL_OFFSET);
|
||||
|
||||
ioat_desc = (struct ioat_dma_descriptor *)dma_alloc_coherent(
|
||||
&dummy_dma_dev, 4096,
|
||||
(dma_addr_t *)&ioat_desc_phys, GFP_KERNEL);
|
||||
if (!ioat_desc) {
|
||||
printk(KERN_ERR I7300_PRINT "failed to allocate I/O AT desc\n");
|
||||
goto err_mark_unused;
|
||||
}
|
||||
|
||||
writel(ioat_desc_phys & 0xffffffffUL,
|
||||
ioat_chanbase + IOAT1_CHAINADDR_OFFSET_LOW);
|
||||
writel(ioat_desc_phys >> 32,
|
||||
ioat_chanbase + IOAT1_CHAINADDR_OFFSET_HIGH);
|
||||
|
||||
if (i7300_idle_ioat_selftest(ioat_iomap, ioat_desc, ioat_desc_phys)) {
|
||||
printk(KERN_ERR I7300_PRINT "I/O AT self-test failed\n");
|
||||
goto err_free;
|
||||
}
|
||||
|
||||
/* Setup circular I/O AT descriptor chain */
|
||||
ioat_desc[0].ctl = IOAT_DESC_SADDR_SNP_CTL | IOAT_DESC_DADDR_SNP_CTL;
|
||||
ioat_desc[0].src_addr = ioat_desc_phys + 2048;
|
||||
ioat_desc[0].dst_addr = ioat_desc_phys + 3072;
|
||||
ioat_desc[0].size = 128;
|
||||
ioat_desc[0].next = ioat_desc_phys + sizeof(struct ioat_dma_descriptor);
|
||||
|
||||
ioat_desc[1].ctl = ioat_desc[0].ctl;
|
||||
ioat_desc[1].src_addr = ioat_desc[0].src_addr;
|
||||
ioat_desc[1].dst_addr = ioat_desc[0].dst_addr;
|
||||
ioat_desc[1].size = ioat_desc[0].size;
|
||||
ioat_desc[1].next = ioat_desc_phys;
|
||||
|
||||
return 0;
|
||||
|
||||
err_free:
|
||||
dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0);
|
||||
err_mark_unused:
|
||||
writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET);
|
||||
err_unmap:
|
||||
iounmap(ioat_iomap);
|
||||
err_ret:
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Cleanup I/O AT */
|
||||
static void __exit i7300_idle_ioat_exit(void)
|
||||
{
|
||||
int i;
|
||||
u64 chan_sts;
|
||||
|
||||
i7300_idle_ioat_stop();
|
||||
|
||||
/* Wait for a while for the channel to halt before releasing */
|
||||
for (i = 0; i < MAX_STOP_RETRIES; i++) {
|
||||
writeb(IOAT_CHANCMD_RESET,
|
||||
ioat_chanbase + IOAT1_CHANCMD_OFFSET);
|
||||
|
||||
chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
|
||||
IOAT_CHANSTS_STATUS;
|
||||
|
||||
if (chan_sts != IOAT_CHANSTS_ACTIVE) {
|
||||
writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET);
|
||||
break;
|
||||
}
|
||||
udelay(1000);
|
||||
}
|
||||
|
||||
chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
|
||||
IOAT_CHANSTS_STATUS;
|
||||
|
||||
/*
|
||||
* We tried to reset multiple times. If IO A/T channel is still active
|
||||
* flag an error and return without cleanup. Memory leak is better
|
||||
* than random corruption in that extreme error situation.
|
||||
*/
|
||||
if (chan_sts == IOAT_CHANSTS_ACTIVE) {
|
||||
printk(KERN_ERR I7300_PRINT "Unable to stop IO A/T channels."
|
||||
" Not freeing resources\n");
|
||||
return;
|
||||
}
|
||||
|
||||
dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0);
|
||||
iounmap(ioat_iomap);
|
||||
}
|
||||
|
||||
/* End: I/O AT Helper routines */
|
||||
|
||||
#define DIMM_THRTLOW 0x64
|
||||
#define DIMM_THRTCTL 0x67
|
||||
#define DIMM_THRTCTL_THRMHUNT (1UL << 0)
|
||||
#define DIMM_MC 0x40
|
||||
#define DIMM_GTW_MODE (1UL << 17)
|
||||
#define DIMM_GBLACT 0x60
|
||||
|
||||
/*
|
||||
* Keep track of an exponential-decaying average of recent idle durations.
|
||||
* The latest duration gets DURATION_WEIGHT_PCT percentage weight
|
||||
* in this average, with the old average getting the remaining weight.
|
||||
*
|
||||
* High weights emphasize recent history, low weights include long history.
|
||||
*/
|
||||
#define DURATION_WEIGHT_PCT 55
|
||||
|
||||
/*
|
||||
* When the decaying average of recent durations or the predicted duration
|
||||
* of the next timer interrupt is shorter than duration_threshold, the
|
||||
* driver will decline to throttle.
|
||||
*/
|
||||
#define DURATION_THRESHOLD_US 100
|
||||
|
||||
|
||||
/* Store DIMM thermal throttle configuration */
|
||||
static int i7300_idle_thrt_save(void)
|
||||
{
|
||||
u32 new_mc_val;
|
||||
u8 gblactlm;
|
||||
|
||||
pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &i7300_idle_thrtctl_saved);
|
||||
pci_read_config_byte(fbd_dev, DIMM_THRTLOW, &i7300_idle_thrtlow_saved);
|
||||
pci_read_config_dword(fbd_dev, DIMM_MC, &i7300_idle_mc_saved);
|
||||
/*
|
||||
* Make sure we have Global Throttling Window Mode set to have a
|
||||
* "short" window. This (mostly) works around an issue where
|
||||
* throttling persists until the end of the global throttling window
|
||||
* size. On the tested system, this was resulting in a maximum of
|
||||
* 64 ms to exit throttling (average 32 ms). The actual numbers
|
||||
* depends on system frequencies. Setting the short window reduces
|
||||
* this by a factor of 4096.
|
||||
*
|
||||
* We will only do this only if the system is set for
|
||||
* unlimited-activations while in open-loop throttling (i.e., when
|
||||
* Global Activation Throttle Limit is zero).
|
||||
*/
|
||||
pci_read_config_byte(fbd_dev, DIMM_GBLACT, &gblactlm);
|
||||
dprintk("thrtctl_saved = 0x%02x, thrtlow_saved = 0x%02x\n",
|
||||
i7300_idle_thrtctl_saved,
|
||||
i7300_idle_thrtlow_saved);
|
||||
dprintk("mc_saved = 0x%08x, gblactlm = 0x%02x\n",
|
||||
i7300_idle_mc_saved,
|
||||
gblactlm);
|
||||
if (gblactlm == 0) {
|
||||
new_mc_val = i7300_idle_mc_saved | DIMM_GTW_MODE;
|
||||
pci_write_config_dword(fbd_dev, DIMM_MC, new_mc_val);
|
||||
return 0;
|
||||
} else {
|
||||
dprintk("could not set GTW_MODE = 1 (OLTT enabled)\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
}
|
||||
|
||||
/* Restore DIMM thermal throttle configuration */
|
||||
static void i7300_idle_thrt_restore(void)
|
||||
{
|
||||
pci_write_config_dword(fbd_dev, DIMM_MC, i7300_idle_mc_saved);
|
||||
pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved);
|
||||
pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved);
|
||||
}
|
||||
|
||||
/* Enable DIMM thermal throttling */
|
||||
static void i7300_idle_start(void)
|
||||
{
|
||||
u8 new_ctl;
|
||||
u8 limit;
|
||||
|
||||
new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT;
|
||||
pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
|
||||
|
||||
limit = throttle_low_limit;
|
||||
if (unlikely(limit > MAX_THROTTLE_LOW_LIMIT))
|
||||
limit = MAX_THROTTLE_LOW_LIMIT;
|
||||
|
||||
pci_write_config_byte(fbd_dev, DIMM_THRTLOW, limit);
|
||||
|
||||
new_ctl = i7300_idle_thrtctl_saved | DIMM_THRTCTL_THRMHUNT;
|
||||
pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
|
||||
}
|
||||
|
||||
/* Disable DIMM thermal throttling */
|
||||
static void i7300_idle_stop(void)
|
||||
{
|
||||
u8 new_ctl;
|
||||
u8 got_ctl;
|
||||
|
||||
new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT;
|
||||
pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
|
||||
|
||||
pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved);
|
||||
pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved);
|
||||
pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &got_ctl);
|
||||
WARN_ON_ONCE(got_ctl != i7300_idle_thrtctl_saved);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* i7300_avg_duration_check()
|
||||
* return 0 if the decaying average of recent idle durations is
|
||||
* more than DURATION_THRESHOLD_US
|
||||
*/
|
||||
static int i7300_avg_duration_check(void)
|
||||
{
|
||||
if (avg_idle_us >= DURATION_THRESHOLD_US)
|
||||
return 0;
|
||||
|
||||
#ifdef DEBUG
|
||||
past_skip++;
|
||||
#endif
|
||||
return 1;
|
||||
}
|
||||
|
||||
/* Idle notifier to look at idle CPUs */
|
||||
static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val,
|
||||
void *data)
|
||||
{
|
||||
unsigned long flags;
|
||||
ktime_t now_ktime;
|
||||
static ktime_t idle_begin_time;
|
||||
static int time_init = 1;
|
||||
|
||||
if (!throttle_low_limit)
|
||||
return 0;
|
||||
|
||||
if (unlikely(time_init)) {
|
||||
time_init = 0;
|
||||
idle_begin_time = ktime_get();
|
||||
}
|
||||
|
||||
raw_spin_lock_irqsave(&i7300_idle_lock, flags);
|
||||
if (val == IDLE_START) {
|
||||
|
||||
cpumask_set_cpu(smp_processor_id(), idle_cpumask);
|
||||
|
||||
if (cpumask_weight(idle_cpumask) != num_online_cpus())
|
||||
goto end;
|
||||
|
||||
now_ktime = ktime_get();
|
||||
idle_begin_time = now_ktime;
|
||||
|
||||
if (i7300_avg_duration_check())
|
||||
goto end;
|
||||
|
||||
i7300_idle_active = 1;
|
||||
total_starts++;
|
||||
start_ktime = now_ktime;
|
||||
|
||||
i7300_idle_start();
|
||||
i7300_idle_ioat_start();
|
||||
|
||||
} else if (val == IDLE_END) {
|
||||
cpumask_clear_cpu(smp_processor_id(), idle_cpumask);
|
||||
if (cpumask_weight(idle_cpumask) == (num_online_cpus() - 1)) {
|
||||
/* First CPU coming out of idle */
|
||||
u64 idle_duration_us;
|
||||
|
||||
now_ktime = ktime_get();
|
||||
|
||||
idle_duration_us = ktime_to_us(ktime_sub
|
||||
(now_ktime, idle_begin_time));
|
||||
|
||||
avg_idle_us =
|
||||
((100 - DURATION_WEIGHT_PCT) * avg_idle_us +
|
||||
DURATION_WEIGHT_PCT * idle_duration_us) / 100;
|
||||
|
||||
if (i7300_idle_active) {
|
||||
ktime_t idle_ktime;
|
||||
|
||||
idle_ktime = ktime_sub(now_ktime, start_ktime);
|
||||
total_us += ktime_to_us(idle_ktime);
|
||||
|
||||
i7300_idle_ioat_stop();
|
||||
i7300_idle_stop();
|
||||
i7300_idle_active = 0;
|
||||
}
|
||||
}
|
||||
}
|
||||
end:
|
||||
raw_spin_unlock_irqrestore(&i7300_idle_lock, flags);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct notifier_block i7300_idle_nb = {
|
||||
.notifier_call = i7300_idle_notifier,
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(pci, pci_tbl);
|
||||
|
||||
static ssize_t stats_read_ul(struct file *fp, char __user *ubuf, size_t count,
|
||||
loff_t *off)
|
||||
{
|
||||
unsigned long *p = fp->private_data;
|
||||
char buf[32];
|
||||
int len;
|
||||
|
||||
len = snprintf(buf, 32, "%lu\n", *p);
|
||||
return simple_read_from_buffer(ubuf, count, off, buf, len);
|
||||
}
|
||||
|
||||
static const struct file_operations idle_fops = {
|
||||
.open = simple_open,
|
||||
.read = stats_read_ul,
|
||||
.llseek = default_llseek,
|
||||
};
|
||||
|
||||
struct debugfs_file_info {
|
||||
void *ptr;
|
||||
char name[32];
|
||||
struct dentry *file;
|
||||
} debugfs_file_list[] = {
|
||||
{&total_starts, "total_starts", NULL},
|
||||
{&total_us, "total_us", NULL},
|
||||
#ifdef DEBUG
|
||||
{&past_skip, "past_skip", NULL},
|
||||
#endif
|
||||
{NULL, "", NULL}
|
||||
};
|
||||
|
||||
static int __init i7300_idle_init(void)
|
||||
{
|
||||
raw_spin_lock_init(&i7300_idle_lock);
|
||||
total_us = 0;
|
||||
|
||||
if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload))
|
||||
return -ENODEV;
|
||||
|
||||
if (i7300_idle_thrt_save())
|
||||
return -ENODEV;
|
||||
|
||||
if (i7300_idle_ioat_init())
|
||||
return -ENODEV;
|
||||
|
||||
if (!zalloc_cpumask_var(&idle_cpumask, GFP_KERNEL))
|
||||
return -ENOMEM;
|
||||
|
||||
debugfs_dir = debugfs_create_dir("i7300_idle", NULL);
|
||||
if (debugfs_dir) {
|
||||
int i = 0;
|
||||
|
||||
while (debugfs_file_list[i].ptr != NULL) {
|
||||
debugfs_file_list[i].file = debugfs_create_file(
|
||||
debugfs_file_list[i].name,
|
||||
S_IRUSR,
|
||||
debugfs_dir,
|
||||
debugfs_file_list[i].ptr,
|
||||
&idle_fops);
|
||||
i++;
|
||||
}
|
||||
}
|
||||
|
||||
idle_notifier_register(&i7300_idle_nb);
|
||||
|
||||
printk(KERN_INFO "i7300_idle: loaded v%s\n", I7300_IDLE_DRIVER_VERSION);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __exit i7300_idle_exit(void)
|
||||
{
|
||||
idle_notifier_unregister(&i7300_idle_nb);
|
||||
free_cpumask_var(idle_cpumask);
|
||||
|
||||
if (debugfs_dir) {
|
||||
int i = 0;
|
||||
|
||||
while (debugfs_file_list[i].file != NULL) {
|
||||
debugfs_remove(debugfs_file_list[i].file);
|
||||
i++;
|
||||
}
|
||||
|
||||
debugfs_remove(debugfs_dir);
|
||||
}
|
||||
i7300_idle_thrt_restore();
|
||||
i7300_idle_ioat_exit();
|
||||
}
|
||||
|
||||
module_init(i7300_idle_init);
|
||||
module_exit(i7300_idle_exit);
|
||||
|
||||
MODULE_AUTHOR("Andy Henroid <andrew.d.henroid@intel.com>");
|
||||
MODULE_DESCRIPTION("Intel Chipset DIMM Idle Power Saving Driver v"
|
||||
I7300_IDLE_DRIVER_VERSION);
|
||||
MODULE_LICENSE("GPL");
|
Loading…
Reference in New Issue
Block a user