mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 23:14:31 +08:00
scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES
Qualcomm UFS Controller V4 and above supports multiple unipro frequencies like 403MHz, 300MHz, 202MHz, 150 MHz, 75Mhz, 37.5 MHz. Current code supports only 150MHz and 75MHz which have performance impact due to low UFS controller frequencies. For targets which supports frequencies other than 150 MHz and 75 Mhz, needs an update of MAX_CORE_CLK_1US_CYCLES to match the configured frequency to avoid functionality issues. Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES based on the frequency configured. Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com> Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> Link: https://lore.kernel.org/r/20230905052400.13935-3-quic_nitirawa@quicinc.com Reviewed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
parent
07d2290fe8
commit
b4e13e1ae9
@ -93,8 +93,7 @@ static const struct __ufs_qcom_bw_table {
|
||||
static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
|
||||
|
||||
static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
|
||||
static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
|
||||
u32 clk_cycles);
|
||||
static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up);
|
||||
|
||||
static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd)
|
||||
{
|
||||
@ -685,14 +684,11 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (ufs_qcom_cap_qunipro(host))
|
||||
/*
|
||||
* set unipro core clock cycles to 150 & clear clock
|
||||
* divider
|
||||
*/
|
||||
err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba,
|
||||
150);
|
||||
|
||||
if (ufs_qcom_cap_qunipro(host)) {
|
||||
err = ufs_qcom_set_core_clk_ctrl(hba, true);
|
||||
if (err)
|
||||
dev_err(hba->dev, "cfg core clk ctrl failed\n");
|
||||
}
|
||||
/*
|
||||
* Some UFS devices (and may be host) have issues if LCC is
|
||||
* enabled. So we are setting PA_Local_TX_LCC_Enable to 0
|
||||
@ -1296,12 +1292,25 @@ static void ufs_qcom_exit(struct ufs_hba *hba)
|
||||
phy_exit(host->generic_phy);
|
||||
}
|
||||
|
||||
static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
|
||||
u32 clk_cycles)
|
||||
static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up)
|
||||
{
|
||||
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
||||
int err;
|
||||
struct list_head *head = &hba->clk_list_head;
|
||||
struct ufs_clk_info *clki;
|
||||
u32 cycles_in_1us;
|
||||
u32 core_clk_ctrl_reg;
|
||||
int err;
|
||||
|
||||
list_for_each_entry(clki, head, list) {
|
||||
if (!IS_ERR_OR_NULL(clki->clk) &&
|
||||
!strcmp(clki->name, "core_clk_unipro")) {
|
||||
if (is_scale_up)
|
||||
cycles_in_1us = ceil(clki->max_freq, (1000 * 1000));
|
||||
else
|
||||
cycles_in_1us = ceil(clk_get_rate(clki->clk), (1000 * 1000));
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
err = ufshcd_dme_get(hba,
|
||||
UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
|
||||
@ -1311,15 +1320,15 @@ static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
|
||||
|
||||
/* Bit mask is different for UFS host controller V4.0.0 onwards */
|
||||
if (host->hw_ver.major >= 4) {
|
||||
if (!FIELD_FIT(CLK_1US_CYCLES_MASK_V4, clk_cycles))
|
||||
if (!FIELD_FIT(CLK_1US_CYCLES_MASK_V4, cycles_in_1us))
|
||||
return -ERANGE;
|
||||
core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK_V4;
|
||||
core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK_V4, clk_cycles);
|
||||
core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK_V4, cycles_in_1us);
|
||||
} else {
|
||||
if (!FIELD_FIT(CLK_1US_CYCLES_MASK, clk_cycles))
|
||||
if (!FIELD_FIT(CLK_1US_CYCLES_MASK, cycles_in_1us))
|
||||
return -ERANGE;
|
||||
core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK;
|
||||
core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK, clk_cycles);
|
||||
core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK, cycles_in_1us);
|
||||
}
|
||||
|
||||
/* Clear CORE_CLK_DIV_EN */
|
||||
@ -1343,8 +1352,8 @@ static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
|
||||
if (!ufs_qcom_cap_qunipro(host))
|
||||
return 0;
|
||||
|
||||
/* set unipro core clock cycles to 150 and clear clock divider */
|
||||
return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150);
|
||||
/* set unipro core clock attributes and clear clock divider */
|
||||
return ufs_qcom_set_core_clk_ctrl(hba, true);
|
||||
}
|
||||
|
||||
static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
|
||||
@ -1379,8 +1388,8 @@ static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
|
||||
if (!ufs_qcom_cap_qunipro(host))
|
||||
return 0;
|
||||
|
||||
/* set unipro core clock cycles to 75 and clear clock divider */
|
||||
return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75);
|
||||
/* set unipro core clock attributes and clear clock divider */
|
||||
return ufs_qcom_set_core_clk_ctrl(hba, false);
|
||||
}
|
||||
|
||||
static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
|
||||
|
@ -245,6 +245,7 @@ ufs_qcom_get_debug_reg_offset(struct ufs_qcom_host *host, u32 reg)
|
||||
#define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
|
||||
#define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
|
||||
#define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
|
||||
#define ceil(freq, div) ((freq) % (div) == 0 ? ((freq)/(div)) : ((freq)/(div) + 1))
|
||||
|
||||
int ufs_qcom_testbus_config(struct ufs_qcom_host *host);
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user