spi: add Broadcom BCM63xx SPI controller driver

This patch adds support for the SPI controller found on the Broadcom BCM63xx
SoCs.

Signed-off-by: Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
Florian Fainelli 2012-02-01 11:14:09 +01:00 committed by Grant Likely
parent 1cc2df9d6f
commit b42dfed83d
3 changed files with 493 additions and 0 deletions

View File

@ -94,6 +94,12 @@ config SPI_AU1550
If you say yes to this option, support will be included for the
PSC SPI controller found on Au1550, Au1200 and Au1300 series.
config SPI_BCM63XX
tristate "Broadcom BCM63xx SPI controller"
depends on BCM63XX
help
Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
config SPI_BITBANG
tristate "Utilities for Bitbanging SPI masters"
help

View File

@ -14,6 +14,7 @@ obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o

486
drivers/spi/spi-bcm63xx.c Normal file
View File

@ -0,0 +1,486 @@
/*
* Broadcom BCM63xx SPI controller support
*
* Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
* Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/spi/spi.h>
#include <linux/completion.h>
#include <linux/err.h>
#include <bcm63xx_dev_spi.h>
#define PFX KBUILD_MODNAME
#define DRV_VER "0.1.2"
struct bcm63xx_spi {
spinlock_t lock;
int stopping;
struct completion done;
void __iomem *regs;
int irq;
/* Platform data */
u32 speed_hz;
unsigned fifo_size;
/* Data buffers */
const unsigned char *tx_ptr;
unsigned char *rx_ptr;
/* data iomem */
u8 __iomem *tx_io;
const u8 __iomem *rx_io;
int remaining_bytes;
struct clk *clk;
struct platform_device *pdev;
};
static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs,
unsigned int offset)
{
return bcm_readb(bs->regs + bcm63xx_spireg(offset));
}
static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs,
unsigned int offset)
{
return bcm_readw(bs->regs + bcm63xx_spireg(offset));
}
static inline void bcm_spi_writeb(struct bcm63xx_spi *bs,
u8 value, unsigned int offset)
{
bcm_writeb(value, bs->regs + bcm63xx_spireg(offset));
}
static inline void bcm_spi_writew(struct bcm63xx_spi *bs,
u16 value, unsigned int offset)
{
bcm_writew(value, bs->regs + bcm63xx_spireg(offset));
}
static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = {
{ 20000000, SPI_CLK_20MHZ },
{ 12500000, SPI_CLK_12_50MHZ },
{ 6250000, SPI_CLK_6_250MHZ },
{ 3125000, SPI_CLK_3_125MHZ },
{ 1563000, SPI_CLK_1_563MHZ },
{ 781000, SPI_CLK_0_781MHZ },
{ 391000, SPI_CLK_0_391MHZ }
};
static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
struct spi_transfer *t)
{
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
u8 bits_per_word;
u8 clk_cfg, reg;
u32 hz;
int i;
bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
hz = (t) ? t->speed_hz : spi->max_speed_hz;
if (bits_per_word != 8) {
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
__func__, bits_per_word);
return -EINVAL;
}
if (spi->chip_select > spi->master->num_chipselect) {
dev_err(&spi->dev, "%s, unsupported slave %d\n",
__func__, spi->chip_select);
return -EINVAL;
}
/* Find the closest clock configuration */
for (i = 0; i < SPI_CLK_MASK; i++) {
if (hz <= bcm63xx_spi_freq_table[i][0]) {
clk_cfg = bcm63xx_spi_freq_table[i][1];
break;
}
}
/* No matching configuration found, default to lowest */
if (i == SPI_CLK_MASK)
clk_cfg = SPI_CLK_0_391MHZ;
/* clear existing clock configuration bits of the register */
reg = bcm_spi_readb(bs, SPI_CLK_CFG);
reg &= ~SPI_CLK_MASK;
reg |= clk_cfg;
bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
clk_cfg, hz);
return 0;
}
/* the spi->mode bits understood by this driver: */
#define MODEBITS (SPI_CPOL | SPI_CPHA)
static int bcm63xx_spi_setup(struct spi_device *spi)
{
struct bcm63xx_spi *bs;
int ret;
bs = spi_master_get_devdata(spi->master);
if (bs->stopping)
return -ESHUTDOWN;
if (!spi->bits_per_word)
spi->bits_per_word = 8;
if (spi->mode & ~MODEBITS) {
dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
__func__, spi->mode & ~MODEBITS);
return -EINVAL;
}
ret = bcm63xx_spi_setup_transfer(spi, NULL);
if (ret < 0) {
dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
spi->mode & ~MODEBITS);
return ret;
}
dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
__func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
return 0;
}
/* Fill the TX FIFO with as many bytes as possible */
static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
{
u8 size;
/* Fill the Tx FIFO with as many bytes as possible */
size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes :
bs->fifo_size;
memcpy_toio(bs->tx_io, bs->tx_ptr, size);
bs->remaining_bytes -= size;
}
static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
{
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
u16 msg_ctl;
u16 cmd;
dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
t->tx_buf, t->rx_buf, t->len);
/* Transmitter is inhibited */
bs->tx_ptr = t->tx_buf;
bs->rx_ptr = t->rx_buf;
init_completion(&bs->done);
if (t->tx_buf) {
bs->remaining_bytes = t->len;
bcm63xx_spi_fill_tx_fifo(bs);
}
/* Enable the command done interrupt which
* we use to determine completion of a command */
bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
/* Fill in the Message control register */
msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
if (t->rx_buf && t->tx_buf)
msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
else if (t->rx_buf)
msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT);
else if (t->tx_buf)
msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT);
bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
/* Issue the transfer */
cmd = SPI_CMD_START_IMMEDIATE;
cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
bcm_spi_writew(bs, cmd, SPI_CMD);
wait_for_completion(&bs->done);
/* Disable the CMD_DONE interrupt */
bcm_spi_writeb(bs, 0, SPI_INT_MASK);
return t->len - bs->remaining_bytes;
}
static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
{
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
struct spi_transfer *t;
int ret = 0;
if (unlikely(list_empty(&m->transfers)))
return -EINVAL;
if (bs->stopping)
return -ESHUTDOWN;
list_for_each_entry(t, &m->transfers, transfer_list) {
ret += bcm63xx_txrx_bufs(spi, t);
}
m->complete(m->context);
return ret;
}
/* This driver supports single master mode only. Hence
* CMD_DONE is the only interrupt we care about
*/
static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
{
struct spi_master *master = (struct spi_master *)dev_id;
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
u8 intr;
u16 cmd;
/* Read interupts and clear them immediately */
intr = bcm_spi_readb(bs, SPI_INT_STATUS);
bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
bcm_spi_writeb(bs, 0, SPI_INT_MASK);
/* A tansfer completed */
if (intr & SPI_INTR_CMD_DONE) {
u8 rx_tail;
rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
/* Read out all the data */
if (rx_tail)
memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
/* See if there is more data to send */
if (bs->remaining_bytes > 0) {
bcm63xx_spi_fill_tx_fifo(bs);
/* Start the transfer */
bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
SPI_MSG_CTL);
cmd = bcm_spi_readw(bs, SPI_CMD);
cmd |= SPI_CMD_START_IMMEDIATE;
cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
bcm_spi_writew(bs, cmd, SPI_CMD);
} else {
complete(&bs->done);
}
}
return IRQ_HANDLED;
}
static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
{
struct resource *r;
struct device *dev = &pdev->dev;
struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data;
int irq;
struct spi_master *master;
struct clk *clk;
struct bcm63xx_spi *bs;
int ret;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
dev_err(dev, "no iomem\n");
ret = -ENXIO;
goto out;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "no irq\n");
ret = -ENXIO;
goto out;
}
clk = clk_get(dev, "spi");
if (IS_ERR(clk)) {
dev_err(dev, "no clock for device\n");
ret = PTR_ERR(clk);
goto out;
}
master = spi_alloc_master(dev, sizeof(*bs));
if (!master) {
dev_err(dev, "out of memory\n");
ret = -ENOMEM;
goto out_clk;
}
bs = spi_master_get_devdata(master);
init_completion(&bs->done);
platform_set_drvdata(pdev, master);
bs->pdev = pdev;
if (!devm_request_mem_region(&pdev->dev, r->start,
resource_size(r), PFX)) {
dev_err(dev, "iomem request failed\n");
ret = -ENXIO;
goto out_err;
}
bs->regs = devm_ioremap_nocache(&pdev->dev, r->start,
resource_size(r));
if (!bs->regs) {
dev_err(dev, "unable to ioremap regs\n");
ret = -ENOMEM;
goto out_err;
}
bs->irq = irq;
bs->clk = clk;
bs->fifo_size = pdata->fifo_size;
ret = devm_request_irq(&pdev->dev, irq, bcm63xx_spi_interrupt, 0,
pdev->name, master);
if (ret) {
dev_err(dev, "unable to request irq\n");
goto out_err;
}
master->bus_num = pdata->bus_num;
master->num_chipselect = pdata->num_chipselect;
master->setup = bcm63xx_spi_setup;
master->transfer = bcm63xx_transfer;
bs->speed_hz = pdata->speed_hz;
bs->stopping = 0;
bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
spin_lock_init(&bs->lock);
/* Initialize hardware */
clk_enable(bs->clk);
bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
/* register and we are done */
ret = spi_register_master(master);
if (ret) {
dev_err(dev, "spi register failed\n");
goto out_clk_disable;
}
dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n",
r->start, irq, bs->fifo_size, DRV_VER);
return 0;
out_clk_disable:
clk_disable(clk);
out_err:
platform_set_drvdata(pdev, NULL);
spi_master_put(master);
out_clk:
clk_put(clk);
out:
return ret;
}
static int __devexit bcm63xx_spi_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
/* reset spi block */
bcm_spi_writeb(bs, 0, SPI_INT_MASK);
spin_lock(&bs->lock);
bs->stopping = 1;
/* HW shutdown */
clk_disable(bs->clk);
clk_put(bs->clk);
spin_unlock(&bs->lock);
platform_set_drvdata(pdev, 0);
spi_unregister_master(master);
return 0;
}
#ifdef CONFIG_PM
static int bcm63xx_spi_suspend(struct device *dev)
{
struct spi_master *master =
platform_get_drvdata(to_platform_device(dev));
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
clk_disable(bs->clk);
return 0;
}
static int bcm63xx_spi_resume(struct device *dev)
{
struct spi_master *master =
platform_get_drvdata(to_platform_device(dev));
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
clk_enable(bs->clk);
return 0;
}
static const struct dev_pm_ops bcm63xx_spi_pm_ops = {
.suspend = bcm63xx_spi_suspend,
.resume = bcm63xx_spi_resume,
};
#define BCM63XX_SPI_PM_OPS (&bcm63xx_spi_pm_ops)
#else
#define BCM63XX_SPI_PM_OPS NULL
#endif
static struct platform_driver bcm63xx_spi_driver = {
.driver = {
.name = "bcm63xx-spi",
.owner = THIS_MODULE,
.pm = BCM63XX_SPI_PM_OPS,
},
.probe = bcm63xx_spi_probe,
.remove = __devexit_p(bcm63xx_spi_remove),
};
module_platform_driver(bcm63xx_spi_driver);
MODULE_ALIAS("platform:bcm63xx_spi");
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>");
MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
MODULE_LICENSE("GPL");