mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 15:04:27 +08:00
PCI/ASPM: Fix deadlock when enabling ASPM
commit1e56086415upstream. A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes:f93e71aea6("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7 [bhelgaas: backported to v6.6.y, which contains8cc22ba3f7("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()""), a backport off93e71aea6. This omits the drivers/pci/controller/dwc/pcie-qcom.c hunk that updates qcom_pcie_enable_aspm(), which was added by9f4f3dfad8("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops"), which is not present in v6.6.28.] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Johan Hovold
Greg Kroah-Hartman
parent
3b62923977
commit
b0f4478838
@ -386,21 +386,8 @@ void pci_bus_add_devices(const struct pci_bus *bus)
|
||||
}
|
||||
EXPORT_SYMBOL(pci_bus_add_devices);
|
||||
|
||||
/** pci_walk_bus - walk devices on/under bus, calling callback.
|
||||
* @top bus whose devices should be walked
|
||||
* @cb callback to be called for each device found
|
||||
* @userdata arbitrary pointer to be passed to callback.
|
||||
*
|
||||
* Walk the given bus, including any bridged devices
|
||||
* on buses under this bus. Call the provided callback
|
||||
* on each device found.
|
||||
*
|
||||
* We check the return of @cb each time. If it returns anything
|
||||
* other than 0, we break out.
|
||||
*
|
||||
*/
|
||||
void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
|
||||
void *userdata)
|
||||
static void __pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
|
||||
void *userdata, bool locked)
|
||||
{
|
||||
struct pci_dev *dev;
|
||||
struct pci_bus *bus;
|
||||
@ -408,7 +395,8 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
|
||||
int retval;
|
||||
|
||||
bus = top;
|
||||
down_read(&pci_bus_sem);
|
||||
if (!locked)
|
||||
down_read(&pci_bus_sem);
|
||||
next = top->devices.next;
|
||||
for (;;) {
|
||||
if (next == &bus->devices) {
|
||||
@ -431,10 +419,37 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
|
||||
if (retval)
|
||||
break;
|
||||
}
|
||||
up_read(&pci_bus_sem);
|
||||
if (!locked)
|
||||
up_read(&pci_bus_sem);
|
||||
}
|
||||
|
||||
/**
|
||||
* pci_walk_bus - walk devices on/under bus, calling callback.
|
||||
* @top: bus whose devices should be walked
|
||||
* @cb: callback to be called for each device found
|
||||
* @userdata: arbitrary pointer to be passed to callback
|
||||
*
|
||||
* Walk the given bus, including any bridged devices
|
||||
* on buses under this bus. Call the provided callback
|
||||
* on each device found.
|
||||
*
|
||||
* We check the return of @cb each time. If it returns anything
|
||||
* other than 0, we break out.
|
||||
*/
|
||||
void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata)
|
||||
{
|
||||
__pci_walk_bus(top, cb, userdata, false);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pci_walk_bus);
|
||||
|
||||
void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata)
|
||||
{
|
||||
lockdep_assert_held(&pci_bus_sem);
|
||||
|
||||
__pci_walk_bus(top, cb, userdata, true);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pci_walk_bus_locked);
|
||||
|
||||
struct pci_bus *pci_bus_get(struct pci_bus *bus)
|
||||
{
|
||||
if (bus)
|
||||
|
||||
@ -1291,6 +1291,7 @@ end:
|
||||
/**
|
||||
* pci_set_full_power_state - Put a PCI device into D0 and update its state
|
||||
* @dev: PCI device to power up
|
||||
* @locked: whether pci_bus_sem is held
|
||||
*
|
||||
* Call pci_power_up() to put @dev into D0, read from its PCI_PM_CTRL register
|
||||
* to confirm the state change, restore its BARs if they might be lost and
|
||||
@ -1300,7 +1301,7 @@ end:
|
||||
* to D0, it is more efficient to use pci_power_up() directly instead of this
|
||||
* function.
|
||||
*/
|
||||
static int pci_set_full_power_state(struct pci_dev *dev)
|
||||
static int pci_set_full_power_state(struct pci_dev *dev, bool locked)
|
||||
{
|
||||
u16 pmcsr;
|
||||
int ret;
|
||||
@ -1336,7 +1337,7 @@ static int pci_set_full_power_state(struct pci_dev *dev)
|
||||
}
|
||||
|
||||
if (dev->bus->self)
|
||||
pcie_aspm_pm_state_change(dev->bus->self);
|
||||
pcie_aspm_pm_state_change(dev->bus->self, locked);
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -1365,10 +1366,22 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
|
||||
pci_walk_bus(bus, __pci_dev_set_current_state, &state);
|
||||
}
|
||||
|
||||
static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state, bool locked)
|
||||
{
|
||||
if (!bus)
|
||||
return;
|
||||
|
||||
if (locked)
|
||||
pci_walk_bus_locked(bus, __pci_dev_set_current_state, &state);
|
||||
else
|
||||
pci_walk_bus(bus, __pci_dev_set_current_state, &state);
|
||||
}
|
||||
|
||||
/**
|
||||
* pci_set_low_power_state - Put a PCI device into a low-power state.
|
||||
* @dev: PCI device to handle.
|
||||
* @state: PCI power state (D1, D2, D3hot) to put the device into.
|
||||
* @locked: whether pci_bus_sem is held
|
||||
*
|
||||
* Use the device's PCI_PM_CTRL register to put it into a low-power state.
|
||||
*
|
||||
@ -1379,7 +1392,7 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
|
||||
* 0 if device already is in the requested state.
|
||||
* 0 if device's power state has been successfully changed.
|
||||
*/
|
||||
static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
|
||||
static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state, bool locked)
|
||||
{
|
||||
u16 pmcsr;
|
||||
|
||||
@ -1433,29 +1446,12 @@ static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
|
||||
pci_power_name(state));
|
||||
|
||||
if (dev->bus->self)
|
||||
pcie_aspm_pm_state_change(dev->bus->self);
|
||||
pcie_aspm_pm_state_change(dev->bus->self, locked);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* pci_set_power_state - Set the power state of a PCI device
|
||||
* @dev: PCI device to handle.
|
||||
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
|
||||
*
|
||||
* Transition a device to a new power state, using the platform firmware and/or
|
||||
* the device's PCI PM registers.
|
||||
*
|
||||
* RETURN VALUE:
|
||||
* -EINVAL if the requested state is invalid.
|
||||
* -EIO if device does not support PCI PM or its PM capabilities register has a
|
||||
* wrong version, or device doesn't support the requested state.
|
||||
* 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
|
||||
* 0 if device already is in the requested state.
|
||||
* 0 if the transition is to D3 but D3 is not supported.
|
||||
* 0 if device's power state has been successfully changed.
|
||||
*/
|
||||
int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
|
||||
static int __pci_set_power_state(struct pci_dev *dev, pci_power_t state, bool locked)
|
||||
{
|
||||
int error;
|
||||
|
||||
@ -1479,7 +1475,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
|
||||
return 0;
|
||||
|
||||
if (state == PCI_D0)
|
||||
return pci_set_full_power_state(dev);
|
||||
return pci_set_full_power_state(dev, locked);
|
||||
|
||||
/*
|
||||
* This device is quirked not to be put into D3, so don't put it in
|
||||
@ -1493,16 +1489,16 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
|
||||
* To put the device in D3cold, put it into D3hot in the native
|
||||
* way, then put it into D3cold using platform ops.
|
||||
*/
|
||||
error = pci_set_low_power_state(dev, PCI_D3hot);
|
||||
error = pci_set_low_power_state(dev, PCI_D3hot, locked);
|
||||
|
||||
if (pci_platform_power_transition(dev, PCI_D3cold))
|
||||
return error;
|
||||
|
||||
/* Powering off a bridge may power off the whole hierarchy */
|
||||
if (dev->current_state == PCI_D3cold)
|
||||
pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
|
||||
__pci_bus_set_current_state(dev->subordinate, PCI_D3cold, locked);
|
||||
} else {
|
||||
error = pci_set_low_power_state(dev, state);
|
||||
error = pci_set_low_power_state(dev, state, locked);
|
||||
|
||||
if (pci_platform_power_transition(dev, state))
|
||||
return error;
|
||||
@ -1510,8 +1506,38 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* pci_set_power_state - Set the power state of a PCI device
|
||||
* @dev: PCI device to handle.
|
||||
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
|
||||
*
|
||||
* Transition a device to a new power state, using the platform firmware and/or
|
||||
* the device's PCI PM registers.
|
||||
*
|
||||
* RETURN VALUE:
|
||||
* -EINVAL if the requested state is invalid.
|
||||
* -EIO if device does not support PCI PM or its PM capabilities register has a
|
||||
* wrong version, or device doesn't support the requested state.
|
||||
* 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
|
||||
* 0 if device already is in the requested state.
|
||||
* 0 if the transition is to D3 but D3 is not supported.
|
||||
* 0 if device's power state has been successfully changed.
|
||||
*/
|
||||
int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
|
||||
{
|
||||
return __pci_set_power_state(dev, state, false);
|
||||
}
|
||||
EXPORT_SYMBOL(pci_set_power_state);
|
||||
|
||||
int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state)
|
||||
{
|
||||
lockdep_assert_held(&pci_bus_sem);
|
||||
|
||||
return __pci_set_power_state(dev, state, true);
|
||||
}
|
||||
EXPORT_SYMBOL(pci_set_power_state_locked);
|
||||
|
||||
#define PCI_EXP_SAVE_REGS 7
|
||||
|
||||
static struct pci_cap_saved_state *_pci_find_saved_cap(struct pci_dev *pci_dev,
|
||||
|
||||
@ -561,12 +561,12 @@ int pcie_retrain_link(struct pci_dev *pdev, bool use_lt);
|
||||
#ifdef CONFIG_PCIEASPM
|
||||
void pcie_aspm_init_link_state(struct pci_dev *pdev);
|
||||
void pcie_aspm_exit_link_state(struct pci_dev *pdev);
|
||||
void pcie_aspm_pm_state_change(struct pci_dev *pdev);
|
||||
void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked);
|
||||
void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
|
||||
#else
|
||||
static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
|
||||
static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
|
||||
static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
|
||||
static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked) { }
|
||||
static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
|
||||
#endif
|
||||
|
||||
|
||||
@ -1001,8 +1001,11 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev)
|
||||
up_read(&pci_bus_sem);
|
||||
}
|
||||
|
||||
/* @pdev: the root port or switch downstream port */
|
||||
void pcie_aspm_pm_state_change(struct pci_dev *pdev)
|
||||
/*
|
||||
* @pdev: the root port or switch downstream port
|
||||
* @locked: whether pci_bus_sem is held
|
||||
*/
|
||||
void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked)
|
||||
{
|
||||
struct pcie_link_state *link = pdev->link_state;
|
||||
|
||||
@ -1012,12 +1015,14 @@ void pcie_aspm_pm_state_change(struct pci_dev *pdev)
|
||||
* Devices changed PM state, we should recheck if latency
|
||||
* meets all functions' requirement
|
||||
*/
|
||||
down_read(&pci_bus_sem);
|
||||
if (!locked)
|
||||
down_read(&pci_bus_sem);
|
||||
mutex_lock(&aspm_lock);
|
||||
pcie_update_aspm_capable(link->root);
|
||||
pcie_config_aspm_path(link);
|
||||
mutex_unlock(&aspm_lock);
|
||||
up_read(&pci_bus_sem);
|
||||
if (!locked)
|
||||
up_read(&pci_bus_sem);
|
||||
}
|
||||
|
||||
void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
|
||||
|
||||
@ -1391,6 +1391,7 @@ int pci_load_and_free_saved_state(struct pci_dev *dev,
|
||||
struct pci_saved_state **state);
|
||||
int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state);
|
||||
int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
|
||||
int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state);
|
||||
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
|
||||
bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
|
||||
void pci_pme_active(struct pci_dev *dev, bool enable);
|
||||
@ -1594,6 +1595,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
|
||||
|
||||
void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
|
||||
void *userdata);
|
||||
void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
|
||||
void *userdata);
|
||||
int pci_cfg_space_size(struct pci_dev *dev);
|
||||
unsigned char pci_bus_max_busnr(struct pci_bus *bus);
|
||||
void pci_setup_bridge(struct pci_bus *bus);
|
||||
@ -1990,6 +1993,8 @@ static inline int pci_save_state(struct pci_dev *dev) { return 0; }
|
||||
static inline void pci_restore_state(struct pci_dev *dev) { }
|
||||
static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
|
||||
{ return 0; }
|
||||
static inline int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state)
|
||||
{ return 0; }
|
||||
static inline int pci_wake_from_d3(struct pci_dev *dev, bool enable)
|
||||
{ return 0; }
|
||||
static inline pci_power_t pci_choose_state(struct pci_dev *dev,
|
||||
|
||||
Loading…
Reference in New Issue
Block a user