mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
i2c: Add generic I2C multiplexer using pinctrl API
This is useful for SoCs whose I2C module's signals can be routed to
different sets of pins at run-time, using the pinctrl API.
+-----+ +-----+
| dev | | dev |
+------------------------+ +-----+ +-----+
| SoC | | |
| /----|------+--------+
| +---+ +------+ | child bus A, on first set of pins
| |I2C|---|Pinmux| |
| +---+ +------+ | child bus B, on second set of pins
| \----|------+--------+--------+
| | | | |
+------------------------+ +-----+ +-----+ +-----+
| dev | | dev | | dev |
+-----+ +-----+ +-----+
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
This commit is contained in:
Stephen Warren
Wolfram Sang
parent
f8f5701bda
commit
ae58d1e406
93
Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
Normal file
93
Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
Normal file
@ -0,0 +1,93 @@
|
||||
Pinctrl-based I2C Bus Mux
|
||||
|
||||
This binding describes an I2C bus multiplexer that uses pin multiplexing to
|
||||
route the I2C signals, and represents the pin multiplexing configuration
|
||||
using the pinctrl device tree bindings.
|
||||
|
||||
+-----+ +-----+
|
||||
| dev | | dev |
|
||||
+------------------------+ +-----+ +-----+
|
||||
| SoC | | |
|
||||
| /----|------+--------+
|
||||
| +---+ +------+ | child bus A, on first set of pins
|
||||
| |I2C|---|Pinmux| |
|
||||
| +---+ +------+ | child bus B, on second set of pins
|
||||
| \----|------+--------+--------+
|
||||
| | | | |
|
||||
+------------------------+ +-----+ +-----+ +-----+
|
||||
| dev | | dev | | dev |
|
||||
+-----+ +-----+ +-----+
|
||||
|
||||
Required properties:
|
||||
- compatible: i2c-mux-pinctrl
|
||||
- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
|
||||
port is connected to.
|
||||
|
||||
Also required are:
|
||||
|
||||
* Standard pinctrl properties that specify the pin mux state for each child
|
||||
bus. See ../pinctrl/pinctrl-bindings.txt.
|
||||
|
||||
* Standard I2C mux properties. See mux.txt in this directory.
|
||||
|
||||
* I2C child bus nodes. See mux.txt in this directory.
|
||||
|
||||
For each named state defined in the pinctrl-names property, an I2C child bus
|
||||
will be created. I2C child bus numbers are assigned based on the index into
|
||||
the pinctrl-names property.
|
||||
|
||||
The only exception is that no bus will be created for a state named "idle". If
|
||||
such a state is defined, it must be the last entry in pinctrl-names. For
|
||||
example:
|
||||
|
||||
pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1
|
||||
pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last)
|
||||
pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last)
|
||||
|
||||
Whenever an access is made to a device on a child bus, the relevant pinctrl
|
||||
state will be programmed into hardware.
|
||||
|
||||
If an idle state is defined, whenever an access is not being made to a device
|
||||
on a child bus, the idle pinctrl state will be programmed into hardware.
|
||||
|
||||
If an idle state is not defined, the most recently used pinctrl state will be
|
||||
left programmed into hardware whenever no access is being made of a device on
|
||||
a child bus.
|
||||
|
||||
Example:
|
||||
|
||||
i2cmux {
|
||||
compatible = "i2c-mux-pinctrl";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
i2c-parent = <&i2c1>;
|
||||
|
||||
pinctrl-names = "ddc", "pta", "idle";
|
||||
pinctrl-0 = <&state_i2cmux_ddc>;
|
||||
pinctrl-1 = <&state_i2cmux_pta>;
|
||||
pinctrl-2 = <&state_i2cmux_idle>;
|
||||
|
||||
i2c@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
eeprom {
|
||||
compatible = "eeprom";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
eeprom {
|
||||
compatible = "eeprom";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -37,4 +37,16 @@ config I2C_MUX_PCA954x
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-mux-pca954x.
|
||||
|
||||
config I2C_MUX_PINCTRL
|
||||
tristate "pinctrl-based I2C multiplexer"
|
||||
depends on PINCTRL
|
||||
help
|
||||
If you say yes to this option, support will be included for an I2C
|
||||
multiplexer that uses the pinctrl subsystem, i.e. pin multiplexing.
|
||||
This is useful for SoCs whose I2C module's signals can be routed to
|
||||
different sets of pins at run-time.
|
||||
|
||||
This driver can also be built as a module. If so, the module will be
|
||||
called pinctrl-i2cmux.
|
||||
|
||||
endmenu
|
||||
|
||||
@ -4,5 +4,6 @@
|
||||
obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o
|
||||
obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
|
||||
obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
|
||||
obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o
|
||||
|
||||
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
|
||||
|
||||
279
drivers/i2c/muxes/i2c-mux-pinctrl.c
Normal file
279
drivers/i2c/muxes/i2c-mux-pinctrl.c
Normal file
@ -0,0 +1,279 @@
|
||||
/*
|
||||
* I2C multiplexer using pinctrl API
|
||||
*
|
||||
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
* version 2, as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c-mux.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_i2c.h>
|
||||
#include <linux/pinctrl/consumer.h>
|
||||
#include <linux/i2c-mux-pinctrl.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
struct i2c_mux_pinctrl {
|
||||
struct device *dev;
|
||||
struct i2c_mux_pinctrl_platform_data *pdata;
|
||||
struct pinctrl *pinctrl;
|
||||
struct pinctrl_state **states;
|
||||
struct pinctrl_state *state_idle;
|
||||
struct i2c_adapter *parent;
|
||||
struct i2c_adapter **busses;
|
||||
};
|
||||
|
||||
static int i2c_mux_pinctrl_select(struct i2c_adapter *adap, void *data,
|
||||
u32 chan)
|
||||
{
|
||||
struct i2c_mux_pinctrl *mux = data;
|
||||
|
||||
return pinctrl_select_state(mux->pinctrl, mux->states[chan]);
|
||||
}
|
||||
|
||||
static int i2c_mux_pinctrl_deselect(struct i2c_adapter *adap, void *data,
|
||||
u32 chan)
|
||||
{
|
||||
struct i2c_mux_pinctrl *mux = data;
|
||||
|
||||
return pinctrl_select_state(mux->pinctrl, mux->state_idle);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
|
||||
struct platform_device *pdev)
|
||||
{
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
int num_names, i, ret;
|
||||
struct device_node *adapter_np;
|
||||
struct i2c_adapter *adapter;
|
||||
|
||||
if (!np)
|
||||
return 0;
|
||||
|
||||
mux->pdata = devm_kzalloc(&pdev->dev, sizeof(*mux->pdata), GFP_KERNEL);
|
||||
if (!mux->pdata) {
|
||||
dev_err(mux->dev,
|
||||
"Cannot allocate i2c_mux_pinctrl_platform_data\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
num_names = of_property_count_strings(np, "pinctrl-names");
|
||||
if (num_names < 0) {
|
||||
dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
|
||||
num_names);
|
||||
return num_names;
|
||||
}
|
||||
|
||||
mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev,
|
||||
sizeof(*mux->pdata->pinctrl_states) * num_names,
|
||||
GFP_KERNEL);
|
||||
if (!mux->pdata->pinctrl_states) {
|
||||
dev_err(mux->dev, "Cannot allocate pinctrl_states\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
for (i = 0; i < num_names; i++) {
|
||||
ret = of_property_read_string_index(np, "pinctrl-names", i,
|
||||
&mux->pdata->pinctrl_states[mux->pdata->bus_count]);
|
||||
if (ret < 0) {
|
||||
dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
if (!strcmp(mux->pdata->pinctrl_states[mux->pdata->bus_count],
|
||||
"idle")) {
|
||||
if (i != num_names - 1) {
|
||||
dev_err(mux->dev, "idle state must be last\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
mux->pdata->pinctrl_state_idle = "idle";
|
||||
} else {
|
||||
mux->pdata->bus_count++;
|
||||
}
|
||||
}
|
||||
|
||||
adapter_np = of_parse_phandle(np, "i2c-parent", 0);
|
||||
if (!adapter_np) {
|
||||
dev_err(mux->dev, "Cannot parse i2c-parent\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
adapter = of_find_i2c_adapter_by_node(adapter_np);
|
||||
if (!adapter) {
|
||||
dev_err(mux->dev, "Cannot find parent bus\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
mux->pdata->parent_bus_num = i2c_adapter_id(adapter);
|
||||
put_device(&adapter->dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#else
|
||||
static inline int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
|
||||
struct platform_device *pdev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static int __devinit i2c_mux_pinctrl_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct i2c_mux_pinctrl *mux;
|
||||
int (*deselect)(struct i2c_adapter *, void *, u32);
|
||||
int i, ret;
|
||||
|
||||
mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
|
||||
if (!mux) {
|
||||
dev_err(&pdev->dev, "Cannot allocate i2c_mux_pinctrl\n");
|
||||
ret = -ENOMEM;
|
||||
goto err;
|
||||
}
|
||||
platform_set_drvdata(pdev, mux);
|
||||
|
||||
mux->dev = &pdev->dev;
|
||||
|
||||
mux->pdata = pdev->dev.platform_data;
|
||||
if (!mux->pdata) {
|
||||
ret = i2c_mux_pinctrl_parse_dt(mux, pdev);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
}
|
||||
if (!mux->pdata) {
|
||||
dev_err(&pdev->dev, "Missing platform data\n");
|
||||
ret = -ENODEV;
|
||||
goto err;
|
||||
}
|
||||
|
||||
mux->states = devm_kzalloc(&pdev->dev,
|
||||
sizeof(*mux->states) * mux->pdata->bus_count,
|
||||
GFP_KERNEL);
|
||||
if (!mux->states) {
|
||||
dev_err(&pdev->dev, "Cannot allocate states\n");
|
||||
ret = -ENOMEM;
|
||||
goto err;
|
||||
}
|
||||
|
||||
mux->busses = devm_kzalloc(&pdev->dev,
|
||||
sizeof(mux->busses) * mux->pdata->bus_count,
|
||||
GFP_KERNEL);
|
||||
if (!mux->states) {
|
||||
dev_err(&pdev->dev, "Cannot allocate busses\n");
|
||||
ret = -ENOMEM;
|
||||
goto err;
|
||||
}
|
||||
|
||||
mux->pinctrl = devm_pinctrl_get(&pdev->dev);
|
||||
if (IS_ERR(mux->pinctrl)) {
|
||||
ret = PTR_ERR(mux->pinctrl);
|
||||
dev_err(&pdev->dev, "Cannot get pinctrl: %d\n", ret);
|
||||
goto err;
|
||||
}
|
||||
for (i = 0; i < mux->pdata->bus_count; i++) {
|
||||
mux->states[i] = pinctrl_lookup_state(mux->pinctrl,
|
||||
mux->pdata->pinctrl_states[i]);
|
||||
if (IS_ERR(mux->states[i])) {
|
||||
ret = PTR_ERR(mux->states[i]);
|
||||
dev_err(&pdev->dev,
|
||||
"Cannot look up pinctrl state %s: %d\n",
|
||||
mux->pdata->pinctrl_states[i], ret);
|
||||
goto err;
|
||||
}
|
||||
}
|
||||
if (mux->pdata->pinctrl_state_idle) {
|
||||
mux->state_idle = pinctrl_lookup_state(mux->pinctrl,
|
||||
mux->pdata->pinctrl_state_idle);
|
||||
if (IS_ERR(mux->state_idle)) {
|
||||
ret = PTR_ERR(mux->state_idle);
|
||||
dev_err(&pdev->dev,
|
||||
"Cannot look up pinctrl state %s: %d\n",
|
||||
mux->pdata->pinctrl_state_idle, ret);
|
||||
goto err;
|
||||
}
|
||||
|
||||
deselect = i2c_mux_pinctrl_deselect;
|
||||
} else {
|
||||
deselect = NULL;
|
||||
}
|
||||
|
||||
mux->parent = i2c_get_adapter(mux->pdata->parent_bus_num);
|
||||
if (!mux->parent) {
|
||||
dev_err(&pdev->dev, "Parent adapter (%d) not found\n",
|
||||
mux->pdata->parent_bus_num);
|
||||
ret = -ENODEV;
|
||||
goto err;
|
||||
}
|
||||
|
||||
for (i = 0; i < mux->pdata->bus_count; i++) {
|
||||
u32 bus = mux->pdata->base_bus_num ?
|
||||
(mux->pdata->base_bus_num + i) : 0;
|
||||
|
||||
mux->busses[i] = i2c_add_mux_adapter(mux->parent, &pdev->dev,
|
||||
mux, bus, i,
|
||||
i2c_mux_pinctrl_select,
|
||||
deselect);
|
||||
if (!mux->busses[i]) {
|
||||
ret = -ENODEV;
|
||||
dev_err(&pdev->dev, "Failed to add adapter %d\n", i);
|
||||
goto err_del_adapter;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err_del_adapter:
|
||||
for (; i > 0; i--)
|
||||
i2c_del_mux_adapter(mux->busses[i - 1]);
|
||||
i2c_put_adapter(mux->parent);
|
||||
err:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit i2c_mux_pinctrl_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct i2c_mux_pinctrl *mux = platform_get_drvdata(pdev);
|
||||
int i;
|
||||
|
||||
for (i = 0; i < mux->pdata->bus_count; i++)
|
||||
i2c_del_mux_adapter(mux->busses[i]);
|
||||
|
||||
i2c_put_adapter(mux->parent);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id i2c_mux_pinctrl_of_match[] __devinitconst = {
|
||||
{ .compatible = "i2c-mux-pinctrl", },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, i2c_mux_pinctrl_of_match);
|
||||
#endif
|
||||
|
||||
static struct platform_driver i2c_mux_pinctrl_driver = {
|
||||
.driver = {
|
||||
.name = "i2c-mux-pinctrl",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(i2c_mux_pinctrl_of_match),
|
||||
},
|
||||
.probe = i2c_mux_pinctrl_probe,
|
||||
.remove = __devexit_p(i2c_mux_pinctrl_remove),
|
||||
};
|
||||
module_platform_driver(i2c_mux_pinctrl_driver);
|
||||
|
||||
MODULE_DESCRIPTION("pinctrl-based I2C multiplexer driver");
|
||||
MODULE_AUTHOR("Stephen Warren <swarren@nvidia.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_ALIAS("platform:i2c-mux-pinctrl");
|
||||
41
include/linux/i2c-mux-pinctrl.h
Normal file
41
include/linux/i2c-mux-pinctrl.h
Normal file
@ -0,0 +1,41 @@
|
||||
/*
|
||||
* i2c-mux-pinctrl platform data
|
||||
*
|
||||
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
* version 2, as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef _LINUX_I2C_MUX_PINCTRL_H
|
||||
#define _LINUX_I2C_MUX_PINCTRL_H
|
||||
|
||||
/**
|
||||
* struct i2c_mux_pinctrl_platform_data - Platform data for i2c-mux-pinctrl
|
||||
* @parent_bus_num: Parent I2C bus number
|
||||
* @base_bus_num: Base I2C bus number for the child busses. 0 for dynamic.
|
||||
* @bus_count: Number of child busses. Also the number of elements in
|
||||
* @pinctrl_states
|
||||
* @pinctrl_states: The names of the pinctrl state to select for each child bus
|
||||
* @pinctrl_state_idle: The pinctrl state to select when no child bus is being
|
||||
* accessed. If NULL, the most recently used pinctrl state will be left
|
||||
* selected.
|
||||
*/
|
||||
struct i2c_mux_pinctrl_platform_data {
|
||||
int parent_bus_num;
|
||||
int base_bus_num;
|
||||
int bus_count;
|
||||
const char **pinctrl_states;
|
||||
const char *pinctrl_state_idle;
|
||||
};
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user