mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 20:48:49 +08:00
[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEvents
Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Andrew Victor
Russell King
parent
11aadac4f6
commit
ad48ce74f7
@ -12,18 +12,28 @@ config ARCH_AT91RM9200
|
||||
|
||||
config ARCH_AT91SAM9260
|
||||
bool "AT91SAM9260 or AT91SAM9XE"
|
||||
select GENERIC_TIME
|
||||
select GENERIC_CLOCKEVENTS
|
||||
|
||||
config ARCH_AT91SAM9261
|
||||
bool "AT91SAM9261"
|
||||
select GENERIC_TIME
|
||||
select GENERIC_CLOCKEVENTS
|
||||
|
||||
config ARCH_AT91SAM9263
|
||||
bool "AT91SAM9263"
|
||||
select GENERIC_TIME
|
||||
select GENERIC_CLOCKEVENTS
|
||||
|
||||
config ARCH_AT91SAM9RL
|
||||
bool "AT91SAM9RL"
|
||||
select GENERIC_TIME
|
||||
select GENERIC_CLOCKEVENTS
|
||||
|
||||
config ARCH_AT91CAP9
|
||||
bool "AT91CAP9"
|
||||
select GENERIC_TIME
|
||||
select GENERIC_CLOCKEVENTS
|
||||
|
||||
config ARCH_AT91X40
|
||||
bool "AT91x40"
|
||||
|
||||
@ -1,23 +1,20 @@
|
||||
/*
|
||||
* linux/arch/arm/mach-at91/at91sam926x_time.c
|
||||
* at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x
|
||||
*
|
||||
* Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
|
||||
* Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
|
||||
* Converted to ClockSource/ClockEvents by David Brownell.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/time.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/clockchips.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/mach/time.h>
|
||||
|
||||
#include <asm/arch/at91_pit.h>
|
||||
@ -26,85 +23,167 @@
|
||||
#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
|
||||
#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)
|
||||
|
||||
static u32 pit_cycle; /* write-once */
|
||||
static u32 pit_cnt; /* access only w/system irq blocked */
|
||||
|
||||
|
||||
/*
|
||||
* Returns number of microseconds since last timer interrupt. Note that interrupts
|
||||
* will have been disabled by do_gettimeofday()
|
||||
* 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
|
||||
* Clocksource: just a monotonic counter of MCK/16 cycles.
|
||||
* We don't care whether or not PIT irqs are enabled.
|
||||
*/
|
||||
static unsigned long at91sam926x_gettimeoffset(void)
|
||||
static cycle_t read_pit_clk(void)
|
||||
{
|
||||
unsigned long elapsed;
|
||||
unsigned long t = at91_sys_read(AT91_PIT_PIIR);
|
||||
unsigned long flags;
|
||||
u32 elapsed;
|
||||
u32 t;
|
||||
|
||||
elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
|
||||
raw_local_irq_save(flags);
|
||||
elapsed = pit_cnt;
|
||||
t = at91_sys_read(AT91_PIT_PIIR);
|
||||
raw_local_irq_restore(flags);
|
||||
|
||||
return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
|
||||
elapsed += PIT_PICNT(t) * pit_cycle;
|
||||
elapsed += PIT_CPIV(t);
|
||||
return elapsed;
|
||||
}
|
||||
|
||||
static struct clocksource pit_clk = {
|
||||
.name = "pit",
|
||||
.rating = 175,
|
||||
.read = read_pit_clk,
|
||||
.shift = 20,
|
||||
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16)
|
||||
*/
|
||||
static void
|
||||
pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
switch (mode) {
|
||||
case CLOCK_EVT_MODE_PERIODIC:
|
||||
/* update clocksource counter, then enable the IRQ */
|
||||
raw_local_irq_save(flags);
|
||||
pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
|
||||
at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
|
||||
| AT91_PIT_PITIEN);
|
||||
raw_local_irq_restore(flags);
|
||||
break;
|
||||
case CLOCK_EVT_MODE_ONESHOT:
|
||||
BUG();
|
||||
/* FALLTHROUGH */
|
||||
case CLOCK_EVT_MODE_SHUTDOWN:
|
||||
case CLOCK_EVT_MODE_UNUSED:
|
||||
/* disable irq, leaving the clocksource active */
|
||||
at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
|
||||
break;
|
||||
case CLOCK_EVT_MODE_RESUME:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static struct clock_event_device pit_clkevt = {
|
||||
.name = "pit",
|
||||
.features = CLOCK_EVT_FEAT_PERIODIC,
|
||||
.shift = 32,
|
||||
.rating = 100,
|
||||
.cpumask = CPU_MASK_CPU0,
|
||||
.set_mode = pit_clkevt_mode,
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* IRQ handler for the timer.
|
||||
*/
|
||||
static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
|
||||
static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
volatile long nr_ticks;
|
||||
|
||||
if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */
|
||||
/* Get number to ticks performed before interrupt and clear PIT interrupt */
|
||||
/* The PIT interrupt may be disabled, and is shared */
|
||||
if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
|
||||
&& (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
|
||||
unsigned nr_ticks;
|
||||
|
||||
/* Get number of ticks performed before irq, and ack it */
|
||||
nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
|
||||
do {
|
||||
timer_tick();
|
||||
pit_cnt += pit_cycle;
|
||||
pit_clkevt.event_handler(&pit_clkevt);
|
||||
nr_ticks--;
|
||||
} while (nr_ticks);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
} else
|
||||
return IRQ_NONE; /* not handled */
|
||||
}
|
||||
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
static struct irqaction at91sam926x_timer_irq = {
|
||||
static struct irqaction at91sam926x_pit_irq = {
|
||||
.name = "at91_tick",
|
||||
.flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
||||
.handler = at91sam926x_timer_interrupt
|
||||
.handler = at91sam926x_pit_interrupt
|
||||
};
|
||||
|
||||
void at91sam926x_timer_reset(void)
|
||||
static void at91sam926x_pit_reset(void)
|
||||
{
|
||||
/* Disable timer */
|
||||
/* Disable timer and irqs */
|
||||
at91_sys_write(AT91_PIT_MR, 0);
|
||||
|
||||
/* Clear any pending interrupts */
|
||||
(void) at91_sys_read(AT91_PIT_PIVR);
|
||||
/* Clear any pending interrupts, wait for PIT to stop counting */
|
||||
while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0)
|
||||
cpu_relax();
|
||||
|
||||
/* Set Period Interval timer and enable its interrupt */
|
||||
at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
|
||||
/* Start PIT but don't enable IRQ */
|
||||
at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
|
||||
}
|
||||
|
||||
/*
|
||||
* Set up timer interrupt.
|
||||
* Set up both clocksource and clockevent support.
|
||||
*/
|
||||
void __init at91sam926x_timer_init(void)
|
||||
static void __init at91sam926x_pit_init(void)
|
||||
{
|
||||
/* Initialize and enable the timer */
|
||||
at91sam926x_timer_reset();
|
||||
unsigned long pit_rate;
|
||||
unsigned bits;
|
||||
|
||||
/* Make IRQs happen for the system timer. */
|
||||
setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
|
||||
/*
|
||||
* Use our actual MCK to figure out how many MCK/16 ticks per
|
||||
* 1/HZ period (instead of a compile-time constant LATCH).
|
||||
*/
|
||||
pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16;
|
||||
pit_cycle = (pit_rate + HZ/2) / HZ;
|
||||
WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
|
||||
|
||||
/* Initialize and enable the timer */
|
||||
at91sam926x_pit_reset();
|
||||
|
||||
/*
|
||||
* Register clocksource. The high order bits of PIV are unused,
|
||||
* so this isn't a 32-bit counter unless we get clockevent irqs.
|
||||
*/
|
||||
pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift);
|
||||
bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */;
|
||||
pit_clk.mask = CLOCKSOURCE_MASK(bits);
|
||||
clocksource_register(&pit_clk);
|
||||
|
||||
/* Set up irq handler */
|
||||
setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq);
|
||||
|
||||
/* Set up and register clockevents */
|
||||
pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
|
||||
clockevents_register_device(&pit_clkevt);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static void at91sam926x_timer_suspend(void)
|
||||
static void at91sam926x_pit_suspend(void)
|
||||
{
|
||||
/* Disable timer */
|
||||
at91_sys_write(AT91_PIT_MR, 0);
|
||||
}
|
||||
#else
|
||||
#define at91sam926x_timer_suspend NULL
|
||||
#endif
|
||||
|
||||
struct sys_timer at91sam926x_timer = {
|
||||
.init = at91sam926x_timer_init,
|
||||
.offset = at91sam926x_gettimeoffset,
|
||||
.suspend = at91sam926x_timer_suspend,
|
||||
.resume = at91sam926x_timer_reset,
|
||||
.init = at91sam926x_pit_init,
|
||||
.suspend = at91sam926x_pit_suspend,
|
||||
.resume = at91sam926x_pit_reset,
|
||||
};
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user