Merge branch 'for-3.15/hid-core-ll-transport-cleanup' into for-linus

Conflicts: drivers/hid/hid-ids.h drivers/hid/hid-sony.c drivers/hid/i2c-hid/i2c-hid.c
2024-11-11 12:28:41 +08:00 · 2014-04-01 19:05:09 +02:00 · 2014-04-01 19:05:09 +02:00 · ad295b6d57
commit ad295b6d57
parent ba04a57b4a c3d77fab51
21 changed files with 2386 additions and 444 deletions
--- a/Documentation/hid/hid-transport.txt
+++ b/Documentation/hid/hid-transport.txt
@ -0,0 +1,317 @@
+                          HID I/O Transport Drivers
+                         ===========================
+
+The HID subsystem is independent of the underlying transport driver. Initially,
+only USB was supported, but other specifications adopted the HID design and
+provided new transport drivers. The kernel includes at least support for USB,
+Bluetooth, I2C and user-space I/O drivers.
+
+1) HID Bus
+==========
+
+The HID subsystem is designed as a bus. Any I/O subsystem may provide HID
+devices and register them with the HID bus. HID core then loads generic device
+drivers on top of it. The transport drivers are responsible of raw data
+transport and device setup/management. HID core is responsible of
+report-parsing, report interpretation and the user-space API. Device specifics
+and quirks are handled by all layers depending on the quirk.
+
+ +-----------+  +-----------+            +-----------+  +-----------+
+ | Device #1 |  | Device #i |            | Device #j |  | Device #k |
+ +-----------+  +-----------+            +-----------+  +-----------+
+          \\      //                              \\      //
+        +------------+                          +------------+
+        | I/O Driver |                          | I/O Driver |
+        +------------+                          +------------+
+              ||                                      ||
+     +------------------+                    +------------------+
+     | Transport Driver |                    | Transport Driver |
+     +------------------+                    +------------------+
+                       \___                ___/
+                           \              /
+                          +----------------+
+                          |    HID Core    |
+                          +----------------+
+                           /  |        |  \
+                          /   |        |   \
+             ____________/    |        |    \_________________
+            /                 |        |                      \
+           /                  |        |                       \
+ +----------------+  +-----------+  +------------------+  +------------------+
+ | Generic Driver |  | MT Driver |  | Custom Driver #1 |  | Custom Driver #2 |
+ +----------------+  +-----------+  +------------------+  +------------------+
+
+Example Drivers:
+  I/O: USB, I2C, Bluetooth-l2cap
+  Transport: USB-HID, I2C-HID, BT-HIDP
+
+Everything below "HID Core" is simplified in this graph as it is only of
+interest to HID device drivers. Transport drivers do not need to know the
+specifics.
+
+1.1) Device Setup
+-----------------
+
+I/O drivers normally provide hotplug detection or device enumeration APIs to the
+transport drivers. Transport drivers use this to find any suitable HID device.
+They allocate HID device objects and register them with HID core. Transport
+drivers are not required to register themselves with HID core. HID core is never
+aware of which transport drivers are available and is not interested in it. It
+is only interested in devices.
+
+Transport drivers attach a constant "struct hid_ll_driver" object with each
+device. Once a device is registered with HID core, the callbacks provided via
+this struct are used by HID core to communicate with the device.
+
+Transport drivers are responsible of detecting device failures and unplugging.
+HID core will operate a device as long as it is registered regardless of any
+device failures. Once transport drivers detect unplug or failure events, they
+must unregister the device from HID core and HID core will stop using the
+provided callbacks.
+
+1.2) Transport Driver Requirements
+----------------------------------
+
+The terms "asynchronous" and "synchronous" in this document describe the
+transmission behavior regarding acknowledgements. An asynchronous channel must
+not perform any synchronous operations like waiting for acknowledgements or
+verifications. Generally, HID calls operating on asynchronous channels must be
+running in atomic-context just fine.
+On the other hand, synchronous channels can be implemented by the transport
+driver in whatever way they like. They might just be the same as asynchronous
+channels, but they can also provide acknowledgement reports, automatic
+retransmission on failure, etc. in a blocking manner. If such functionality is
+required on asynchronous channels, a transport-driver must implement that via
+its own worker threads.
+
+HID core requires transport drivers to follow a given design. A Transport
+driver must provide two bi-directional I/O channels to each HID device. These
+channels must not necessarily be bi-directional in the hardware itself. A
+transport driver might just provide 4 uni-directional channels. Or it might
+multiplex all four on a single physical channel. However, in this document we
+will describe them as two bi-directional channels as they have several
+properties in common.
+
+ - Interrupt Channel (intr): The intr channel is used for asynchronous data
+   reports. No management commands or data acknowledgements are sent on this
+   channel. Any unrequested incoming or outgoing data report must be sent on
+   this channel and is never acknowledged by the remote side. Devices usually
+   send their input events on this channel. Outgoing events are normally
+   not send via intr, except if high throughput is required.
+ - Control Channel (ctrl): The ctrl channel is used for synchronous requests and
+   device management. Unrequested data input events must not be sent on this
+   channel and are normally ignored. Instead, devices only send management
+   events or answers to host requests on this channel.
+   The control-channel is used for direct blocking queries to the device
+   independent of any events on the intr-channel.
+   Outgoing reports are usually sent on the ctrl channel via synchronous
+   SET_REPORT requests.
+
+Communication between devices and HID core is mostly done via HID reports. A
+report can be of one of three types:
+
+ - INPUT Report: Input reports provide data from device to host. This
+   data may include button events, axis events, battery status or more. This
+   data is generated by the device and sent to the host with or without
+   requiring explicit requests. Devices can choose to send data continuously or
+   only on change.
+ - OUTPUT Report: Output reports change device states. They are sent from host
+   to device and may include LED requests, rumble requests or more. Output
+   reports are never sent from device to host, but a host can retrieve their
+   current state.
+   Hosts may choose to send output reports either continuously or only on
+   change.
+ - FEATURE Report: Feature reports are used for specific static device features
+   and never reported spontaneously. A host can read and/or write them to access
+   data like battery-state or device-settings.
+   Feature reports are never sent without requests. A host must explicitly set
+   or retrieve a feature report. This also means, feature reports are never sent
+   on the intr channel as this channel is asynchronous.
+
+INPUT and OUTPUT reports can be sent as pure data reports on the intr channel.
+For INPUT reports this is the usual operational mode. But for OUTPUT reports,
+this is rarely done as OUTPUT reports are normally quite scarce. But devices are
+free to make excessive use of asynchronous OUTPUT reports (for instance, custom
+HID audio speakers make great use of it).
+
+Plain reports must not be sent on the ctrl channel, though. Instead, the ctrl
+channel provides synchronous GET/SET_REPORT requests. Plain reports are only
+allowed on the intr channel and are the only means of data there.
+
+ - GET_REPORT: A GET_REPORT request has a report ID as payload and is sent
+   from host to device. The device must answer with a data report for the
+   requested report ID on the ctrl channel as a synchronous acknowledgement.
+   Only one GET_REPORT request can be pending for each device. This restriction
+   is enforced by HID core as several transport drivers don't allow multiple
+   simultaneous GET_REPORT requests.
+   Note that data reports which are sent as answer to a GET_REPORT request are
+   not handled as generic device events. That is, if a device does not operate
+   in continuous data reporting mode, an answer to GET_REPORT does not replace
+   the raw data report on the intr channel on state change.
+   GET_REPORT is only used by custom HID device drivers to query device state.
+   Normally, HID core caches any device state so this request is not necessary
+   on devices that follow the HID specs except during device initialization to
+   retrieve the current state.
+   GET_REPORT requests can be sent for any of the 3 report types and shall
+   return the current report state of the device. However, OUTPUT reports as
+   payload may be blocked by the underlying transport driver if the
+   specification does not allow them.
+ - SET_REPORT: A SET_REPORT request has a report ID plus data as payload. It is
+   sent from host to device and a device must update it's current report state
+   according to the given data. Any of the 3 report types can be used. However,
+   INPUT reports as payload might be blocked by the underlying transport driver
+   if the specification does not allow them.
+   A device must answer with a synchronous acknowledgement. However, HID core
+   does not require transport drivers to forward this acknowledgement to HID
+   core.
+   Same as for GET_REPORT, only one SET_REPORT can be pending at a time. This
+   restriction is enforced by HID core as some transport drivers do not support
+   multiple synchronous SET_REPORT requests.
+
+Other ctrl-channel requests are supported by USB-HID but are not available
+(or deprecated) in most other transport level specifications:
+
+ - GET/SET_IDLE: Only used by USB-HID and I2C-HID.
+ - GET/SET_PROTOCOL: Not used by HID core.
+ - RESET: Used by I2C-HID, not hooked up in HID core.
+ - SET_POWER: Used by I2C-HID, not hooked up in HID core.
+
+2) HID API
+==========
+
+2.1) Initialization
+-------------------
+
+Transport drivers normally use the following procedure to register a new device
+with HID core:
+
+	struct hid_device *hid;
+	int ret;
+
+	hid = hid_allocate_device();
+	if (IS_ERR(hid)) {
+		ret = PTR_ERR(hid);
+		goto err_<...>;
+	}
+
+	strlcpy(hid->name, <device-name-src>, 127);
+	strlcpy(hid->phys, <device-phys-src>, 63);
+	strlcpy(hid->uniq, <device-uniq-src>, 63);
+
+	hid->ll_driver = &custom_ll_driver;
+	hid->bus = <device-bus>;
+	hid->vendor = <device-vendor>;
+	hid->product = <device-product>;
+	hid->version = <device-version>;
+	hid->country = <device-country>;
+	hid->dev.parent = <pointer-to-parent-device>;
+	hid->driver_data = <transport-driver-data-field>;
+
+	ret = hid_add_device(hid);
+	if (ret)
+		goto err_<...>;
+
+Once hid_add_device() is entered, HID core might use the callbacks provided in
+"custom_ll_driver". Note that fields like "country" can be ignored by underlying
+transport-drivers if not supported.
+
+To unregister a device, use:
+
+	hid_destroy_device(hid);
+
+Once hid_destroy_device() returns, HID core will no longer make use of any
+driver callbacks.
+
+2.2) hid_ll_driver operations
+-----------------------------
+
+The available HID callbacks are:
+ - int (*start) (struct hid_device *hdev)
+   Called from HID device drivers once they want to use the device. Transport
+   drivers can choose to setup their device in this callback. However, normally
+   devices are already set up before transport drivers register them to HID core
+   so this is mostly only used by USB-HID.
+
+ - void (*stop) (struct hid_device *hdev)
+   Called from HID device drivers once they are done with a device. Transport
+   drivers can free any buffers and deinitialize the device. But note that
+   ->start() might be called again if another HID device driver is loaded on the
+   device.
+   Transport drivers are free to ignore it and deinitialize devices after they
+   destroyed them via hid_destroy_device().
+
+ - int (*open) (struct hid_device *hdev)
+   Called from HID device drivers once they are interested in data reports.
+   Usually, while user-space didn't open any input API/etc., device drivers are
+   not interested in device data and transport drivers can put devices asleep.
+   However, once ->open() is called, transport drivers must be ready for I/O.
+   ->open() calls are nested for each client that opens the HID device.
+
+ - void (*close) (struct hid_device *hdev)
+   Called from HID device drivers after ->open() was called but they are no
+   longer interested in device reports. (Usually if user-space closed any input
+   devices of the driver).
+   Transport drivers can put devices asleep and terminate any I/O of all
+   ->open() calls have been followed by a ->close() call. However, ->start() may
+   be called again if the device driver is interested in input reports again.
+
+ - int (*parse) (struct hid_device *hdev)
+   Called once during device setup after ->start() has been called. Transport
+   drivers must read the HID report-descriptor from the device and tell HID core
+   about it via hid_parse_report().
+
+ - int (*power) (struct hid_device *hdev, int level)
+   Called by HID core to give PM hints to transport drivers. Usually this is
+   analogical to the ->open() and ->close() hints and redundant.
+
+ - void (*request) (struct hid_device *hdev, struct hid_report *report,
+                    int reqtype)
+   Send an HID request on the ctrl channel. "report" contains the report that
+   should be sent and "reqtype" the request type. Request-type can be
+   HID_REQ_SET_REPORT or HID_REQ_GET_REPORT.
+   This callback is optional. If not provided, HID core will assemble a raw
+   report following the HID specs and send it via the ->raw_request() callback.
+   The transport driver is free to implement this asynchronously.
+
+ - int (*wait) (struct hid_device *hdev)
+   Used by HID core before calling ->request() again. A transport driver can use
+   it to wait for any pending requests to complete if only one request is
+   allowed at a time.
+
+ - int (*raw_request) (struct hid_device *hdev, unsigned char reportnum,
+                       __u8 *buf, size_t count, unsigned char rtype,
+                       int reqtype)
+   Same as ->request() but provides the report as raw buffer. This request shall
+   be synchronous. A transport driver must not use ->wait() to complete such
+   requests. This request is mandatory and hid core will reject the device if
+   it is missing.
+
+ - int (*output_report) (struct hid_device *hdev, __u8 *buf, size_t len)
+   Send raw output report via intr channel. Used by some HID device drivers
+   which require high throughput for outgoing requests on the intr channel. This
+   must not cause SET_REPORT calls! This must be implemented as asynchronous
+   output report on the intr channel!
+
+ - int (*idle) (struct hid_device *hdev, int report, int idle, int reqtype)
+   Perform SET/GET_IDLE request. Only used by USB-HID, do not implement!
+
+2.3) Data Path
+--------------
+
+Transport drivers are responsible of reading data from I/O devices. They must
+handle any I/O-related state-tracking themselves. HID core does not implement
+protocol handshakes or other management commands which can be required by the
+given HID transport specification.
+
+Every raw data packet read from a device must be fed into HID core via
+hid_input_report(). You must specify the channel-type (intr or ctrl) and report
+type (input/output/feature). Under normal conditions, only input reports are
+provided via this API.
+
+Responses to GET_REPORT requests via ->request() must also be provided via this
+API. Responses to ->raw_request() are synchronous and must be intercepted by the
+transport driver and not passed to hid_input_report().
+Acknowledgements to SET_REPORT requests are not of interest to HID core.
+
+----------------------------------------------------
+Written 2013, David Herrmann <dh.herrmann@gmail.com>
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@ -175,6 +175,15 @@ config HID_PRODIKEYS
 	  multimedia keyboard, but will lack support for the musical keyboard
 	  and some additional multimedia keys.

+config HID_CP2112
+	tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
+	depends on USB_HID && I2C && GPIOLIB
+	---help---
+	Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
+	This is a HID device driver which registers as an i2c adapter
+	and gpiochip to expose these functions of the CP2112. The
+	customizable USB descriptor fields are exposed as sysfs attributes.
+
 config HID_CYPRESS
 	tristate "Cypress mouse and barcode readers" if EXPERT
 	depends on HID
@ -608,25 +617,27 @@ config HID_SAMSUNG
 	Support for Samsung InfraRed remote control or keyboards.

 config HID_SONY
-	tristate "Sony PS2/3 accessories"
+	tristate "Sony PS2/3/4 accessories"
 	depends on USB_HID
 	depends on NEW_LEDS
 	depends on LEDS_CLASS
+	select POWER_SUPPLY
 	---help---
 	Support for

 	  * Sony PS3 6-axis controllers
+	  * Sony PS4 DualShock 4 controllers
 	  * Buzz controllers
 	  * Sony PS3 Blue-ray Disk Remote Control (Bluetooth)
 	  * Logitech Harmony adapter for Sony Playstation 3 (Bluetooth)

 config SONY_FF
-	bool "Sony PS2/3 accessories force feedback support"
+	bool "Sony PS2/3/4 accessories force feedback support" 
 	depends on HID_SONY
 	select INPUT_FF_MEMLESS
 	---help---
-	Say Y here if you have a Sony PS2/3 accessory and want to enable force
-	feedback support for it.
+	Say Y here if you have a Sony PS2/3/4 accessory and want to enable
+	force feedback support for it.

 config HID_SPEEDLINK
 	tristate "Speedlink VAD Cezanne mouse support"
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@ -41,6 +41,7 @@ obj-$(CONFIG_HID_AUREAL)        += hid-aureal.o
 obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
 obj-$(CONFIG_HID_CHERRY)	+= hid-cherry.o
 obj-$(CONFIG_HID_CHICONY)	+= hid-chicony.o
+obj-$(CONFIG_HID_CP2112)	+= hid-cp2112.o
 obj-$(CONFIG_HID_CYPRESS)	+= hid-cypress.o
 obj-$(CONFIG_HID_DRAGONRISE)	+= hid-dr.o
 obj-$(CONFIG_HID_EMS_FF)	+= hid-emsff.o
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@ -1248,6 +1248,11 @@ void hid_output_report(struct hid_report *report, __u8 *data)
 }
 EXPORT_SYMBOL_GPL(hid_output_report);

+static int hid_report_len(struct hid_report *report)
+{
+	return ((report->size - 1) >> 3) + 1 + (report->id > 0) + 7;
+}
+
 /*
 * Allocator for buffer that is going to be passed to hid_output_report()
 */
@ -1258,7 +1263,7 @@ u8 *hid_alloc_report_buf(struct hid_report *report, gfp_t flags)
 	 * of implement() working on 8 byte chunks
 	 */

-	int len = ((report->size - 1) >> 3) + 1 + (report->id > 0) + 7;
+	int len = hid_report_len(report);

 	return kmalloc(len, flags);
 }
@ -1314,6 +1319,41 @@ static struct hid_report *hid_get_report(struct hid_report_enum *report_enum,
 	return report;
 }

+/*
+ * Implement a generic .request() callback, using .raw_request()
+ * DO NOT USE in hid drivers directly, but through hid_hw_request instead.
+ */
+void __hid_request(struct hid_device *hid, struct hid_report *report,
+		int reqtype)
+{
+	char *buf;
+	int ret;
+	int len;
+
+	buf = hid_alloc_report_buf(report, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	len = hid_report_len(report);
+
+	if (reqtype == HID_REQ_SET_REPORT)
+		hid_output_report(report, buf);
+
+	ret = hid->ll_driver->raw_request(hid, report->id, buf, len,
+					  report->type, reqtype);
+	if (ret < 0) {
+		dbg_hid("unable to complete request: %d\n", ret);
+		goto out;
+	}
+
+	if (reqtype == HID_REQ_GET_REPORT)
+		hid_input_report(hid, report->type, buf, ret, 0);
+
+out:
+	kfree(buf);
+}
+EXPORT_SYMBOL_GPL(__hid_request);
+
 int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
 		int interrupt)
 {
@ -1693,6 +1733,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) },
@ -2431,6 +2472,14 @@ int hid_add_device(struct hid_device *hdev)
 	if (hid_ignore(hdev))
 		return -ENODEV;

+	/*
+	 * Check for the mandatory transport channel.
+	 */
+	 if (!hdev->ll_driver->raw_request) {
+		hid_err(hdev, "transport driver missing .raw_request()\n");
+		return -EINVAL;
+	 }
+
 	/*
 	 * Read the device report descriptor once and use as template
 	 * for the driver-specific modifications.
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
--- a/drivers/hid/hid-hyperv.c
+++ b/drivers/hid/hid-hyperv.c
@ -460,12 +460,22 @@ static void mousevsc_hid_stop(struct hid_device *hid)
 {
 }

+static int mousevsc_hid_raw_request(struct hid_device *hid,
+				    unsigned char report_num,
+				    __u8 *buf, size_t len,
+				    unsigned char rtype,
+				    int reqtype)
+{
+	return 0;
+}
+
 static struct hid_ll_driver mousevsc_ll_driver = {
 	.parse = mousevsc_hid_parse,
 	.open = mousevsc_hid_open,
 	.close = mousevsc_hid_close,
 	.start = mousevsc_hid_start,
 	.stop = mousevsc_hid_stop,
+	.raw_request = mousevsc_hid_raw_request,
 };

 static struct hid_driver mousevsc_hid_driver;
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@ -242,6 +242,7 @@
 #define USB_VENDOR_ID_CYGNAL		0x10c4
 #define USB_DEVICE_ID_CYGNAL_RADIO_SI470X	0x818a
 #define USB_DEVICE_ID_FOCALTECH_FTXXXX_MULTITOUCH	0x81b9
+#define USB_DEVICE_ID_CYGNAL_CP2112	0xea90

 #define USB_VENDOR_ID_CYPRESS		0x04b4
 #define USB_DEVICE_ID_CYPRESS_MOUSE	0x0001
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@ -350,9 +350,9 @@ static int hidinput_get_battery_property(struct power_supply *psy,
 			ret = -ENOMEM;
 			break;
 		}
-		ret = dev->hid_get_raw_report(dev, dev->battery_report_id,
-					      buf, 2,
-					      dev->battery_report_type);
+		ret = hid_hw_raw_request(dev, dev->battery_report_id, buf, 2,
+					 dev->battery_report_type,
+					 HID_REQ_GET_REPORT);

 		if (ret != 2) {
 			ret = -ENODATA;
@ -1150,7 +1150,7 @@ static void hidinput_led_worker(struct work_struct *work)
 					      led_work);
 	struct hid_field *field;
 	struct hid_report *report;
-	int len;
+	int len, ret;
 	__u8 *buf;

 	field = hidinput_get_led_field(hid);
@ -1184,7 +1184,10 @@ static void hidinput_led_worker(struct work_struct *work)

 	hid_output_report(report, buf);
 	/* synchronous output report */
-	hid->hid_output_raw_report(hid, buf, len, HID_OUTPUT_REPORT);
+	ret = hid_hw_output_report(hid, buf, len);
+	if (ret == -ENOSYS)
+		hid_hw_raw_request(hid, report->id, buf, len, HID_OUTPUT_REPORT,
+				HID_REQ_SET_REPORT);
 	kfree(buf);
 }

@ -1263,10 +1266,7 @@ static struct hid_input *hidinput_allocate(struct hid_device *hid)
 	}

 	input_set_drvdata(input_dev, hid);
-	if (hid->ll_driver->hidinput_input_event)
-		input_dev->event = hid->ll_driver->hidinput_input_event;
-	else if (hid->ll_driver->request || hid->hid_output_raw_report)
-		input_dev->event = hidinput_input_event;
+	input_dev->event = hidinput_input_event;
 	input_dev->open = hidinput_open;
 	input_dev->close = hidinput_close;
 	input_dev->setkeycode = hidinput_setkeycode;
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@ -692,7 +692,8 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	if (hdev->product == USB_DEVICE_ID_LOGITECH_WII_WHEEL) {
 		unsigned char buf[] = { 0x00, 0xAF,  0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };

-		ret = hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
+		ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);

 		if (ret >= 0) {
 			/* insert a little delay of 10 jiffies ~ 40ms */
@ -704,7 +705,8 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
 			buf[1] = 0xB2;
 			get_random_bytes(&buf[2], 2);

-			ret = hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
+			ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 		}
 	}

--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@ -44,14 +44,6 @@ static const char kbd_descriptor[] = {
 	0x19, 0xE0,		/*   USAGE_MINIMUM (Left Control)   */
 	0x29, 0xE7,		/*   USAGE_MAXIMUM (Right GUI)      */
 	0x81, 0x02,		/*   INPUT (Data,Var,Abs)       */
-	0x95, 0x05,		/*   REPORT COUNT (5)           */
-	0x05, 0x08,		/*   USAGE PAGE (LED page)      */
-	0x19, 0x01,		/*   USAGE MINIMUM (1)          */
-	0x29, 0x05,		/*   USAGE MAXIMUM (5)          */
-	0x91, 0x02,		/*   OUTPUT (Data, Variable, Absolute)  */
-	0x95, 0x01,		/*   REPORT COUNT (1)           */
-	0x75, 0x03,		/*   REPORT SIZE (3)            */
-	0x91, 0x01,		/*   OUTPUT (Constant)          */
 	0x95, 0x06,		/*   REPORT_COUNT (6)           */
 	0x75, 0x08,		/*   REPORT_SIZE (8)            */
 	0x15, 0x00,		/*   LOGICAL_MINIMUM (0)        */
@ -60,6 +52,18 @@ static const char kbd_descriptor[] = {
 	0x19, 0x00,		/*   USAGE_MINIMUM (no event)       */
 	0x2A, 0xFF, 0x00,	/*   USAGE_MAXIMUM (reserved)       */
 	0x81, 0x00,		/*   INPUT (Data,Ary,Abs)       */
+	0x85, 0x0e,		/* REPORT_ID (14)               */
+	0x05, 0x08,		/*   USAGE PAGE (LED page)      */
+	0x95, 0x05,		/*   REPORT COUNT (5)           */
+	0x75, 0x01,		/*   REPORT SIZE (1)            */
+	0x15, 0x00,		/*   LOGICAL_MINIMUM (0)        */
+	0x25, 0x01,		/*   LOGICAL_MAXIMUM (1)        */
+	0x19, 0x01,		/*   USAGE MINIMUM (1)          */
+	0x29, 0x05,		/*   USAGE MAXIMUM (5)          */
+	0x91, 0x02,		/*   OUTPUT (Data, Variable, Absolute)  */
+	0x95, 0x01,		/*   REPORT COUNT (1)           */
+	0x75, 0x03,		/*   REPORT SIZE (3)            */
+	0x91, 0x01,		/*   OUTPUT (Constant)          */
 	0xC0
 };

@ -189,9 +193,6 @@ static const u8 hid_reportid_size_map[NUMBER_OF_HID_REPORTS] = {

 static struct hid_ll_driver logi_dj_ll_driver;

-static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
-					size_t count,
-					unsigned char report_type);
 static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev);

 static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev,
@ -258,7 +259,6 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
 	}

 	dj_hiddev->ll_driver = &logi_dj_ll_driver;
-	dj_hiddev->hid_output_raw_report = logi_dj_output_hidraw_report;

 	dj_hiddev->dev.parent = &djrcv_hdev->dev;
 	dj_hiddev->bus = BUS_USB;
@ -540,14 +540,35 @@ static void logi_dj_ll_close(struct hid_device *hid)
 	dbg_hid("%s:%s\n", __func__, hid->phys);
 }

-static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
-					size_t count,
-					unsigned char report_type)
+static int logi_dj_ll_raw_request(struct hid_device *hid,
+				  unsigned char reportnum, __u8 *buf,
+				  size_t count, unsigned char report_type,
+				  int reqtype)
 {
-	/* Called by hid raw to send data */
-	dbg_hid("%s\n", __func__);
+	struct dj_device *djdev = hid->driver_data;
+	struct dj_receiver_dev *djrcv_dev = djdev->dj_receiver_dev;
+	u8 *out_buf;
+	int ret;

-	return 0;
+	if (buf[0] != REPORT_TYPE_LEDS)
+		return -EINVAL;
+
+	out_buf = kzalloc(DJREPORT_SHORT_LENGTH, GFP_ATOMIC);
+	if (!out_buf)
+		return -ENOMEM;
+
+	if (count < DJREPORT_SHORT_LENGTH - 2)
+		count = DJREPORT_SHORT_LENGTH - 2;
+
+	out_buf[0] = REPORT_ID_DJ_SHORT;
+	out_buf[1] = djdev->device_index;
+	memcpy(out_buf + 2, buf, count);
+
+	ret = hid_hw_raw_request(djrcv_dev->hdev, out_buf[0], out_buf,
+		DJREPORT_SHORT_LENGTH, report_type, reqtype);
+
+	kfree(out_buf);
+	return ret;
 }

 static void rdcat(char *rdesc, unsigned int *rsize, const char *data, unsigned int size)
@ -613,58 +634,6 @@ static int logi_dj_ll_parse(struct hid_device *hid)
 	return retval;
 }

-static int logi_dj_ll_input_event(struct input_dev *dev, unsigned int type,
-				  unsigned int code, int value)
-{
-	/* Sent by the input layer to handle leds and Force Feedback */
-	struct hid_device *dj_hiddev = input_get_drvdata(dev);
-	struct dj_device *dj_dev = dj_hiddev->driver_data;
-
-	struct dj_receiver_dev *djrcv_dev =
-	    dev_get_drvdata(dj_hiddev->dev.parent);
-	struct hid_device *dj_rcv_hiddev = djrcv_dev->hdev;
-	struct hid_report_enum *output_report_enum;
-
-	struct hid_field *field;
-	struct hid_report *report;
-	unsigned char *data;
-	int offset;
-
-	dbg_hid("%s: %s, type:%d | code:%d | value:%d\n",
-		__func__, dev->phys, type, code, value);
-
-	if (type != EV_LED)
-		return -1;
-
-	offset = hidinput_find_field(dj_hiddev, type, code, &field);
-
-	if (offset == -1) {
-		dev_warn(&dev->dev, "event field not found\n");
-		return -1;
-	}
-	hid_set_field(field, offset, value);
-
-	data = hid_alloc_report_buf(field->report, GFP_ATOMIC);
-	if (!data) {
-		dev_warn(&dev->dev, "failed to allocate report buf memory\n");
-		return -1;
-	}
-
-	hid_output_report(field->report, &data[0]);
-
-	output_report_enum = &dj_rcv_hiddev->report_enum[HID_OUTPUT_REPORT];
-	report = output_report_enum->report_id_hash[REPORT_ID_DJ_SHORT];
-	hid_set_field(report->field[0], 0, dj_dev->device_index);
-	hid_set_field(report->field[0], 1, REPORT_TYPE_LEDS);
-	hid_set_field(report->field[0], 2, data[1]);
-
-	hid_hw_request(dj_rcv_hiddev, report, HID_REQ_SET_REPORT);
-
-	kfree(data);
-
-	return 0;
-}
-
 static int logi_dj_ll_start(struct hid_device *hid)
 {
 	dbg_hid("%s\n", __func__);
@ -683,7 +652,7 @@ static struct hid_ll_driver logi_dj_ll_driver = {
 	.stop = logi_dj_ll_stop,
 	.open = logi_dj_ll_open,
 	.close = logi_dj_ll_close,
-	.hidinput_input_event = logi_dj_ll_input_event,
+	.raw_request = logi_dj_ll_raw_request,
 };


--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@ -538,8 +538,8 @@ static int magicmouse_probe(struct hid_device *hdev,
 	 * but there seems to be no other way of switching the mode.
 	 * Thus the super-ugly hacky success check below.
 	 */
-	ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature),
-			HID_FEATURE_REPORT);
+	ret = hid_hw_raw_request(hdev, feature[0], feature, sizeof(feature),
+				HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 	if (ret != -EIO && ret != sizeof(feature)) {
 		hid_err(hdev, "unable to request touch data (%d)\n", ret);
 		goto err_stop_hw;
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
--- a/drivers/hid/hid-thingm.c
+++ b/drivers/hid/hid-thingm.c
@ -48,8 +48,8 @@ static int blink1_send_command(struct blink1_data *data,
 			buf[0], buf[1], buf[2], buf[3], buf[4],
 			buf[5], buf[6], buf[7], buf[8]);

-	ret = data->hdev->hid_output_raw_report(data->hdev, buf,
-			BLINK1_CMD_SIZE, HID_FEATURE_REPORT);
+	ret = hid_hw_raw_request(data->hdev, buf[0], buf, BLINK1_CMD_SIZE,
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);

 	return ret < 0 ? ret : 0;
 }
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@ -128,8 +128,8 @@ static void wacom_set_image(struct hid_device *hdev, const char *image,

 	rep_data[0] = WAC_CMD_ICON_START_STOP;
 	rep_data[1] = 0;
-	ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
-				HID_FEATURE_REPORT);
+	ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 	if (ret < 0)
 		goto err;

@ -143,15 +143,15 @@ static void wacom_set_image(struct hid_device *hdev, const char *image,
 			rep_data[j + 3] = p[(i << 6) + j];

 		rep_data[2] = i;
-		ret = hdev->hid_output_raw_report(hdev, rep_data, 67,
-					HID_FEATURE_REPORT);
+		ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 67,
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 	}

 	rep_data[0] = WAC_CMD_ICON_START_STOP;
 	rep_data[1] = 0;

-	ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
-				HID_FEATURE_REPORT);
+	ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);

 err:
 	return;
@ -183,7 +183,8 @@ static void wacom_leds_set_brightness(struct led_classdev *led_dev,
 		buf[3] = value;
 		/* use fixed brightness for OLEDs */
 		buf[4] = 0x08;
-		hdev->hid_output_raw_report(hdev, buf, 9, HID_FEATURE_REPORT);
+		hid_hw_raw_request(hdev, buf[0], buf, 9, HID_FEATURE_REPORT,
+				   HID_REQ_SET_REPORT);
 		kfree(buf);
 	}

@ -339,8 +340,8 @@ static void wacom_set_features(struct hid_device *hdev, u8 speed)
 		rep_data[0] = 0x03 ; rep_data[1] = 0x00;
 		limit = 3;
 		do {
-			ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
-					HID_FEATURE_REPORT);
+			ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 		} while (ret < 0 && limit-- > 0);

 		if (ret >= 0) {
@ -352,8 +353,9 @@ static void wacom_set_features(struct hid_device *hdev, u8 speed)
 			rep_data[1] = 0x00;
 			limit = 3;
 			do {
-				ret = hdev->hid_output_raw_report(hdev,
-					rep_data, 2, HID_FEATURE_REPORT);
+				ret = hid_hw_raw_request(hdev, rep_data[0],
+					rep_data, 2, HID_FEATURE_REPORT,
+					HID_REQ_SET_REPORT);
 			} while (ret < 0 && limit-- > 0);

 			if (ret >= 0) {
@ -378,8 +380,8 @@ static void wacom_set_features(struct hid_device *hdev, u8 speed)
 		rep_data[0] = 0x03;
 		rep_data[1] = wdata->features;

-		ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
-					HID_FEATURE_REPORT);
+		ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
+				HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 		if (ret >= 0)
 			wdata->high_speed = speed;
 		break;
--- a/drivers/hid/hid-wiimote-core.c
+++ b/drivers/hid/hid-wiimote-core.c
@ -28,14 +28,14 @@ static int wiimote_hid_send(struct hid_device *hdev, __u8 *buffer,
 	__u8 *buf;
 	int ret;

-	if (!hdev->hid_output_raw_report)
+	if (!hdev->ll_driver->output_report)
 		return -ENODEV;

 	buf = kmemdup(buffer, count, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;

-	ret = hdev->hid_output_raw_report(hdev, buf, count, HID_OUTPUT_REPORT);
+	ret = hid_hw_output_report(hdev, buf, count);

 	kfree(buf);
 	return ret;
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@ -123,10 +123,6 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,

 	dev = hidraw_table[minor]->hid;

-	if (!dev->hid_output_raw_report) {
-		ret = -ENODEV;
-		goto out;
-	}

 	if (count > HID_MAX_BUFFER_SIZE) {
 		hid_warn(dev, "pid %d passed too large report\n",
@ -153,7 +149,21 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
 		goto out_free;
 	}

-	ret = dev->hid_output_raw_report(dev, buf, count, report_type);
+	if ((report_type == HID_OUTPUT_REPORT) &&
+	    !(dev->quirks & HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP)) {
+		ret = hid_hw_output_report(dev, buf, count);
+		/*
+		 * compatibility with old implementation of USB-HID and I2C-HID:
+		 * if the device does not support receiving output reports,
+		 * on an interrupt endpoint, fallback to SET_REPORT HID command.
+		 */
+		if (ret != -ENOSYS)
+			goto out_free;
+	}
+
+	ret = hid_hw_raw_request(dev, buf[0], buf, count, report_type,
+				HID_REQ_SET_REPORT);
+
 out_free:
 	kfree(buf);
 out:
@ -189,7 +199,7 @@ static ssize_t hidraw_get_report(struct file *file, char __user *buffer, size_t

 	dev = hidraw_table[minor]->hid;

-	if (!dev->hid_get_raw_report) {
+	if (!dev->ll_driver->raw_request) {
 		ret = -ENODEV;
 		goto out;
 	}
@ -216,14 +226,15 @@ static ssize_t hidraw_get_report(struct file *file, char __user *buffer, size_t

 	/*
 	 * Read the first byte from the user. This is the report number,
-	 * which is passed to dev->hid_get_raw_report().
+	 * which is passed to hid_hw_raw_request().
 	 */
 	if (copy_from_user(&report_number, buffer, 1)) {
 		ret = -EFAULT;
 		goto out_free;
 	}

-	ret = dev->hid_get_raw_report(dev, report_number, buf, count, report_type);
+	ret = hid_hw_raw_request(dev, report_number, buf, count, report_type,
+				 HID_REQ_GET_REPORT);

 	if (ret < 0)
 		goto out_free;
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@ -257,18 +257,27 @@ static int i2c_hid_get_report(struct i2c_client *client, u8 reportType,
 	return 0;
 }

-static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
-		u8 reportID, unsigned char *buf, size_t data_len)
+/**
+ * i2c_hid_set_or_send_report: forward an incoming report to the device
+ * @client: the i2c_client of the device
+ * @reportType: 0x03 for HID_FEATURE_REPORT ; 0x02 for HID_OUTPUT_REPORT
+ * @reportID: the report ID
+ * @buf: the actual data to transfer, without the report ID
+ * @len: size of buf
+ * @use_data: true: use SET_REPORT HID command, false: send plain OUTPUT report
+ */
+static int i2c_hid_set_or_send_report(struct i2c_client *client, u8 reportType,
+		u8 reportID, unsigned char *buf, size_t data_len, bool use_data)
 {
 	struct i2c_hid *ihid = i2c_get_clientdata(client);
 	u8 *args = ihid->argsbuf;
-	const struct i2c_hid_cmd * hidcmd = &hid_set_report_cmd;
+	const struct i2c_hid_cmd *hidcmd;
 	int ret;
 	u16 dataRegister = le16_to_cpu(ihid->hdesc.wDataRegister);
 	u16 outputRegister = le16_to_cpu(ihid->hdesc.wOutputRegister);
 	u16 maxOutputLength = le16_to_cpu(ihid->hdesc.wMaxOutputLength);

-	/* hidraw already checked that data_len < HID_MAX_BUFFER_SIZE */
+	/* hid_hw_* already checked that data_len < HID_MAX_BUFFER_SIZE */
 	u16 size =	2			/* size */ +
 			(reportID ? 1 : 0)	/* reportID */ +
 			data_len		/* buf */;
@ -279,6 +288,9 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,

 	i2c_hid_dbg(ihid, "%s\n", __func__);

+	if (!use_data && maxOutputLength == 0)
+		return -ENOSYS;
+
 	if (reportID >= 0x0F) {
 		args[index++] = reportID;
 		reportID = 0x0F;
@ -288,9 +300,10 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
 	 * use the data register for feature reports or if the device does not
 	 * support the output register
 	 */
-	if (reportType == 0x03 || maxOutputLength == 0) {
+	if (use_data) {
 		args[index++] = dataRegister & 0xFF;
 		args[index++] = dataRegister >> 8;
+		hidcmd = &hid_set_report_cmd;
 	} else {
 		args[index++] = outputRegister & 0xFF;
 		args[index++] = outputRegister >> 8;
@ -559,7 +572,7 @@ static int i2c_hid_get_raw_report(struct hid_device *hid,
 }

 static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
-		size_t count, unsigned char report_type)
+		size_t count, unsigned char report_type, bool use_data)
 {
 	struct i2c_client *client = hid->driver_data;
 	int report_id = buf[0];
@ -573,9 +586,9 @@ static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
 		count--;
 	}

-	ret = i2c_hid_set_report(client,
+	ret = i2c_hid_set_or_send_report(client,
 				report_type == HID_FEATURE_REPORT ? 0x03 : 0x02,
-				report_id, buf, count);
+				report_id, buf, count, use_data);

 	if (report_id && ret >= 0)
 		ret++; /* add report_id to the number of transfered bytes */
@ -583,34 +596,27 @@ static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
 	return ret;
 }

-static void i2c_hid_request(struct hid_device *hid, struct hid_report *rep,
-		int reqtype)
+static int i2c_hid_output_report(struct hid_device *hid, __u8 *buf,
+		size_t count)
 {
-	struct i2c_client *client = hid->driver_data;
-	char *buf;
-	int ret;
-	int len = i2c_hid_get_report_length(rep) - 2;
-
-	buf = hid_alloc_report_buf(rep, GFP_KERNEL);
-	if (!buf)
-		return;
+	return i2c_hid_output_raw_report(hid, buf, count, HID_OUTPUT_REPORT,
+			false);
+}

+static int i2c_hid_raw_request(struct hid_device *hid, unsigned char reportnum,
+			       __u8 *buf, size_t len, unsigned char rtype,
+			       int reqtype)
+{
 	switch (reqtype) {
 	case HID_REQ_GET_REPORT:
-		ret = i2c_hid_get_raw_report(hid, rep->id, buf, len, rep->type);
-		if (ret < 0)
-			dev_err(&client->dev, "%s: unable to get report: %d\n",
-				__func__, ret);
-		else
-			hid_input_report(hid, rep->type, buf, ret, 0);
-		break;
+		return i2c_hid_get_raw_report(hid, reportnum, buf, len, rtype);
 	case HID_REQ_SET_REPORT:
-		hid_output_report(rep, buf);
-		i2c_hid_output_raw_report(hid, buf, len, rep->type);
-		break;
+		if (buf[0] != reportnum)
+			return -EINVAL;
+		return i2c_hid_output_raw_report(hid, buf, len, rtype, true);
+	default:
+		return -EIO;
 	}
-
-	kfree(buf);
 }

 static int i2c_hid_parse(struct hid_device *hid)
@ -768,7 +774,8 @@ static struct hid_ll_driver i2c_hid_ll_driver = {
 	.open = i2c_hid_open,
 	.close = i2c_hid_close,
 	.power = i2c_hid_power,
-	.request = i2c_hid_request,
+	.output_report = i2c_hid_output_report,
+	.raw_request = i2c_hid_raw_request,
 };

 static int i2c_hid_init_irq(struct i2c_client *client)
@ -1017,8 +1024,6 @@ static int i2c_hid_probe(struct i2c_client *client,

 	hid->driver_data = client;
 	hid->ll_driver = &i2c_hid_ll_driver;
-	hid->hid_get_raw_report = i2c_hid_get_raw_report;
-	hid->hid_output_raw_report = i2c_hid_output_raw_report;
 	hid->dev.parent = &client->dev;
 	ACPI_COMPANION_SET(&hid->dev, ACPI_COMPANION(&client->dev));
 	hid->bus = BUS_I2C;
--- a/drivers/hid/uhid.c
+++ b/drivers/hid/uhid.c
@ -247,27 +247,22 @@ static int uhid_hid_output_raw(struct hid_device *hid, __u8 *buf, size_t count,
 static int uhid_hid_output_report(struct hid_device *hid, __u8 *buf,
 				  size_t count)
 {
-	struct uhid_device *uhid = hid->driver_data;
-	unsigned long flags;
-	struct uhid_event *ev;
+	return uhid_hid_output_raw(hid, buf, count, HID_OUTPUT_REPORT);
+}

-	if (count < 1 || count > UHID_DATA_MAX)
-		return -EINVAL;
-
-	ev = kzalloc(sizeof(*ev), GFP_KERNEL);
-	if (!ev)
-		return -ENOMEM;
-
-	ev->type = UHID_OUTPUT;
-	ev->u.output.size = count;
-	ev->u.output.rtype = UHID_OUTPUT_REPORT;
-	memcpy(ev->u.output.data, buf, count);
-
-	spin_lock_irqsave(&uhid->qlock, flags);
-	uhid_queue(uhid, ev);
-	spin_unlock_irqrestore(&uhid->qlock, flags);
-
-	return count;
+static int uhid_raw_request(struct hid_device *hid, unsigned char reportnum,
+			    __u8 *buf, size_t len, unsigned char rtype,
+			    int reqtype)
+{
+	switch (reqtype) {
+	case HID_REQ_GET_REPORT:
+		return uhid_hid_get_raw(hid, reportnum, buf, len, rtype);
+	case HID_REQ_SET_REPORT:
+		/* TODO: implement proper SET_REPORT functionality */
+		return -ENOSYS;
+	default:
+		return -EIO;
+	}
 }

 static struct hid_ll_driver uhid_hid_driver = {
@ -277,6 +272,7 @@ static struct hid_ll_driver uhid_hid_driver = {
 	.close = uhid_hid_close,
 	.parse = uhid_hid_parse,
 	.output_report = uhid_hid_output_report,
+	.raw_request = uhid_raw_request,
 };

 #ifdef CONFIG_COMPAT
@ -404,8 +400,6 @@ static int uhid_dev_create(struct uhid_device *uhid,
 	hid->uniq[63] = 0;

 	hid->ll_driver = &uhid_hid_driver;
-	hid->hid_get_raw_report = uhid_hid_get_raw;
-	hid->hid_output_raw_report = uhid_hid_output_raw;
 	hid->bus = ev->u.create.bus;
 	hid->vendor = ev->u.create.vendor;
 	hid->product = ev->u.create.product;
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@ -894,7 +894,12 @@ static int usbhid_set_raw_report(struct hid_device *hid, unsigned int reportnum,
 	int ret, skipped_report_id = 0;

 	/* Byte 0 is the report number. Report data starts at byte 1.*/
-	buf[0] = reportnum;
+	if ((rtype == HID_OUTPUT_REPORT) &&
+	    (hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORT_ID))
+		buf[0] = 0;
+	else
+		buf[0] = reportnum;
+
 	if (buf[0] == 0x0) {
 		/* Don't send the Report ID */
 		buf++;
@ -915,59 +920,6 @@ static int usbhid_set_raw_report(struct hid_device *hid, unsigned int reportnum,
 	return ret;
 }

-
-static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count,
-		unsigned char report_type)
-{
-	struct usbhid_device *usbhid = hid->driver_data;
-	struct usb_device *dev = hid_to_usb_dev(hid);
-	struct usb_interface *intf = usbhid->intf;
-	struct usb_host_interface *interface = intf->cur_altsetting;
-	int ret;
-
-	if (usbhid->urbout && report_type != HID_FEATURE_REPORT) {
-		int actual_length;
-		int skipped_report_id = 0;
-
-		if (buf[0] == 0x0) {
-			/* Don't send the Report ID */
-			buf++;
-			count--;
-			skipped_report_id = 1;
-		}
-		ret = usb_interrupt_msg(dev, usbhid->urbout->pipe,
-			buf, count, &actual_length,
-			USB_CTRL_SET_TIMEOUT);
-		/* return the number of bytes transferred */
-		if (ret == 0) {
-			ret = actual_length;
-			/* count also the report id */
-			if (skipped_report_id)
-				ret++;
-		}
-	} else {
-		int skipped_report_id = 0;
-		int report_id = buf[0];
-		if (buf[0] == 0x0) {
-			/* Don't send the Report ID */
-			buf++;
-			count--;
-			skipped_report_id = 1;
-		}
-		ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-			HID_REQ_SET_REPORT,
-			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-			((report_type + 1) << 8) | report_id,
-			interface->desc.bInterfaceNumber, buf, count,
-			USB_CTRL_SET_TIMEOUT);
-		/* count also the report id, if this was a numbered report. */
-		if (ret > 0 && skipped_report_id)
-			ret++;
-	}
-
-	return ret;
-}
-
 static int usbhid_output_report(struct hid_device *hid, __u8 *buf, size_t count)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
@ -975,7 +927,7 @@ static int usbhid_output_report(struct hid_device *hid, __u8 *buf, size_t count)
 	int actual_length, skipped_report_id = 0, ret;

 	if (!usbhid->urbout)
-		return -EIO;
+		return -ENOSYS;

 	if (buf[0] == 0x0) {
 		/* Don't send the Report ID */
@ -1331,8 +1283,6 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *

 	usb_set_intfdata(intf, hid);
 	hid->ll_driver = &usb_hid_driver;
-	hid->hid_get_raw_report = usbhid_get_raw_report;
-	hid->hid_output_raw_report = usbhid_output_raw_report;
 	hid->ff_init = hid_pidff_init;
 #ifdef CONFIG_USB_HIDDEV
 	hid->hiddev_connect = hiddev_connect;
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@ -287,6 +287,8 @@ struct hid_item {
 #define HID_QUIRK_NO_EMPTY_INPUT		0x00000100
 #define HID_QUIRK_NO_INIT_INPUT_REPORTS		0x00000200
 #define HID_QUIRK_SKIP_OUTPUT_REPORTS		0x00010000
+#define HID_QUIRK_SKIP_OUTPUT_REPORT_ID		0x00020000
+#define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP	0x00040000
 #define HID_QUIRK_FULLSPEED_INTERVAL		0x10000000
 #define HID_QUIRK_NO_INIT_REPORTS		0x20000000
 #define HID_QUIRK_NO_IGNORE			0x40000000
@ -508,12 +510,6 @@ struct hid_device {							/* device report descriptor */
 				  struct hid_usage *, __s32);
 	void (*hiddev_report_event) (struct hid_device *, struct hid_report *);

-	/* handler for raw input (Get_Report) data, used by hidraw */
-	int (*hid_get_raw_report) (struct hid_device *, unsigned char, __u8 *, size_t, unsigned char);
-
-	/* handler for raw output data, used by hidraw */
-	int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char);
-
 	/* debugging support via debugfs */
 	unsigned short debug;
 	struct dentry *debug_dir;
@ -675,11 +671,12 @@ struct hid_driver {
 * @stop: called on remove
 * @open: called by input layer on open
 * @close: called by input layer on close
- * @hidinput_input_event: event input event (e.g. ff or leds)
 * @parse: this method is called only once to parse the device data,
 *	   shouldn't allocate anything to not leak memory
 * @request: send report request to device (e.g. feature report)
 * @wait: wait for buffered io to complete (send/recv reports)
+ * @raw_request: send raw report request to device (e.g. feature report)
+ * @output_report: send output report to device
 * @idle: send idle request to device
 */
 struct hid_ll_driver {
@ -691,9 +688,6 @@ struct hid_ll_driver {

 	int (*power)(struct hid_device *hdev, int level);

-	int (*hidinput_input_event) (struct input_dev *idev, unsigned int type,
-			unsigned int code, int value);
-
 	int (*parse)(struct hid_device *hdev);

 	void (*request)(struct hid_device *hdev,
@ -758,6 +752,7 @@ struct hid_field *hidinput_get_led_field(struct hid_device *hid);
 unsigned int hidinput_count_leds(struct hid_device *hid);
 __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code);
 void hid_output_report(struct hid_report *report, __u8 *data);
+void __hid_request(struct hid_device *hid, struct hid_report *rep, int reqtype);
 u8 *hid_alloc_report_buf(struct hid_report *report, gfp_t flags);
 struct hid_device *hid_allocate_device(void);
 struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
@ -970,7 +965,55 @@ static inline void hid_hw_request(struct hid_device *hdev,
 				  struct hid_report *report, int reqtype)
 {
 	if (hdev->ll_driver->request)
-		hdev->ll_driver->request(hdev, report, reqtype);
+		return hdev->ll_driver->request(hdev, report, reqtype);
+
+	__hid_request(hdev, report, reqtype);
+}
+
+/**
+ * hid_hw_raw_request - send report request to device
+ *
+ * @hdev: hid device
+ * @reportnum: report ID
+ * @buf: in/out data to transfer
+ * @len: length of buf
+ * @rtype: HID report type
+ * @reqtype: HID_REQ_GET_REPORT or HID_REQ_SET_REPORT
+ *
+ * @return: count of data transfered, negative if error
+ *
+ * Same behavior as hid_hw_request, but with raw buffers instead.
+ */
+static inline int hid_hw_raw_request(struct hid_device *hdev,
+				  unsigned char reportnum, __u8 *buf,
+				  size_t len, unsigned char rtype, int reqtype)
+{
+	if (len < 1 || len > HID_MAX_BUFFER_SIZE || !buf)
+		return -EINVAL;
+
+	return hdev->ll_driver->raw_request(hdev, reportnum, buf, len,
+						    rtype, reqtype);
+}
+
+/**
+ * hid_hw_output_report - send output report to device
+ *
+ * @hdev: hid device
+ * @buf: raw data to transfer
+ * @len: length of buf
+ *
+ * @return: count of data transfered, negative if error
+ */
+static inline int hid_hw_output_report(struct hid_device *hdev, __u8 *buf,
+					size_t len)
+{
+	if (len < 1 || len > HID_MAX_BUFFER_SIZE || !buf)
+		return -EINVAL;
+
+	if (hdev->ll_driver->output_report)
+		return hdev->ll_driver->output_report(hdev, buf, len);
+
+	return -ENOSYS;
 }

 /**
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@ -223,51 +223,6 @@ static void hidp_input_report(struct hidp_session *session, struct sk_buff *skb)
 	input_sync(dev);
 }

-static int hidp_send_report(struct hidp_session *session, struct hid_report *report)
-{
-	unsigned char hdr;
-	u8 *buf;
-	int rsize, ret;
-
-	buf = hid_alloc_report_buf(report, GFP_ATOMIC);
-	if (!buf)
-		return -EIO;
-
-	hid_output_report(report, buf);
-	hdr = HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT;
-
-	rsize = ((report->size - 1) >> 3) + 1 + (report->id > 0);
-	ret = hidp_send_intr_message(session, hdr, buf, rsize);
-
-	kfree(buf);
-	return ret;
-}
-
-static int hidp_hidinput_event(struct input_dev *dev, unsigned int type,
-			       unsigned int code, int value)
-{
-	struct hid_device *hid = input_get_drvdata(dev);
-	struct hidp_session *session = hid->driver_data;
-	struct hid_field *field;
-	int offset;
-
-	BT_DBG("session %p type %d code %d value %d",
-	       session, type, code, value);
-
-	if (type != EV_LED)
-		return -1;
-
-	offset = hidinput_find_field(hid, type, code, &field);
-	if (offset == -1) {
-		hid_warn(dev, "event field not found\n");
-		return -1;
-	}
-
-	hid_set_field(field, offset, value);
-
-	return hidp_send_report(session, field->report);
-}
-
 static int hidp_get_raw_report(struct hid_device *hid,
 		unsigned char report_number,
 		unsigned char *data, size_t count,
@ -418,62 +373,13 @@ err:
 	return ret;
 }

-static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count,
-		unsigned char report_type)
+static int hidp_output_report(struct hid_device *hid, __u8 *data, size_t count)
 {
 	struct hidp_session *session = hid->driver_data;
-	int ret;

-	if (report_type == HID_OUTPUT_REPORT) {
-		report_type = HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT;
-		return hidp_send_intr_message(session, report_type,
-					      data, count);
-	} else if (report_type != HID_FEATURE_REPORT) {
-		return -EINVAL;
-	}
-
-	if (mutex_lock_interruptible(&session->report_mutex))
-		return -ERESTARTSYS;
-
-	/* Set up our wait, and send the report request to the device. */
-	set_bit(HIDP_WAITING_FOR_SEND_ACK, &session->flags);
-	report_type = HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE;
-	ret = hidp_send_ctrl_message(session, report_type, data, count);
-	if (ret)
-		goto err;
-
-	/* Wait for the ACK from the device. */
-	while (test_bit(HIDP_WAITING_FOR_SEND_ACK, &session->flags) &&
-	       !atomic_read(&session->terminate)) {
-		int res;
-
-		res = wait_event_interruptible_timeout(session->report_queue,
-			!test_bit(HIDP_WAITING_FOR_SEND_ACK, &session->flags)
-				|| atomic_read(&session->terminate),
-			10*HZ);
-		if (res == 0) {
-			/* timeout */
-			ret = -EIO;
-			goto err;
-		}
-		if (res < 0) {
-			/* signal */
-			ret = -ERESTARTSYS;
-			goto err;
-		}
-	}
-
-	if (!session->output_report_success) {
-		ret = -EIO;
-		goto err;
-	}
-
-	ret = count;
-
-err:
-	clear_bit(HIDP_WAITING_FOR_SEND_ACK, &session->flags);
-	mutex_unlock(&session->report_mutex);
-	return ret;
+	return hidp_send_intr_message(session,
+				      HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT,
+				      data, count);
 }

 static int hidp_raw_request(struct hid_device *hid, unsigned char reportnum,
@ -490,15 +396,6 @@ static int hidp_raw_request(struct hid_device *hid, unsigned char reportnum,
 	}
 }

-static int hidp_output_report(struct hid_device *hid, __u8 *data, size_t count)
-{
-	struct hidp_session *session = hid->driver_data;
-
-	return hidp_send_intr_message(session,
-				      HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT,
-				      data, count);
-}
-
 static void hidp_idle_timeout(unsigned long arg)
 {
 	struct hidp_session *session = (struct hidp_session *) arg;
@ -829,7 +726,6 @@ static struct hid_ll_driver hidp_hid_driver = {
 	.close = hidp_close,
 	.raw_request = hidp_raw_request,
 	.output_report = hidp_output_report,
-	.hidinput_input_event = hidp_hidinput_event,
 };

 /* This function sets up the hid device. It does not add it
@ -871,15 +767,15 @@ static int hidp_setup_hid(struct hidp_session *session,
 	snprintf(hid->phys, sizeof(hid->phys), "%pMR",
 		 &l2cap_pi(session->ctrl_sock->sk)->chan->src);

+	/* NOTE: Some device modules depend on the dst address being stored in
+	 * uniq. Please be aware of this before making changes to this behavior.
+	 */
 	snprintf(hid->uniq, sizeof(hid->uniq), "%pMR",
 		 &l2cap_pi(session->ctrl_sock->sk)->chan->dst);

 	hid->dev.parent = &session->conn->hcon->dev;
 	hid->ll_driver = &hidp_hid_driver;

-	hid->hid_get_raw_report = hidp_get_raw_report;
-	hid->hid_output_raw_report = hidp_output_raw_report;
-
 	/* True if device is blacklisted in drivers/hid/hid-core.c */
 	if (hid_ignore(hid)) {
 		hid_destroy_device(session->hid);