diff --git a/Documentation/filesystems/afs.txt b/Documentation/filesystems/afs.txt index 12ad6c7f4e50..ffef91c4e0d6 100644 --- a/Documentation/filesystems/afs.txt +++ b/Documentation/filesystems/afs.txt @@ -23,16 +23,14 @@ it does support include: (*) Security (currently only AFS kaserver and KerberosIV tickets). - (*) File reading. + (*) File reading and writing. (*) Automounting. + (*) Local caching (via fscache). + It does not yet support the following AFS features: - (*) Write support. - - (*) Local caching. - (*) pioctl() system call. @@ -56,7 +54,7 @@ They permit the debugging messages to be turned on dynamically by manipulating the masks in the following files: /sys/module/af_rxrpc/parameters/debug - /sys/module/afs/parameters/debug + /sys/module/kafs/parameters/debug ===== @@ -66,9 +64,9 @@ USAGE When inserting the driver modules the root cell must be specified along with a list of volume location server IP addresses: - insmod af_rxrpc.o - insmod rxkad.o - insmod kafs.o rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91 + modprobe af_rxrpc + modprobe rxkad + modprobe kafs rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91 The first module is the AF_RXRPC network protocol driver. This provides the RxRPC remote operation protocol and may also be accessed from userspace. See: @@ -81,7 +79,7 @@ is the actual filesystem driver for the AFS filesystem. Once the module has been loaded, more modules can be added by the following procedure: - echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells + echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells Where the parameters to the "add" command are the name of a cell and a list of volume location servers within that cell, with the latter separated by colons. @@ -101,7 +99,7 @@ The name of the volume can be suffixes with ".backup" or ".readonly" to specify connection to only volumes of those types. The name of the cell is optional, and if not given during a mount, then the -named volume will be looked up in the cell specified during insmod. +named volume will be looked up in the cell specified during modprobe. Additional cells can be added through /proc (see later section). @@ -163,14 +161,14 @@ THE CELL DATABASE The filesystem maintains an internal database of all the cells it knows and the IP addresses of the volume location servers for those cells. The cell to which -the system belongs is added to the database when insmod is performed by the +the system belongs is added to the database when modprobe is performed by the "rootcell=" argument or, if compiled in, using a "kafs.rootcell=" argument on the kernel command line. Further cells can be added by commands similar to the following: echo add CELLNAME VLADDR[:VLADDR][:VLADDR]... >/proc/fs/afs/cells - echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells + echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells No other cell database operations are available at this time. @@ -233,7 +231,7 @@ insmod /tmp/kafs.o rootcell=cambridge.redhat.com:172.16.18.91 mount -t afs \%root.afs. /afs mount -t afs \%cambridge.redhat.com:root.cell. /afs/cambridge.redhat.com/ -echo add grand.central.org 18.7.14.88:128.2.191.224 > /proc/fs/afs/cells +echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 > /proc/fs/afs/cells mount -t afs "#grand.central.org:root.cell." /afs/grand.central.org/ mount -t afs "#grand.central.org:root.archive." /afs/grand.central.org/archive mount -t afs "#grand.central.org:root.contrib." /afs/grand.central.org/contrib diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index fad18f9456e4..ffead13f9443 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1167,13 +1167,11 @@ CHAPTER 3: PER-PROCESS PARAMETERS 3.1 /proc//oom_adj - Adjust the oom-killer score ------------------------------------------------------ -This file can be used to adjust the score used to select which processes should -be killed in an out-of-memory situation. The oom_adj value is a characteristic -of the task's mm, so all threads that share an mm with pid will have the same -oom_adj value. A high value will increase the likelihood of this process being -killed by the oom-killer. Valid values are in the range -16 to +15 as -explained below and a special value of -17, which disables oom-killing -altogether for threads sharing pid's mm. +This file can be used to adjust the score used to select which processes +should be killed in an out-of-memory situation. Giving it a high score will +increase the likelihood of this process being killed by the oom-killer. Valid +values are in the range -16 to +15, plus the special value -17, which disables +oom-killing altogether for this process. The process to be killed in an out-of-memory situation is selected among all others based on its badness score. This value equals the original memory size of the process @@ -1187,9 +1185,6 @@ the parent's score if they do not share the same memory. Thus forking servers are the prime candidates to be killed. Having only one 'hungry' child will make parent less preferable than the child. -/proc//oom_adj cannot be changed for kthreads since they are immune from -oom-killing already. - /proc//oom_score shows process' current badness score. The following heuristics are then applied: diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt new file mode 100644 index 000000000000..f49a33b704d2 --- /dev/null +++ b/Documentation/power/runtime_pm.txt @@ -0,0 +1,378 @@ +Run-time Power Management Framework for I/O Devices + +(C) 2009 Rafael J. Wysocki , Novell Inc. + +1. Introduction + +Support for run-time power management (run-time PM) of I/O devices is provided +at the power management core (PM core) level by means of: + +* The power management workqueue pm_wq in which bus types and device drivers can + put their PM-related work items. It is strongly recommended that pm_wq be + used for queuing all work items related to run-time PM, because this allows + them to be synchronized with system-wide power transitions (suspend to RAM, + hibernation and resume from system sleep states). pm_wq is declared in + include/linux/pm_runtime.h and defined in kernel/power/main.c. + +* A number of run-time PM fields in the 'power' member of 'struct device' (which + is of the type 'struct dev_pm_info', defined in include/linux/pm.h) that can + be used for synchronizing run-time PM operations with one another. + +* Three device run-time PM callbacks in 'struct dev_pm_ops' (defined in + include/linux/pm.h). + +* A set of helper functions defined in drivers/base/power/runtime.c that can be + used for carrying out run-time PM operations in such a way that the + synchronization between them is taken care of by the PM core. Bus types and + device drivers are encouraged to use these functions. + +The run-time PM callbacks present in 'struct dev_pm_ops', the device run-time PM +fields of 'struct dev_pm_info' and the core helper functions provided for +run-time PM are described below. + +2. Device Run-time PM Callbacks + +There are three device run-time PM callbacks defined in 'struct dev_pm_ops': + +struct dev_pm_ops { + ... + int (*runtime_suspend)(struct device *dev); + int (*runtime_resume)(struct device *dev); + void (*runtime_idle)(struct device *dev); + ... +}; + +The ->runtime_suspend() callback is executed by the PM core for the bus type of +the device being suspended. The bus type's callback is then _entirely_ +_responsible_ for handling the device as appropriate, which may, but need not +include executing the device driver's own ->runtime_suspend() callback (from the +PM core's point of view it is not necessary to implement a ->runtime_suspend() +callback in a device driver as long as the bus type's ->runtime_suspend() knows +what to do to handle the device). + + * Once the bus type's ->runtime_suspend() callback has completed successfully + for given device, the PM core regards the device as suspended, which need + not mean that the device has been put into a low power state. It is + supposed to mean, however, that the device will not process data and will + not communicate with the CPU(s) and RAM until its bus type's + ->runtime_resume() callback is executed for it. The run-time PM status of + a device after successful execution of its bus type's ->runtime_suspend() + callback is 'suspended'. + + * If the bus type's ->runtime_suspend() callback returns -EBUSY or -EAGAIN, + the device's run-time PM status is supposed to be 'active', which means that + the device _must_ be fully operational afterwards. + + * If the bus type's ->runtime_suspend() callback returns an error code + different from -EBUSY or -EAGAIN, the PM core regards this as a fatal + error and will refuse to run the helper functions described in Section 4 + for the device, until the status of it is directly set either to 'active' + or to 'suspended' (the PM core provides special helper functions for this + purpose). + +In particular, if the driver requires remote wakeup capability for proper +functioning and device_may_wakeup() returns 'false' for the device, then +->runtime_suspend() should return -EBUSY. On the other hand, if +device_may_wakeup() returns 'true' for the device and the device is put +into a low power state during the execution of its bus type's +->runtime_suspend(), it is expected that remote wake-up (i.e. hardware mechanism +allowing the device to request a change of its power state, such as PCI PME) +will be enabled for the device. Generally, remote wake-up should be enabled +for all input devices put into a low power state at run time. + +The ->runtime_resume() callback is executed by the PM core for the bus type of +the device being woken up. The bus type's callback is then _entirely_ +_responsible_ for handling the device as appropriate, which may, but need not +include executing the device driver's own ->runtime_resume() callback (from the +PM core's point of view it is not necessary to implement a ->runtime_resume() +callback in a device driver as long as the bus type's ->runtime_resume() knows +what to do to handle the device). + + * Once the bus type's ->runtime_resume() callback has completed successfully, + the PM core regards the device as fully operational, which means that the + device _must_ be able to complete I/O operations as needed. The run-time + PM status of the device is then 'active'. + + * If the bus type's ->runtime_resume() callback returns an error code, the PM + core regards this as a fatal error and will refuse to run the helper + functions described in Section 4 for the device, until its status is + directly set either to 'active' or to 'suspended' (the PM core provides + special helper functions for this purpose). + +The ->runtime_idle() callback is executed by the PM core for the bus type of +given device whenever the device appears to be idle, which is indicated to the +PM core by two counters, the device's usage counter and the counter of 'active' +children of the device. + + * If any of these counters is decreased using a helper function provided by + the PM core and it turns out to be equal to zero, the other counter is + checked. If that counter also is equal to zero, the PM core executes the + device bus type's ->runtime_idle() callback (with the device as an + argument). + +The action performed by a bus type's ->runtime_idle() callback is totally +dependent on the bus type in question, but the expected and recommended action +is to check if the device can be suspended (i.e. if all of the conditions +necessary for suspending the device are satisfied) and to queue up a suspend +request for the device in that case. + +The helper functions provided by the PM core, described in Section 4, guarantee +that the following constraints are met with respect to the bus type's run-time +PM callbacks: + +(1) The callbacks are mutually exclusive (e.g. it is forbidden to execute + ->runtime_suspend() in parallel with ->runtime_resume() or with another + instance of ->runtime_suspend() for the same device) with the exception that + ->runtime_suspend() or ->runtime_resume() can be executed in parallel with + ->runtime_idle() (although ->runtime_idle() will not be started while any + of the other callbacks is being executed for the same device). + +(2) ->runtime_idle() and ->runtime_suspend() can only be executed for 'active' + devices (i.e. the PM core will only execute ->runtime_idle() or + ->runtime_suspend() for the devices the run-time PM status of which is + 'active'). + +(3) ->runtime_idle() and ->runtime_suspend() can only be executed for a device + the usage counter of which is equal to zero _and_ either the counter of + 'active' children of which is equal to zero, or the 'power.ignore_children' + flag of which is set. + +(4) ->runtime_resume() can only be executed for 'suspended' devices (i.e. the + PM core will only execute ->runtime_resume() for the devices the run-time + PM status of which is 'suspended'). + +Additionally, the helper functions provided by the PM core obey the following +rules: + + * If ->runtime_suspend() is about to be executed or there's a pending request + to execute it, ->runtime_idle() will not be executed for the same device. + + * A request to execute or to schedule the execution of ->runtime_suspend() + will cancel any pending requests to execute ->runtime_idle() for the same + device. + + * If ->runtime_resume() is about to be executed or there's a pending request + to execute it, the other callbacks will not be executed for the same device. + + * A request to execute ->runtime_resume() will cancel any pending or + scheduled requests to execute the other callbacks for the same device. + +3. Run-time PM Device Fields + +The following device run-time PM fields are present in 'struct dev_pm_info', as +defined in include/linux/pm.h: + + struct timer_list suspend_timer; + - timer used for scheduling (delayed) suspend request + + unsigned long timer_expires; + - timer expiration time, in jiffies (if this is different from zero, the + timer is running and will expire at that time, otherwise the timer is not + running) + + struct work_struct work; + - work structure used for queuing up requests (i.e. work items in pm_wq) + + wait_queue_head_t wait_queue; + - wait queue used if any of the helper functions needs to wait for another + one to complete + + spinlock_t lock; + - lock used for synchronisation + + atomic_t usage_count; + - the usage counter of the device + + atomic_t child_count; + - the count of 'active' children of the device + + unsigned int ignore_children; + - if set, the value of child_count is ignored (but still updated) + + unsigned int disable_depth; + - used for disabling the helper funcions (they work normally if this is + equal to zero); the initial value of it is 1 (i.e. run-time PM is + initially disabled for all devices) + + unsigned int runtime_error; + - if set, there was a fatal error (one of the callbacks returned error code + as described in Section 2), so the helper funtions will not work until + this flag is cleared; this is the error code returned by the failing + callback + + unsigned int idle_notification; + - if set, ->runtime_idle() is being executed + + unsigned int request_pending; + - if set, there's a pending request (i.e. a work item queued up into pm_wq) + + enum rpm_request request; + - type of request that's pending (valid if request_pending is set) + + unsigned int deferred_resume; + - set if ->runtime_resume() is about to be run while ->runtime_suspend() is + being executed for that device and it is not practical to wait for the + suspend to complete; means "start a resume as soon as you've suspended" + + enum rpm_status runtime_status; + - the run-time PM status of the device; this field's initial value is + RPM_SUSPENDED, which means that each device is initially regarded by the + PM core as 'suspended', regardless of its real hardware status + +All of the above fields are members of the 'power' member of 'struct device'. + +4. Run-time PM Device Helper Functions + +The following run-time PM helper functions are defined in +drivers/base/power/runtime.c and include/linux/pm_runtime.h: + + void pm_runtime_init(struct device *dev); + - initialize the device run-time PM fields in 'struct dev_pm_info' + + void pm_runtime_remove(struct device *dev); + - make sure that the run-time PM of the device will be disabled after + removing the device from device hierarchy + + int pm_runtime_idle(struct device *dev); + - execute ->runtime_idle() for the device's bus type; returns 0 on success + or error code on failure, where -EINPROGRESS means that ->runtime_idle() + is already being executed + + int pm_runtime_suspend(struct device *dev); + - execute ->runtime_suspend() for the device's bus type; returns 0 on + success, 1 if the device's run-time PM status was already 'suspended', or + error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt + to suspend the device again in future + + int pm_runtime_resume(struct device *dev); + - execute ->runtime_resume() for the device's bus type; returns 0 on + success, 1 if the device's run-time PM status was already 'active' or + error code on failure, where -EAGAIN means it may be safe to attempt to + resume the device again in future, but 'power.runtime_error' should be + checked additionally + + int pm_request_idle(struct device *dev); + - submit a request to execute ->runtime_idle() for the device's bus type + (the request is represented by a work item in pm_wq); returns 0 on success + or error code if the request has not been queued up + + int pm_schedule_suspend(struct device *dev, unsigned int delay); + - schedule the execution of ->runtime_suspend() for the device's bus type + in future, where 'delay' is the time to wait before queuing up a suspend + work item in pm_wq, in milliseconds (if 'delay' is zero, the work item is + queued up immediately); returns 0 on success, 1 if the device's PM + run-time status was already 'suspended', or error code if the request + hasn't been scheduled (or queued up if 'delay' is 0); if the execution of + ->runtime_suspend() is already scheduled and not yet expired, the new + value of 'delay' will be used as the time to wait + + int pm_request_resume(struct device *dev); + - submit a request to execute ->runtime_resume() for the device's bus type + (the request is represented by a work item in pm_wq); returns 0 on + success, 1 if the device's run-time PM status was already 'active', or + error code if the request hasn't been queued up + + void pm_runtime_get_noresume(struct device *dev); + - increment the device's usage counter + + int pm_runtime_get(struct device *dev); + - increment the device's usage counter, run pm_request_resume(dev) and + return its result + + int pm_runtime_get_sync(struct device *dev); + - increment the device's usage counter, run pm_runtime_resume(dev) and + return its result + + void pm_runtime_put_noidle(struct device *dev); + - decrement the device's usage counter + + int pm_runtime_put(struct device *dev); + - decrement the device's usage counter, run pm_request_idle(dev) and return + its result + + int pm_runtime_put_sync(struct device *dev); + - decrement the device's usage counter, run pm_runtime_idle(dev) and return + its result + + void pm_runtime_enable(struct device *dev); + - enable the run-time PM helper functions to run the device bus type's + run-time PM callbacks described in Section 2 + + int pm_runtime_disable(struct device *dev); + - prevent the run-time PM helper functions from running the device bus + type's run-time PM callbacks, make sure that all of the pending run-time + PM operations on the device are either completed or canceled; returns + 1 if there was a resume request pending and it was necessary to execute + ->runtime_resume() for the device's bus type to satisfy that request, + otherwise 0 is returned + + void pm_suspend_ignore_children(struct device *dev, bool enable); + - set/unset the power.ignore_children flag of the device + + int pm_runtime_set_active(struct device *dev); + - clear the device's 'power.runtime_error' flag, set the device's run-time + PM status to 'active' and update its parent's counter of 'active' + children as appropriate (it is only valid to use this function if + 'power.runtime_error' is set or 'power.disable_depth' is greater than + zero); it will fail and return error code if the device has a parent + which is not active and the 'power.ignore_children' flag of which is unset + + void pm_runtime_set_suspended(struct device *dev); + - clear the device's 'power.runtime_error' flag, set the device's run-time + PM status to 'suspended' and update its parent's counter of 'active' + children as appropriate (it is only valid to use this function if + 'power.runtime_error' is set or 'power.disable_depth' is greater than + zero) + +It is safe to execute the following helper functions from interrupt context: + +pm_request_idle() +pm_schedule_suspend() +pm_request_resume() +pm_runtime_get_noresume() +pm_runtime_get() +pm_runtime_put_noidle() +pm_runtime_put() +pm_suspend_ignore_children() +pm_runtime_set_active() +pm_runtime_set_suspended() +pm_runtime_enable() + +5. Run-time PM Initialization, Device Probing and Removal + +Initially, the run-time PM is disabled for all devices, which means that the +majority of the run-time PM helper funtions described in Section 4 will return +-EAGAIN until pm_runtime_enable() is called for the device. + +In addition to that, the initial run-time PM status of all devices is +'suspended', but it need not reflect the actual physical state of the device. +Thus, if the device is initially active (i.e. it is able to process I/O), its +run-time PM status must be changed to 'active', with the help of +pm_runtime_set_active(), before pm_runtime_enable() is called for the device. + +However, if the device has a parent and the parent's run-time PM is enabled, +calling pm_runtime_set_active() for the device will affect the parent, unless +the parent's 'power.ignore_children' flag is set. Namely, in that case the +parent won't be able to suspend at run time, using the PM core's helper +functions, as long as the child's status is 'active', even if the child's +run-time PM is still disabled (i.e. pm_runtime_enable() hasn't been called for +the child yet or pm_runtime_disable() has been called for it). For this reason, +once pm_runtime_set_active() has been called for the device, pm_runtime_enable() +should be called for it too as soon as reasonably possible or its run-time PM +status should be changed back to 'suspended' with the help of +pm_runtime_set_suspended(). + +If the default initial run-time PM status of the device (i.e. 'suspended') +reflects the actual state of the device, its bus type's or its driver's +->probe() callback will likely need to wake it up using one of the PM core's +helper functions described in Section 4. In that case, pm_runtime_resume() +should be used. Of course, for this purpose the device's run-time PM has to be +enabled earlier by calling pm_runtime_enable(). + +If the device bus type's or driver's ->probe() or ->remove() callback runs +pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts, +they will fail returning -EAGAIN, because the device's usage counter is +incremented by the core before executing ->probe() and ->remove(). Still, it +may be desirable to suspend the device as soon as ->probe() or ->remove() has +finished, so the PM core uses pm_runtime_idle_sync() to invoke the device bus +type's ->runtime_idle() callback at that time. diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 68c236c01846..e352d754875c 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -1,5 +1,5 @@ 0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800] - 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] + 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] 2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036] 3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208] 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201] diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 15562427e8a9..c913e5614195 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -153,8 +153,8 @@ 152 -> Asus Tiger Rev:1.00 [1043:4857] 153 -> Kworld Plus TV Analog Lite PCI [17de:7128] 154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d] -155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid [0070:6706,0070:6708] -156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a] +155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid [0070:6706,0070:6708] +156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a] 157 -> Avermedia AVerTV Studio 507UA [1461:a11b] 158 -> AVerMedia Cardbus TV/Radio (E501R) [1461:b7e9] 159 -> Beholder BeholdTV 505 RDS [0000:505B] diff --git a/MAINTAINERS b/MAINTAINERS index b1114cfac6bf..60299a9a7adb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -904,7 +904,7 @@ F: drivers/input/misc/ati_remote2.c ATLX ETHERNET DRIVERS M: Jay Cliburn -M: Chris Snook +M: Chris Snook M: Jie Yang L: atl1-devel@lists.sourceforge.net W: http://sourceforge.net/projects/atl1 @@ -2238,6 +2238,14 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/pac207.c +GSPCA SN9C20X SUBDRIVER +P: Brian Johnson +M: brijohn@gmail.com +L: linux-media@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +S: Maintained +F: drivers/media/video/gspca/sn9c20x.c + GSPCA T613 SUBDRIVER M: Leandro Costantino L: linux-media@vger.kernel.org @@ -3421,6 +3429,7 @@ F: drivers/mfd/ MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM S: Orphan +L: linux-mmc@vger.kernel.org F: drivers/mmc/ F: include/linux/mmc/ @@ -3555,6 +3564,9 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git S: Maintained F: net/ F: include/net/ +F: include/linux/in.h +F: include/linux/net.h +F: include/linux/netdevice.h NETWORKING [IPv4/IPv6] M: "David S. Miller" @@ -3590,6 +3602,8 @@ W: http://www.linuxfoundation.org/en/Net T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git S: Odd Fixes F: drivers/net/ +F: include/linux/if_* +F: include/linux/*device.h NETXEN (1/10) GbE SUPPORT M: Dhananjay Phadke @@ -3796,7 +3810,7 @@ W: http://open-osd.org T: git git://git.open-osd.org/open-osd.git S: Maintained F: drivers/scsi/osd/ -F: drivers/include/scsi/osd_* +F: include/scsi/osd_* F: fs/exofs/ P54 WIRELESS DRIVER diff --git a/Makefile b/Makefile index abcfa85f8f82..9c87e60d169c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 31 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* diff --git a/REPORTING-BUGS b/REPORTING-BUGS index ab0c56630a8c..55a6074ccbb7 100644 --- a/REPORTING-BUGS +++ b/REPORTING-BUGS @@ -15,7 +15,10 @@ worry too much about getting the wrong person. If you are unsure send it to the person responsible for the code relevant to what you were doing. If it occurs repeatably try and describe how to recreate it. That is worth even more than the oops itself. The list of maintainers and -mailing lists is in the MAINTAINERS file in this directory. +mailing lists is in the MAINTAINERS file in this directory. If you +know the file name that causes the problem you can use the following +command in this directory to find some of the maintainers of that file: + perl scripts/get_maintainer.pl -f If it is a security bug, please copy the Security Contact listed in the MAINTAINERS file. They can help coordinate bugfix and disclosure. diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index eb2cb31825c0..f238df66efd4 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0" +CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -1354,7 +1354,7 @@ CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TWL4030_USB=y -CONFIG_MMC=m +CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -1449,7 +1449,8 @@ CONFIG_RTC_DRV_TWL4030=m # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set # CONFIG_STAGING is not set diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h index c61642b40603..9f390ce335cb 100644 --- a/arch/arm/include/asm/device.h +++ b/arch/arm/include/asm/device.h @@ -12,4 +12,7 @@ struct dev_archdata { #endif }; +struct pdev_archdata { +}; + #endif diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index ee1304f22f94..5ccce0a9b03c 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -201,7 +201,8 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } struct membank { unsigned long start; unsigned long size; - int node; + unsigned short node; + unsigned short highmem; }; struct meminfo { diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index ce63048d45eb..8a947d42a6f1 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -17,7 +17,7 @@ #include -#define IO_SPACE_LIMIT 0xffff0000 +#define IO_SPACE_LIMIT 0x0000ffff extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 4704405165a1..b48581e7dedd 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -63,7 +63,7 @@ static struct imxuart_platform_data uart_pdata = { static int devboard_sdhc2_get_ro(struct device *dev) { - return gpio_get_value(SDHC2_WP); + return !gpio_get_value(SDHC2_WP); } static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 641c3d6153ae..901fb0166c0e 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -67,7 +67,7 @@ static unsigned int marxbot_pins[] = { static int marxbot_sdhc2_get_ro(struct device *dev) { - return gpio_get_value(SDHC2_WP); + return !gpio_get_value(SDHC2_WP); } static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index a17f2e411609..2a2da4739ecf 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -94,7 +94,7 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = { static int moboard_sdhc1_get_ro(struct device *dev) { - return gpio_get_value(SDHC1_WP); + return !gpio_get_value(SDHC1_WP); } static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c index fe52fb1bb8b7..8d386000fc40 100644 --- a/arch/arm/mach-mx3/pcm037_eet.c +++ b/arch/arm/mach-mx3/pcm037_eet.c @@ -24,15 +24,6 @@ #include "devices.h" static unsigned int pcm037_eet_pins[] = { - /* SPI #1 */ - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS0__SS0, - MX31_PIN_CSPI1_SS1__SS1, - MX31_PIN_CSPI1_SS2__SS2, - /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO), /* GPIO keys */ diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 9c3fdcdf76c3..8ec2a132904d 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -141,7 +141,7 @@ static inline void board_smc91x_init(void) static void __init omap_2430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 496a90e4ea7a..ac262cd74503 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -169,7 +169,7 @@ static struct platform_device *sdp3430_devices[] __initdata = { static void __init omap_3430sdp_init_irq(void) { - omap2_init_common_hw(hyb18m512160af6_sdrc_params); + omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 57e477bd89c6..b0c7402248f7 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -59,7 +59,7 @@ static void __init gic_init_irq(void) static void __init omap_4430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(1); #endif diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 06dfba888b0c..dcfc20d03894 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -250,7 +250,7 @@ out: static void __init omap_apollon_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); apollon_init_smc91x(); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 3492162a65c3..fd00aa03690c 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,7 +33,7 @@ static void __init omap_generic_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); } diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index e7d017cdc438..7b1d61d5bb2c 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -270,7 +270,7 @@ static void __init h4_init_flash(void) static void __init omap_h4_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); h4_init_flash(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d8bc0a7dcb8d..ea383f88cb1b 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -270,7 +270,7 @@ static inline void __init ldp_init_smsc911x(void) static void __init omap_ldp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); ldp_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 991ac9c38032..e00ba128cece 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -282,7 +282,8 @@ static int __init omap3_beagle_i2c_init(void) static void __init omap3_beagle_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); @@ -408,6 +409,10 @@ static void __init omap3_beagle_init(void) usb_musb_init(); omap3beagle_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init omap3_beagle_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index cf3dd771a678..c4b144647dc5 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -280,7 +280,7 @@ struct spi_board_info omap3evm_spi_board_info[] = { static void __init omap3_evm_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL); omap_init_irq(); omap_gpio_init(); omap3evm_init_smc911x(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index e32aa23ce962..864ee3d021f7 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -310,7 +311,8 @@ static int __init omap3pandora_i2c_init(void) static void __init omap3pandora_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } @@ -397,6 +399,10 @@ static void __init omap3pandora_init(void) omap3pandora_ads7846_init(); pandora_keys_gpio_init(); usb_musb_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init omap3pandora_map_io(void) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index dff5528fbfb5..6bce23004aa4 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include "sdram-micron-mt46h32m32lf-6.h" @@ -51,6 +52,7 @@ #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 +#define OVERO_GPIO_PENDOWN 114 #define OVERO_GPIO_BT_NRESET 164 #define OVERO_GPIO_USBH_CPEN 168 #define OVERO_GPIO_USBH_NRESET 183 @@ -146,7 +148,7 @@ static struct platform_device overo_smsc911x_device = { .name = "smsc911x", .id = -1, .num_resources = ARRAY_SIZE(overo_smsc911x_resources), - .resource = &overo_smsc911x_resources, + .resource = overo_smsc911x_resources, .dev = { .platform_data = &overo_smsc911x_config, }, @@ -360,7 +362,8 @@ static int __init overo_i2c_init(void) static void __init overo_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } @@ -395,6 +398,10 @@ static void __init overo_init(void) overo_ads7846_init(); overo_init_smsc911x(); + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); + if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) { diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9a0bf6744a05..56d931a425f7 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = { .setup = rx51_twlgpio_setup, }; +static struct twl4030_usb_data rx51_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + static struct twl4030_platform_data rx51_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = { .gpio = &rx51_gpio_data, .keypad = &rx51_kp_data, .madc = &rx51_madc_data, + .usb = &rx51_usb_data, .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 374ff63c3eb2..1c9e07fe8266 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -61,7 +61,7 @@ static struct omap_board_config_kernel rx51_config[] = { static void __init rx51_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } @@ -75,6 +75,10 @@ static void __init rx51_init(void) omap_serial_init(); usb_musb_init(); rx51_peripherals_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init rx51_map_io(void) diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index bcc0f7632dea..427b7b8b1237 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -25,7 +25,7 @@ static void __init omap_zoom2_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index b0665f161c03..456e2ad5f621 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -38,8 +39,6 @@ #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" -#define MAX_CLOCK_ENABLE_WAIT 100000 - /* DPLL rate rounding: minimum DPLL multiplier, divider values */ #define DPLL_MIN_MULTIPLIER 1 #define DPLL_MIN_DIVIDER 1 @@ -274,83 +273,97 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk) } /** - * omap2_wait_clock_ready - wait for clock to enable - * @reg: physical address of clock IDLEST register - * @mask: value to mask against to determine if the clock is active - * @name: name of the clock (for printk) + * omap2_clk_dflt_find_companion - find companion clock to @clk + * @clk: struct clk * to find the companion clock of + * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in + * @other_bit: u8 ** to return the companion clock bit shift in * - * Returns 1 if the clock enabled in time, or 0 if it failed to enable - * in roughly MAX_CLOCK_ENABLE_WAIT microseconds. - */ -int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name) -{ - int i = 0; - int ena = 0; - - /* - * 24xx uses 0 to indicate not ready, and 1 to indicate ready. - * 34xx reverses this, just to keep us on our toes - */ - if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) - ena = mask; - else if (cpu_mask & RATE_IN_343X) - ena = 0; - - /* Wait for lock */ - while (((__raw_readl(reg) & mask) != ena) && - (i++ < MAX_CLOCK_ENABLE_WAIT)) { - udelay(1); - } - - if (i <= MAX_CLOCK_ENABLE_WAIT) - pr_debug("Clock %s stable after %d loops\n", name, i); - else - printk(KERN_ERR "Clock %s didn't enable in %d tries\n", - name, MAX_CLOCK_ENABLE_WAIT); - - - return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0; -}; - - -/* - * Note: We don't need special code here for INVERT_ENABLE - * for the time being since INVERT_ENABLE only applies to clocks enabled by + * Note: We don't need special code here for INVERT_ENABLE for the + * time being since INVERT_ENABLE only applies to clocks enabled by * CM_CLKEN_PLL + * + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's + * just a matter of XORing the bits. + * + * Some clocks don't have companion clocks. For example, modules with + * only an interface clock (such as MAILBOXES) don't have a companion + * clock. Right now, this code relies on the hardware exporting a bit + * in the correct companion register that indicates that the + * nonexistent 'companion clock' is active. Future patches will + * associate this type of code with per-module data structures to + * avoid this issue, and remove the casts. No return value. */ -static void omap2_clk_wait_ready(struct clk *clk) +void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, + u8 *other_bit) { - void __iomem *reg, *other_reg, *st_reg; - u32 bit; - - /* - * REVISIT: This code is pretty ugly. It would be nice to generalize - * it and pull it into struct clk itself somehow. - */ - reg = clk->enable_reg; + u32 r; /* * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes * it's just a matter of XORing the bits. */ - other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN)); + r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN)); - /* Check if both functional and interface clocks - * are running. */ - bit = 1 << clk->enable_bit; - if (!(__raw_readl(other_reg) & bit)) - return; - st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */ - - omap2_wait_clock_ready(st_reg, bit, clk->name); + *other_reg = (__force void __iomem *)r; + *other_bit = clk->enable_bit; } -static int omap2_dflt_clk_enable(struct clk *clk) +/** + * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk + * @clk: struct clk * to find IDLEST info for + * @idlest_reg: void __iomem ** to return the CM_IDLEST va in + * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in + * + * Return the CM_IDLEST register address and bit shift corresponding + * to the module that "owns" this clock. This default code assumes + * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that + * the IDLEST register address ID corresponds to the CM_*CLKEN + * register address ID (e.g., that CM_FCLKEN2 corresponds to + * CM_IDLEST2). This is not true for all modules. No return value. + */ +void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = clk->enable_bit; +} + +/** + * omap2_module_wait_ready - wait for an OMAP module to leave IDLE + * @clk: struct clk * belonging to the module + * + * If the necessary clocks for the OMAP hardware IP block that + * corresponds to clock @clk are enabled, then wait for the module to + * indicate readiness (i.e., to leave IDLE). This code does not + * belong in the clock code and will be moved in the medium term to + * module-dependent code. No return value. + */ +static void omap2_module_wait_ready(struct clk *clk) +{ + void __iomem *companion_reg, *idlest_reg; + u8 other_bit, idlest_bit; + + /* Not all modules have multiple clocks that their IDLEST depends on */ + if (clk->ops->find_companion) { + clk->ops->find_companion(clk, &companion_reg, &other_bit); + if (!(__raw_readl(companion_reg) & (1 << other_bit))) + return; + } + + clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit); + + omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name); +} + +int omap2_dflt_clk_enable(struct clk *clk) { u32 v; if (unlikely(clk->enable_reg == NULL)) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + pr_err("clock.c: Enable for %s without enable code\n", clk->name); return 0; /* REVISIT: -EINVAL */ } @@ -363,26 +376,13 @@ static int omap2_dflt_clk_enable(struct clk *clk) __raw_writel(v, clk->enable_reg); v = __raw_readl(clk->enable_reg); /* OCP barrier */ + if (clk->ops->find_idlest) + omap2_module_wait_ready(clk); + return 0; } -static int omap2_dflt_clk_enable_wait(struct clk *clk) -{ - int ret; - - if (!clk->enable_reg) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", - clk->name); - return 0; /* REVISIT: -EINVAL */ - } - - ret = omap2_dflt_clk_enable(clk); - if (ret == 0) - omap2_clk_wait_ready(clk); - return ret; -} - -static void omap2_dflt_clk_disable(struct clk *clk) +void omap2_dflt_clk_disable(struct clk *clk) { u32 v; @@ -406,8 +406,10 @@ static void omap2_dflt_clk_disable(struct clk *clk) } const struct clkops clkops_omap2_dflt_wait = { - .enable = omap2_dflt_clk_enable_wait, + .enable = omap2_dflt_clk_enable, .disable = omap2_dflt_clk_disable, + .find_companion = omap2_clk_dflt_find_companion, + .find_idlest = omap2_clk_dflt_find_idlest, }; const struct clkops clkops_omap2_dflt = { diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 2679ddfa6424..9ae7540f8af2 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -65,6 +65,12 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate); u32 omap2_get_dpll_rate(struct clk *clk); int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); void omap2_clk_prepare_for_reboot(void); +int omap2_dflt_clk_enable(struct clk *clk); +void omap2_dflt_clk_disable(struct clk *clk); +void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, + u8 *other_bit); +void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, + u8 *idlest_bit); extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_omap2_dflt; diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 44de0271fc2f..bc5d3ac66611 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -30,6 +30,7 @@ #include #include +#include #include #include @@ -43,6 +44,18 @@ static const struct clkops clkops_oscck; static const struct clkops clkops_fixed; +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); + +/* 2430 I2CHS has non-standard IDLEST register */ +static const struct clkops clkops_omap2430_i2chs_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap2430_clk_i2chs_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + #include "clock24xx.h" struct omap_clk { @@ -239,6 +252,26 @@ static void __iomem *prcm_clksrc_ctrl; * Omap24xx specific clock functions *-------------------------------------------------------------------------*/ +/** + * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the + * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function + * passes back the correct CM_IDLEST register address for I2CHS + * modules. No return value. + */ +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST); + *idlest_bit = clk->enable_bit; +} + + /** * omap2xxx_clk_get_core_rate - return the CORE_CLK rate * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") @@ -325,8 +358,8 @@ static int omap2_clk_fixed_enable(struct clk *clk) else if (clk == &apll54_ck) cval = OMAP24XX_ST_54M_APLL; - omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, - clk->name); + omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, + clk->name); /* * REVISIT: Should we return an error code if omap2_wait_clock_ready() diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 458f00cdcbea..d19cf7a7d8db 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -2337,7 +2337,7 @@ static struct clk i2c2_fck = { static struct clk i2chs2_fck = { .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2430_i2chs_wait, .id = 2, .parent = &func_96m_ck, .clkdm_name = "core_l4_clkdm", @@ -2370,7 +2370,7 @@ static struct clk i2c1_fck = { static struct clk i2chs1_fck = { .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2430_i2chs_wait, .id = 1, .parent = &func_96m_ck, .clkdm_name = "core_l4_clkdm", diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 045da923e75b..cd7819cc0c9e 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -2,7 +2,7 @@ * OMAP3-specific clock framework functions * * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation + * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley * Testing and integration fixes by Jouni Högander @@ -41,6 +41,37 @@ static const struct clkops clkops_noncore_dpll_ops; +static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); +static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); +static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); + +static const struct clkops clkops_omap3430es2_ssi_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_ssi_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +static const struct clkops clkops_omap3430es2_hsotgusb_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +static const struct clkops clkops_omap3430es2_dss_usbhost_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + #include "clock34xx.h" struct omap_clk { @@ -157,10 +188,13 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2), CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2), CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), @@ -193,18 +227,21 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), - CLK(NULL, "ssi_ick", &ssi_ick, CK_343X), + CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2), CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), CLK("omap_rng", "ick", &rng_ick, CK_343X), CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), - CLK("omapfb", "ick", &dss_ick, CK_343X), + CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2), CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), CLK(NULL, "cam_ick", &cam_ick, CK_343X), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), @@ -300,6 +337,73 @@ static struct omap_clk omap34xx_clks[] = { */ #define SDRC_MPURATE_LOOPS 96 +/** + * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift + * from the CM_{I,F}CLKEN bit. Pass back the correct info via + * @idlest_reg and @idlest_bit. No return value. + */ +static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; +} + +/** + * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * Some OMAP modules on OMAP3 ES2+ chips have both initiator and + * target IDLEST bits. For our purposes, we are concerned with the + * target IDLEST bits, which exist at a different bit position than + * the *CLKEN bit position for these modules (DSS and USBHOST) (The + * default find_idlest code assumes that they are at the same + * position.) No return value. + */ +static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + /* USBHOST_IDLE has same shift */ + *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; +} + +/** + * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different + * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via + * @idlest_reg and @idlest_bit. No return value. + */ +static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; +} + /** * omap3_dpll_recalc - recalculate DPLL rate * @clk: DPLL struct clk @@ -725,7 +829,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) u32 unlock_dll = 0; u32 c; unsigned long validrate, sdrcrate, mpurate; - struct omap_sdrc_params *sp; + struct omap_sdrc_params *sdrc_cs0; + struct omap_sdrc_params *sdrc_cs1; + int ret; if (!clk || !rate) return -EINVAL; @@ -743,8 +849,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) else sdrcrate >>= ((clk->rate / rate) >> 1); - sp = omap2_sdrc_get_params(sdrcrate); - if (!sp) + ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1); + if (ret) return -EINVAL; if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { @@ -765,12 +871,29 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, validrate); - pr_debug("clock: SDRC timing params used: %08x %08x %08x\n", - sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); + pr_debug("clock: SDRC CS0 timing params used:" + " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr); + if (sdrc_cs1) + pr_debug("clock: SDRC CS1 timing params used: " + " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", + sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, + sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); - omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, - sp->actim_ctrlb, new_div, unlock_dll, c, - sp->mr, rate > clk->rate); + if (sdrc_cs1) + omap3_configure_core_dpll( + new_div, unlock_dll, c, rate > clk->rate, + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, + sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, + sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); + else + omap3_configure_core_dpll( + new_div, unlock_dll, c, rate > clk->rate, + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, + 0, 0, 0, 0); return 0; } diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index e433aec4efdd..57cc2725b923 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1568,7 +1568,7 @@ static const struct clksel ssi_ssr_clksel[] = { { .parent = NULL } }; -static struct clk ssi_ssr_fck = { +static struct clk ssi_ssr_fck_3430es1 = { .name = "ssi_ssr_fck", .ops = &clkops_omap2_dflt, .init = &omap2_init_clksel_parent, @@ -1581,10 +1581,31 @@ static struct clk ssi_ssr_fck = { .recalc = &omap2_clksel_recalc, }; -static struct clk ssi_sst_fck = { +static struct clk ssi_ssr_fck_3430es2 = { + .name = "ssi_ssr_fck", + .ops = &clkops_omap3430es2_ssi_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_sst_fck_3430es1 = { .name = "ssi_sst_fck", .ops = &clkops_null, - .parent = &ssi_ssr_fck, + .parent = &ssi_ssr_fck_3430es1, + .fixed_div = 2, + .recalc = &omap2_fixed_divisor_recalc, +}; + +static struct clk ssi_sst_fck_3430es2 = { + .name = "ssi_sst_fck", + .ops = &clkops_null, + .parent = &ssi_ssr_fck_3430es2, .fixed_div = 2, .recalc = &omap2_fixed_divisor_recalc, }; @@ -1606,9 +1627,19 @@ static struct clk core_l3_ick = { .recalc = &followparent_recalc, }; -static struct clk hsotgusb_ick = { +static struct clk hsotgusb_ick_3430es1 = { .name = "hsotgusb_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hsotgusb_ick_3430es2 = { + .name = "hsotgusb_ick", + .ops = &clkops_omap3430es2_hsotgusb_wait, .parent = &core_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, @@ -1947,7 +1978,7 @@ static struct clk ssi_l4_ick = { .recalc = &followparent_recalc, }; -static struct clk ssi_ick = { +static struct clk ssi_ick_3430es1 = { .name = "ssi_ick", .ops = &clkops_omap2_dflt, .parent = &ssi_l4_ick, @@ -1957,6 +1988,16 @@ static struct clk ssi_ick = { .recalc = &followparent_recalc, }; +static struct clk ssi_ick_3430es2 = { + .name = "ssi_ick", + .ops = &clkops_omap3430es2_ssi_wait, + .parent = &ssi_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + /* REVISIT: Technically the TRM claims that this is CORE_CLK based, * but l4_ick makes more sense to me */ @@ -2024,7 +2065,7 @@ static struct clk des1_ick = { }; /* DSS */ -static struct clk dss1_alwon_fck = { +static struct clk dss1_alwon_fck_3430es1 = { .name = "dss1_alwon_fck", .ops = &clkops_omap2_dflt, .parent = &dpll4_m4x2_ck, @@ -2034,6 +2075,16 @@ static struct clk dss1_alwon_fck = { .recalc = &followparent_recalc, }; +static struct clk dss1_alwon_fck_3430es2 = { + .name = "dss1_alwon_fck", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &dpll4_m4x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS1_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk dss_tv_fck = { .name = "dss_tv_fck", .ops = &clkops_omap2_dflt, @@ -2067,7 +2118,7 @@ static struct clk dss2_alwon_fck = { .recalc = &followparent_recalc, }; -static struct clk dss_ick = { +static struct clk dss_ick_3430es1 = { /* Handles both L3 and L4 clocks */ .name = "dss_ick", .ops = &clkops_omap2_dflt, @@ -2079,6 +2130,18 @@ static struct clk dss_ick = { .recalc = &followparent_recalc, }; +static struct clk dss_ick_3430es2 = { + /* Handles both L3 and L4 clocks */ + .name = "dss_ick", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + /* CAM */ static struct clk cam_mclk = { @@ -2118,7 +2181,7 @@ static struct clk csi2_96m_fck = { static struct clk usbhost_120m_fck = { .name = "usbhost_120m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll5_m2_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), @@ -2129,7 +2192,7 @@ static struct clk usbhost_120m_fck = { static struct clk usbhost_48m_fck = { .name = "usbhost_48m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap3430es2_dss_usbhost_wait, .parent = &omap_48m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), @@ -2141,7 +2204,7 @@ static struct clk usbhost_48m_fck = { static struct clk usbhost_ick = { /* Handles both L3 and L4 clocks */ .name = "usbhost_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap3430es2_dss_usbhost_wait, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 1d3c93bf86d3..f3c91a1ca391 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -29,9 +29,9 @@ * These registers appear once per CM module. */ -#define OMAP3430_CM_REVISION OMAP_CM_REGADDR(OCP_MOD, 0x0000) -#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010) -#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c) +#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) +#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) +#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) #define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3a86b0f66031..e9b9bcb19b4e 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -276,14 +276,15 @@ static int __init _omap2_init_reprogram_sdrc(void) return v; } -void __init omap2_init_common_hw(struct omap_sdrc_params *sp) +void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) { omap2_mux_init(); #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */ pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); - omap2_sdrc_init(sp); + omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); #endif gpmc_init(); diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 1541fd4c8d0f..3c04c2f1b23f 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -119,6 +119,7 @@ static int twl_mmc_late_init(struct device *dev) if (i != 0) break; ret = PTR_ERR(reg); + hsmmc[i].vcc = NULL; goto err; } hsmmc[i].vcc = reg; @@ -165,8 +166,13 @@ done: static void twl_mmc_cleanup(struct device *dev) { struct omap_mmc_platform_data *mmc = dev->platform_data; + int i; gpio_free(mmc->slots[0].switch_pin); + for(i = 0; i < ARRAY_SIZE(hsmmc); i++) { + regulator_put(hsmmc[i].vcc); + regulator_put(hsmmc[i].vcc_aux); + } } #ifdef CONFIG_PM diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 026c4fc883a7..43d6b92b65f2 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -486,6 +486,12 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) + +/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ +MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) }; #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index f7b3baf76678..21201cd4117b 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -11,9 +11,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PM_H #define __ARCH_ARM_MACH_OMAP2_PM_H -extern int omap2_pm_init(void); -extern int omap3_pm_init(void); - #ifdef CONFIG_PM_DEBUG extern void omap2_pm_dump(int mode, int resume, unsigned int us); extern int omap2_pm_debug; diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index db1025562fb0..528dbdc26e23 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -470,7 +470,7 @@ static void __init prcm_setup_regs(void) WKUP_MOD, PM_WKEN); } -int __init omap2_pm_init(void) +static int __init omap2_pm_init(void) { u32 l; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 841d4c5ed8be..488d595d8e4b 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -39,7 +39,9 @@ struct power_state { struct powerdomain *pwrdm; u32 next_state; +#ifdef CONFIG_SUSPEND u32 saved_state; +#endif struct list_head node; }; @@ -293,6 +295,9 @@ out: local_irq_enable(); } +#ifdef CONFIG_SUSPEND +static suspend_state_t suspend_state; + static int omap3_pm_prepare(void) { disable_hlt(); @@ -321,7 +326,6 @@ static int omap3_pm_suspend(void) restore: /* Restore next_pwrsts */ list_for_each_entry(pwrst, &pwrst_list, node) { - set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { printk(KERN_INFO "Powerdomain (%s) didn't enter " @@ -329,6 +333,7 @@ restore: pwrst->pwrdm->name, pwrst->next_state); ret = -1; } + set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) printk(KERN_ERR "Could not enter target state in pm_suspend\n"); @@ -339,11 +344,11 @@ restore: return ret; } -static int omap3_pm_enter(suspend_state_t state) +static int omap3_pm_enter(suspend_state_t unused) { int ret = 0; - switch (state) { + switch (suspend_state) { case PM_SUSPEND_STANDBY: case PM_SUSPEND_MEM: ret = omap3_pm_suspend(); @@ -360,12 +365,30 @@ static void omap3_pm_finish(void) enable_hlt(); } +/* Hooks to enable / disable UART interrupts during suspend */ +static int omap3_pm_begin(suspend_state_t state) +{ + suspend_state = state; + omap_uart_enable_irqs(0); + return 0; +} + +static void omap3_pm_end(void) +{ + suspend_state = PM_SUSPEND_ON; + omap_uart_enable_irqs(1); + return; +} + static struct platform_suspend_ops omap_pm_ops = { + .begin = omap3_pm_begin, + .end = omap3_pm_end, .prepare = omap3_pm_prepare, .enter = omap3_pm_enter, .finish = omap3_pm_finish, .valid = suspend_valid_only_mem, }; +#endif /* CONFIG_SUSPEND */ /** @@ -613,6 +636,24 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + /* Don't attach IVA interrupts */ + prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + + /* Clear any pending 'reset' flags */ + prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); + + /* Clear any pending PRCM interrupts */ + prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + omap3_iva_idle(); omap3_d2d_idle(); } @@ -652,7 +693,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm) return 0; } -int __init omap3_pm_init(void) +static int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; int ret; @@ -692,7 +733,9 @@ int __init omap3_pm_init(void) _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, omap34xx_cpu_suspend_sz); +#ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); +#endif /* CONFIG_SUSPEND */ pm_idle = omap3_pm_idle; diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index f945156d5585..ced555a4cd1a 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -28,6 +29,8 @@ static void __iomem *prm_base; static void __iomem *cm_base; +#define MAX_MODULE_ENABLE_WAIT 100000 + u32 omap_prcm_get_reset_sources(void) { /* XXX This presumably needs modification for 34XX */ @@ -120,6 +123,46 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) } EXPORT_SYMBOL(cm_rmw_mod_reg_bits); +/** + * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness + * @reg: physical address of module IDLEST register + * @mask: value to mask against to determine if the module is active + * @name: name of the clock (for printk) + * + * Returns 1 if the module indicated readiness in time, or 0 if it + * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds. + */ +int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name) +{ + int i = 0; + int ena = 0; + + /* + * 24xx uses 0 to indicate not ready, and 1 to indicate ready. + * 34xx reverses this, just to keep us on our toes + */ + if (cpu_is_omap24xx()) + ena = mask; + else if (cpu_is_omap34xx()) + ena = 0; + else + BUG(); + + /* Wait for lock */ + while (((__raw_readl(reg) & mask) != ena) && + (i++ < MAX_MODULE_ENABLE_WAIT)) + udelay(1); + + if (i < MAX_MODULE_ENABLE_WAIT) + pr_debug("cm: Module associated with clock %s ready after %d " + "loops\n", name, i); + else + pr_err("cm: Module associated with clock %s didn't enable in " + "%d tries\n", name, MAX_MODULE_ENABLE_WAIT); + + return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; +}; + void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) { prm_base = omap2_globals->prm; diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 2045441e8385..9e3bd4fa7810 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -32,7 +32,7 @@ #include #include "sdrc.h" -static struct omap_sdrc_params *sdrc_init_params; +static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; @@ -45,33 +45,49 @@ void __iomem *omap2_sms_base; /** * omap2_sdrc_get_params - return SDRC register values for a given clock rate * @r: SDRC clock rate (in Hz) + * @sdrc_cs0: chip select 0 ram timings ** + * @sdrc_cs1: chip select 1 ram timings ** * * Return pre-calculated values for the SDRC_ACTIM_CTRLA, - * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given - * SDRC clock rate 'r'. These parameters control various timing - * delays in the SDRAM controller that are expressed in terms of the - * number of SDRC clock cycles to wait; hence the clock rate - * dependency. Note that sdrc_init_params must be sorted rate - * descending. Also assumes that both chip-selects use the same - * timing parameters. Returns a struct omap_sdrc_params * upon - * success, or NULL upon failure. + * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01] + * structs,for a given SDRC clock rate 'r'. + * These parameters control various timing delays in the SDRAM controller + * that are expressed in terms of the number of SDRC clock cycles to + * wait; hence the clock rate dependency. + * + * Supports 2 different timing parameters for both chip selects. + * + * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending. + * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size + * as sdrc_init_params_cs_0. + * + * Fills in the struct omap_sdrc_params * for each chip select. + * Returns 0 upon success or -1 upon failure. */ -struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r) +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1) { - struct omap_sdrc_params *sp; + struct omap_sdrc_params *sp0, *sp1; - if (!sdrc_init_params) - return NULL; + if (!sdrc_init_params_cs0) + return -1; - sp = sdrc_init_params; + sp0 = sdrc_init_params_cs0; + sp1 = sdrc_init_params_cs1; - while (sp->rate && sp->rate != r) - sp++; + while (sp0->rate && sp0->rate != r) { + sp0++; + if (sdrc_init_params_cs1) + sp1++; + } - if (!sp->rate) - return NULL; + if (!sp0->rate) + return -1; - return sp; + *sdrc_cs0 = sp0; + *sdrc_cs1 = sp1; + return 0; } @@ -83,13 +99,15 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) /** * omap2_sdrc_init - initialize SMS, SDRC devices on boot - * @sp: pointer to a null-terminated list of struct omap_sdrc_params + * @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params + * Support for 2 chip selects timings * * Turn on smart idle modes for SDRAM scheduler and controller. * Program a known-good configuration for the SDRC to deal with buggy * bootloaders. */ -void __init omap2_sdrc_init(struct omap_sdrc_params *sp) +void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) { u32 l; @@ -103,11 +121,15 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) l |= (0x2 << 3); sdrc_write_reg(l, SDRC_SYSCONFIG); - sdrc_init_params = sp; + sdrc_init_params_cs0 = sdrc_cs0; + sdrc_init_params_cs1 = sdrc_cs1; /* XXX Enable SRFRONIDLEREQ here also? */ + /* + * PWDENA should not be set due to 34xx erratum 1.150 - PWDENA + * can cause random memory corruption + */ l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | - (1 << SDRC_POWER_PWDENA_SHIFT) | (1 << SDRC_POWER_PAGEPOLICY_SHIFT); sdrc_write_reg(l, SDRC_POWER); } diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index b094c15bfe47..a7421a50410b 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -54,6 +54,7 @@ struct omap_uart_state { struct plat_serial8250_port *p; struct list_head node; + struct platform_device pdev; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) int context_valid; @@ -68,10 +69,9 @@ struct omap_uart_state { #endif }; -static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS]; static LIST_HEAD(uart_list); -static struct plat_serial8250_port serial_platform_data[] = { +static struct plat_serial8250_port serial_platform_data0[] = { { .membase = IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, @@ -81,6 +81,12 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { + .flags = 0 + } +}; + +static struct plat_serial8250_port serial_platform_data1[] = { + { .membase = IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = 73, @@ -89,6 +95,12 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { + .flags = 0 + } +}; + +static struct plat_serial8250_port serial_platform_data2[] = { + { .membase = IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = 74, @@ -217,6 +229,40 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) clk_disable(uart->fck); } +static void omap_uart_enable_wakeup(struct omap_uart_state *uart) +{ + /* Set wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v |= uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are set */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v |= OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + +static void omap_uart_disable_wakeup(struct omap_uart_state *uart) +{ + /* Clear wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v &= ~uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are cleared */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v &= ~OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, int enable) { @@ -246,6 +292,11 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart) static void omap_uart_allow_sleep(struct omap_uart_state *uart) { + if (device_may_wakeup(&uart->pdev.dev)) + omap_uart_enable_wakeup(uart); + else + omap_uart_disable_wakeup(uart); + if (!uart->clocked) return; @@ -292,7 +343,6 @@ void omap_uart_resume_idle(int num) /* Check for normal UART wakeup */ if (__raw_readl(uart->wk_st) & uart->wk_mask) omap_uart_block_sleep(uart); - return; } } @@ -346,16 +396,13 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) return IRQ_NONE; } -static u32 sleep_timeout = DEFAULT_TIMEOUT; - static void omap_uart_idle_init(struct omap_uart_state *uart) { - u32 v; struct plat_serial8250_port *p = uart->p; int ret; uart->can_sleep = 0; - uart->timeout = sleep_timeout; + uart->timeout = DEFAULT_TIMEOUT; setup_timer(&uart->timer, omap_uart_idle_timer, (unsigned long) uart); mod_timer(&uart->timer, jiffies + uart->timeout); @@ -413,76 +460,101 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) uart->padconf = 0; } - /* Set wake-enable bit */ - if (uart->wk_en && uart->wk_mask) { - v = __raw_readl(uart->wk_en); - v |= uart->wk_mask; - __raw_writel(v, uart->wk_en); - } - - /* Ensure IOPAD wake-enables are set */ - if (cpu_is_omap34xx() && uart->padconf) { - u16 v; - - v = omap_ctrl_readw(uart->padconf); - v |= OMAP3_PADCONF_WAKEUPENABLE0; - omap_ctrl_writew(v, uart->padconf); - } - p->flags |= UPF_SHARE_IRQ; ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, "serial idle", (void *)uart); WARN_ON(ret); } -static ssize_t sleep_timeout_show(struct kobject *kobj, - struct kobj_attribute *attr, - char *buf) +void omap_uart_enable_irqs(int enable) { - return sprintf(buf, "%u\n", sleep_timeout / HZ); + int ret; + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (enable) + ret = request_irq(uart->p->irq, omap_uart_interrupt, + IRQF_SHARED, "serial idle", (void *)uart); + else + free_irq(uart->p->irq, (void *)uart); + } } -static ssize_t sleep_timeout_store(struct kobject *kobj, - struct kobj_attribute *attr, +static ssize_t sleep_timeout_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_uart_state *uart = container_of(pdev, + struct omap_uart_state, pdev); + + return sprintf(buf, "%u\n", uart->timeout / HZ); +} + +static ssize_t sleep_timeout_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t n) { - struct omap_uart_state *uart; + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_uart_state *uart = container_of(pdev, + struct omap_uart_state, pdev); unsigned int value; if (sscanf(buf, "%u", &value) != 1) { printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); return -EINVAL; } - sleep_timeout = value * HZ; - list_for_each_entry(uart, &uart_list, node) { - uart->timeout = sleep_timeout; - if (uart->timeout) - mod_timer(&uart->timer, jiffies + uart->timeout); - else - /* A zero value means disable timeout feature */ - omap_uart_block_sleep(uart); - } + + uart->timeout = value * HZ; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + /* A zero value means disable timeout feature */ + omap_uart_block_sleep(uart); + return n; } -static struct kobj_attribute sleep_timeout_attr = - __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); - +DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); +#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr)) #else static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +#define DEV_CREATE_FILE(dev, attr) #endif /* CONFIG_PM */ -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, +static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = { + { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data0, + }, + }, + }, { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = serial_platform_data1, + }, + }, + }, { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = serial_platform_data2, + }, + }, }, }; void __init omap_serial_init(void) { - int i, err; + int i; const struct omap_uart_config *info; char name[16]; @@ -496,14 +568,12 @@ void __init omap_serial_init(void) if (info == NULL) return; - if (cpu_is_omap44xx()) { - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) - serial_platform_data[i].irq += 32; - } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - struct plat_serial8250_port *p = serial_platform_data + i; struct omap_uart_state *uart = &omap_uart[i]; + struct platform_device *pdev = &uart->pdev; + struct device *dev = &pdev->dev; + struct plat_serial8250_port *p = dev->platform_data; if (!(info->enabled_uarts & (1 << i))) { p->membase = NULL; @@ -531,20 +601,21 @@ void __init omap_serial_init(void) uart->num = i; p->private_data = uart; uart->p = p; - list_add(&uart->node, &uart_list); + list_add_tail(&uart->node, &uart_list); + + if (cpu_is_omap44xx()) + p->irq += 32; omap_uart_enable_clocks(uart); omap_uart_reset(uart); omap_uart_idle_init(uart); + + if (WARN_ON(platform_device_register(pdev))) + continue; + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(dev, true); + DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); + } } - - err = platform_device_register(&serial_device); - -#ifdef CONFIG_PM - if (!err) - err = sysfs_create_file(&serial_device.dev.kobj, - &sleep_timeout_attr.attr); -#endif - } - diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index f41f8d96ddba..82aa4a3d160c 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -36,7 +36,7 @@ .text -/* r4 parameters */ +/* r1 parameters */ #define SDRC_NO_UNLOCK_DLL 0x0 #define SDRC_UNLOCK_DLL 0x1 @@ -58,7 +58,6 @@ /* SDRC_POWER bit settings */ #define SRFRONIDLEREQ_MASK 0x40 -#define PWDENA_MASK 0x4 /* CM_IDLEST1_CORE bit settings */ #define ST_SDRC_MASK 0x2 @@ -71,41 +70,72 @@ /* * omap3_sram_configure_core_dpll - change DPLL3 M2 divider - * r0 = new SDRC_RFR_CTRL register contents - * r1 = new SDRC_ACTIM_CTRLA register contents - * r2 = new SDRC_ACTIM_CTRLB register contents - * r3 = new M2 divider setting (only 1 and 2 supported right now) - * r4 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for - * SDRC rates < 83MHz - * r5 = number of MPU cycles to wait for SDRC to stabilize after - * reprogramming the SDRC when switching to a slower MPU speed - * r6 = new SDRC_MR_0 register value - * r7 = increasing SDRC rate? (1 = yes, 0 = no) * + * Params passed in registers: + * r0 = new M2 divider setting (only 1 and 2 supported right now) + * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for + * SDRC rates < 83MHz + * r2 = number of MPU cycles to wait for SDRC to stabilize after + * reprogramming the SDRC when switching to a slower MPU speed + * r3 = increasing SDRC rate? (1 = yes, 0 = no) + * + * Params passed via the stack. The needed params will be copied in SRAM + * before use by the code in SRAM (SDRAM is not accessible during SDRC + * reconfiguration): + * new SDRC_RFR_CTRL_0 register contents + * new SDRC_ACTIM_CTRL_A_0 register contents + * new SDRC_ACTIM_CTRL_B_0 register contents + * new SDRC_MR_0 register value + * new SDRC_RFR_CTRL_1 register contents + * new SDRC_ACTIM_CTRL_A_1 register contents + * new SDRC_ACTIM_CTRL_B_1 register contents + * new SDRC_MR_1 register value + * + * If the param SDRC_RFR_CTRL_1 is 0, the parameters + * are not programmed into the SDRC CS1 registers */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack - ldr r4, [sp, #52] @ pull extra args off the stack - ldr r5, [sp, #56] @ load extra args from the stack - ldr r6, [sp, #60] @ load extra args from the stack - ldr r7, [sp, #64] @ load extra args from the stack + + @ pull the extra args off the stack + @ and store them in SRAM + ldr r4, [sp, #52] + str r4, omap_sdrc_rfr_ctrl_0_val + ldr r4, [sp, #56] + str r4, omap_sdrc_actim_ctrl_a_0_val + ldr r4, [sp, #60] + str r4, omap_sdrc_actim_ctrl_b_0_val + ldr r4, [sp, #64] + str r4, omap_sdrc_mr_0_val + ldr r4, [sp, #68] + str r4, omap_sdrc_rfr_ctrl_1_val + cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0, + beq skip_cs1_params @ do not use cs1 params + ldr r4, [sp, #72] + str r4, omap_sdrc_actim_ctrl_a_1_val + ldr r4, [sp, #76] + str r4, omap_sdrc_actim_ctrl_b_1_val + ldr r4, [sp, #80] + str r4, omap_sdrc_mr_1_val +skip_cs1_params: dsb @ flush buffered writes to interconnect - cmp r7, #1 @ if increasing SDRC clk rate, + + cmp r3, #1 @ if increasing SDRC clk rate, bleq configure_sdrc @ program the SDRC regs early (for RFR) - cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state + cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state bleq unlock_dll blne lock_dll bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC bl configure_core_dpll @ change the DPLL3 M2 divider + mov r12, r2 + bl wait_clk_stable @ wait for SDRC to stabilize bl enable_sdrc @ take SDRC out of idle - cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change + cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change bleq wait_dll_unlock blne wait_dll_lock - cmp r7, #1 @ if increasing SDRC clk rate, + cmp r3, #1 @ if increasing SDRC clk rate, beq return_to_sdram @ return to SDRAM code, otherwise, bl configure_sdrc @ reprogram SDRC regs now - mov r12, r5 - bl wait_clk_stable @ wait for SDRC to stabilize return_to_sdram: isb @ prevent speculative exec past here mov r0, #0 @ return value @@ -113,7 +143,7 @@ return_to_sdram: unlock_dll: ldr r11, omap3_sdrc_dlla_ctrl ldr r12, [r11] - and r12, r12, #FIXEDDELAY_MASK + bic r12, r12, #FIXEDDELAY_MASK orr r12, r12, #FIXEDDELAY_DEFAULT orr r12, r12, #DLLIDLE_MASK str r12, [r11] @ (no OCP barrier needed) @@ -129,7 +159,6 @@ sdram_in_selfrefresh: ldr r12, [r11] @ read the contents of SDRC_POWER mov r9, r12 @ keep a copy of SDRC_POWER bits orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle - bic r12, r12, #PWDENA_MASK @ clear PWDENA str r12, [r11] @ write back to SDRC_POWER register ldr r12, [r11] @ posted-write barrier for SDRC idle_sdrc: @@ -149,7 +178,7 @@ configure_core_dpll: ldr r12, [r11] ldr r10, core_m2_mask_val @ modify m2 for core dpll and r12, r12, r10 - orr r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT + orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT str r12, [r11] ldr r12, [r11] @ posted-write barrier for CM bx lr @@ -187,15 +216,34 @@ wait_dll_unlock: bne wait_dll_unlock bx lr configure_sdrc: - ldr r11, omap3_sdrc_rfr_ctrl - str r0, [r11] - ldr r11, omap3_sdrc_actim_ctrla - str r1, [r11] - ldr r11, omap3_sdrc_actim_ctrlb - str r2, [r11] + ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM + ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM + str r12, [r11] @ store + ldr r12, omap_sdrc_actim_ctrl_a_0_val + ldr r11, omap3_sdrc_actim_ctrl_a_0 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_b_0_val + ldr r11, omap3_sdrc_actim_ctrl_b_0 + str r12, [r11] + ldr r12, omap_sdrc_mr_0_val ldr r11, omap3_sdrc_mr_0 - str r6, [r11] - ldr r6, [r11] @ posted-write barrier for SDRC + str r12, [r11] + ldr r12, omap_sdrc_rfr_ctrl_1_val + cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0, + beq skip_cs1_prog @ do not program cs1 params + ldr r11, omap3_sdrc_rfr_ctrl_1 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_a_1_val + ldr r11, omap3_sdrc_actim_ctrl_a_1 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_b_1_val + ldr r11, omap3_sdrc_actim_ctrl_b_1 + str r12, [r11] + ldr r12, omap_sdrc_mr_1_val + ldr r11, omap3_sdrc_mr_1 + str r12, [r11] +skip_cs1_prog: + ldr r12, [r11] @ posted-write barrier for SDRC bx lr omap3_sdrc_power: @@ -206,14 +254,40 @@ omap3_cm_idlest1_core: .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST) omap3_cm_iclken1_core: .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1) -omap3_sdrc_rfr_ctrl: + +omap3_sdrc_rfr_ctrl_0: .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0) -omap3_sdrc_actim_ctrla: +omap3_sdrc_rfr_ctrl_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1) +omap3_sdrc_actim_ctrl_a_0: .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) -omap3_sdrc_actim_ctrlb: +omap3_sdrc_actim_ctrl_a_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1) +omap3_sdrc_actim_ctrl_b_0: .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) +omap3_sdrc_actim_ctrl_b_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1) omap3_sdrc_mr_0: .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0) +omap3_sdrc_mr_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1) +omap_sdrc_rfr_ctrl_0_val: + .word 0xDEADBEEF +omap_sdrc_rfr_ctrl_1_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_a_0_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_a_1_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_b_0_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_b_1_val: + .word 0xDEADBEEF +omap_sdrc_mr_0_val: + .word 0xDEADBEEF +omap_sdrc_mr_1_val: + .word 0xDEADBEEF + omap3_sdrc_dlla_status: .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) omap3_sdrc_dlla_ctrl: @@ -223,3 +297,4 @@ core_m2_mask_val: ENTRY(omap3_sram_configure_core_dpll_sz) .word . - omap3_sram_configure_core_dpll + diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 7936085dd758..2e9b8ccd8ec2 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -510,7 +510,7 @@ static struct db_chip db_chips[] __initdata = { } }; -static void u300_init_check_chip(void) +static void __init u300_init_check_chip(void) { u16 val; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 8277802ec859..3a7279c1ce5e 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -120,6 +120,32 @@ void show_mem(void) printk("%d pages swap cached\n", cached); } +static void __init find_node_limits(int node, struct meminfo *mi, + unsigned long *min, unsigned long *max_low, unsigned long *max_high) +{ + int i; + + *min = -1UL; + *max_low = *max_high = 0; + + for_each_nodebank(i, mi, node) { + struct membank *bank = &mi->bank[i]; + unsigned long start, end; + + start = bank_pfn_start(bank); + end = bank_pfn_end(bank); + + if (*min > start) + *min = start; + if (*max_high < end) + *max_high = end; + if (bank->highmem) + continue; + if (*max_low < end) + *max_low = end; + } +} + /* * FIXME: We really want to avoid allocating the bootmap bitmap * over the top of the initrd. Hopefully, this is located towards @@ -210,40 +236,24 @@ static inline void map_memory_bank(struct membank *bank) #endif } -static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) +static void __init bootmem_init_node(int node, struct meminfo *mi, + unsigned long start_pfn, unsigned long end_pfn) { - unsigned long start_pfn, end_pfn, boot_pfn; + unsigned long boot_pfn; unsigned int boot_pages; pg_data_t *pgdat; int i; - start_pfn = -1UL; - end_pfn = 0; - /* - * Calculate the pfn range, and map the memory banks for this node. + * Map the memory banks for this node. */ for_each_nodebank(i, mi, node) { struct membank *bank = &mi->bank[i]; - unsigned long start, end; - start = bank_pfn_start(bank); - end = bank_pfn_end(bank); - - if (start_pfn > start) - start_pfn = start; - if (end_pfn < end) - end_pfn = end; - - map_memory_bank(bank); + if (!bank->highmem) + map_memory_bank(bank); } - /* - * If there is no memory in this node, ignore it. - */ - if (end_pfn == 0) - return end_pfn; - /* * Allocate the bootmem bitmap page. */ @@ -260,7 +270,8 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) for_each_nodebank(i, mi, node) { struct membank *bank = &mi->bank[i]; - free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); + if (!bank->highmem) + free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); } @@ -269,8 +280,6 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) */ reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT); - - return end_pfn; } static void __init bootmem_reserve_initrd(int node) @@ -297,33 +306,39 @@ static void __init bootmem_reserve_initrd(int node) static void __init bootmem_free_node(int node, struct meminfo *mi) { unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; - unsigned long start_pfn, end_pfn; - pg_data_t *pgdat = NODE_DATA(node); + unsigned long min, max_low, max_high; int i; - start_pfn = pgdat->bdata->node_min_pfn; - end_pfn = pgdat->bdata->node_low_pfn; + find_node_limits(node, mi, &min, &max_low, &max_high); /* * initialise the zones within this node. */ memset(zone_size, 0, sizeof(zone_size)); - memset(zhole_size, 0, sizeof(zhole_size)); /* * The size of this node has already been determined. If we need * to do anything fancy with the allocation of this memory to the * zones, now is the time to do it. */ - zone_size[0] = end_pfn - start_pfn; + zone_size[0] = max_low - min; +#ifdef CONFIG_HIGHMEM + zone_size[ZONE_HIGHMEM] = max_high - max_low; +#endif /* * For each bank in this node, calculate the size of the holes. * holes = node_size - sum(bank_sizes_in_node) */ - zhole_size[0] = zone_size[0]; - for_each_nodebank(i, mi, node) - zhole_size[0] -= bank_pfn_size(&mi->bank[i]); + memcpy(zhole_size, zone_size, sizeof(zhole_size)); + for_each_nodebank(i, mi, node) { + int idx = 0; +#ifdef CONFIG_HIGHMEM + if (mi->bank[i].highmem) + idx = ZONE_HIGHMEM; +#endif + zhole_size[idx] -= bank_pfn_size(&mi->bank[i]); + } /* * Adjust the sizes according to any special requirements for @@ -331,13 +346,13 @@ static void __init bootmem_free_node(int node, struct meminfo *mi) */ arch_adjust_zones(node, zone_size, zhole_size); - free_area_init_node(node, zone_size, start_pfn, zhole_size); + free_area_init_node(node, zone_size, min, zhole_size); } void __init bootmem_init(void) { struct meminfo *mi = &meminfo; - unsigned long memend_pfn = 0; + unsigned long min, max_low, max_high; int node, initrd_node; /* @@ -345,11 +360,29 @@ void __init bootmem_init(void) */ initrd_node = check_initrd(mi); + max_low = max_high = 0; + /* * Run through each node initialising the bootmem allocator. */ for_each_node(node) { - unsigned long end_pfn = bootmem_init_node(node, mi); + unsigned long node_low, node_high; + + find_node_limits(node, mi, &min, &node_low, &node_high); + + if (node_low > max_low) + max_low = node_low; + if (node_high > max_high) + max_high = node_high; + + /* + * If there is no memory in this node, ignore it. + * (We can't have nodes which have no lowmem) + */ + if (node_low == 0) + continue; + + bootmem_init_node(node, mi, min, node_low); /* * Reserve any special node zero regions. @@ -362,12 +395,6 @@ void __init bootmem_init(void) */ if (node == initrd_node) bootmem_reserve_initrd(node); - - /* - * Remember the highest memory PFN. - */ - if (end_pfn > memend_pfn) - memend_pfn = end_pfn; } /* @@ -383,7 +410,7 @@ void __init bootmem_init(void) for_each_node(node) bootmem_free_node(node, mi); - high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1; + high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1; /* * This doesn't seem to be used by the Linux memory manager any @@ -393,7 +420,8 @@ void __init bootmem_init(void) * Note: max_low_pfn and max_pfn reflect the number of _pages_ in * the system, not the maximum PFN. */ - max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET; + max_low_pfn = max_low - PHYS_PFN_OFFSET; + max_pfn = max_high - PHYS_PFN_OFFSET; } static inline int free_area(unsigned long pfn, unsigned long end, char *s) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4722582b17b8..4426ee67ceca 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -687,13 +687,19 @@ __early_param("vmalloc=", early_vmalloc); static void __init sanity_check_meminfo(void) { - int i, j; + int i, j, highmem = 0; for (i = 0, j = 0; i < meminfo.nr_banks; i++) { struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; #ifdef CONFIG_HIGHMEM + if (__va(bank->start) > VMALLOC_MIN || + __va(bank->start) < (void *)PAGE_OFFSET) + highmem = 1; + + bank->highmem = highmem; + /* * Split those memory banks which are partially overlapping * the vmalloc area greatly simplifying things later. @@ -714,6 +720,7 @@ static void __init sanity_check_meminfo(void) i++; bank[1].size -= VMALLOC_MIN - __va(bank->start); bank[1].start = __pa(VMALLOC_MIN - 1) + 1; + bank[1].highmem = highmem = 1; j++; } bank->size = VMALLOC_MIN - __va(bank->start); diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 843e8af64066..1868c0d8f9b5 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -78,10 +78,10 @@ static int omap_target(struct cpufreq_policy *policy, /* Ensure desired rate is within allowed range. Some govenors * (ondemand) will just pass target_freq=0 to get the minimum. */ - if (target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - if (target_freq > policy->cpuinfo.max_freq) - target_freq = policy->cpuinfo.max_freq; + if (target_freq < policy->min) + target_freq = policy->min; + if (target_freq > policy->max) + target_freq = policy->max; freqs.old = omap_getspeed(0); freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index be4eefda4767..9395898dd49a 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -281,24 +281,27 @@ static int /* __init */ fpga_probe(struct platform_device *pdev) return 0; } -static int fpga_suspend_late(struct platform_device *pdev, pm_message_t mesg) +static int fpga_suspend_noirq(struct device *dev) { __raw_writew(~0, &fpga->leds); return 0; } -static int fpga_resume_early(struct platform_device *pdev) +static int fpga_resume_noirq(struct device *dev) { __raw_writew(~hw_led_state, &fpga->leds); return 0; } +static struct dev_pm_ops fpga_dev_pm_ops = { + .suspend_noirq = fpga_suspend_noirq, + .resume_noirq = fpga_resume_noirq, +}; static struct platform_driver led_driver = { .driver.name = "omap_dbg_led", + .driver.pm = &fpga_dev_pm_ops, .probe = fpga_probe, - .suspend_late = fpga_suspend_late, - .resume_early = fpga_resume_early, }; static int __init fpga_init(void) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 7677a4a1cef2..e3ac94f09006 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -946,7 +946,9 @@ void omap_start_dma(int lch) cur_lch = next_lch; } while (next_lch != -1); - } else if (cpu_class_is_omap2()) { + } else if (cpu_is_omap242x() || + (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) { + /* Errata: Need to write lch even if not using chaining */ dma_write(lch, CLNK_CTRL(lch)); } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 26b387c12423..50b19a3027bc 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -476,14 +476,12 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) __raw_writel(l, reg); } -static int __omap_get_gpio_datain(int gpio) +static int _get_gpio_datain(struct gpio_bank *bank, int gpio) { - struct gpio_bank *bank; void __iomem *reg; if (check_gpio(gpio) < 0) return -EINVAL; - bank = get_gpio_bank(gpio); reg = bank->base; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 @@ -524,6 +522,53 @@ static int __omap_get_gpio_datain(int gpio) & (1 << get_gpio_index(gpio))) != 0; } +static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg; + + if (check_gpio(gpio) < 0) + return -EINVAL; + reg = bank->base; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DATA_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DATAOUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP730 + case METHOD_GPIO_730: + reg += OMAP730_GPIO_DATA_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DATA_OUTPUT; + break; +#endif +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAOUT; + break; +#endif + default: + return -EINVAL; + } + + return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; +} + #define MOD_REG_BIT(reg, bit_mask, set) \ do { \ int l = __raw_readl(base + reg); \ @@ -1189,6 +1234,7 @@ static void gpio_mask_irq(unsigned int irq) struct gpio_bank *bank = get_irq_chip_data(irq); _set_gpio_irqenable(bank, gpio, 0); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); } static void gpio_unmask_irq(unsigned int irq) @@ -1196,6 +1242,11 @@ static void gpio_unmask_irq(unsigned int irq) unsigned int gpio = irq - IH_GPIO_BASE; struct gpio_bank *bank = get_irq_chip_data(irq); unsigned int irq_mask = 1 << get_gpio_index(gpio); + struct irq_desc *desc = irq_to_desc(irq); + u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK; + + if (trigger) + _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); /* For level-triggered GPIOs, the clearing must be done after * the HW source is cleared, thus after the handler has run */ @@ -1264,8 +1315,9 @@ static struct irq_chip mpuio_irq_chip = { #include -static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t mesg) +static int omap_mpuio_suspend_noirq(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct gpio_bank *bank = platform_get_drvdata(pdev); void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; unsigned long flags; @@ -1278,8 +1330,9 @@ static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t me return 0; } -static int omap_mpuio_resume_early(struct platform_device *pdev) +static int omap_mpuio_resume_noirq(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct gpio_bank *bank = platform_get_drvdata(pdev); void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; unsigned long flags; @@ -1291,14 +1344,18 @@ static int omap_mpuio_resume_early(struct platform_device *pdev) return 0; } +static struct dev_pm_ops omap_mpuio_dev_pm_ops = { + .suspend_noirq = omap_mpuio_suspend_noirq, + .resume_noirq = omap_mpuio_resume_noirq, +}; + /* use platform_driver for this, now that there's no longer any * point to sys_device (other than not disturbing old code). */ static struct platform_driver omap_mpuio_driver = { - .suspend_late = omap_mpuio_suspend_late, - .resume_early = omap_mpuio_resume_early, .driver = { .name = "mpuio", + .pm = &omap_mpuio_dev_pm_ops, }, }; @@ -1350,9 +1407,49 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset) return 0; } +static int gpio_is_input(struct gpio_bank *bank, int mask) +{ + void __iomem *reg = bank->base; + + switch (bank->method) { + case METHOD_MPUIO: + reg += OMAP_MPUIO_IO_CNTL; + break; + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DIRECTION; + break; + case METHOD_GPIO_730: + reg += OMAP730_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; + } + return __raw_readl(reg) & mask; +} + static int gpio_get(struct gpio_chip *chip, unsigned offset) { - return __omap_get_gpio_datain(chip->base + offset); + struct gpio_bank *bank; + void __iomem *reg; + int gpio; + u32 mask; + + gpio = chip->base + offset; + bank = get_gpio_bank(gpio); + reg = bank->base; + mask = 1 << get_gpio_index(gpio); + + if (gpio_is_input(bank, mask)) + return _get_gpio_datain(bank, gpio); + else + return _get_gpio_dataout(bank, gpio); } static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) @@ -1886,34 +1983,6 @@ arch_initcall(omap_gpio_sysinit); #include #include -static int gpio_is_input(struct gpio_bank *bank, int mask) -{ - void __iomem *reg = bank->base; - - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL; - break; - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; - } - return __raw_readl(reg) & mask; -} - - static int dbg_gpio_show(struct seq_file *s, void *unused) { unsigned i, j, gpio; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index f9f65e1ba3f1..4b8b0d65cbf2 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -20,6 +20,8 @@ struct clockdomain; struct clkops { int (*enable)(struct clk *); void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, u8 *); + void (*find_companion)(struct clk *, void __iomem **, u8 *); }; #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index 285eaa3a8275..11e73d9e8928 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -378,9 +378,6 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ cpu_is_omap44xx()) -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) - /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 #define OMAP2420_REV_ES1_0 0x24200024 @@ -436,5 +433,3 @@ IS_OMAP_TYPE(3430, 0x3430) int omap_chip_is(struct omap_chip_id oci); void omap2_check_revision(void); - -#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 73f483d56ca6..21fb0efdda86 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -228,7 +228,8 @@ extern void omap1_map_common_io(void); extern void omap1_init_common_hw(void); extern void omap2_map_common_io(void); -extern void omap2_init_common_hw(struct omap_sdrc_params *sp); +extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); #define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) #define __arch_iounmap(v) omap_iounmap(v) diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 85a621705766..80281c458baf 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -853,6 +853,10 @@ enum omap34xx_index { AE5_34XX_GPIO143, H19_34XX_GPIO164_OUT, J25_34XX_GPIO170, + + /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ + H16_34XX_SDRC_CKE0, + H17_34XX_SDRC_CKE1, }; struct omap_mux_cfg { diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h index 24ac3c715912..cda2a70397b4 100644 --- a/arch/arm/plat-omap/include/mach/prcm.h +++ b/arch/arm/plat-omap/include/mach/prcm.h @@ -25,6 +25,7 @@ u32 omap_prcm_get_reset_sources(void); void omap_prcm_arch_reset(char mode); +int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name); #endif diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index adc73522491f..0be18e4ff182 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -30,6 +30,10 @@ #define SDRC_ACTIM_CTRL_A_0 0x09c #define SDRC_ACTIM_CTRL_B_0 0x0a0 #define SDRC_RFR_CTRL_0 0x0a4 +#define SDRC_MR_1 0x0B4 +#define SDRC_ACTIM_CTRL_A_1 0x0C4 +#define SDRC_ACTIM_CTRL_B_1 0x0C8 +#define SDRC_RFR_CTRL_1 0x0D4 /* * These values represent the number of memory clock cycles between @@ -102,8 +106,11 @@ struct omap_sdrc_params { u32 mr; }; -void __init omap2_sdrc_init(struct omap_sdrc_params *sp); -struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r); +void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1); #ifdef CONFIG_ARCH_OMAP2 diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index 13abd02d1527..def0529c75eb 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -59,6 +59,7 @@ extern void omap_uart_check_wakeup(void); extern void omap_uart_prepare_suspend(void); extern void omap_uart_prepare_idle(int num); extern void omap_uart_resume_idle(int num); +extern void omap_uart_enable_irqs(int enable); #endif #endif diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index 4d53cc59d7a3..8974e3fc2691 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -21,11 +21,12 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); -extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f, u32 sdrc_mr, - u32 inc); +extern u32 omap3_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); @@ -59,12 +60,12 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f, u32 sdrc_mr, - u32 inc); +extern u32 omap3_sram_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); extern unsigned long omap3_sram_configure_core_dpll_sz; #endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 4ea73804d21e..5eae7876979c 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -44,9 +44,9 @@ #define OMAP2_SRAM_VA 0xe3000000 #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) #define OMAP3_SRAM_PA 0x40200000 -#define OMAP3_SRAM_VA 0xd7000000 +#define OMAP3_SRAM_VA 0xe3000000 #define OMAP3_SRAM_PUB_PA 0x40208000 -#define OMAP3_SRAM_PUB_VA 0xd7008000 +#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) #define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ #define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/ @@ -373,20 +373,26 @@ static inline int omap243x_sram_init(void) #ifdef CONFIG_ARCH_OMAP3 -static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, - u32 m2, u32 unlock_dll, - u32 f, u32 sdrc_mr, u32 inc); -u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll, - u32 f, u32 sdrc_mr, u32 inc) +static u32 (*_omap3_sram_configure_core_dpll)( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); + +u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) { BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, - sdrc_actim_ctrla, - sdrc_actim_ctrlb, m2, - unlock_dll, f, sdrc_mr, inc); + return _omap3_sram_configure_core_dpll( + m2, unlock_dll, f, inc, + sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, + sdrc_actim_ctrl_b_0, sdrc_mr_0, + sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, + sdrc_actim_ctrl_b_1, sdrc_mr_1); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c index 5b75a797b5ab..0afb217a775e 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -129,7 +129,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) /* calculate the MISCCR setting for the clock */ - if (parent == &clk_xtal) + if (parent == &clk_mpll) source = S3C2410_MISCCR_CLK0_MPLL; else if (parent == &clk_upll) source = S3C2410_MISCCR_CLK0_UPLL; diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h index 41ab85d66f33..d66d446b127c 100644 --- a/arch/ia64/include/asm/device.h +++ b/arch/ia64/include/asm/device.h @@ -15,4 +15,7 @@ struct dev_archdata { #endif }; +struct pdev_archdata { +}; + #endif /* _ASM_IA64_DEVICE_H */ diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index bd0b85ec38f5..09c32962b66f 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Fri May 22 10:02:33 2009 +# Linux kernel version: 2.6.31-rc6 +# Tue Aug 18 11:00:02 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -18,7 +18,11 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_CSUM=y +# CONFIG_PCI is not set +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -59,8 +63,8 @@ CONFIG_INITRAMFS_ROOT_GID=0 CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y -# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set +# CONFIG_INITRAMFS_COMPRESSION_NONE is not set +CONFIG_INITRAMFS_COMPRESSION_GZIP=y # CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set # CONFIG_INITRAMFS_COMPRESSION_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -71,7 +75,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -84,13 +87,22 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -102,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -194,9 +206,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Exectuable file formats @@ -262,6 +274,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -325,7 +338,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -344,7 +356,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -410,6 +422,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -418,12 +435,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set # # Multifunction device drivers @@ -433,22 +444,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -469,9 +465,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -485,12 +484,15 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -678,6 +680,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set # CONFIG_SAMPLES is not set +# CONFIG_KMEMCHECK is not set CONFIG_EARLY_PRINTK=y CONFIG_HEART_BEAT=y CONFIG_DEBUG_BOOTMEM=y @@ -793,6 +796,5 @@ CONFIG_ZLIB_INFLATE=y CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index 4ef6af0a8f31..8b638615a972 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc5 -# Mon May 11 09:01:02 2009 +# Linux kernel version: 2.6.31-rc6 +# Tue Aug 18 10:35:30 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -17,9 +17,12 @@ CONFIG_GENERIC_TIME=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_CSUM=y # CONFIG_PCI is not set -# CONFIG_NO_DMA is not set +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -64,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -76,13 +78,23 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -95,7 +107,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -156,8 +168,16 @@ CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyUL0,115200" # CONFIG_CMDLINE_FORCE is not set CONFIG_OF=y -CONFIG_OF_DEVICE=y CONFIG_PROC_DEVICETREE=y + +# +# Advanced setup +# + +# +# Default settings for advanced configuration options are used +# +CONFIG_KERNEL_START=0x90000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -169,7 +189,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # @@ -237,6 +257,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -254,7 +275,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -353,6 +378,7 @@ CONFIG_MTD_UCLINUX=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -364,6 +390,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set @@ -383,7 +410,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -402,7 +428,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -463,23 +489,25 @@ CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_XILINX_HWICAP is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set # # Multifunction device drivers @@ -489,22 +517,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -520,9 +533,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set @@ -543,9 +557,12 @@ CONFIG_USB_SUPPORT=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -558,12 +575,15 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -813,6 +833,5 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y diff --git a/arch/microblaze/include/asm/device.h b/arch/microblaze/include/asm/device.h index c042830793ed..30286db27c1c 100644 --- a/arch/microblaze/include/asm/device.h +++ b/arch/microblaze/include/asm/device.h @@ -16,6 +16,9 @@ struct dev_archdata { struct device_node *of_node; }; +struct pdev_archdata { +}; + #endif /* _ASM_MICROBLAZE_DEVICE_H */ diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h index 41e1e1aa36ac..cd1ac9aad56c 100644 --- a/arch/microblaze/include/asm/hardirq.h +++ b/arch/microblaze/include/asm/hardirq.h @@ -12,8 +12,6 @@ /* should be defined in each interrupt controller driver */ extern unsigned int get_irq(struct pt_regs *regs); -#define ack_bad_irq ack_bad_irq -void ack_bad_irq(unsigned int irq); #include #endif /* _ASM_MICROBLAZE_HARDIRQ_H */ diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index b15605299a57..6eea6f92b84e 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -130,6 +131,7 @@ void __init init_IRQ(void) if (intc) break; } + BUG_ON(!intc); intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL); intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE); diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c index f688ee93e3b9..7d5ddd62d4d2 100644 --- a/arch/microblaze/kernel/irq.c +++ b/arch/microblaze/kernel/irq.c @@ -30,15 +30,6 @@ unsigned int irq_of_parse_and_map(struct device_node *dev, int index) } EXPORT_SYMBOL_GPL(irq_of_parse_and_map); -/* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves. - */ -void ack_bad_irq(unsigned int irq) -{ - printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq); -} - static u32 concurrent_irq; void do_IRQ(struct pt_regs *regs) diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 216db817beb6..457216097dfd 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -313,7 +313,7 @@ ENTRY(sys_call_table) .long sys_fchmodat .long sys_faccessat .long sys_ni_syscall /* pselect6 */ - .long sys_ni_syscall /* sys_ppoll */ + .long sys_ppoll .long sys_unshare /* 310 */ .long sys_set_robust_list .long sys_get_robust_list diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index bdfa2f9f0c81..5499deae7fa6 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -234,6 +235,7 @@ void __init time_init(void) if (timer) break; } + BUG_ON(!timer); timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL); timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE); diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index 8d92c4efe9a4..f207f1a94dbc 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -130,13 +130,13 @@ void __init setup_memory(void) * (in case the address isn't page-aligned). */ #ifndef CONFIG_MMU - map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)), + map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn); #else map_size = init_bootmem_node(&contig_page_data, - PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn); + PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn); #endif - lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size); + lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size); /* free bootmem is whole main memory */ free_bootmem(memory_start, memory_size); diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index 96a14a426a7c..4320239cf4ef 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -32,10 +32,12 @@ #define PAGE_SIZE (1UL << PAGE_SHIFT) #define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#ifdef CONFIG_HUGETLB_PAGE #define HPAGE_SHIFT (PAGE_SHIFT + PAGE_SHIFT - 3) #define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#endif /* CONFIG_HUGETLB_PAGE */ #ifndef __ASSEMBLY__ diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h index 7d2277cef09a..e3e06e0f7fc0 100644 --- a/arch/powerpc/include/asm/device.h +++ b/arch/powerpc/include/asm/device.h @@ -30,4 +30,7 @@ dev_archdata_get_node(const struct dev_archdata *ad) return ad->of_node; } +struct pdev_archdata { +}; + #endif /* _ASM_POWERPC_DEVICE_H */ diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index c4a955d25451..2f5352c06a0e 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -219,6 +219,8 @@ config CPU_SHX3 config ARCH_SHMOBILE bool select ARCH_SUSPEND_POSSIBLE + select PM + select PM_RUNTIME if SUPERH32 @@ -396,6 +398,13 @@ config CPU_SUBTYPE_SH7724 help Select SH7724 if you have an SH-MobileR2R CPU. +config CPU_SUBTYPE_SH7757 + bool "Support SH7757 processor" + select CPU_SH4A + select CPU_SHX2 + help + Select SH7757 if you have a SH4A SH7757 CPU. + config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A @@ -758,12 +767,31 @@ config UBC_WAKEUP If unsure, say N. -config CMDLINE_BOOL - bool "Default bootloader kernel arguments" +choice + prompt "Kernel command line" + optional + default CMDLINE_OVERWRITE + help + Setting this option allows the kernel command line arguments + to be set. + +config CMDLINE_OVERWRITE + bool "Overwrite bootloader kernel arguments" + help + Given string will overwrite any arguments passed in by + a bootloader. + +config CMDLINE_EXTEND + bool "Extend bootloader kernel arguments" + help + Given string will be concatenated with arguments passed in + by a bootloader. + +endchoice config CMDLINE - string "Initial kernel command string" - depends on CMDLINE_BOOL + string "Kernel command line arguments string" + depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND default "console=ttySC1,115200" endmenu diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 741d20fab2e1..55907af1dc25 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -38,6 +38,7 @@ config EARLY_SCIF_CONSOLE_PORT default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \ CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \ CPU_SUBTYPE_SH7343 + default "0xfe4c0000" if CPU_SUBTYPE_SH7757 default "0xffeb0000" if CPU_SUBTYPE_SH7785 default "0xffeb0000" if CPU_SUBTYPE_SH7786 default "0xfffe8000" if CPU_SUBTYPE_SH7203 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index e26421bf9976..fc51a918b31a 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -137,6 +137,7 @@ machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705 machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander machdir-$(CONFIG_SH_MIGOR) += mach-migor machdir-$(CONFIG_SH_KFR2R09) += mach-kfr2r09 +machdir-$(CONFIG_SH_ECOVEC) += mach-ecovec24 machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780 machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index db04c85971ad..ee5bb200c715 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -171,6 +171,13 @@ config SH_SH7785LCR_29BIT_PHYSMAPS DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, you can access all on-board device in 29bit address mode. +config SH_SH7785LCR_PT + bool "SH7785LCR prototype board on 32-bit MMU mode" + depends on SH_SH7785LCR && 32BIT + default n + help + If you use prototype board, this option is enabled. + config SH_URQUELL bool "Urquell" depends on CPU_SUBTYPE_SH7786 @@ -200,6 +207,13 @@ config SH_KFR2R09 help "Kit For R2R for 2009" support. +config SH_ECOVEC + bool "EcoVec" + depends on CPU_SUBTYPE_SH7724 + select ARCH_REQUIRE_GPIOLIB + help + Renesas "R0P7724LC0011/21RL (EcoVec)" support. + config SH_SH7763RDP bool "SH7763RDP" depends on CPU_SUBTYPE_SH7763 diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index b9c88cc519e2..19eea4ab1ccc 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -227,6 +227,9 @@ static struct platform_device lcdc_device = { .dev = { .platform_data = &lcdc_info, }, + .archdata = { + .hwblk_id = HWBLK_LCDC, + }, }; static void camera_power(int val) @@ -377,6 +380,9 @@ static struct platform_device ceu_device = { .dev = { .platform_data = &sh_mobile_ceu_info, }, + .archdata = { + .hwblk_id = HWBLK_CEU, + }, }; struct spi_gpio_platform_data sdcard_cn3_platform_data = { diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c index 42410a15d255..726427c3522b 100644 --- a/arch/sh/boards/board-sh7785lcr.c +++ b/arch/sh/boards/board-sh7785lcr.c @@ -223,6 +223,19 @@ static struct platform_device sm501_device = { .resource = sm501_resources, }; +static struct resource i2c_proto_resources[] = { + [0] = { + .start = PCA9564_PROTO_32BIT_ADDR, + .end = PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, + }, + [1] = { + .start = 12, + .end = 12, + .flags = IORESOURCE_IRQ, + }, +}; + static struct resource i2c_resources[] = { [0] = { .start = PCA9564_ADDR, @@ -271,6 +284,11 @@ static int __init sh7785lcr_devices_setup(void) i2c_register_board_info(0, sh7785lcr_i2c_devices, ARRAY_SIZE(sh7785lcr_i2c_devices)); + if (mach_is_sh7785lcr_pt()) { + i2c_device.resource = &i2c_proto_resources; + i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources); + } + return platform_add_devices(sh7785lcr_devices, ARRAY_SIZE(sh7785lcr_devices)); } diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile new file mode 100644 index 000000000000..51f852151655 --- /dev/null +++ b/arch/sh/boards/mach-ecovec24/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the R0P7724LC0011/21RL (EcoVec) +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +obj-y := setup.o \ No newline at end of file diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c new file mode 100644 index 000000000000..428d1187ce5c --- /dev/null +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -0,0 +1,516 @@ +/* + * Copyright (C) 2009 Renesas Solutions Corp. + * + * Kuninori Morimoto + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include