mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
ASoC: codecs: ES8326: Fix power-up sequence
Old power-up sequence causes large pop noise during start-up. Using a new sequence instead. Also, the registers are now reset to default value in suspend function. Signed-off-by: Zhu Ning <zhuning0077@gmail.com> Link: https://lore.kernel.org/r/20230717033223.42506-3-zhuning0077@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
f1230a27c1
commit
ac20a73d76
@ -638,40 +638,77 @@ out:
|
||||
static int es8326_resume(struct snd_soc_component *component)
|
||||
{
|
||||
struct es8326_priv *es8326 = snd_soc_component_get_drvdata(component);
|
||||
unsigned int reg;
|
||||
|
||||
regcache_cache_only(es8326->regmap, false);
|
||||
regcache_sync(es8326->regmap);
|
||||
|
||||
regmap_write(es8326->regmap, ES8326_CLK_CTL, ES8326_CLK_ON);
|
||||
/* Two channel ADC */
|
||||
regmap_write(es8326->regmap, ES8326_PULLUP_CTL, 0x02);
|
||||
regmap_write(es8326->regmap, ES8326_CLK_INV, 0x00);
|
||||
regmap_write(es8326->regmap, ES8326_CLK_DIV_CPC, 0x1F);
|
||||
regmap_write(es8326->regmap, ES8326_CLK_VMIDS1, 0xC8);
|
||||
regmap_write(es8326->regmap, ES8326_CLK_VMIDS2, 0x88);
|
||||
regmap_write(es8326->regmap, ES8326_CLK_CAL_TIME, 0x20);
|
||||
regmap_write(es8326->regmap, ES8326_SYS_BIAS, 0x08);
|
||||
regmap_write(es8326->regmap, ES8326_DAC2HPMIX, 0x22);
|
||||
regmap_write(es8326->regmap, ES8326_ADC1_SRC, es8326->mic1_src);
|
||||
regmap_write(es8326->regmap, ES8326_ADC2_SRC, es8326->mic2_src);
|
||||
/* reset internal clock state */
|
||||
regmap_write(es8326->regmap, ES8326_RESET, 0x1f);
|
||||
regmap_write(es8326->regmap, ES8326_VMIDSEL, 0x0E);
|
||||
usleep_range(10000, 15000);
|
||||
regmap_write(es8326->regmap, ES8326_HPJACK_TIMER, 0x88);
|
||||
regmap_write(es8326->regmap, ES8326_HPDET_TYPE,
|
||||
ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol);
|
||||
regmap_write(es8326->regmap, ES8326_INT_SOURCE, es8326->interrupt_src);
|
||||
regmap_write(es8326->regmap, ES8326_INTOUT_IO, es8326->interrupt_clk);
|
||||
regmap_write(es8326->regmap, ES8326_RESET, ES8326_CSM_ON);
|
||||
snd_soc_component_update_bits(component, ES8326_PGAGAIN,
|
||||
ES8326_MIC_SEL_MASK, ES8326_MIC1_SEL);
|
||||
/* set headphone default type and detect pin */
|
||||
regmap_write(es8326->regmap, ES8326_HPDET_TYPE, 0x81);
|
||||
regmap_write(es8326->regmap, ES8326_CLK_RESAMPLE, 0x05);
|
||||
|
||||
regmap_read(es8326->regmap, ES8326_CHIP_VERSION, ®);
|
||||
if ((reg & ES8326_VERSION_B) == 1) {
|
||||
regmap_write(es8326->regmap, ES8326_ANA_MICBIAS, 0xDD);
|
||||
regmap_write(es8326->regmap, ES8326_ANA_VSEL, 0x7F);
|
||||
regmap_write(es8326->regmap, ES8326_VMIDLOW, 0x0F);
|
||||
/* enable button detect */
|
||||
regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xA0);
|
||||
}
|
||||
/* set internal oscillator as clock source of headpone cp */
|
||||
regmap_write(es8326->regmap, ES8326_CLK_DIV_CPC, 0x84);
|
||||
regmap_write(es8326->regmap, ES8326_CLK_CTL, ES8326_CLK_ON);
|
||||
/* clock manager reset release */
|
||||
regmap_write(es8326->regmap, ES8326_RESET, 0x17);
|
||||
/* set headphone detection as half scan mode */
|
||||
regmap_write(es8326->regmap, ES8326_HP_MISC, 0x08);
|
||||
regmap_write(es8326->regmap, ES8326_PULLUP_CTL, 0x00);
|
||||
|
||||
/* enable headphone driver */
|
||||
regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xa7);
|
||||
usleep_range(2000, 5000);
|
||||
regmap_write(es8326->regmap, ES8326_HP_DRIVER_REF, 0xab);
|
||||
usleep_range(2000, 5000);
|
||||
regmap_write(es8326->regmap, ES8326_HP_DRIVER_REF, 0xbb);
|
||||
usleep_range(2000, 5000);
|
||||
regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xa1);
|
||||
|
||||
regmap_write(es8326->regmap, ES8326_CLK_INV, 0x00);
|
||||
regmap_write(es8326->regmap, ES8326_CLK_VMIDS1, 0xc4);
|
||||
regmap_write(es8326->regmap, ES8326_CLK_VMIDS2, 0x81);
|
||||
regmap_write(es8326->regmap, ES8326_CLK_CAL_TIME, 0x00);
|
||||
|
||||
/* turn off headphone out */
|
||||
regmap_write(es8326->regmap, ES8326_HP_CAL, 0x00);
|
||||
/* set ADC and DAC in low power mode */
|
||||
regmap_write(es8326->regmap, ES8326_ANA_LP, 0xf0);
|
||||
|
||||
/* force micbias on */
|
||||
regmap_write(es8326->regmap, ES8326_ANA_MICBIAS, 0x4f);
|
||||
regmap_write(es8326->regmap, ES8326_SYS_BIAS, 0x08);
|
||||
regmap_write(es8326->regmap, ES8326_ANA_VSEL, 0x7F);
|
||||
/* select vdda as micbias source */
|
||||
regmap_write(es8326->regmap, ES8326_VMIDLOW, 0x23);
|
||||
/* set dac dsmclip = 1 */
|
||||
regmap_write(es8326->regmap, ES8326_DAC_DSM, 0x08);
|
||||
regmap_write(es8326->regmap, ES8326_DAC_VPPSCALE, 0x15);
|
||||
|
||||
regmap_write(es8326->regmap, ES8326_INT_SOURCE,
|
||||
(ES8326_INT_SRC_PIN9 | ES8326_INT_SRC_BUTTON));
|
||||
regmap_write(es8326->regmap, ES8326_INTOUT_IO,
|
||||
es8326->interrupt_clk);
|
||||
regmap_write(es8326->regmap, ES8326_SDINOUT1_IO,
|
||||
(ES8326_IO_DMIC_CLK << ES8326_SDINOUT1_SHIFT));
|
||||
regmap_write(es8326->regmap, ES8326_SDINOUT23_IO, ES8326_IO_INPUT);
|
||||
|
||||
regmap_write(es8326->regmap, ES8326_ANA_PDN, 0x3b);
|
||||
regmap_write(es8326->regmap, ES8326_RESET, ES8326_CSM_ON);
|
||||
regmap_update_bits(es8326->regmap, ES8326_PGAGAIN, ES8326_MIC_SEL_MASK,
|
||||
ES8326_MIC1_SEL);
|
||||
|
||||
regmap_update_bits(es8326->regmap, ES8326_DAC_MUTE, ES8326_MUTE_MASK,
|
||||
ES8326_MUTE);
|
||||
|
||||
regmap_write(es8326->regmap, ES8326_HPDET_TYPE, 0x80 |
|
||||
((es8326->version == ES8326_VERSION_B) ?
|
||||
(ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol) :
|
||||
(ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol | 0x04)));
|
||||
|
||||
es8326_irq(es8326->irq, es8326);
|
||||
return 0;
|
||||
@ -688,6 +725,10 @@ static int es8326_suspend(struct snd_soc_component *component)
|
||||
regcache_cache_only(es8326->regmap, true);
|
||||
regcache_mark_dirty(es8326->regmap);
|
||||
|
||||
/* reset register value to default */
|
||||
regmap_write(es8326->regmap, ES8326_CSM_I2C_STA, 0x01);
|
||||
usleep_range(1000, 3000);
|
||||
regmap_write(es8326->regmap, ES8326_CSM_I2C_STA, 0x00);
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -717,7 +758,7 @@ static int es8326_probe(struct snd_soc_component *component)
|
||||
ret = device_property_read_u8(component->dev, "everest,jack-pol", &es8326->jack_pol);
|
||||
if (ret != 0) {
|
||||
dev_dbg(component->dev, "jack-pol return %d", ret);
|
||||
es8326->jack_pol = ES8326_HP_DET_BUTTON_POL | ES8326_HP_TYPE_OMTP;
|
||||
es8326->jack_pol = ES8326_HP_TYPE_AUTO;
|
||||
}
|
||||
dev_dbg(component->dev, "jack-pol %x", es8326->jack_pol);
|
||||
|
||||
|
@ -160,6 +160,13 @@
|
||||
#define ES8326_HP_TYPE_AUTO (1 << 0)
|
||||
#define ES8326_HP_TYPE_AUTO_INV (0 << 0)
|
||||
|
||||
/* ES8326_INT_SOURCE */
|
||||
#define ES8326_INT_SRC_DAC_MOZ (1 << 0)
|
||||
#define ES8326_INT_SRC_ADC_MOZ (1 << 1)
|
||||
#define ES8326_INT_SRC_BUTTON (1 << 2)
|
||||
#define ES8326_INT_SRC_PIN9 (1 << 3)
|
||||
#define ES8326_INT_SRC_PIN27 (1 << 4)
|
||||
|
||||
/* ES8326_SDINOUT1_IO */
|
||||
#define ES8326_IO_INPUT (0 << 0)
|
||||
#define ES8326_IO_SDIN_SLOT0 (1 << 0)
|
||||
@ -183,6 +190,7 @@
|
||||
#define ES8326_HPBUTTON_FLAG (1 << 0)
|
||||
|
||||
/* ES8326_CHIP_VERSION 0xFF */
|
||||
#define ES8326_VERSION_B (1 << 0)
|
||||
#define ES8326_VERSION (1 << 0)
|
||||
#define ES8326_VERSION_B (3 << 0)
|
||||
|
||||
#endif
|
||||
|
Loading…
Reference in New Issue
Block a user