mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-23 20:24:12 +08:00
Automated merge of kernel.org:/home/rmk/linux-2.6-rmk.git
This commit is contained in:
Linus Torvalds
commit
ab2fd30b66
@ -18,6 +18,11 @@
|
||||
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
|
||||
#ifdef CONFIG_PXA27x // workaround for Errata 50
|
||||
#define MDREFR_KDIV 0x200a4000 // all banks
|
||||
#define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0
|
||||
#endif
|
||||
|
||||
.text
|
||||
|
||||
/*
|
||||
@ -28,7 +33,9 @@
|
||||
|
||||
ENTRY(pxa_cpu_suspend)
|
||||
|
||||
#ifndef CONFIG_IWMMXT
|
||||
mra r2, r3, acc0
|
||||
#endif
|
||||
stmfd sp!, {r2 - r12, lr} @ save registers on stack
|
||||
|
||||
@ get coprocessor registers
|
||||
@ -61,14 +68,23 @@ ENTRY(pxa_cpu_suspend)
|
||||
@ prepare value for sleep mode
|
||||
mov r1, #3 @ sleep mode
|
||||
|
||||
@ prepare to put SDRAM into self-refresh manually
|
||||
ldr r4, =MDREFR
|
||||
ldr r5, [r4]
|
||||
orr r5, r5, #MDREFR_SLFRSH
|
||||
|
||||
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
|
||||
mov r2, #UNCACHED_PHYS_0
|
||||
|
||||
@ prepare SDRAM refresh settings
|
||||
ldr r4, =MDREFR
|
||||
ldr r5, [r4]
|
||||
|
||||
@ enable SDRAM self-refresh mode
|
||||
orr r5, r5, #MDREFR_SLFRSH
|
||||
|
||||
#ifdef CONFIG_PXA27x
|
||||
@ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
|
||||
ldr r6, =MDREFR_KDIV
|
||||
orr r5, r5, r6
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PXA25x
|
||||
@ Intel PXA255 Specification Update notes problems
|
||||
@ about suspending with PXBus operating above 133MHz
|
||||
@ (see Errata 31, GPIO output signals, ... unpredictable in sleep
|
||||
@ -100,6 +116,18 @@ ENTRY(pxa_cpu_suspend)
|
||||
mov r0, #0
|
||||
mcr p14, 0, r0, c6, c0, 0
|
||||
orr r0, r0, #2 @ initiate change bit
|
||||
#endif
|
||||
#ifdef CONFIG_PXA27x
|
||||
@ Intel PXA270 Specification Update notes problems sleeping
|
||||
@ with core operating above 91 MHz
|
||||
@ (see Errata 50, ...processor does not exit from sleep...)
|
||||
|
||||
ldr r6, =CCCR
|
||||
ldr r8, [r6] @ keep original value for resume
|
||||
|
||||
ldr r7, =CCCR_SLEEP @ prepare CCCR sleep value
|
||||
mov r0, #0x2 @ prepare value for CLKCFG
|
||||
#endif
|
||||
|
||||
@ align execution to a cache line
|
||||
b 1f
|
||||
@ -111,6 +139,7 @@ ENTRY(pxa_cpu_suspend)
|
||||
@ All needed values are now in registers.
|
||||
@ These last instructions should be in cache
|
||||
|
||||
#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
|
||||
@ initiate the frequency change...
|
||||
str r7, [r6]
|
||||
mcr p14, 0, r0, c6, c0, 0
|
||||
@ -118,14 +147,27 @@ ENTRY(pxa_cpu_suspend)
|
||||
@ restore the original cpu speed value for resume
|
||||
str r8, [r6]
|
||||
|
||||
@ put SDRAM into self-refresh
|
||||
str r5, [r4]
|
||||
@ need 6 13-MHz cycles before changing PWRMODE
|
||||
@ just set frequency to 91-MHz... 6*91/13 = 42
|
||||
|
||||
mov r0, #42
|
||||
10: subs r0, r0, #1
|
||||
bne 10b
|
||||
#endif
|
||||
|
||||
@ Do not reorder...
|
||||
@ Intel PXA270 Specification Update notes problems performing
|
||||
@ external accesses after SDRAM is put in self-refresh mode
|
||||
@ (see Errata 39 ...hangs when entering self-refresh mode)
|
||||
|
||||
@ force address lines low by reading at physical address 0
|
||||
ldr r3, [r2]
|
||||
|
||||
@ put SDRAM into self-refresh
|
||||
str r5, [r4]
|
||||
|
||||
@ enter sleep mode
|
||||
mcr p14, 0, r1, c7, c0, 0
|
||||
mcr p14, 0, r1, c7, c0, 0 @ PWRMODE
|
||||
|
||||
20: b 20b @ loop waiting for sleep
|
||||
|
||||
@ -188,7 +230,9 @@ resume_after_mmu:
|
||||
bl cpu_xscale_proc_init
|
||||
#endif
|
||||
ldmfd sp!, {r2, r3}
|
||||
#ifndef CONFIG_IWMMXT
|
||||
mar acc0, r2, r3
|
||||
#endif
|
||||
ldmfd sp!, {r4 - r12, pc} @ return to caller
|
||||
|
||||
|
||||
|
||||
@ -14,6 +14,7 @@
|
||||
* 26-06-2003 BJD Finished off definitions for register addresses
|
||||
* 12-03-2004 BJD Updated include protection
|
||||
* 07-03-2005 BJD Added FIFO size flags and S3C2440 MPLL
|
||||
* 05-04-2005 LCVR Added IISFCON definitions for the S3C2400
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_REGS_IIS_H
|
||||
@ -68,5 +69,14 @@
|
||||
#define S3C2410_IISFCON_RXMASK (0x3f)
|
||||
#define S3C2410_IISFCON_RXSHIFT (0)
|
||||
|
||||
#define S3C2400_IISFCON_TXDMA (1<<11)
|
||||
#define S3C2400_IISFCON_RXDMA (1<<10)
|
||||
#define S3C2400_IISFCON_TXENABLE (1<<9)
|
||||
#define S3C2400_IISFCON_RXENABLE (1<<8)
|
||||
#define S3C2400_IISFCON_TXMASK (0x07 << 4)
|
||||
#define S3C2400_IISFCON_TXSHIFT (4)
|
||||
#define S3C2400_IISFCON_RXMASK (0x07)
|
||||
#define S3C2400_IISFCON_RXSHIFT (0)
|
||||
|
||||
#define S3C2410_IISFIFO (0x10)
|
||||
#endif /* __ASM_ARCH_REGS_IIS_H */
|
||||
|
||||
@ -12,6 +12,7 @@
|
||||
* Changelog:
|
||||
* 29-Sep-2004 BJD Initial include for Linux
|
||||
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
|
||||
* 04-Apr-2005 LCVR Added S3C2400 DRAM/BANKSIZE_MASK definitions
|
||||
*
|
||||
*/
|
||||
|
||||
@ -183,6 +184,12 @@
|
||||
#define S3C2410_REFRESH_TRP_3clk (1<<20)
|
||||
#define S3C2410_REFRESH_TRP_4clk (2<<20)
|
||||
|
||||
#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20)
|
||||
#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
|
||||
#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
|
||||
#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
|
||||
#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
|
||||
|
||||
#define S3C2410_REFRESH_TSRC_MASK (3<<18)
|
||||
#define S3C2410_REFRESH_TSRC_4clk (0<<18)
|
||||
#define S3C2410_REFRESH_TSRC_5clk (1<<18)
|
||||
@ -205,6 +212,7 @@
|
||||
#define S3C2410_BANKSIZE_4M (0x5 << 0)
|
||||
#define S3C2410_BANKSIZE_2M (0x4 << 0)
|
||||
#define S3C2410_BANKSIZE_MASK (0x7 << 0)
|
||||
#define S3C2400_BANKSIZE_MASK (0x4 << 0)
|
||||
#define S3C2410_BANKSIZE_SCLK_EN (1<<4)
|
||||
#define S3C2410_BANKSIZE_SCKE_EN (1<<5)
|
||||
#define S3C2410_BANKSIZE_BURST (1<<7)
|
||||
|
||||
@ -12,6 +12,7 @@
|
||||
* 20-04-2004 KF Created file
|
||||
* 04-10-2004 BJD Removed VA address (no longer mapped)
|
||||
* tidied file for submission
|
||||
* 03-04-2005 LCVR Added S3C2400_SPPIN_nCS definition
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_REGS_SPI_H
|
||||
@ -46,6 +47,7 @@
|
||||
|
||||
#define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */
|
||||
#define S3C2410_SPPIN_RESERVED (1<<1)
|
||||
#define S3C2400_SPPIN_nCS (1<<1) /* SPI Card Select */
|
||||
#define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */
|
||||
|
||||
|
||||
|
||||
@ -16,6 +16,7 @@
|
||||
* 12-Oct-2004 BJD Take account of debug uart configuration
|
||||
* 15-Nov-2004 BJD Fixed uart configuration
|
||||
* 22-Feb-2005 BJD Added watchdog to uncompress
|
||||
* 04-Apr-2005 LCVR Added support to S3C2400 (no cpuid at GSTATUS1)
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_UNCOMPRESS_H
|
||||
@ -69,9 +70,12 @@ uart_rd(unsigned int reg)
|
||||
static void
|
||||
putc(char ch)
|
||||
{
|
||||
int cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
|
||||
int cpuid = S3C2410_GSTATUS1_2410;
|
||||
|
||||
#ifndef CONFIG_CPU_S3C2400
|
||||
cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
|
||||
cpuid &= S3C2410_GSTATUS1_IDMASK;
|
||||
#endif
|
||||
|
||||
if (ch == '\n')
|
||||
putc('\r'); /* expand newline to \r\n */
|
||||
|
||||
@ -29,15 +29,22 @@ extern void __memzero(void *ptr, __kernel_size_t n);
|
||||
|
||||
#define memset(p,v,n) \
|
||||
({ \
|
||||
if ((n) != 0) { \
|
||||
void *__p = (p); size_t __n = n; \
|
||||
if ((__n) != 0) { \
|
||||
if (__builtin_constant_p((v)) && (v) == 0) \
|
||||
__memzero((p),(n)); \
|
||||
__memzero((__p),(__n)); \
|
||||
else \
|
||||
memset((p),(v),(n)); \
|
||||
memset((__p),(v),(__n)); \
|
||||
} \
|
||||
(p); \
|
||||
(__p); \
|
||||
})
|
||||
|
||||
#define memzero(p,n) ({ if ((n) != 0) __memzero((p),(n)); (p); })
|
||||
#define memzero(p,n) \
|
||||
({ \
|
||||
void *__p = (p); size_t __n = n; \
|
||||
if ((__n) != 0) \
|
||||
__memzero((__p),(__n)); \
|
||||
(__p); \
|
||||
})
|
||||
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user