spi: spidev: Align buffers for DMA

Simply copying all xfers from userspace into one bounce buffer causes
alignment problems if the SPI controller uses DMA.

Ensure that all transfer data blocks within the rx and tx bounce buffers
are aligned for DMA (according to ARCH_KMALLOC_MINALIGN).

Alignment may increase the usage of the bounce buffers. In some cases,
the buffers may need to be increased using the "bufsiz" module
parameter.

Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Christian Eggers 2020-07-28 12:08:32 +02:00 committed by Mark Brown
parent cfd97f94d0
commit aa9e862d7d
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0

View File

@ -224,6 +224,11 @@ static int spidev_message(struct spidev_data *spidev,
for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
n;
n--, k_tmp++, u_tmp++) {
/* Ensure that also following allocations from rx_buf/tx_buf will meet
* DMA alignment requirements.
*/
unsigned int len_aligned = ALIGN(u_tmp->len, ARCH_KMALLOC_MINALIGN);
k_tmp->len = u_tmp->len;
total += k_tmp->len;
@ -239,17 +244,17 @@ static int spidev_message(struct spidev_data *spidev,
if (u_tmp->rx_buf) {
/* this transfer needs space in RX bounce buffer */
rx_total += k_tmp->len;
rx_total += len_aligned;
if (rx_total > bufsiz) {
status = -EMSGSIZE;
goto done;
}
k_tmp->rx_buf = rx_buf;
rx_buf += k_tmp->len;
rx_buf += len_aligned;
}
if (u_tmp->tx_buf) {
/* this transfer needs space in TX bounce buffer */
tx_total += k_tmp->len;
tx_total += len_aligned;
if (tx_total > bufsiz) {
status = -EMSGSIZE;
goto done;
@ -259,7 +264,7 @@ static int spidev_message(struct spidev_data *spidev,
(uintptr_t) u_tmp->tx_buf,
u_tmp->len))
goto done;
tx_buf += k_tmp->len;
tx_buf += len_aligned;
}
k_tmp->cs_change = !!u_tmp->cs_change;
@ -293,16 +298,16 @@ static int spidev_message(struct spidev_data *spidev,
goto done;
/* copy any rx data out of bounce buffer */
rx_buf = spidev->rx_buffer;
for (n = n_xfers, u_tmp = u_xfers; n; n--, u_tmp++) {
for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
n;
n--, k_tmp++, u_tmp++) {
if (u_tmp->rx_buf) {
if (copy_to_user((u8 __user *)
(uintptr_t) u_tmp->rx_buf, rx_buf,
(uintptr_t) u_tmp->rx_buf, k_tmp->rx_buf,
u_tmp->len)) {
status = -EFAULT;
goto done;
}
rx_buf += u_tmp->len;
}
}
status = total;