korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-02 16:44:10 +08:00
Code Issues Packages Projects Releases Wiki Activity

net: systemport: Fix coalescing settings handling

Browse Source 
There were a number of issues with setting the RX coalescing parameters:

- we would not be preserving values that would have been configured
  across close/open calls, instead we would always reset to no timeout
  and 1 interrupt per packet, this would also prevent DIM from setting its
  default usec/pkts values

- when adaptive RX would be turned on, we woud not be fetching the
  default parameters, we would stay with no timeout/1 packet per
  interrupt until the estimator kicks in and changes that

- finally disabling adaptive RX coalescing while providing parameters
  would not be honored, and we would stay with whatever DIM had
  previously determined instead of the user requested parameters

Fixes: b6e0e87542 ("net: systemport: Implement adaptive interrupt coalescing")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Florian Fainelli 2018-03-28 15:15:37 -07:00 committed by David S. Miller
parent fd41f2bfb7
commit a8cdfbdf88
2 changed files with 46 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

62
drivers/net/ethernet/broadcom/bcmsysport.c
View File

@ -574,16 +574,16 @@ static int bcm_sysport_set_wol(struct net_device *dev,
return 0;
}
static void bcm_sysport_set_rx_coalesce(struct bcm_sysport_priv *priv)
static void bcm_sysport_set_rx_coalesce(struct bcm_sysport_priv *priv,
u32 usecs, u32 pkts)
{
u32 reg;
reg = rdma_readl(priv, RDMA_MBDONE_INTR);
reg &= ~(RDMA_INTR_THRESH_MASK |
RDMA_TIMEOUT_MASK << RDMA_TIMEOUT_SHIFT);
reg |= priv->dim.coal_pkts;
reg |= DIV_ROUND_UP(priv->dim.coal_usecs * 1000, 8192) <<
RDMA_TIMEOUT_SHIFT;
reg |= pkts;
reg |= DIV_ROUND_UP(usecs * 1000, 8192) << RDMA_TIMEOUT_SHIFT;
rdma_writel(priv, reg, RDMA_MBDONE_INTR);
}
@ -626,6 +626,8 @@ static int bcm_sysport_set_coalesce(struct net_device *dev,
struct ethtool_coalesce *ec)
{
struct bcm_sysport_priv *priv = netdev_priv(dev);
struct net_dim_cq_moder moder;
u32 usecs, pkts;
unsigned int i;
/* Base system clock is 125Mhz, DMA timeout is this reference clock
@ -646,15 +648,21 @@ static int bcm_sysport_set_coalesce(struct net_device *dev,
for (i = 0; i < dev->num_tx_queues; i++)
bcm_sysport_set_tx_coalesce(&priv->tx_rings[i], ec);
priv->dim.coal_usecs = ec->rx_coalesce_usecs;
priv->dim.coal_pkts = ec->rx_max_coalesced_frames;
priv->rx_coalesce_usecs = ec->rx_coalesce_usecs;
priv->rx_max_coalesced_frames = ec->rx_max_coalesced_frames;
usecs = priv->rx_coalesce_usecs;
pkts = priv->rx_max_coalesced_frames;
if (!ec->use_adaptive_rx_coalesce && priv->dim.use_dim) {
priv->dim.coal_pkts = 1;
priv->dim.coal_usecs = 0;
if (ec->use_adaptive_rx_coalesce && !priv->dim.use_dim) {
moder = net_dim_get_def_profile(priv->dim.dim.mode);
usecs = moder.usec;
pkts = moder.pkts;
}
priv->dim.use_dim = ec->use_adaptive_rx_coalesce;
bcm_sysport_set_rx_coalesce(priv);
/* Apply desired coalescing parameters */
bcm_sysport_set_rx_coalesce(priv, usecs, pkts);
return 0;
}
@ -1058,10 +1066,7 @@ static void bcm_sysport_dim_work(struct work_struct *work)
struct net_dim_cq_moder cur_profile =
net_dim_get_profile(dim->mode, dim->profile_ix);
priv->dim.coal_usecs = cur_profile.usec;
priv->dim.coal_pkts = cur_profile.pkts;
bcm_sysport_set_rx_coalesce(priv);
bcm_sysport_set_rx_coalesce(priv, cur_profile.usec, cur_profile.pkts);
dim->state = NET_DIM_START_MEASURE;
}
@ -1408,9 +1413,11 @@ out:
phy_print_status(phydev);
}
static void bcm_sysport_init_dim(struct bcm_sysport_net_dim *dim,
static void bcm_sysport_init_dim(struct bcm_sysport_priv *priv,
void (*cb)(struct work_struct *work))
{
struct bcm_sysport_net_dim *dim = &priv->dim;
INIT_WORK(&dim->dim.work, cb);
dim->dim.mode = NET_DIM_CQ_PERIOD_MODE_START_FROM_EQE;
dim->event_ctr = 0;
@ -1418,6 +1425,25 @@ static void bcm_sysport_init_dim(struct bcm_sysport_net_dim *dim,
dim->bytes = 0;
}
static void bcm_sysport_init_rx_coalesce(struct bcm_sysport_priv *priv)
{
struct bcm_sysport_net_dim *dim = &priv->dim;
struct net_dim_cq_moder moder;
u32 usecs, pkts;
usecs = priv->rx_coalesce_usecs;
pkts = priv->rx_max_coalesced_frames;
/* If DIM was enabled, re-apply default parameters */
if (dim->use_dim) {
moder = net_dim_get_def_profile(dim->dim.mode);
usecs = moder.usec;
pkts = moder.pkts;
}
bcm_sysport_set_rx_coalesce(priv, usecs, pkts);
}
static int bcm_sysport_init_tx_ring(struct bcm_sysport_priv *priv,
unsigned int index)
{
@ -1658,8 +1684,6 @@ static int bcm_sysport_init_rx_ring(struct bcm_sysport_priv *priv)
rdma_writel(priv, 0, RDMA_END_ADDR_HI);
rdma_writel(priv, priv->num_rx_desc_words - 1, RDMA_END_ADDR_LO);
rdma_writel(priv, 1, RDMA_MBDONE_INTR);
netif_dbg(priv, hw, priv->netdev,
"RDMA cfg, num_rx_bds=%d, rx_bds=%p\n",
priv->num_rx_bds, priv->rx_bds);
@ -1827,7 +1851,8 @@ static void bcm_sysport_netif_start(struct net_device *dev)
struct bcm_sysport_priv *priv = netdev_priv(dev);
/* Enable NAPI */
bcm_sysport_init_dim(&priv->dim, bcm_sysport_dim_work);
bcm_sysport_init_dim(priv, bcm_sysport_dim_work);
bcm_sysport_init_rx_coalesce(priv);
napi_enable(&priv->napi);
/* Enable RX interrupt and TX ring full interrupt */
@ -2333,6 +2358,7 @@ static int bcm_sysport_probe(struct platform_device *pdev)
/* libphy will adjust the link state accordingly */
netif_carrier_off(dev);
priv->rx_max_coalesced_frames = 1;
u64_stats_init(&priv->syncp);
priv->dsa_notifier.notifier_call = bcm_sysport_dsa_notifier;

4
drivers/net/ethernet/broadcom/bcmsysport.h
View File

@ -701,8 +701,6 @@ struct bcm_sysport_net_dim {
u16 event_ctr;
unsigned long packets;
unsigned long bytes;
u32 coal_usecs;
u32 coal_pkts;
struct net_dim dim;
};
@ -755,6 +753,8 @@ struct bcm_sysport_priv {
unsigned int rx_c_index;
struct bcm_sysport_net_dim dim;
u32 rx_max_coalesced_frames;
u32 rx_coalesce_usecs;
/* PHY device */
struct device_node *phy_dn;