clocksource: Add NPS400 timers driver

Add internal tick generator which is shared by all cores.
Each cluster of cores view it through dedicated address.
This is used for SMP system where all CPUs synced by same
clock source.

Signed-off-by: Noam Camus <noamc@ezchip.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This commit is contained in:
Noam Camus 2015-10-17 22:37:30 +03:00 committed by Vineet Gupta
parent ebc326be87
commit a53224577e
4 changed files with 124 additions and 0 deletions

View File

@ -0,0 +1,15 @@
NPS Network Processor
Required properties:
- compatible : should be "ezchip,nps400-timer"
Clocks required for compatible = "ezchip,nps400-timer":
- clocks : Must contain a single entry describing the clock input
Example:
timer {
compatible = "ezchip,nps400-timer";
clocks = <&sysclk>;
};

View File

@ -181,6 +181,16 @@ config CLKSRC_TI_32K
This option enables support for Texas Instruments 32.768 Hz clocksource
available on many OMAP-like platforms.
config CLKSRC_NPS
bool "NPS400 clocksource driver" if COMPILE_TEST
depends on !PHYS_ADDR_T_64BIT
select CLKSRC_MMIO
select CLKSRC_OF if OF
help
NPS400 clocksource support.
Got 64 bit counter with update rate up to 1000MHz.
This counter is accessed via couple of 32 bit memory mapped registers.
config CLKSRC_STM32
bool "Clocksource for STM32 SoCs" if !ARCH_STM32
depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)

View File

@ -46,6 +46,7 @@ obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o
obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o

View File

@ -0,0 +1,98 @@
/*
* Copyright (c) 2016, Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/interrupt.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/cpu.h>
#include <soc/nps/common.h>
#define NPS_MSU_TICK_LOW 0xC8
#define NPS_CLUSTER_OFFSET 8
#define NPS_CLUSTER_NUM 16
/* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */
static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
static unsigned long nps_timer_rate;
static cycle_t nps_clksrc_read(struct clocksource *clksrc)
{
int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
}
static void __init nps_setup_clocksource(struct device_node *node,
struct clk *clk)
{
int ret, cluster;
for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
nps_msu_reg_low_addr[cluster] =
nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
ret = clk_prepare_enable(clk);
if (ret) {
pr_err("Couldn't enable parent clock\n");
return;
}
nps_timer_rate = clk_get_rate(clk);
ret = clocksource_mmio_init(nps_msu_reg_low_addr, "EZnps-tick",
nps_timer_rate, 301, 32, nps_clksrc_read);
if (ret) {
pr_err("Couldn't register clock source.\n");
clk_disable_unprepare(clk);
}
}
static void __init nps_timer_init(struct device_node *node)
{
struct clk *clk;
clk = of_clk_get(node, 0);
if (IS_ERR(clk)) {
pr_err("Can't get timer clock.\n");
return;
}
nps_setup_clocksource(node, clk);
}
CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
nps_timer_init);