thermal/drivers/cpu_cooling: Introduce the cpu idle cooling driver

The cpu idle cooling device offers a new method to cool down a CPU by
injecting idle cycles at runtime.

It has some similarities with the intel power clamp driver but it is
actually designed to be more generic and relying on the idle injection
powercap framework.

The idle injection duration is fixed while the running duration is
variable. That allows to have control on the device reactivity for the
user experience.

An idle state powering down the CPU or the cluster will allow to drop
the static leakage, thus restoring the heat capacity of the SoC. It
can be set with a trip point between the hot and the critical points,
giving the opportunity to prevent a hard reset of the system when the
cpufreq cooling fails to cool down the CPU.

With more sophisticated boards having a per core sensor, the idle
cooling device allows to cool down a single core without throttling
the compute capacity of several cpus belonging to the same clock line,
so it could be used in collaboration with the cpufreq cooling device.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20191219225317.17158-2-daniel.lezcano@linaro.org
This commit is contained in:
Daniel Lezcano 2019-12-19 23:53:16 +01:00
parent 0a1990a2d1
commit a4c428e523
5 changed files with 261 additions and 0 deletions

View File

@ -16342,12 +16342,15 @@ F: Documentation/devicetree/bindings/thermal/
THERMAL/CPU_COOLING
M: Amit Daniel Kachhap <amit.kachhap@gmail.com>
M: Daniel Lezcano <daniel.lezcano@linaro.org>
M: Viresh Kumar <viresh.kumar@linaro.org>
M: Javi Merino <javi.merino@kernel.org>
L: linux-pm@vger.kernel.org
S: Supported
F: Documentation/driver-api/thermal/cpu-cooling-api.rst
F: Documentation/driver-api/thermal/cpu-idle-cooling.rst
F: drivers/thermal/cpu_cooling.c
F: drivers/thermal/cpuidle_cooling.c
F: include/linux/cpu_cooling.h
THERMAL DRIVER FOR AMLOGIC SOCS

View File

@ -170,6 +170,13 @@ config CPU_FREQ_THERMAL
This will be useful for platforms using the generic thermal interface
and not the ACPI interface.
config CPU_IDLE_THERMAL
bool "CPU idle cooling device"
depends on IDLE_INJECT
help
This implements the CPU cooling mechanism through
idle injection. This will throttle the CPU by injecting
idle cycle.
endif
config CLOCK_THERMAL

View File

@ -20,6 +20,7 @@ thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR) += power_allocator.o
# cpufreq cooling
thermal_sys-$(CONFIG_CPU_FREQ_THERMAL) += cpu_cooling.o
thermal_sys-$(CONFIG_CPU_IDLE_THERMAL) += cpuidle_cooling.o
# clock cooling
thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o

View File

@ -0,0 +1,232 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2019 Linaro Limited.
*
* Author: Daniel Lezcano <daniel.lezcano@linaro.org>
*
*/
#include <linux/cpu_cooling.h>
#include <linux/cpuidle.h>
#include <linux/err.h>
#include <linux/idle_inject.h>
#include <linux/idr.h>
#include <linux/slab.h>
#include <linux/thermal.h>
/**
* struct cpuidle_cooling_device - data for the idle cooling device
* @ii_dev: an atomic to keep track of the last task exiting the idle cycle
* @state: a normalized integer giving the state of the cooling device
*/
struct cpuidle_cooling_device {
struct idle_inject_device *ii_dev;
unsigned long state;
};
static DEFINE_IDA(cpuidle_ida);
/**
* cpuidle_cooling_runtime - Running time computation
* @idle_duration_us: the idle cooling device
* @state: a percentile based number
*
* The running duration is computed from the idle injection duration
* which is fixed. If we reach 100% of idle injection ratio, that
* means the running duration is zero. If we have a 50% ratio
* injection, that means we have equal duration for idle and for
* running duration.
*
* The formula is deduced as follows:
*
* running = idle x ((100 / ratio) - 1)
*
* For precision purpose for integer math, we use the following:
*
* running = (idle x 100) / ratio - idle
*
* For example, if we have an injected duration of 50%, then we end up
* with 10ms of idle injection and 10ms of running duration.
*
* Return: An unsigned int for a usec based runtime duration.
*/
static unsigned int cpuidle_cooling_runtime(unsigned int idle_duration_us,
unsigned long state)
{
if (!state)
return 0;
return ((idle_duration_us * 100) / state) - idle_duration_us;
}
/**
* cpuidle_cooling_get_max_state - Get the maximum state
* @cdev : the thermal cooling device
* @state : a pointer to the state variable to be filled
*
* The function always returns 100 as the injection ratio. It is
* percentile based for consistency accross different platforms.
*
* Return: The function can not fail, it is always zero
*/
static int cpuidle_cooling_get_max_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
/*
* Depending on the configuration or the hardware, the running
* cycle and the idle cycle could be different. We want to
* unify that to an 0..100 interval, so the set state
* interface will be the same whatever the platform is.
*
* The state 100% will make the cluster 100% ... idle. A 0%
* injection ratio means no idle injection at all and 50%
* means for 10ms of idle injection, we have 10ms of running
* time.
*/
*state = 100;
return 0;
}
/**
* cpuidle_cooling_get_cur_state - Get the current cooling state
* @cdev: the thermal cooling device
* @state: a pointer to the state
*
* The function just copies the state value from the private thermal
* cooling device structure, the mapping is 1 <-> 1.
*
* Return: The function can not fail, it is always zero
*/
static int cpuidle_cooling_get_cur_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
struct cpuidle_cooling_device *idle_cdev = cdev->devdata;
*state = idle_cdev->state;
return 0;
}
/**
* cpuidle_cooling_set_cur_state - Set the current cooling state
* @cdev: the thermal cooling device
* @state: the target state
*
* The function checks first if we are initiating the mitigation which
* in turn wakes up all the idle injection tasks belonging to the idle
* cooling device. In any case, it updates the internal state for the
* cooling device.
*
* Return: The function can not fail, it is always zero
*/
static int cpuidle_cooling_set_cur_state(struct thermal_cooling_device *cdev,
unsigned long state)
{
struct cpuidle_cooling_device *idle_cdev = cdev->devdata;
struct idle_inject_device *ii_dev = idle_cdev->ii_dev;
unsigned long current_state = idle_cdev->state;
unsigned int runtime_us, idle_duration_us;
idle_cdev->state = state;
idle_inject_get_duration(ii_dev, &runtime_us, &idle_duration_us);
runtime_us = cpuidle_cooling_runtime(idle_duration_us, state);
idle_inject_set_duration(ii_dev, runtime_us, idle_duration_us);
if (current_state == 0 && state > 0) {
idle_inject_start(ii_dev);
} else if (current_state > 0 && !state) {
idle_inject_stop(ii_dev);
}
return 0;
}
/**
* cpuidle_cooling_ops - thermal cooling device ops
*/
static struct thermal_cooling_device_ops cpuidle_cooling_ops = {
.get_max_state = cpuidle_cooling_get_max_state,
.get_cur_state = cpuidle_cooling_get_cur_state,
.set_cur_state = cpuidle_cooling_set_cur_state,
};
/**
* cpuidle_of_cooling_register - Idle cooling device initialization function
* @drv: a cpuidle driver structure pointer
* @np: a node pointer to a device tree cooling device node
*
* This function is in charge of creating a cooling device per cpuidle
* driver and register it to thermal framework.
*
* Return: zero on success, or negative value corresponding to the
* error detected in the underlying subsystems.
*/
int cpuidle_of_cooling_register(struct device_node *np,
struct cpuidle_driver *drv)
{
struct idle_inject_device *ii_dev;
struct cpuidle_cooling_device *idle_cdev;
struct thermal_cooling_device *cdev;
char dev_name[THERMAL_NAME_LENGTH];
int id, ret;
idle_cdev = kzalloc(sizeof(*idle_cdev), GFP_KERNEL);
if (!idle_cdev) {
ret = -ENOMEM;
goto out;
}
id = ida_simple_get(&cpuidle_ida, 0, 0, GFP_KERNEL);
if (id < 0) {
ret = id;
goto out_kfree;
}
ii_dev = idle_inject_register(drv->cpumask);
if (!ii_dev) {
ret = -EINVAL;
goto out_id;
}
idle_inject_set_duration(ii_dev, TICK_USEC, TICK_USEC);
idle_cdev->ii_dev = ii_dev;
snprintf(dev_name, sizeof(dev_name), "thermal-idle-%d", id);
cdev = thermal_of_cooling_device_register(np, dev_name, idle_cdev,
&cpuidle_cooling_ops);
if (IS_ERR(cdev)) {
ret = PTR_ERR(cdev);
goto out_unregister;
}
return 0;
out_unregister:
idle_inject_unregister(ii_dev);
out_id:
ida_simple_remove(&cpuidle_ida, id);
out_kfree:
kfree(idle_cdev);
out:
return ret;
}
/**
* cpuidle_cooling_register - Idle cooling device initialization function
* @drv: a cpuidle driver structure pointer
*
* This function is in charge of creating a cooling device per cpuidle
* driver and register it to thermal framework.
*
* Return: zero on success, or negative value corresponding to the
* error detected in the underlying subsystems.
*/
int cpuidle_cooling_register(struct cpuidle_driver *drv)
{
return cpuidle_of_cooling_register(NULL, drv);
}

View File

@ -60,4 +60,22 @@ of_cpufreq_cooling_register(struct cpufreq_policy *policy)
}
#endif /* CONFIG_CPU_FREQ_THERMAL */
struct cpuidle_driver;
#ifdef CONFIG_CPU_IDLE_THERMAL
int cpuidle_cooling_register(struct cpuidle_driver *drv);
int cpuidle_of_cooling_register(struct device_node *np,
struct cpuidle_driver *drv);
#else /* CONFIG_CPU_IDLE_THERMAL */
static inline int cpuidle_cooling_register(struct cpuidle_driver *drv)
{
return 0;
}
static inline int cpuidle_of_cooling_register(struct device_node *np,
struct cpuidle_driver *drv)
{
return 0;
}
#endif /* CONFIG_CPU_IDLE_THERMAL */
#endif /* __CPU_COOLING_H__ */