mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-14 22:44:27 +08:00
net: mtk_eth_soc: correct 802.3z duplex setting
Phylink does not guarantee that state->duplex will be set correctly in the mac_config() call, so it's a bug that the driver makes use of it. Move the 802.3z PCS duplex configuration to mac_link_up(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
parent
7da3f901f8
commit
a459187390
@ -485,8 +485,18 @@ static void mtk_mac_link_up(struct phylink_config *config,
|
||||
{
|
||||
struct mtk_mac *mac = container_of(config, struct mtk_mac,
|
||||
phylink_config);
|
||||
u32 mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
|
||||
u32 mcr;
|
||||
|
||||
if (phy_interface_mode_is_8023z(interface)) {
|
||||
struct mtk_eth *eth = mac->hw;
|
||||
|
||||
/* Decide how GMAC and SGMIISYS be mapped */
|
||||
int sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ?
|
||||
0 : mac->id;
|
||||
mtk_sgmii_link_up(eth->sgmii, sid, speed, duplex);
|
||||
}
|
||||
|
||||
mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
|
||||
mcr &= ~(MAC_MCR_SPEED_100 | MAC_MCR_SPEED_1000 |
|
||||
MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_TX_FC |
|
||||
MAC_MCR_FORCE_RX_FC);
|
||||
@ -2986,9 +2996,7 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
|
||||
|
||||
mac->phylink_config.dev = ð->netdev[id]->dev;
|
||||
mac->phylink_config.type = PHYLINK_NETDEV;
|
||||
/* This driver makes use of state->speed/state->duplex in
|
||||
* mac_config
|
||||
*/
|
||||
/* This driver makes use of state->speed in mac_config */
|
||||
mac->phylink_config.legacy_pre_march2020 = true;
|
||||
mac->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
|
||||
MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD;
|
||||
|
@ -1017,6 +1017,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *np,
|
||||
int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id);
|
||||
int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
|
||||
const struct phylink_link_state *state);
|
||||
void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex);
|
||||
void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id);
|
||||
|
||||
int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id);
|
||||
|
@ -83,14 +83,10 @@ int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
|
||||
val &= ~SGMII_AN_ENABLE;
|
||||
regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val);
|
||||
|
||||
/* SGMII force mode setting */
|
||||
/* Set the speed etc but leave the duplex unchanged */
|
||||
regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
|
||||
val &= ~SGMII_IF_MODE_MASK;
|
||||
val &= SGMII_DUPLEX_FULL | ~SGMII_IF_MODE_MASK;
|
||||
val |= SGMII_SPEED_1000;
|
||||
|
||||
if (state->duplex == DUPLEX_FULL)
|
||||
val |= SGMII_DUPLEX_FULL;
|
||||
|
||||
regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
|
||||
|
||||
/* Release PHYA power down state */
|
||||
@ -101,6 +97,20 @@ int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* For 1000BASE-X and 2500BASE-X interface modes */
|
||||
void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex)
|
||||
{
|
||||
unsigned int val;
|
||||
|
||||
/* SGMII force duplex setting */
|
||||
regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
|
||||
val &= ~SGMII_DUPLEX_FULL;
|
||||
if (duplex == DUPLEX_FULL)
|
||||
val |= SGMII_DUPLEX_FULL;
|
||||
|
||||
regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
|
||||
}
|
||||
|
||||
void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id)
|
||||
{
|
||||
struct mtk_sgmii *ss = eth->sgmii;
|
||||
|
Loading…
Reference in New Issue
Block a user