arm64: dts: colibri-imx8x: fix eval board pin configuration

Fix pinctrl groups to have SODIMM 75 only in one group.
Remove configuration of the pin at SoM level because it is normally
used as CSI_MCLK at camera interface connector.
Without this fix it is not possible, without redefining iomuxc pinctrl,
to use CSI_MCLK signal and leads to the following error messages:

imx8qxp-pinctrl scu:pinctrl: pin IMX8QXP_CSI_MCLK already requested
imx8qxp-pinctrl scu:pinctrl: pin-147 (16-003c) status -22

Fixes: 4d2adf7381 ("arm64: dts: colibri-imx8x: Split pinctrl_hog1")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Emanuele Ghidoli 2023-05-14 11:22:43 +02:00 committed by Shawn Guo
parent 07bb2e3688
commit a346d4dc74

View File

@ -365,7 +365,7 @@
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
<&pinctrl_hog2>, <&pinctrl_lpspi2_cs2>;
<&pinctrl_lpspi2_cs2>;
/* On-module touch pen-down interrupt */
pinctrl_ad7879_int: ad7879intgrp {
@ -499,8 +499,7 @@
};
pinctrl_hog1: hog1grp {
fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20>, /* SODIMM 75 */
<IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20>; /* SODIMM 93 */
fsl,pins = <IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20>; /* SODIMM 93 */
};
pinctrl_hog2: hog2grp {