From a2388a498ad2f85be01aca29e364abf427d9b53c Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Wed, 21 Aug 2013 11:13:16 +0800 Subject: [PATCH] ASoC: fsl: Add S/PDIF CPU DAI driver This patch implements a device-tree-only CPU DAI driver for Freescale S/PDIF controller that supports stereo playback and record feature. Signed-off-by: Nicolin Chen Acked-by: Stephen Warren Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/fsl,spdif.txt | 54 + sound/soc/fsl/Kconfig | 3 + sound/soc/fsl/Makefile | 2 + sound/soc/fsl/fsl_spdif.c | 1236 +++++++++++++++++ sound/soc/fsl/fsl_spdif.h | 191 +++ 5 files changed, 1486 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.txt create mode 100644 sound/soc/fsl/fsl_spdif.c create mode 100644 sound/soc/fsl/fsl_spdif.h diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt new file mode 100644 index 000000000000..f2ae335670f5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -0,0 +1,54 @@ +Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller + +The Freescale S/PDIF audio block is a stereo transceiver that allows the +processor to receive and transmit digital audio via an coaxial cable or +a fibre cable. + +Required properties: + + - compatible : Compatible list, must contain "fsl,imx35-spdif". + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains the spdif interrupt. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + + - dma-names : Two dmas have to be defined, "tx" and "rx". + + - clocks : Contains an entry for each entry in clock-names. + + - clock-names : Includes the following entries: + "core" The core clock of spdif controller + "rxtx<0-7>" Clock source list for tx and rx clock. + This clock list should be identical to + the source list connecting to the spdif + clock mux in "SPDIF Transceiver Clock + Diagram" of SoC reference manual. It + can also be referred to TxClk_Source + bit of register SPDIF_STC. + +Example: + +spdif: spdif@02004000 { + compatible = "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + + clocks = <&clks 197>, <&clks 3>, + <&clks 197>, <&clks 107>, + <&clks 0>, <&clks 118>, + <&clks 62>, <&clks 139>, + <&clks 0>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7"; + + status = "okay"; +}; diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 3a4808d376d0..cd088cc8c866 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -1,6 +1,9 @@ config SND_SOC_FSL_SSI tristate +config SND_SOC_FSL_SPDIF + tristate + config SND_SOC_FSL_UTILS tristate diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index d4b4aa8b5649..4b5970e014dd 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -12,9 +12,11 @@ obj-$(CONFIG_SND_SOC_P1022_RDK) += snd-soc-p1022-rdk.o # Freescale PowerPC SSI/DMA Platform Support snd-soc-fsl-ssi-objs := fsl_ssi.o +snd-soc-fsl-spdif-objs := fsl_spdif.o snd-soc-fsl-utils-objs := fsl_utils.o snd-soc-fsl-dma-objs := fsl_dma.o obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o +obj-$(CONFIG_SND_SOC_FSL_SPDIF) += snd-soc-fsl-spdif.o obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c new file mode 100644 index 000000000000..42a43820d993 --- /dev/null +++ b/sound/soc/fsl/fsl_spdif.c @@ -0,0 +1,1236 @@ +/* + * Freescale S/PDIF ALSA SoC Digital Audio Interface (DAI) driver + * + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * Based on stmp3xxx_spdif_dai.c + * Vladimir Barinov + * Copyright 2008 SigmaTel, Inc + * Copyright 2008 Embedded Alley Solutions, Inc + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "fsl_spdif.h" +#include "imx-pcm.h" + +#define FSL_SPDIF_TXFIFO_WML 0x8 +#define FSL_SPDIF_RXFIFO_WML 0x8 + +#define INTR_FOR_PLAYBACK (INT_TXFIFO_RESYNC) +#define INTR_FOR_CAPTURE (INT_SYM_ERR | INT_BIT_ERR | INT_URX_FUL | INT_URX_OV|\ + INT_QRX_FUL | INT_QRX_OV | INT_UQ_SYNC | INT_UQ_ERR |\ + INT_RXFIFO_RESYNC | INT_LOSS_LOCK | INT_DPLL_LOCKED) + +/* Index list for the values that has if (DPLL Locked) condition */ +static u8 srpc_dpll_locked[] = { 0x0, 0x1, 0x2, 0x3, 0x4, 0xa, 0xb }; +#define SRPC_NODPLL_START1 0x5 +#define SRPC_NODPLL_START2 0xc + +#define DEFAULT_RXCLK_SRC 1 + +/* + * SPDIF control structure + * Defines channel status, subcode and Q sub + */ +struct spdif_mixer_control { + /* spinlock to access control data */ + spinlock_t ctl_lock; + + /* IEC958 channel tx status bit */ + unsigned char ch_status[4]; + + /* User bits */ + unsigned char subcode[2 * SPDIF_UBITS_SIZE]; + + /* Q subcode part of user bits */ + unsigned char qsub[2 * SPDIF_QSUB_SIZE]; + + /* Buffer offset for U/Q */ + u32 upos; + u32 qpos; + + /* Ready buffer index of the two buffers */ + u32 ready_buf; +}; + +struct fsl_spdif_priv { + struct spdif_mixer_control fsl_spdif_control; + struct snd_soc_dai_driver cpu_dai_drv; + struct platform_device *pdev; + struct regmap *regmap; + bool dpll_locked; + u8 txclk_div[SPDIF_TXRATE_MAX]; + u8 txclk_src[SPDIF_TXRATE_MAX]; + u8 rxclk_src; + struct clk *txclk[SPDIF_TXRATE_MAX]; + struct clk *rxclk; + struct snd_dmaengine_dai_dma_data dma_params_tx; + struct snd_dmaengine_dai_dma_data dma_params_rx; + + /* The name space will be allocated dynamically */ + char name[0]; +}; + + +/* DPLL locked and lock loss interrupt handler */ +static void spdif_irq_dpll_lock(struct fsl_spdif_priv *spdif_priv) +{ + struct regmap *regmap = spdif_priv->regmap; + struct platform_device *pdev = spdif_priv->pdev; + u32 locked; + + regmap_read(regmap, REG_SPDIF_SRPC, &locked); + locked &= SRPC_DPLL_LOCKED; + + dev_dbg(&pdev->dev, "isr: Rx dpll %s \n", + locked ? "locked" : "loss lock"); + + spdif_priv->dpll_locked = locked ? true : false; +} + +/* Receiver found illegal symbol interrupt handler */ +static void spdif_irq_sym_error(struct fsl_spdif_priv *spdif_priv) +{ + struct regmap *regmap = spdif_priv->regmap; + struct platform_device *pdev = spdif_priv->pdev; + + dev_dbg(&pdev->dev, "isr: receiver found illegal symbol\n"); + + if (!spdif_priv->dpll_locked) { + /* DPLL unlocked seems no audio stream */ + regmap_update_bits(regmap, REG_SPDIF_SIE, INT_SYM_ERR, 0); + } +} + +/* U/Q Channel receive register full */ +static void spdif_irq_uqrx_full(struct fsl_spdif_priv *spdif_priv, char name) +{ + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; + struct regmap *regmap = spdif_priv->regmap; + struct platform_device *pdev = spdif_priv->pdev; + u32 *pos, size, val, reg; + + switch (name) { + case 'U': + pos = &ctrl->upos; + size = SPDIF_UBITS_SIZE; + reg = REG_SPDIF_SRU; + break; + case 'Q': + pos = &ctrl->qpos; + size = SPDIF_QSUB_SIZE; + reg = REG_SPDIF_SRQ; + break; + default: + dev_err(&pdev->dev, "unsupported channel name\n"); + return; + } + + dev_dbg(&pdev->dev, "isr: %c Channel receive register full\n", name); + + if (*pos >= size * 2) { + *pos = 0; + } else if (unlikely((*pos % size) + 3 > size)) { + dev_err(&pdev->dev, "User bit receivce buffer overflow\n"); + return; + } + + regmap_read(regmap, reg, &val); + ctrl->subcode[*pos++] = val >> 16; + ctrl->subcode[*pos++] = val >> 8; + ctrl->subcode[*pos++] = val; +} + +/* U/Q Channel sync found */ +static void spdif_irq_uq_sync(struct fsl_spdif_priv *spdif_priv) +{ + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; + struct platform_device *pdev = spdif_priv->pdev; + + dev_dbg(&pdev->dev, "isr: U/Q Channel sync found\n"); + + /* U/Q buffer reset */ + if (ctrl->qpos == 0) + return; + + /* Set ready to this buffer */ + ctrl->ready_buf = (ctrl->qpos - 1) / SPDIF_QSUB_SIZE + 1; +} + +/* U/Q Channel framing error */ +static void spdif_irq_uq_err(struct fsl_spdif_priv *spdif_priv) +{ + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; + struct regmap *regmap = spdif_priv->regmap; + struct platform_device *pdev = spdif_priv->pdev; + u32 val; + + dev_dbg(&pdev->dev, "isr: U/Q Channel framing error\n"); + + /* Read U/Q data to clear the irq and do buffer reset */ + regmap_read(regmap, REG_SPDIF_SRU, &val); + regmap_read(regmap, REG_SPDIF_SRQ, &val); + + /* Drop this U/Q buffer */ + ctrl->ready_buf = 0; + ctrl->upos = 0; + ctrl->qpos = 0; +} + +/* Get spdif interrupt status and clear the interrupt */ +static u32 spdif_intr_status_clear(struct fsl_spdif_priv *spdif_priv) +{ + struct regmap *regmap = spdif_priv->regmap; + u32 val, val2; + + regmap_read(regmap, REG_SPDIF_SIS, &val); + regmap_read(regmap, REG_SPDIF_SIE, &val2); + + regmap_write(regmap, REG_SPDIF_SIC, val & val2); + + return val; +} + +static irqreturn_t spdif_isr(int irq, void *devid) +{ + struct fsl_spdif_priv *spdif_priv = (struct fsl_spdif_priv *)devid; + struct platform_device *pdev = spdif_priv->pdev; + u32 sis; + + sis = spdif_intr_status_clear(spdif_priv); + + if (sis & INT_DPLL_LOCKED) + spdif_irq_dpll_lock(spdif_priv); + + if (sis & INT_TXFIFO_UNOV) + dev_dbg(&pdev->dev, "isr: Tx FIFO under/overrun\n"); + + if (sis & INT_TXFIFO_RESYNC) + dev_dbg(&pdev->dev, "isr: Tx FIFO resync\n"); + + if (sis & INT_CNEW) + dev_dbg(&pdev->dev, "isr: cstatus new\n"); + + if (sis & INT_VAL_NOGOOD) + dev_dbg(&pdev->dev, "isr: validity flag no good\n"); + + if (sis & INT_SYM_ERR) + spdif_irq_sym_error(spdif_priv); + + if (sis & INT_BIT_ERR) + dev_dbg(&pdev->dev, "isr: receiver found parity bit error\n"); + + if (sis & INT_URX_FUL) + spdif_irq_uqrx_full(spdif_priv, 'U'); + + if (sis & INT_URX_OV) + dev_dbg(&pdev->dev, "isr: U Channel receive register overrun\n"); + + if (sis & INT_QRX_FUL) + spdif_irq_uqrx_full(spdif_priv, 'Q'); + + if (sis & INT_QRX_OV) + dev_dbg(&pdev->dev, "isr: Q Channel receive register overrun\n"); + + if (sis & INT_UQ_SYNC) + spdif_irq_uq_sync(spdif_priv); + + if (sis & INT_UQ_ERR) + spdif_irq_uq_err(spdif_priv); + + if (sis & INT_RXFIFO_UNOV) + dev_dbg(&pdev->dev, "isr: Rx FIFO under/overrun\n"); + + if (sis & INT_RXFIFO_RESYNC) + dev_dbg(&pdev->dev, "isr: Rx FIFO resync\n"); + + if (sis & INT_LOSS_LOCK) + spdif_irq_dpll_lock(spdif_priv); + + /* FIXME: Write Tx FIFO to clear TxEm */ + if (sis & INT_TX_EM) + dev_dbg(&pdev->dev, "isr: Tx FIFO empty\n"); + + /* FIXME: Read Rx FIFO to clear RxFIFOFul */ + if (sis & INT_RXFIFO_FUL) + dev_dbg(&pdev->dev, "isr: Rx FIFO full\n"); + + return IRQ_HANDLED; +} + +static int spdif_softreset(struct fsl_spdif_priv *spdif_priv) +{ + struct regmap *regmap = spdif_priv->regmap; + u32 val, cycle = 1000; + + regmap_write(regmap, REG_SPDIF_SCR, SCR_SOFT_RESET); + + /* + * RESET bit would be cleared after finishing its reset procedure, + * which typically lasts 8 cycles. 1000 cycles will keep it safe. + */ + do { + regmap_read(regmap, REG_SPDIF_SCR, &val); + } while ((val & SCR_SOFT_RESET) && cycle--); + + if (cycle) + return 0; + else + return -EBUSY; +} + +static void spdif_set_cstatus(struct spdif_mixer_control *ctrl, + u8 mask, u8 cstatus) +{ + ctrl->ch_status[3] &= ~mask; + ctrl->ch_status[3] |= cstatus & mask; +} + +static void spdif_write_channel_status(struct fsl_spdif_priv *spdif_priv) +{ + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; + struct regmap *regmap = spdif_priv->regmap; + struct platform_device *pdev = spdif_priv->pdev; + u32 ch_status; + + ch_status = (bitrev8(ctrl->ch_status[0]) << 16) | + (bitrev8(ctrl->ch_status[1]) << 8) | + bitrev8(ctrl->ch_status[2]); + regmap_write(regmap, REG_SPDIF_STCSCH, ch_status); + + dev_dbg(&pdev->dev, "STCSCH: 0x%06x\n", ch_status); + + ch_status = bitrev8(ctrl->ch_status[3]) << 16; + regmap_write(regmap, REG_SPDIF_STCSCL, ch_status); + + dev_dbg(&pdev->dev, "STCSCL: 0x%06x\n", ch_status); +} + +/* Set SPDIF PhaseConfig register for rx clock */ +static int spdif_set_rx_clksrc(struct fsl_spdif_priv *spdif_priv, + enum spdif_gainsel gainsel, int dpll_locked) +{ + struct regmap *regmap = spdif_priv->regmap; + u8 clksrc = spdif_priv->rxclk_src; + + if (clksrc >= SRPC_CLKSRC_MAX || gainsel >= GAINSEL_MULTI_MAX) + return -EINVAL; + + regmap_update_bits(regmap, REG_SPDIF_SRPC, + SRPC_CLKSRC_SEL_MASK | SRPC_GAINSEL_MASK, + SRPC_CLKSRC_SEL_SET(clksrc) | SRPC_GAINSEL_SET(gainsel)); + + return 0; +} + +static int spdif_set_sample_rate(struct snd_pcm_substream *substream, + int sample_rate) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; + struct regmap *regmap = spdif_priv->regmap; + struct platform_device *pdev = spdif_priv->pdev; + unsigned long csfs = 0; + u32 stc, mask, rate; + u8 clk, div; + int ret; + + switch (sample_rate) { + case 32000: + rate = SPDIF_TXRATE_32000; + csfs = IEC958_AES3_CON_FS_32000; + break; + case 44100: + rate = SPDIF_TXRATE_44100; + csfs = IEC958_AES3_CON_FS_44100; + break; + case 48000: + rate = SPDIF_TXRATE_48000; + csfs = IEC958_AES3_CON_FS_48000; + break; + default: + dev_err(&pdev->dev, "unsupported sample rate %d\n", sample_rate); + return -EINVAL; + } + + clk = spdif_priv->txclk_src[rate]; + if (clk >= STC_TXCLK_SRC_MAX) { + dev_err(&pdev->dev, "tx clock source is out of range\n"); + return -EINVAL; + } + + div = spdif_priv->txclk_div[rate]; + if (div == 0) { + dev_err(&pdev->dev, "the divisor can't be zero\n"); + return -EINVAL; + } + + /* + * The S/PDIF block needs a clock of 64 * fs * div. The S/PDIF block + * will divide by (div). So request 64 * fs * (div+1) which will + * get rounded. + */ + ret = clk_set_rate(spdif_priv->txclk[rate], 64 * sample_rate * (div + 1)); + if (ret) { + dev_err(&pdev->dev, "failed to set tx clock rate\n"); + return ret; + } + + dev_dbg(&pdev->dev, "expected clock rate = %d\n", + (64 * sample_rate * div)); + dev_dbg(&pdev->dev, "actual clock rate = %ld\n", + clk_get_rate(spdif_priv->txclk[rate])); + + /* set fs field in consumer channel status */ + spdif_set_cstatus(ctrl, IEC958_AES3_CON_FS, csfs); + + /* select clock source and divisor */ + stc = STC_TXCLK_ALL_EN | STC_TXCLK_SRC_SET(clk) | STC_TXCLK_DIV(div); + mask = STC_TXCLK_ALL_EN_MASK | STC_TXCLK_SRC_MASK | STC_TXCLK_DIV_MASK; + regmap_update_bits(regmap, REG_SPDIF_STC, mask, stc); + + dev_dbg(&pdev->dev, "set sample rate to %d\n", sample_rate); + + return 0; +} + +int fsl_spdif_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct platform_device *pdev = spdif_priv->pdev; + struct regmap *regmap = spdif_priv->regmap; + u32 scr, mask, i; + int ret; + + /* Reset module and interrupts only for first initialization */ + if (!cpu_dai->active) { + ret = spdif_softreset(spdif_priv); + if (ret) { + dev_err(&pdev->dev, "failed to soft reset\n"); + return ret; + } + + /* Disable all the interrupts */ + regmap_update_bits(regmap, REG_SPDIF_SIE, 0xffffff, 0); + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + scr = SCR_TXFIFO_AUTOSYNC | SCR_TXFIFO_CTRL_NORMAL | + SCR_TXSEL_NORMAL | SCR_USRC_SEL_CHIP | + SCR_TXFIFO_FSEL_IF8; + mask = SCR_TXFIFO_AUTOSYNC_MASK | SCR_TXFIFO_CTRL_MASK | + SCR_TXSEL_MASK | SCR_USRC_SEL_MASK | + SCR_TXFIFO_FSEL_MASK; + for (i = 0; i < SPDIF_TXRATE_MAX; i++) + clk_prepare_enable(spdif_priv->txclk[i]); + } else { + scr = SCR_RXFIFO_FSEL_IF8 | SCR_RXFIFO_AUTOSYNC; + mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK| + SCR_RXFIFO_CTL_MASK | SCR_RXFIFO_OFF_MASK; + clk_prepare_enable(spdif_priv->rxclk); + } + regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr); + + /* Power up SPDIF module */ + regmap_update_bits(regmap, REG_SPDIF_SCR, SCR_LOW_POWER, 0); + + return 0; +} + +static void fsl_spdif_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct regmap *regmap = spdif_priv->regmap; + u32 scr, mask, i; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + scr = 0; + mask = SCR_TXFIFO_AUTOSYNC_MASK | SCR_TXFIFO_CTRL_MASK | + SCR_TXSEL_MASK | SCR_USRC_SEL_MASK | + SCR_TXFIFO_FSEL_MASK; + for (i = 0; i < SPDIF_TXRATE_MAX; i++) + clk_disable_unprepare(spdif_priv->txclk[i]); + } else { + scr = SCR_RXFIFO_OFF | SCR_RXFIFO_CTL_ZERO; + mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK| + SCR_RXFIFO_CTL_MASK | SCR_RXFIFO_OFF_MASK; + clk_disable_unprepare(spdif_priv->rxclk); + } + regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr); + + /* Power down SPDIF module only if tx&rx are both inactive */ + if (!cpu_dai->active) { + spdif_intr_status_clear(spdif_priv); + regmap_update_bits(regmap, REG_SPDIF_SCR, + SCR_LOW_POWER, SCR_LOW_POWER); + } +} + +static int fsl_spdif_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; + struct platform_device *pdev = spdif_priv->pdev; + u32 sample_rate = params_rate(params); + int ret = 0; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + ret = spdif_set_sample_rate(substream, sample_rate); + if (ret) { + dev_err(&pdev->dev, "%s: set sample rate failed: %d\n", + __func__, sample_rate); + return ret; + } + spdif_set_cstatus(ctrl, IEC958_AES3_CON_CLOCK, + IEC958_AES3_CON_CLOCK_1000PPM); + spdif_write_channel_status(spdif_priv); + } else { + /* Setup rx clock source */ + ret = spdif_set_rx_clksrc(spdif_priv, SPDIF_DEFAULT_GAINSEL, 1); + } + + return ret; +} + +static int fsl_spdif_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct regmap *regmap = spdif_priv->regmap; + int is_playack = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK); + u32 intr = is_playack ? INTR_FOR_PLAYBACK : INTR_FOR_CAPTURE; + u32 dmaen = is_playack ? SCR_DMA_TX_EN : SCR_DMA_RX_EN;; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + regmap_update_bits(regmap, REG_SPDIF_SIE, intr, intr); + regmap_update_bits(regmap, REG_SPDIF_SCR, dmaen, dmaen); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + regmap_update_bits(regmap, REG_SPDIF_SCR, dmaen, 0); + regmap_update_bits(regmap, REG_SPDIF_SIE, intr, 0); + break; + default: + return -EINVAL; + } + + return 0; +} + +struct snd_soc_dai_ops fsl_spdif_dai_ops = { + .startup = fsl_spdif_startup, + .hw_params = fsl_spdif_hw_params, + .trigger = fsl_spdif_trigger, + .shutdown = fsl_spdif_shutdown, +}; + + +/* + * ============================================ + * FSL SPDIF IEC958 controller(mixer) functions + * + * Channel status get/put control + * User bit value get/put control + * Valid bit value get control + * DPLL lock status get control + * User bit sync mode selection control + * ============================================ + */ + +static int fsl_spdif_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; + uinfo->count = 1; + + return 0; +} + +static int fsl_spdif_pb_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *uvalue) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; + + uvalue->value.iec958.status[0] = ctrl->ch_status[0]; + uvalue->value.iec958.status[1] = ctrl->ch_status[1]; + uvalue->value.iec958.status[2] = ctrl->ch_status[2]; + uvalue->value.iec958.status[3] = ctrl->ch_status[3]; + + return 0; +} + +static int fsl_spdif_pb_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *uvalue) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; + + ctrl->ch_status[0] = uvalue->value.iec958.status[0]; + ctrl->ch_status[1] = uvalue->value.iec958.status[1]; + ctrl->ch_status[2] = uvalue->value.iec958.status[2]; + ctrl->ch_status[3] = uvalue->value.iec958.status[3]; + + spdif_write_channel_status(spdif_priv); + + return 0; +} + +/* Get channel status from SPDIF_RX_CCHAN register */ +static int fsl_spdif_capture_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); + struct regmap *regmap = spdif_priv->regmap; + u32 cstatus, val; + + regmap_read(regmap, REG_SPDIF_SIS, &val); + if (!(val & INT_CNEW)) { + return -EAGAIN; + } + + regmap_read(regmap, REG_SPDIF_SRCSH, &cstatus); + ucontrol->value.iec958.status[0] = (cstatus >> 16) & 0xFF; + ucontrol->value.iec958.status[1] = (cstatus >> 8) & 0xFF; + ucontrol->value.iec958.status[2] = cstatus & 0xFF; + + regmap_read(regmap, REG_SPDIF_SRCSL, &cstatus); + ucontrol->value.iec958.status[3] = (cstatus >> 16) & 0xFF; + ucontrol->value.iec958.status[4] = (cstatus >> 8) & 0xFF; + ucontrol->value.iec958.status[5] = cstatus & 0xFF; + + /* Clear intr */ + regmap_write(regmap, REG_SPDIF_SIC, INT_CNEW); + + return 0; +} + +/* + * Get User bits (subcode) from chip value which readed out + * in UChannel register. + */ +static int fsl_spdif_subcode_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&ctrl->ctl_lock, flags); + if (ctrl->ready_buf) { + int idx = (ctrl->ready_buf - 1) * SPDIF_UBITS_SIZE; + memcpy(&ucontrol->value.iec958.subcode[0], + &ctrl->subcode[idx], SPDIF_UBITS_SIZE); + } else { + ret = -EAGAIN; + } + spin_unlock_irqrestore(&ctrl->ctl_lock, flags); + + return ret; +} + +/* Q-subcode infomation. The byte size is SPDIF_UBITS_SIZE/8 */ +static int fsl_spdif_qinfo(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES; + uinfo->count = SPDIF_QSUB_SIZE; + + return 0; +} + +/* Get Q subcode from chip value which readed out in QChannel register */ +static int fsl_spdif_qget(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&ctrl->ctl_lock, flags); + if (ctrl->ready_buf) { + int idx = (ctrl->ready_buf - 1) * SPDIF_QSUB_SIZE; + memcpy(&ucontrol->value.bytes.data[0], + &ctrl->qsub[idx], SPDIF_QSUB_SIZE); + } else { + ret = -EAGAIN; + } + spin_unlock_irqrestore(&ctrl->ctl_lock, flags); + + return ret; +} + +/* Valid bit infomation */ +static int fsl_spdif_vbit_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + + return 0; +} + +/* Get valid good bit from interrupt status register */ +static int fsl_spdif_vbit_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); + struct regmap *regmap = spdif_priv->regmap; + u32 val; + + val = regmap_read(regmap, REG_SPDIF_SIS, &val); + ucontrol->value.integer.value[0] = (val & INT_VAL_NOGOOD) != 0; + regmap_write(regmap, REG_SPDIF_SIC, INT_VAL_NOGOOD); + + return 0; +} + +/* DPLL lock infomation */ +static int fsl_spdif_rxrate_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 16000; + uinfo->value.integer.max = 96000; + + return 0; +} + +static u32 gainsel_multi[GAINSEL_MULTI_MAX] = { + 24, 16, 12, 8, 6, 4, 3, +}; + +/* Get RX data clock rate given the SPDIF bus_clk */ +static int spdif_get_rxclk_rate(struct fsl_spdif_priv *spdif_priv, + enum spdif_gainsel gainsel) +{ + struct regmap *regmap = spdif_priv->regmap; + struct platform_device *pdev = spdif_priv->pdev; + u64 tmpval64, busclk_freq = 0; + u32 freqmeas, phaseconf; + u8 clksrc; + + regmap_read(regmap, REG_SPDIF_SRFM, &freqmeas); + regmap_read(regmap, REG_SPDIF_SRPC, &phaseconf); + + clksrc = (phaseconf >> SRPC_CLKSRC_SEL_OFFSET) & 0xf; + if (srpc_dpll_locked[clksrc] && (phaseconf & SRPC_DPLL_LOCKED)) { + /* Get bus clock from system */ + busclk_freq = clk_get_rate(spdif_priv->rxclk); + } + + /* FreqMeas_CLK = (BUS_CLK * FreqMeas) / 2 ^ 10 / GAINSEL / 128 */ + tmpval64 = (u64) busclk_freq * freqmeas; + do_div(tmpval64, gainsel_multi[gainsel] * 1024); + do_div(tmpval64, 128 * 1024); + + dev_dbg(&pdev->dev, "FreqMeas: %d\n", freqmeas); + dev_dbg(&pdev->dev, "BusclkFreq: %lld\n", busclk_freq); + dev_dbg(&pdev->dev, "RxRate: %lld\n", tmpval64); + + return (int)tmpval64; +} + +/* + * Get DPLL lock or not info from stable interrupt status register. + * User application must use this control to get locked, + * then can do next PCM operation + */ +static int fsl_spdif_rxrate_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); + int rate = spdif_get_rxclk_rate(spdif_priv, SPDIF_DEFAULT_GAINSEL); + + if (spdif_priv->dpll_locked) + ucontrol->value.integer.value[0] = rate; + else + ucontrol->value.integer.value[0] = 0; + + return 0; +} + +/* User bit sync mode info */ +static int fsl_spdif_usync_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + + return 0; +} + +/* + * User bit sync mode: + * 1 CD User channel subcode + * 0 Non-CD data + */ +static int fsl_spdif_usync_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); + struct regmap *regmap = spdif_priv->regmap; + u32 val; + + regmap_read(regmap, REG_SPDIF_SRCD, &val); + ucontrol->value.integer.value[0] = (val & SRCD_CD_USER) != 0; + + return 0; +} + +/* + * User bit sync mode: + * 1 CD User channel subcode + * 0 Non-CD data + */ +static int fsl_spdif_usync_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); + struct regmap *regmap = spdif_priv->regmap; + u32 val = ucontrol->value.integer.value[0] << SRCD_CD_USER_OFFSET; + + regmap_update_bits(regmap, REG_SPDIF_SRCD, SRCD_CD_USER, val); + + return 0; +} + +/* FSL SPDIF IEC958 controller defines */ +static struct snd_kcontrol_new fsl_spdif_ctrls[] = { + /* Status cchanel controller */ + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), + .access = SNDRV_CTL_ELEM_ACCESS_READ | + SNDRV_CTL_ELEM_ACCESS_WRITE | + SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = fsl_spdif_info, + .get = fsl_spdif_pb_get, + .put = fsl_spdif_pb_put, + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT), + .access = SNDRV_CTL_ELEM_ACCESS_READ | + SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = fsl_spdif_info, + .get = fsl_spdif_capture_get, + }, + /* User bits controller */ + { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = "IEC958 Subcode Capture Default", + .access = SNDRV_CTL_ELEM_ACCESS_READ | + SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = fsl_spdif_info, + .get = fsl_spdif_subcode_get, + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = "IEC958 Q-subcode Capture Default", + .access = SNDRV_CTL_ELEM_ACCESS_READ | + SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = fsl_spdif_qinfo, + .get = fsl_spdif_qget, + }, + /* Valid bit error controller */ + { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = "IEC958 V-Bit Errors", + .access = SNDRV_CTL_ELEM_ACCESS_READ | + SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = fsl_spdif_vbit_info, + .get = fsl_spdif_vbit_get, + }, + /* DPLL lock info get controller */ + { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = "RX Sample Rate", + .access = SNDRV_CTL_ELEM_ACCESS_READ | + SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = fsl_spdif_rxrate_info, + .get = fsl_spdif_rxrate_get, + }, + /* User bit sync mode set/get controller */ + { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = "IEC958 USyncMode CDText", + .access = SNDRV_CTL_ELEM_ACCESS_READ | + SNDRV_CTL_ELEM_ACCESS_WRITE | + SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = fsl_spdif_usync_info, + .get = fsl_spdif_usync_get, + .put = fsl_spdif_usync_put, + }, +}; + +static int fsl_spdif_dai_probe(struct snd_soc_dai *dai) +{ + struct fsl_spdif_priv *spdif_private = snd_soc_dai_get_drvdata(dai); + + dai->playback_dma_data = &spdif_private->dma_params_tx; + dai->capture_dma_data = &spdif_private->dma_params_rx; + + snd_soc_add_dai_controls(dai, fsl_spdif_ctrls, ARRAY_SIZE(fsl_spdif_ctrls)); + + return 0; +} + +struct snd_soc_dai_driver fsl_spdif_dai = { + .probe = &fsl_spdif_dai_probe, + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = FSL_SPDIF_RATES_PLAYBACK, + .formats = FSL_SPDIF_FORMATS_PLAYBACK, + }, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = FSL_SPDIF_RATES_CAPTURE, + .formats = FSL_SPDIF_FORMATS_CAPTURE, + }, + .ops = &fsl_spdif_dai_ops, +}; + +static const struct snd_soc_component_driver fsl_spdif_component = { + .name = "fsl-spdif", +}; + +/* + * ================ + * FSL SPDIF REGMAP + * ================ + */ + +static bool fsl_spdif_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case REG_SPDIF_SCR: + case REG_SPDIF_SRCD: + case REG_SPDIF_SRPC: + case REG_SPDIF_SIE: + case REG_SPDIF_SIS: + case REG_SPDIF_SRL: + case REG_SPDIF_SRR: + case REG_SPDIF_SRCSH: + case REG_SPDIF_SRCSL: + case REG_SPDIF_SRU: + case REG_SPDIF_SRQ: + case REG_SPDIF_STCSCH: + case REG_SPDIF_STCSCL: + case REG_SPDIF_SRFM: + case REG_SPDIF_STC: + return true; + default: + return false; + }; +} + +static bool fsl_spdif_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case REG_SPDIF_SCR: + case REG_SPDIF_SRCD: + case REG_SPDIF_SRPC: + case REG_SPDIF_SIE: + case REG_SPDIF_SIC: + case REG_SPDIF_STL: + case REG_SPDIF_STR: + case REG_SPDIF_STCSCH: + case REG_SPDIF_STCSCL: + case REG_SPDIF_STC: + return true; + default: + return false; + }; +} + +static const struct regmap_config fsl_spdif_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + + .max_register = REG_SPDIF_STC, + .readable_reg = fsl_spdif_readable_reg, + .writeable_reg = fsl_spdif_writeable_reg, +}; + +static u32 fsl_spdif_txclk_caldiv(struct fsl_spdif_priv *spdif_priv, + struct clk *clk, u64 savesub, + enum spdif_txrate index) +{ + const u32 rate[] = { 32000, 44100, 48000 }; + u64 rate_ideal, rate_actual, sub; + u32 div, arate; + + for (div = 1; div <= 128; div++) { + rate_ideal = rate[index] * (div + 1) * 64; + rate_actual = clk_round_rate(clk, rate_ideal); + + arate = rate_actual / 64; + arate /= div; + + if (arate == rate[index]) { + /* We are lucky */ + savesub = 0; + spdif_priv->txclk_div[index] = div; + break; + } else if (arate / rate[index] == 1) { + /* A little bigger than expect */ + sub = (arate - rate[index]) * 100000; + do_div(sub, rate[index]); + if (sub < savesub) { + savesub = sub; + spdif_priv->txclk_div[index] = div; + } + } else if (rate[index] / arate == 1) { + /* A little smaller than expect */ + sub = (rate[index] - arate) * 100000; + do_div(sub, rate[index]); + if (sub < savesub) { + savesub = sub; + spdif_priv->txclk_div[index] = div; + } + } + } + + return savesub; +} + +static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv, + enum spdif_txrate index) +{ + const u32 rate[] = { 32000, 44100, 48000 }; + struct platform_device *pdev = spdif_priv->pdev; + struct device *dev = &pdev->dev; + u64 savesub = 100000, ret; + struct clk *clk; + char tmp[16]; + int i; + + for (i = 0; i < STC_TXCLK_SRC_MAX; i++) { + sprintf(tmp, "rxtx%d", i); + clk = devm_clk_get(&pdev->dev, tmp); + if (IS_ERR(clk)) { + dev_err(dev, "no rxtx%d clock in devicetree\n", i); + return PTR_ERR(clk); + } + if (!clk_get_rate(clk)) + continue; + + ret = fsl_spdif_txclk_caldiv(spdif_priv, clk, savesub, index); + if (savesub == ret) + continue; + + savesub = ret; + spdif_priv->txclk[index] = clk; + spdif_priv->txclk_src[index] = i; + + /* To quick catch a divisor, we allow a 0.1% deviation */ + if (savesub < 100) + break; + } + + dev_dbg(&pdev->dev, "use rxtx%d as tx clock source for %dHz sample rate", + spdif_priv->txclk_src[index], rate[index]); + dev_dbg(&pdev->dev, "use divisor %d for %dHz sample rate", + spdif_priv->txclk_div[index], rate[index]); + + return 0; +} + +static int fsl_spdif_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct fsl_spdif_priv *spdif_priv; + struct spdif_mixer_control *ctrl; + struct resource *res; + void __iomem *regs; + int irq, ret, i; + + if (!np) + return -ENODEV; + + spdif_priv = devm_kzalloc(&pdev->dev, + sizeof(struct fsl_spdif_priv) + strlen(np->name) + 1, + GFP_KERNEL); + if (!spdif_priv) + return -ENOMEM; + + strcpy(spdif_priv->name, np->name); + + spdif_priv->pdev = pdev; + + /* Initialize this copy of the CPU DAI driver structure */ + memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai, sizeof(fsl_spdif_dai)); + spdif_priv->cpu_dai_drv.name = spdif_priv->name; + + /* Get the addresses and IRQ */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (IS_ERR(res)) { + dev_err(&pdev->dev, "could not determine device resources\n"); + return PTR_ERR(res); + } + + regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(regs)) { + dev_err(&pdev->dev, "could not map device resources\n"); + return PTR_ERR(regs); + } + + spdif_priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev, + "core", regs, &fsl_spdif_regmap_config); + if (IS_ERR(spdif_priv->regmap)) { + dev_err(&pdev->dev, "regmap init failed\n"); + return PTR_ERR(spdif_priv->regmap); + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq for node %s\n", np->full_name); + return irq; + } + + ret = devm_request_irq(&pdev->dev, irq, spdif_isr, 0, + spdif_priv->name, spdif_priv); + if (ret) { + dev_err(&pdev->dev, "could not claim irq %u\n", irq); + return ret; + } + + /* Select clock source for rx/tx clock */ + spdif_priv->rxclk = devm_clk_get(&pdev->dev, "rxtx1"); + if (IS_ERR(spdif_priv->rxclk)) { + dev_err(&pdev->dev, "no rxtx1 clock in devicetree\n"); + return PTR_ERR(spdif_priv->rxclk); + } + spdif_priv->rxclk_src = DEFAULT_RXCLK_SRC; + + for (i = 0; i < SPDIF_TXRATE_MAX; i++) { + ret = fsl_spdif_probe_txclk(spdif_priv, i); + if (ret) + return ret; + } + + /* Initial spinlock for control data */ + ctrl = &spdif_priv->fsl_spdif_control; + spin_lock_init(&ctrl->ctl_lock); + + /* Init tx channel status default value */ + ctrl->ch_status[0] = + IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_5015; + ctrl->ch_status[1] = IEC958_AES1_CON_DIGDIGCONV_ID; + ctrl->ch_status[2] = 0x00; + ctrl->ch_status[3] = + IEC958_AES3_CON_FS_44100 | IEC958_AES3_CON_CLOCK_1000PPM; + + spdif_priv->dpll_locked = false; + + spdif_priv->dma_params_tx.maxburst = FSL_SPDIF_TXFIFO_WML; + spdif_priv->dma_params_rx.maxburst = FSL_SPDIF_RXFIFO_WML; + spdif_priv->dma_params_tx.addr = res->start + REG_SPDIF_STL; + spdif_priv->dma_params_rx.addr = res->start + REG_SPDIF_SRL; + + /* Register with ASoC */ + dev_set_drvdata(&pdev->dev, spdif_priv); + + ret = snd_soc_register_component(&pdev->dev, &fsl_spdif_component, + &spdif_priv->cpu_dai_drv, 1); + if (ret) { + dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); + goto error_dev; + } + + ret = imx_pcm_dma_init(pdev); + if (ret) { + dev_err(&pdev->dev, "imx_pcm_dma_init failed: %d\n", ret); + goto error_component; + } + + return ret; + +error_component: + snd_soc_unregister_component(&pdev->dev); +error_dev: + dev_set_drvdata(&pdev->dev, NULL); + + return ret; +} + +static int fsl_spdif_remove(struct platform_device *pdev) +{ + imx_pcm_dma_exit(pdev); + snd_soc_unregister_component(&pdev->dev); + dev_set_drvdata(&pdev->dev, NULL); + + return 0; +} + +static const struct of_device_id fsl_spdif_dt_ids[] = { + { .compatible = "fsl,imx35-spdif", }, + {} +}; +MODULE_DEVICE_TABLE(of, fsl_spdif_dt_ids); + +static struct platform_driver fsl_spdif_driver = { + .driver = { + .name = "fsl-spdif-dai", + .owner = THIS_MODULE, + .of_match_table = fsl_spdif_dt_ids, + }, + .probe = fsl_spdif_probe, + .remove = fsl_spdif_remove, +}; + +module_platform_driver(fsl_spdif_driver); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("Freescale S/PDIF CPU DAI Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:fsl-spdif-dai"); diff --git a/sound/soc/fsl/fsl_spdif.h b/sound/soc/fsl/fsl_spdif.h new file mode 100644 index 000000000000..b1266790d117 --- /dev/null +++ b/sound/soc/fsl/fsl_spdif.h @@ -0,0 +1,191 @@ +/* + * fsl_spdif.h - ALSA S/PDIF interface for the Freescale i.MX SoC + * + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * Author: Nicolin Chen + * + * Based on fsl_ssi.h + * Author: Timur Tabi + * Copyright 2007-2008 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef _FSL_SPDIF_DAI_H +#define _FSL_SPDIF_DAI_H + +/* S/PDIF Register Map */ +#define REG_SPDIF_SCR 0x0 /* SPDIF Configuration Register */ +#define REG_SPDIF_SRCD 0x4 /* CDText Control Register */ +#define REG_SPDIF_SRPC 0x8 /* PhaseConfig Register */ +#define REG_SPDIF_SIE 0xc /* InterruptEn Register */ +#define REG_SPDIF_SIS 0x10 /* InterruptStat Register */ +#define REG_SPDIF_SIC 0x10 /* InterruptClear Register */ +#define REG_SPDIF_SRL 0x14 /* SPDIFRxLeft Register */ +#define REG_SPDIF_SRR 0x18 /* SPDIFRxRight Register */ +#define REG_SPDIF_SRCSH 0x1c /* SPDIFRxCChannel_h Register */ +#define REG_SPDIF_SRCSL 0x20 /* SPDIFRxCChannel_l Register */ +#define REG_SPDIF_SRU 0x24 /* UchannelRx Register */ +#define REG_SPDIF_SRQ 0x28 /* QchannelRx Register */ +#define REG_SPDIF_STL 0x2C /* SPDIFTxLeft Register */ +#define REG_SPDIF_STR 0x30 /* SPDIFTxRight Register */ +#define REG_SPDIF_STCSCH 0x34 /* SPDIFTxCChannelCons_h Register */ +#define REG_SPDIF_STCSCL 0x38 /* SPDIFTxCChannelCons_l Register */ +#define REG_SPDIF_SRFM 0x44 /* FreqMeas Register */ +#define REG_SPDIF_STC 0x50 /* SPDIFTxClk Register */ + + +/* SPDIF Configuration register */ +#define SCR_RXFIFO_CTL_OFFSET 23 +#define SCR_RXFIFO_CTL_MASK (1 << SCR_RXFIFO_CTL_OFFSET) +#define SCR_RXFIFO_CTL_ZERO (1 << SCR_RXFIFO_CTL_OFFSET) +#define SCR_RXFIFO_OFF_OFFSET 22 +#define SCR_RXFIFO_OFF_MASK (1 << SCR_RXFIFO_OFF_OFFSET) +#define SCR_RXFIFO_OFF (1 << SCR_RXFIFO_OFF_OFFSET) +#define SCR_RXFIFO_RST_OFFSET 21 +#define SCR_RXFIFO_RST_MASK (1 << SCR_RXFIFO_RST_OFFSET) +#define SCR_RXFIFO_RST (1 << SCR_RXFIFO_RST_OFFSET) +#define SCR_RXFIFO_FSEL_OFFSET 19 +#define SCR_RXFIFO_FSEL_MASK (0x3 << SCR_RXFIFO_FSEL_OFFSET) +#define SCR_RXFIFO_FSEL_IF0 (0x0 << SCR_RXFIFO_FSEL_OFFSET) +#define SCR_RXFIFO_FSEL_IF4 (0x1 << SCR_RXFIFO_FSEL_OFFSET) +#define SCR_RXFIFO_FSEL_IF8 (0x2 << SCR_RXFIFO_FSEL_OFFSET) +#define SCR_RXFIFO_FSEL_IF12 (0x3 << SCR_RXFIFO_FSEL_OFFSET) +#define SCR_RXFIFO_AUTOSYNC_OFFSET 18 +#define SCR_RXFIFO_AUTOSYNC_MASK (1 << SCR_RXFIFO_AUTOSYNC_OFFSET) +#define SCR_RXFIFO_AUTOSYNC (1 << SCR_RXFIFO_AUTOSYNC_OFFSET) +#define SCR_TXFIFO_AUTOSYNC_OFFSET 17 +#define SCR_TXFIFO_AUTOSYNC_MASK (1 << SCR_TXFIFO_AUTOSYNC_OFFSET) +#define SCR_TXFIFO_AUTOSYNC (1 << SCR_TXFIFO_AUTOSYNC_OFFSET) +#define SCR_TXFIFO_FSEL_OFFSET 15 +#define SCR_TXFIFO_FSEL_MASK (0x3 << SCR_TXFIFO_FSEL_OFFSET) +#define SCR_TXFIFO_FSEL_IF0 (0x0 << SCR_TXFIFO_FSEL_OFFSET) +#define SCR_TXFIFO_FSEL_IF4 (0x1 << SCR_TXFIFO_FSEL_OFFSET) +#define SCR_TXFIFO_FSEL_IF8 (0x2 << SCR_TXFIFO_FSEL_OFFSET) +#define SCR_TXFIFO_FSEL_IF12 (0x3 << SCR_TXFIFO_FSEL_OFFSET) +#define SCR_LOW_POWER (1 << 13) +#define SCR_SOFT_RESET (1 << 12) +#define SCR_TXFIFO_CTRL_OFFSET 10 +#define SCR_TXFIFO_CTRL_MASK (0x3 << SCR_TXFIFO_CTRL_OFFSET) +#define SCR_TXFIFO_CTRL_ZERO (0x0 << SCR_TXFIFO_CTRL_OFFSET) +#define SCR_TXFIFO_CTRL_NORMAL (0x1 << SCR_TXFIFO_CTRL_OFFSET) +#define SCR_TXFIFO_CTRL_ONESAMPLE (0x2 << SCR_TXFIFO_CTRL_OFFSET) +#define SCR_DMA_RX_EN_OFFSET 9 +#define SCR_DMA_RX_EN_MASK (1 << SCR_DMA_RX_EN_OFFSET) +#define SCR_DMA_RX_EN (1 << SCR_DMA_RX_EN_OFFSET) +#define SCR_DMA_TX_EN_OFFSET 8 +#define SCR_DMA_TX_EN_MASK (1 << SCR_DMA_TX_EN_OFFSET) +#define SCR_DMA_TX_EN (1 << SCR_DMA_TX_EN_OFFSET) +#define SCR_VAL_OFFSET 5 +#define SCR_VAL_MASK (1 << SCR_VAL_OFFSET) +#define SCR_VAL_CLEAR (1 << SCR_VAL_OFFSET) +#define SCR_TXSEL_OFFSET 2 +#define SCR_TXSEL_MASK (0x7 << SCR_TXSEL_OFFSET) +#define SCR_TXSEL_OFF (0 << SCR_TXSEL_OFFSET) +#define SCR_TXSEL_RX (1 << SCR_TXSEL_OFFSET) +#define SCR_TXSEL_NORMAL (0x5 << SCR_TXSEL_OFFSET) +#define SCR_USRC_SEL_OFFSET 0x0 +#define SCR_USRC_SEL_MASK (0x3 << SCR_USRC_SEL_OFFSET) +#define SCR_USRC_SEL_NONE (0x0 << SCR_USRC_SEL_OFFSET) +#define SCR_USRC_SEL_RECV (0x1 << SCR_USRC_SEL_OFFSET) +#define SCR_USRC_SEL_CHIP (0x3 << SCR_USRC_SEL_OFFSET) + +/* SPDIF CDText control */ +#define SRCD_CD_USER_OFFSET 1 +#define SRCD_CD_USER (1 << SRCD_CD_USER_OFFSET) + +/* SPDIF Phase Configuration register */ +#define SRPC_DPLL_LOCKED (1 << 6) +#define SRPC_CLKSRC_SEL_OFFSET 7 +#define SRPC_CLKSRC_SEL_MASK (0xf << SRPC_CLKSRC_SEL_OFFSET) +#define SRPC_CLKSRC_SEL_SET(x) ((x << SRPC_CLKSRC_SEL_OFFSET) & SRPC_CLKSRC_SEL_MASK) +#define SRPC_CLKSRC_SEL_LOCKED_OFFSET1 5 +#define SRPC_CLKSRC_SEL_LOCKED_OFFSET2 2 +#define SRPC_GAINSEL_OFFSET 3 +#define SRPC_GAINSEL_MASK (0x7 << SRPC_GAINSEL_OFFSET) +#define SRPC_GAINSEL_SET(x) ((x << SRPC_GAINSEL_OFFSET) & SRPC_GAINSEL_MASK) + +#define SRPC_CLKSRC_MAX 16 + +enum spdif_gainsel { + GAINSEL_MULTI_24 = 0, + GAINSEL_MULTI_16, + GAINSEL_MULTI_12, + GAINSEL_MULTI_8, + GAINSEL_MULTI_6, + GAINSEL_MULTI_4, + GAINSEL_MULTI_3, +}; +#define GAINSEL_MULTI_MAX (GAINSEL_MULTI_3 + 1) +#define SPDIF_DEFAULT_GAINSEL GAINSEL_MULTI_8 + +/* SPDIF interrupt mask define */ +#define INT_DPLL_LOCKED (1 << 20) +#define INT_TXFIFO_UNOV (1 << 19) +#define INT_TXFIFO_RESYNC (1 << 18) +#define INT_CNEW (1 << 17) +#define INT_VAL_NOGOOD (1 << 16) +#define INT_SYM_ERR (1 << 15) +#define INT_BIT_ERR (1 << 14) +#define INT_URX_FUL (1 << 10) +#define INT_URX_OV (1 << 9) +#define INT_QRX_FUL (1 << 8) +#define INT_QRX_OV (1 << 7) +#define INT_UQ_SYNC (1 << 6) +#define INT_UQ_ERR (1 << 5) +#define INT_RXFIFO_UNOV (1 << 4) +#define INT_RXFIFO_RESYNC (1 << 3) +#define INT_LOSS_LOCK (1 << 2) +#define INT_TX_EM (1 << 1) +#define INT_RXFIFO_FUL (1 << 0) + +/* SPDIF Clock register */ +#define STC_SYSCLK_DIV_OFFSET 11 +#define STC_SYSCLK_DIV_MASK (0x1ff << STC_TXCLK_SRC_OFFSET) +#define STC_SYSCLK_DIV(x) ((((x) - 1) << STC_TXCLK_DIV_OFFSET) & STC_SYSCLK_DIV_MASK) +#define STC_TXCLK_SRC_OFFSET 8 +#define STC_TXCLK_SRC_MASK (0x7 << STC_TXCLK_SRC_OFFSET) +#define STC_TXCLK_SRC_SET(x) ((x << STC_TXCLK_SRC_OFFSET) & STC_TXCLK_SRC_MASK) +#define STC_TXCLK_ALL_EN_OFFSET 7 +#define STC_TXCLK_ALL_EN_MASK (1 << STC_TXCLK_ALL_EN_OFFSET) +#define STC_TXCLK_ALL_EN (1 << STC_TXCLK_ALL_EN_OFFSET) +#define STC_TXCLK_DIV_OFFSET 0 +#define STC_TXCLK_DIV_MASK (0x7ff << STC_TXCLK_DIV_OFFSET) +#define STC_TXCLK_DIV(x) ((((x) - 1) << STC_TXCLK_DIV_OFFSET) & STC_TXCLK_DIV_MASK) +#define STC_TXCLK_SRC_MAX 8 + +/* SPDIF tx rate */ +enum spdif_txrate { + SPDIF_TXRATE_32000 = 0, + SPDIF_TXRATE_44100, + SPDIF_TXRATE_48000, +}; +#define SPDIF_TXRATE_MAX (SPDIF_TXRATE_48000 + 1) + + +#define SPDIF_CSTATUS_BYTE 6 +#define SPDIF_UBITS_SIZE 96 +#define SPDIF_QSUB_SIZE (SPDIF_UBITS_SIZE / 8) + + +#define FSL_SPDIF_RATES_PLAYBACK (SNDRV_PCM_RATE_32000 | \ + SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000) + +#define FSL_SPDIF_RATES_CAPTURE (SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_32000 | \ + SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_64000 | \ + SNDRV_PCM_RATE_96000) + +#define FSL_SPDIF_FORMATS_PLAYBACK (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + +#define FSL_SPDIF_FORMATS_CAPTURE (SNDRV_PCM_FMTBIT_S24_LE) + +#endif /* _FSL_SPDIF_DAI_H */