korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-15 06:55:13 +08:00
Code Issues Packages Projects Releases Wiki Activity

media: ov5640: Fix initial RESETB state and annotate timings

Browse Source 
The initial state of RESETB input signal of OV5640 should be
asserted, i.e. the sensor should be in reset. This is not the
case, make it so.

Since the subsequent assertion of RESETB signal is no longer
necessary and the timing of the power sequencing could be
slightly adjusted, add annotations to the delays which match
OV5640 datasheet rev. 2.03, both:
  figure 2-3 power up timing with internal DVDD
  figure 2-4 power up timing with external DVDD source

The 5..10ms delay between PWDN assertion and RESETB assertion
is not even documented in the power sequencing diagram, and
with this reset fix, it is no longer even necessary.

Fixes: 19a81c1426 ("[media] add Omnivision OV5640 sensor driver")
Reported-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This commit is contained in:
Marek Vasut 2023-07-25 00:21:16 +02:00 committed by Mauro Carvalho Chehab
parent 90fbb259b4
commit a210df337c
1 changed files with 4 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
drivers/media/i2c/ov5640.c
View File

@ -2452,16 +2452,13 @@ static void ov5640_power(struct ov5640_dev *sensor, bool enable)
static void ov5640_powerup_sequence(struct ov5640_dev *sensor)
{
if (sensor->pwdn_gpio) {
gpiod_set_value_cansleep(sensor->reset_gpio, 0);
gpiod_set_value_cansleep(sensor->reset_gpio, 1);
/* camera power cycle */
ov5640_power(sensor, false);
usleep_range(5000, 10000);
usleep_range(5000, 10000); /* t2 */
ov5640_power(sensor, true);
usleep_range(5000, 10000);
gpiod_set_value_cansleep(sensor->reset_gpio, 1);
usleep_range(1000, 2000);
usleep_range(1000, 2000); /* t3 */
gpiod_set_value_cansleep(sensor->reset_gpio, 0);
} else {
@ -2469,7 +2466,7 @@ static void ov5640_powerup_sequence(struct ov5640_dev *sensor)
ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0,
OV5640_REG_SYS_CTRL0_SW_RST);
}
usleep_range(20000, 25000);
usleep_range(20000, 25000); /* t4 */
/*
* software standby: allows registers programming;