diff --git a/arch/x86/lib/insn-eval.c b/arch/x86/lib/insn-eval.c index ef102db43289..35625d279458 100644 --- a/arch/x86/lib/insn-eval.c +++ b/arch/x86/lib/insn-eval.c @@ -480,6 +480,80 @@ static int get_reg_offset(struct insn *insn, struct pt_regs *regs, return regoff[regno]; } +/** + * get_reg_offset_16() - Obtain offset of register indicated by instruction + * @insn: Instruction containing ModRM byte + * @regs: Register values as seen when entering kernel mode + * @offs1: Offset of the first operand register + * @offs2: Offset of the second opeand register, if applicable + * + * Obtain the offset, in pt_regs, of the registers indicated by the ModRM byte + * in @insn. This function is to be used with 16-bit address encodings. The + * @offs1 and @offs2 will be written with the offset of the two registers + * indicated by the instruction. In cases where any of the registers is not + * referenced by the instruction, the value will be set to -EDOM. + * + * Returns: + * + * 0 on success, -EINVAL on error. + */ +static int get_reg_offset_16(struct insn *insn, struct pt_regs *regs, + int *offs1, int *offs2) +{ + /* + * 16-bit addressing can use one or two registers. Specifics of + * encodings are given in Table 2-1. "16-Bit Addressing Forms with the + * ModR/M Byte" of the Intel Software Development Manual. + */ + static const int regoff1[] = { + offsetof(struct pt_regs, bx), + offsetof(struct pt_regs, bx), + offsetof(struct pt_regs, bp), + offsetof(struct pt_regs, bp), + offsetof(struct pt_regs, si), + offsetof(struct pt_regs, di), + offsetof(struct pt_regs, bp), + offsetof(struct pt_regs, bx), + }; + + static const int regoff2[] = { + offsetof(struct pt_regs, si), + offsetof(struct pt_regs, di), + offsetof(struct pt_regs, si), + offsetof(struct pt_regs, di), + -EDOM, + -EDOM, + -EDOM, + -EDOM, + }; + + if (!offs1 || !offs2) + return -EINVAL; + + /* Operand is a register, use the generic function. */ + if (X86_MODRM_MOD(insn->modrm.value) == 3) { + *offs1 = insn_get_modrm_rm_off(insn, regs); + *offs2 = -EDOM; + return 0; + } + + *offs1 = regoff1[X86_MODRM_RM(insn->modrm.value)]; + *offs2 = regoff2[X86_MODRM_RM(insn->modrm.value)]; + + /* + * If ModRM.mod is 0 and ModRM.rm is 110b, then we use displacement- + * only addressing. This means that no registers are involved in + * computing the effective address. Thus, ensure that the first + * register offset is invalild. The second register offset is already + * invalid under the aforementioned conditions. + */ + if ((X86_MODRM_MOD(insn->modrm.value) == 0) && + (X86_MODRM_RM(insn->modrm.value) == 6)) + *offs1 = -EDOM; + + return 0; +} + /** * get_desc() - Obtain pointer to a segment descriptor * @sel: Segment selector @@ -815,7 +889,9 @@ static int get_eff_addr_reg(struct insn *insn, struct pt_regs *regs, return -EINVAL; /* Ignore bytes that are outside the address size. */ - if (insn->addr_bytes == 4) + if (insn->addr_bytes == 2) + *eff_addr = regs_get_register(regs, *regoff) & 0xffff; + else if (insn->addr_bytes == 4) *eff_addr = regs_get_register(regs, *regoff) & 0xffffffff; else /* 64-bit address */ *eff_addr = regs_get_register(regs, *regoff); @@ -890,6 +966,74 @@ static int get_eff_addr_modrm(struct insn *insn, struct pt_regs *regs, return 0; } +/** + * get_eff_addr_modrm_16() - Obtain referenced effective address via ModRM + * @insn: Instruction. Must be valid. + * @regs: Register values as seen when entering kernel mode + * @regoff: Obtained operand offset, in pt_regs, associated with segment + * @eff_addr: Obtained effective address + * + * Obtain the 16-bit effective address referenced by the ModRM byte of @insn. + * After identifying the registers involved in the register-indirect memory + * reference, its value is obtained from the operands in @regs. The computed + * address is stored @eff_addr. Also, the register operand that indicates + * the associated segment is stored in @regoff, this parameter can later be used + * to determine such segment. + * + * Returns: + * + * 0 on success. @eff_addr will have the referenced effective address. @regoff + * will have a register, as an offset from the base of pt_regs, that can be used + * to resolve the associated segment. + * + * -EINVAL on error. + */ +static int get_eff_addr_modrm_16(struct insn *insn, struct pt_regs *regs, + int *regoff, short *eff_addr) +{ + int addr_offset1, addr_offset2, ret; + short addr1 = 0, addr2 = 0, displacement; + + if (insn->addr_bytes != 2) + return -EINVAL; + + insn_get_modrm(insn); + + if (!insn->modrm.nbytes) + return -EINVAL; + + if (X86_MODRM_MOD(insn->modrm.value) > 2) + return -EINVAL; + + ret = get_reg_offset_16(insn, regs, &addr_offset1, &addr_offset2); + if (ret < 0) + return -EINVAL; + + /* + * Don't fail on invalid offset values. They might be invalid because + * they cannot be used for this particular value of ModRM. Instead, use + * them in the computation only if they contain a valid value. + */ + if (addr_offset1 != -EDOM) + addr1 = regs_get_register(regs, addr_offset1) & 0xffff; + + if (addr_offset2 != -EDOM) + addr2 = regs_get_register(regs, addr_offset2) & 0xffff; + + displacement = insn->displacement.value & 0xffff; + *eff_addr = addr1 + addr2 + displacement; + + /* + * The first operand register could indicate to use of either SS or DS + * registers to obtain the segment selector. The second operand + * register can only indicate the use of DS. Thus, the first operand + * will be used to obtain the segment selector. + */ + *regoff = addr_offset1; + + return 0; +} + /** * get_eff_addr_sib() - Obtain referenced effective address via SIB * @insn: Instruction. Must be valid. @@ -974,6 +1118,71 @@ static int get_eff_addr_sib(struct insn *insn, struct pt_regs *regs, return 0; } +/** + * get_addr_ref_16() - Obtain the 16-bit address referred by instruction + * @insn: Instruction containing ModRM byte and displacement + * @regs: Register values as seen when entering kernel mode + * + * This function is to be used with 16-bit address encodings. Obtain the memory + * address referred by the instruction's ModRM and displacement bytes. Also, the + * segment used as base is determined by either any segment override prefixes in + * @insn or the default segment of the registers involved in the address + * computation. In protected mode, segment limits are enforced. + * + * Returns: + * + * Linear address referenced by the instruction operands on success. + * + * -1L on error. + */ +static void __user *get_addr_ref_16(struct insn *insn, struct pt_regs *regs) +{ + unsigned long linear_addr = -1L, seg_base, seg_limit; + int ret, regoff; + short eff_addr; + long tmp; + + insn_get_modrm(insn); + insn_get_displacement(insn); + + if (insn->addr_bytes != 2) + goto out; + + if (X86_MODRM_MOD(insn->modrm.value) == 3) { + ret = get_eff_addr_reg(insn, regs, ®off, &tmp); + if (ret) + goto out; + + eff_addr = tmp; + } else { + ret = get_eff_addr_modrm_16(insn, regs, ®off, &eff_addr); + if (ret) + goto out; + } + + ret = get_seg_base_limit(insn, regs, regoff, &seg_base, &seg_limit); + if (ret) + goto out; + + /* + * Before computing the linear address, make sure the effective address + * is within the limits of the segment. In virtual-8086 mode, segment + * limits are not enforced. In such a case, the segment limit is -1L to + * reflect this fact. + */ + if ((unsigned long)(eff_addr & 0xffff) > seg_limit) + goto out; + + linear_addr = (unsigned long)(eff_addr & 0xffff) + seg_base; + + /* Limit linear address to 20 bits */ + if (v8086_mode(regs)) + linear_addr &= 0xfffff; + +out: + return (void __user *)linear_addr; +} + /** * get_addr_ref_32() - Obtain a 32-bit linear address * @insn: Instruction with ModRM, SIB bytes and displacement @@ -1143,6 +1352,8 @@ void __user *insn_get_addr_ref(struct insn *insn, struct pt_regs *regs) return (void __user *)-1L; switch (insn->addr_bytes) { + case 2: + return get_addr_ref_16(insn, regs); case 4: return get_addr_ref_32(insn, regs); case 8: