korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 16:54:20 +08:00
Code Issues Packages Projects Releases Wiki Activity

ARM: pxa: Push Colibri evalboard MFP into module files

Browse Source 
This change -- pushing the MFP configuration back into Module files -- is
necessary because some evalboards can be used with multiple modules, where MFP
differs from module to module. Therefore MFP isn't board-specific, but
module-specific and the module should preconfigure itself for the board.

(And there is also the C preprocesor limitation and conflicting #define-s)

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
This commit is contained in:
Marek Vasut 2010-08-12 01:18:38 +02:00 committed by Eric Miao
parent 960c0acaab
commit 9b6956f451
8 changed files with 188 additions and 252 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
arch/arm/mach-pxa/Kconfig
View File

@ -236,10 +236,6 @@ config MACH_COLIBRI
bool "Toradex Colibri PXA270"
select PXA27x
config MACH_COLIBRI_PXA270_EVALBOARD
bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
depends on MACH_COLIBRI
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
@ -257,6 +253,10 @@ config MACH_COLIBRI320
select PXA3xx
select CPU_PXA320
config MACH_COLIBRI_PXA270_EVALBOARD
bool "Toradex Colibri Evaluation Carrier Board support"
depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
config MACH_VPAC270
bool "Voipac PXA270"
select PXA27x

61
arch/arm/mach-pxa/colibri-pxa270-evalboard.c
View File

@ -29,48 +29,6 @@
#include "generic.h"
#include "devices.h"
/******************************************************************************
* Pin configuration
******************************************************************************/
static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO0_GPIO, /* SD detect */
/* FFUART */
GPIO39_FFUART_TXD,
GPIO34_FFUART_RXD,
/* UHC */
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
GPIO119_USBH2_PWR,
GPIO120_USBH2_PEN,
/* PCMCIA */
GPIO85_nPCE_1,
GPIO54_nPCE_2,
GPIO55_nPREG,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO49_nPWE,
GPIO48_nPOE,
GPIO57_nIOIS16,
GPIO56_nPWAIT,
GPIO104_PSKTSEL,
GPIO53_GPIO, /* RESET */
GPIO83_GPIO, /* BVD1 */
GPIO82_GPIO, /* BVD2 */
GPIO1_GPIO, /* READY */
GPIO84_GPIO, /* DETECT */
GPIO107_GPIO, /* PPEN */
};
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
@ -78,13 +36,22 @@ static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_power = -1,
.gpio_card_detect = GPIO0_COLIBRI_PXA270_SD_DETECT,
.gpio_card_ro = -1,
.detect_delay_ms = 200,
};
static void __init colibri_pxa270_mmc_init(void)
{
if (machine_is_colibri()) /* PXA270 Colibri */
colibri_pxa270_mci_platform_data.gpio_card_detect =
GPIO0_COLIBRI_PXA270_SD_DETECT;
if (machine_is_colibri300()) /* PXA300 Colibri */
colibri_pxa270_mci_platform_data.gpio_card_detect =
GPIO39_COLIBRI_PXA300_SD_DETECT;
else /* PXA320 Colibri */
colibri_pxa270_mci_platform_data.gpio_card_detect =
GPIO28_COLIBRI_PXA320_SD_DETECT;
pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
}
#else
@ -103,13 +70,17 @@ static int colibri_pxa270_ohci_init(struct device *dev)
static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT2 |
.flags = ENABLE_PORT1 |
POWER_CONTROL_LOW | POWER_SENSE_LOW,
.init = colibri_pxa270_ohci_init,
};
static void __init colibri_pxa270_uhc_init(void)
{
/* Colibri PXA270 has two usb ports, TBA for 320 */
if (machine_is_colibri())
colibri_pxa270_ohci_info.flags |= ENABLE_PORT2;
pxa_set_ohci_info(&colibri_pxa270_ohci_info);
}
#else
@ -118,7 +89,6 @@ static inline void colibri_pxa270_uhc_init(void) {}
void __init colibri_pxa270_evalboard_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
@ -126,4 +96,3 @@ void __init colibri_pxa270_evalboard_init(void)
colibri_pxa270_mmc_init();
colibri_pxa270_uhc_init();
}

47
arch/arm/mach-pxa/colibri-pxa270-income.c
View File

@ -45,52 +45,6 @@
#define GPIO55_INCOME_LED_B (55)
#define GPIO113_INCOME_TS_IRQ (113)
/******************************************************************************
* Pin configuration
******************************************************************************/
static mfp_cfg_t income_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO0_GPIO, /* SD detect */
GPIO1_GPIO, /* SD read-only */
/* FFUART */
GPIO39_FFUART_TXD,
GPIO34_FFUART_RXD,
/* BFUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* UHC */
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
/* LCD */
GPIOxx_LCD_TFT_16BPP,
/* PWM */
GPIO16_PWM0_OUT,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* LED */
GPIO54_GPIO, /* LED A */
GPIO55_GPIO, /* LED B */
};
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
@ -257,7 +211,6 @@ static inline void income_pwm_init(void) {}
void __init colibri_pxa270_income_boardinit(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);

96
arch/arm/mach-pxa/colibri-pxa270.c
View File

@ -32,6 +32,99 @@
#include "devices.h"
#include "generic.h"
/******************************************************************************
* Evaluation board MFP
******************************************************************************/
#ifdef CONFIG_MACH_COLIBRI_PXA270_EVALBOARD
static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO0_GPIO, /* SD detect */
/* FFUART */
GPIO39_FFUART_TXD,
GPIO34_FFUART_RXD,
/* UHC */
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
GPIO119_USBH2_PWR,
GPIO120_USBH2_PEN,
/* PCMCIA */
GPIO85_nPCE_1,
GPIO54_nPCE_2,
GPIO55_nPREG,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO49_nPWE,
GPIO48_nPOE,
GPIO57_nIOIS16,
GPIO56_nPWAIT,
GPIO104_PSKTSEL,
GPIO53_GPIO, /* RESET */
GPIO83_GPIO, /* BVD1 */
GPIO82_GPIO, /* BVD2 */
GPIO1_GPIO, /* READY */
GPIO84_GPIO, /* DETECT */
GPIO107_GPIO, /* PPEN */
};
#else
static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
#endif
#ifdef CONFIG_MACH_COLIBRI_PXA270_INCOME
static mfp_cfg_t income_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO0_GPIO, /* SD detect */
GPIO1_GPIO, /* SD read-only */
/* FFUART */
GPIO39_FFUART_TXD,
GPIO34_FFUART_RXD,
/* BFUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* UHC */
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
/* LCD */
GPIOxx_LCD_TFT_16BPP,
/* PWM */
GPIO16_PWM0_OUT,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* LED */
GPIO54_GPIO, /* LED A */
GPIO55_GPIO, /* LED B */
};
#else
static mfp_cfg_t income_pin_config[] __initdata = {};
#endif
/******************************************************************************
* Pin configuration
******************************************************************************/
@ -185,9 +278,12 @@ static void __init colibri_pxa270_init(void)
switch (colibri_pxa270_baseboard) {
case COLIBRI_PXA270_EVALBOARD:
pxa2xx_mfp_config(ARRAY_AND_SIZE(
colibri_pxa270_evalboard_pin_config));
colibri_pxa270_evalboard_init();
break;
case COLIBRI_PXA270_INCOME:
pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
colibri_pxa270_income_boardinit();
break;
default:

61
arch/arm/mach-pxa/colibri-pxa300.c
View File

@ -31,9 +31,28 @@
#include "generic.h"
#include "devices.h"
#ifdef CONFIG_MACH_COLIBRI_PXA270_EVALBOARD
static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
/* MMC */
GPIO7_MMC1_CLK,
GPIO14_MMC1_CMD,
GPIO3_MMC1_DAT0,
GPIO4_MMC1_DAT1,
GPIO5_MMC1_DAT2,
GPIO6_MMC1_DAT3,
GPIO39_GPIO, /* SD detect */
/* UHC */
GPIO0_2_USBH_PEN,
GPIO1_2_USBH_PWR,
};
#else
static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
#endif
#if defined(CONFIG_AX88796)
#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO)
/*
* Asix AX88796 Ethernet
*/
@ -80,35 +99,6 @@ static void __init colibri_pxa300_init_eth(void)
static inline void __init colibri_pxa300_init_eth(void) {}
#endif /* CONFIG_AX88796 */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static mfp_cfg_t colibri_pxa300_usb_pin_config[] __initdata = {
GPIO0_2_USBH_PEN,
GPIO1_2_USBH_PWR,
};
static struct pxaohci_platform_data colibri_pxa300_ohci_info = {
.port_mode = PMM_GLOBAL_MODE,
.flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
void __init colibri_pxa300_init_ohci(void)
{
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_usb_pin_config));
pxa_set_ohci_info(&colibri_pxa300_ohci_info);
}
#else
static inline void colibri_pxa300_init_ohci(void) {}
#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
static mfp_cfg_t colibri_pxa300_mmc_pin_config[] __initdata = {
GPIO7_MMC1_CLK,
GPIO14_MMC1_CMD,
GPIO3_MMC1_DAT0,
GPIO4_MMC1_DAT1,
GPIO5_MMC1_DAT2,
GPIO6_MMC1_DAT3,
};
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
GPIO54_LCD_LDD_0,
@ -171,18 +161,15 @@ static inline void colibri_pxa310_init_ac97(void) {}
void __init colibri_pxa300_init(void)
{
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
colibri_pxa300_init_eth();
colibri_pxa300_init_ohci();
colibri_pxa3xx_init_nand();
colibri_pxa300_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
colibri_pxa310_init_ac97();
colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
mfp_to_gpio(MFP_PIN_GPIO13));
/* Evalboard init */
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
colibri_pxa270_evalboard_init();
}
MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")

112
arch/arm/mach-pxa/colibri-pxa320.c
View File

@ -35,9 +35,47 @@
#include "generic.h"
#include "devices.h"
#ifdef CONFIG_MACH_COLIBRI_PXA270_EVALBOARD
static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
/* MMC */
GPIO22_MMC1_CLK,
GPIO23_MMC1_CMD,
GPIO18_MMC1_DAT0,
GPIO19_MMC1_DAT1,
GPIO20_MMC1_DAT2,
GPIO21_MMC1_DAT3,
GPIO28_GPIO, /* SD detect */
/* UART 1 configuration (may be set by bootloader) */
GPIO99_UART1_CTS,
GPIO104_UART1_RTS,
GPIO97_UART1_RXD,
GPIO98_UART1_TXD,
GPIO101_UART1_DTR,
GPIO103_UART1_DSR,
GPIO100_UART1_DCD,
GPIO102_UART1_RI,
/* UART 2 configuration */
GPIO109_UART2_CTS,
GPIO112_UART2_RTS,
GPIO110_UART2_RXD,
GPIO111_UART2_TXD,
/* UART 3 configuration */
GPIO30_UART3_RXD,
GPIO31_UART3_TXD,
/* UHC */
GPIO2_2_USBH_PEN,
GPIO3_2_USBH_PWR,
};
#else
static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
#endif
#if defined(CONFIG_AX88796)
#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO36_GPIO)
/*
* Asix AX88796 Ethernet
*/
@ -84,26 +122,6 @@ static void __init colibri_pxa320_init_eth(void)
static inline void __init colibri_pxa320_init_eth(void) {}
#endif /* CONFIG_AX88796 */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static mfp_cfg_t colibri_pxa320_usb_pin_config[] __initdata = {
GPIO2_2_USBH_PEN,
GPIO3_2_USBH_PWR,
};
static struct pxaohci_platform_data colibri_pxa320_ohci_info = {
.port_mode = PMM_GLOBAL_MODE,
.flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
void __init colibri_pxa320_init_ohci(void)
{
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_usb_pin_config));
pxa_set_ohci_info(&colibri_pxa320_ohci_info);
}
#else
static inline void colibri_pxa320_init_ohci(void) {}
#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
.gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96),
@ -140,15 +158,6 @@ static void __init colibri_pxa320_init_udc(void)
static inline void colibri_pxa320_init_udc(void) {}
#endif
static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
GPIO22_MMC1_CLK,
GPIO23_MMC1_CMD,
GPIO18_MMC1_DAT0,
GPIO19_MMC1_DAT1,
GPIO20_MMC1_DAT2,
GPIO21_MMC1_DAT3
};
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
GPIO6_2_LCD_LDD_0,
@ -205,53 +214,18 @@ static inline void __init colibri_pxa320_init_ac97(void)
static inline void colibri_pxa320_init_ac97(void) {}
#endif
/*
* The following configuration is verified to work with the Toradex Orchid
* carrier board
*/
static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = {
/* UART 1 configuration (may be set by bootloader) */
GPIO99_UART1_CTS,
GPIO104_UART1_RTS,
GPIO97_UART1_RXD,
GPIO98_UART1_TXD,
GPIO101_UART1_DTR,
GPIO103_UART1_DSR,
GPIO100_UART1_DCD,
GPIO102_UART1_RI,
/* UART 2 configuration */
GPIO109_UART2_CTS,
GPIO112_UART2_RTS,
GPIO110_UART2_RXD,
GPIO111_UART2_TXD,
/* UART 3 configuration */
GPIO30_UART3_RXD,
GPIO31_UART3_TXD,
};
static void __init colibri_pxa320_init_uart(void)
{
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config));
}
void __init colibri_pxa320_init(void)
{
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
colibri_pxa320_init_eth();
colibri_pxa320_init_ohci();
colibri_pxa3xx_init_nand();
colibri_pxa320_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
colibri_pxa320_init_ac97();
colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
mfp_to_gpio(MFP_PIN_GPIO28));
colibri_pxa320_init_uart();
colibri_pxa320_init_udc();
/* Evalboard init */
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
colibri_pxa270_evalboard_init();
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")

49
arch/arm/mach-pxa/colibri-pxa3xx.c
View File

@ -64,55 +64,6 @@ void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
}
#endif
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static int mmc_detect_pin;
static int colibri_pxa3xx_mci_init(struct device *dev,
irq_handler_t colibri_mmc_detect_int,
void *data)
{
int ret;
ret = gpio_request(mmc_detect_pin, "mmc card detect");
if (ret)
return ret;
gpio_direction_input(mmc_detect_pin);
ret = request_irq(gpio_to_irq(mmc_detect_pin), colibri_mmc_detect_int,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (ret) {
gpio_free(mmc_detect_pin);
return ret;
}
return 0;
}
static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
{
free_irq(mmc_detect_pin, data);
gpio_free(gpio_to_irq(mmc_detect_pin));
}
static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
.detect_delay_ms = 200,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.init = colibri_pxa3xx_mci_init,
.exit = colibri_pxa3xx_mci_exit,
.gpio_card_detect = -1,
.gpio_card_ro = -1,
.gpio_power = -1,
};
void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
{
pxa3xx_mfp_config(pins, len);
mmc_detect_pin = detect_pin;
pxa_set_mci_info(&colibri_pxa3xx_mci_platform_data);
}
#endif /* CONFIG_MMC_PXA || CONFIG_MMC_PXA_MODULE */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static int lcd_bl_pin;

6
arch/arm/mach-pxa/include/mach/colibri.h
View File

@ -59,5 +59,11 @@ static inline void colibri_pxa3xx_init_nand(void) {}
#define GPIO0_COLIBRI_PXA270_SD_DETECT 0
#define GPIO113_COLIBRI_PXA270_TS_IRQ 113
/* GPIO definitions for Colibri PXA300/310 */
#define GPIO39_COLIBRI_PXA300_SD_DETECT 39
/* GPIO definitions for Colibri PXA320 */
#define GPIO28_COLIBRI_PXA320_SD_DETECT 28
#endif /* _COLIBRI_H_ */