korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-09-21 20:22:13 +08:00
Code Issues Packages Projects Releases Wiki Activity

spi: spi-nxp-fspi: use DLL calibration when clock rate > 100MHz

Browse Source 
When clock rate > 100MHz, use the DLL calibration mode, and finally
add the suggested half of the current clock cycle to sample the data.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20230322090451.3179431-2-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Haibo Chen 2023-03-22 17:04:51 +08:00 committed by Mark Brown
parent 1ab09f1d07
commit 99d822b3ad
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
1 changed files with 52 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

52
drivers/spi/spi-nxp-fspi.c
View File

@ -214,9 +214,15 @@
#define FSPI_DLLACR 0xC0
#define FSPI_DLLACR_OVRDEN BIT(8)
#define FSPI_DLLACR_SLVDLY(x) ((x) << 3)
#define FSPI_DLLACR_DLLRESET BIT(1)
#define FSPI_DLLACR_DLLEN BIT(0)
#define FSPI_DLLBCR 0xC4
#define FSPI_DLLBCR_OVRDEN BIT(8)
#define FSPI_DLLBCR_SLVDLY(x) ((x) << 3)
#define FSPI_DLLBCR_DLLRESET BIT(1)
#define FSPI_DLLBCR_DLLEN BIT(0)
#define FSPI_STS0 0xE0
#define FSPI_STS0_DLPHB(x) ((x) << 8)
@ -231,6 +237,16 @@
#define FSPI_STS1_AHB_ERRCD(x) ((x) << 8)
#define FSPI_STS1_AHB_ERRID(x) (x)
#define FSPI_STS2 0xE8
#define FSPI_STS2_BREFLOCK BIT(17)
#define FSPI_STS2_BSLVLOCK BIT(16)
#define FSPI_STS2_AREFLOCK BIT(1)
#define FSPI_STS2_ASLVLOCK BIT(0)
#define FSPI_STS2_AB_LOCK (FSPI_STS2_BREFLOCK | \
FSPI_STS2_BSLVLOCK | \
FSPI_STS2_AREFLOCK | \
FSPI_STS2_ASLVLOCK)
#define FSPI_AHBSPNST 0xEC
#define FSPI_AHBSPNST_DATLFT(x) ((x) << 16)
#define FSPI_AHBSPNST_BUFID(x) ((x) << 1)
@ -615,6 +631,35 @@ static int nxp_fspi_clk_disable_unprep(struct nxp_fspi *f)
return 0;
}
static void nxp_fspi_dll_calibration(struct nxp_fspi *f)
{
int ret;
/* Reset the DLL, set the DLLRESET to 1 and then set to 0 */
fspi_writel(f, FSPI_DLLACR_DLLRESET, f->iobase + FSPI_DLLACR);
fspi_writel(f, FSPI_DLLBCR_DLLRESET, f->iobase + FSPI_DLLBCR);
fspi_writel(f, 0, f->iobase + FSPI_DLLACR);
fspi_writel(f, 0, f->iobase + FSPI_DLLBCR);
/*
* Enable the DLL calibration mode.
* The delay target for slave delay line is:
* ((SLVDLYTARGET+1) * 1/32 * clock cycle of reference clock.
* When clock rate > 100MHz, recommend SLVDLYTARGET is 0xF, which
* means half of clock cycle of reference clock.
*/
fspi_writel(f, FSPI_DLLACR_DLLEN | FSPI_DLLACR_SLVDLY(0xF),
f->iobase + FSPI_DLLACR);
fspi_writel(f, FSPI_DLLBCR_DLLEN | FSPI_DLLBCR_SLVDLY(0xF),
f->iobase + FSPI_DLLBCR);
/* Wait to get REF/SLV lock */
ret = fspi_readl_poll_tout(f, f->iobase + FSPI_STS2, FSPI_STS2_AB_LOCK,
0, POLL_TOUT, true);
if (ret)
dev_warn(f->dev, "DLL lock failed, please fix it!\n");
}
/*
* In FlexSPI controller, flash access is based on value of FSPI_FLSHXXCR0
* register and start base address of the slave device.
@ -690,6 +735,13 @@ static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi)
if (ret)
return;
/*
* If clock rate > 100MHz, then switch from DLL override mode to
* DLL calibration mode.
*/
if (rate > 100000000)
nxp_fspi_dll_calibration(f);
f->selected = spi_get_chipselect(spi, 0);
}