diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml new file mode 100644 index 000000000000..c54ac059043f --- /dev/null +++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/renesas,rspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas (Quad) Serial Peripheral Interface (RSPI/QSPI) + +maintainers: + - Geert Uytterhoeven + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,rspi-sh7757 # SH7757 + - const: renesas,rspi # Legacy SH + + - items: + - enum: + - renesas,rspi-r7s72100 # RZ/A1H + - renesas,rspi-r7s9210 # RZ/A2 + - const: renesas,rspi-rz # RZ/A + + - items: + - enum: + - renesas,qspi-r8a7743 # RZ/G1M + - renesas,qspi-r8a7744 # RZ/G1N + - renesas,qspi-r8a7745 # RZ/G1E + - renesas,qspi-r8a77470 # RZ/G1C + - renesas,qspi-r8a7790 # R-Car H2 + - renesas,qspi-r8a7791 # R-Car M2-W + - renesas,qspi-r8a7792 # R-Car V2H + - renesas,qspi-r8a7793 # R-Car M2-N + - renesas,qspi-r8a7794 # R-Car E2 + - const: renesas,qspi # R-Car Gen2 and RZ/G1 + + reg: + maxItems: 1 + + interrupts: + oneOf: + - items: + - description: A combined interrupt + - items: + - description: Error interrupt (SPEI) + - description: Receive Interrupt (SPRI) + - description: Transmit Interrupt (SPTI) + + interrupt-names: + oneOf: + - items: + - const: mux + - items: + - const: error + - const: rx + - const: tx + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + + num-cs: + description: | + Total number of native chip selects. + Hardware limitations related to chip selects: + - When using GPIO chip selects, at least one native chip select must + be left unused, as it will be driven anyway. + minimum: 1 + maximum: 2 + default: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - '#address-cells' + - '#size-cells' + +allOf: + - $ref: spi-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - renesas,rspi-rz + then: + properties: + interrupts: + minItems: 3 + required: + - interrupt-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,qspi + then: + required: + - resets + +examples: + - | + #include + #include + #include + + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7791", "renesas,qspi"; + reg = <0xe6b10000 0x2c>; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 917>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt deleted file mode 100644 index 421722b93992..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-rspi.txt +++ /dev/null @@ -1,73 +0,0 @@ -Device tree configuration for Renesas RSPI/QSPI driver - -Required properties: -- compatible : For Renesas Serial Peripheral Interface on legacy SH: - "renesas,rspi-", "renesas,rspi" as fallback. - For Renesas Serial Peripheral Interface on RZ/A: - "renesas,rspi-", "renesas,rspi-rz" as fallback. - For Quad Serial Peripheral Interface on R-Car Gen2 and - RZ/G1 devices: - "renesas,qspi-", "renesas,qspi" as fallback. - Examples with soctypes are: - - "renesas,rspi-sh7757" (SH) - - "renesas,rspi-r7s72100" (RZ/A1H) - - "renesas,rspi-r7s9210" (RZ/A2) - - "renesas,qspi-r8a7743" (RZ/G1M) - - "renesas,qspi-r8a7744" (RZ/G1N) - - "renesas,qspi-r8a7745" (RZ/G1E) - - "renesas,qspi-r8a77470" (RZ/G1C) - - "renesas,qspi-r8a7790" (R-Car H2) - - "renesas,qspi-r8a7791" (R-Car M2-W) - - "renesas,qspi-r8a7792" (R-Car V2H) - - "renesas,qspi-r8a7793" (R-Car M2-N) - - "renesas,qspi-r8a7794" (R-Car E2) -- reg : Address start and address range size of the device -- interrupts : A list of interrupt-specifiers, one for each entry in - interrupt-names. - If interrupt-names is not present, an interrupt specifier - for a single muxed interrupt. -- interrupt-names : A list of interrupt names. Should contain (if present): - - "error" for SPEI, - - "rx" for SPRI, - - "tx" to SPTI, - - "mux" for a single muxed interrupt. -- num-cs : Number of chip selects. Some RSPI cores have more than 1. -- #address-cells : Must be <1> -- #size-cells : Must be <0> - -Optional properties: -- clocks : Must contain a reference to the functional clock. -- dmas : Must contain a list of two references to DMA specifiers, - one for transmission, and one for reception. -- dma-names : Must contain a list of two DMA names, "tx" and "rx". - -Pinctrl properties might be needed, too. See -Documentation/devicetree/bindings/pinctrl/renesas,*. - -Examples: - - spi0: spi@e800c800 { - compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; - reg = <0xe800c800 0x24>; - interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>, - <0 239 IRQ_TYPE_LEVEL_HIGH>, - <0 240 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", "rx", "tx"; - interrupt-parent = <&gic>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi: spi@e6b10000 { - compatible = "renesas,qspi-r8a7791", "renesas,qspi"; - reg = <0 0xe6b10000 0 0x2c>; - interrupt-parent = <&gic>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>; - dma-names = "tx", "rx"; - };