diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index b17121881235..37d7374896f6 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -323,9 +323,6 @@ struct via686a_data {
 
 static struct pci_dev *s_bridge;	/* pointer to the (only) via686a */
 
-static int via686a_probe(struct platform_device *pdev);
-static int via686a_remove(struct platform_device *pdev);
-
 static inline int via686a_read_value(struct via686a_data *data, u8 reg)
 {
 	return inb_p(data->addr + reg);
@@ -337,8 +334,76 @@ static inline void via686a_write_value(struct via686a_data *data, u8 reg,
 	outb_p(value, data->addr + reg);
 }
 
-static struct via686a_data *via686a_update_device(struct device *dev);
-static void via686a_init_device(struct via686a_data *data);
+static void via686a_update_fan_div(struct via686a_data *data)
+{
+	int reg = via686a_read_value(data, VIA686A_REG_FANDIV);
+	data->fan_div[0] = (reg >> 4) & 0x03;
+	data->fan_div[1] = reg >> 6;
+}
+
+static struct via686a_data *via686a_update_device(struct device *dev)
+{
+	struct via686a_data *data = dev_get_drvdata(dev);
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		for (i = 0; i <= 4; i++) {
+			data->in[i] =
+			    via686a_read_value(data, VIA686A_REG_IN(i));
+			data->in_min[i] = via686a_read_value(data,
+							     VIA686A_REG_IN_MIN
+							     (i));
+			data->in_max[i] =
+			    via686a_read_value(data, VIA686A_REG_IN_MAX(i));
+		}
+		for (i = 1; i <= 2; i++) {
+			data->fan[i - 1] =
+			    via686a_read_value(data, VIA686A_REG_FAN(i));
+			data->fan_min[i - 1] = via686a_read_value(data,
+						     VIA686A_REG_FAN_MIN(i));
+		}
+		for (i = 0; i <= 2; i++) {
+			data->temp[i] = via686a_read_value(data,
+						 VIA686A_REG_TEMP[i]) << 2;
+			data->temp_over[i] =
+			    via686a_read_value(data,
+					       VIA686A_REG_TEMP_OVER[i]);
+			data->temp_hyst[i] =
+			    via686a_read_value(data,
+					       VIA686A_REG_TEMP_HYST[i]);
+		}
+		/*
+		 * add in lower 2 bits
+		 * temp1 uses bits 7-6 of VIA686A_REG_TEMP_LOW1
+		 * temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23
+		 * temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23
+		 */
+		data->temp[0] |= (via686a_read_value(data,
+						     VIA686A_REG_TEMP_LOW1)
+				  & 0xc0) >> 6;
+		data->temp[1] |=
+		    (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
+		     0x30) >> 4;
+		data->temp[2] |=
+		    (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
+		     0xc0) >> 6;
+
+		via686a_update_fan_div(data);
+		data->alarms =
+		    via686a_read_value(data,
+				       VIA686A_REG_ALARM1) |
+		    (via686a_read_value(data, VIA686A_REG_ALARM2) << 8);
+		data->last_updated = jiffies;
+		data->valid = true;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
 
 /* following are the sysfs callback functions */
 
@@ -656,13 +721,23 @@ static const struct attribute_group via686a_group = {
 	.attrs = via686a_attributes,
 };
 
-static struct platform_driver via686a_driver = {
-	.driver = {
-		.name	= DRIVER_NAME,
-	},
-	.probe		= via686a_probe,
-	.remove		= via686a_remove,
-};
+static void via686a_init_device(struct via686a_data *data)
+{
+	u8 reg;
+
+	/* Start monitoring */
+	reg = via686a_read_value(data, VIA686A_REG_CONFIG);
+	via686a_write_value(data, VIA686A_REG_CONFIG, (reg | 0x01) & 0x7F);
+
+	/* Configure temp interrupt mode for continuous-interrupt operation */
+	reg = via686a_read_value(data, VIA686A_REG_TEMP_MODE);
+	via686a_write_value(data, VIA686A_REG_TEMP_MODE,
+			    (reg & ~VIA686A_TEMP_MODE_MASK)
+			    | VIA686A_TEMP_MODE_CONTINUOUS);
+
+	/* Pre-read fan clock divisor values */
+	via686a_update_fan_div(data);
+}
 
 /* This is called when the module is loaded */
 static int via686a_probe(struct platform_device *pdev)
@@ -721,94 +796,13 @@ static int via686a_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static void via686a_update_fan_div(struct via686a_data *data)
-{
-	int reg = via686a_read_value(data, VIA686A_REG_FANDIV);
-	data->fan_div[0] = (reg >> 4) & 0x03;
-	data->fan_div[1] = reg >> 6;
-}
-
-static void via686a_init_device(struct via686a_data *data)
-{
-	u8 reg;
-
-	/* Start monitoring */
-	reg = via686a_read_value(data, VIA686A_REG_CONFIG);
-	via686a_write_value(data, VIA686A_REG_CONFIG, (reg | 0x01) & 0x7F);
-
-	/* Configure temp interrupt mode for continuous-interrupt operation */
-	reg = via686a_read_value(data, VIA686A_REG_TEMP_MODE);
-	via686a_write_value(data, VIA686A_REG_TEMP_MODE,
-			    (reg & ~VIA686A_TEMP_MODE_MASK)
-			    | VIA686A_TEMP_MODE_CONTINUOUS);
-
-	/* Pre-read fan clock divisor values */
-	via686a_update_fan_div(data);
-}
-
-static struct via686a_data *via686a_update_device(struct device *dev)
-{
-	struct via686a_data *data = dev_get_drvdata(dev);
-	int i;
-
-	mutex_lock(&data->update_lock);
-
-	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
-	    || !data->valid) {
-		for (i = 0; i <= 4; i++) {
-			data->in[i] =
-			    via686a_read_value(data, VIA686A_REG_IN(i));
-			data->in_min[i] = via686a_read_value(data,
-							     VIA686A_REG_IN_MIN
-							     (i));
-			data->in_max[i] =
-			    via686a_read_value(data, VIA686A_REG_IN_MAX(i));
-		}
-		for (i = 1; i <= 2; i++) {
-			data->fan[i - 1] =
-			    via686a_read_value(data, VIA686A_REG_FAN(i));
-			data->fan_min[i - 1] = via686a_read_value(data,
-						     VIA686A_REG_FAN_MIN(i));
-		}
-		for (i = 0; i <= 2; i++) {
-			data->temp[i] = via686a_read_value(data,
-						 VIA686A_REG_TEMP[i]) << 2;
-			data->temp_over[i] =
-			    via686a_read_value(data,
-					       VIA686A_REG_TEMP_OVER[i]);
-			data->temp_hyst[i] =
-			    via686a_read_value(data,
-					       VIA686A_REG_TEMP_HYST[i]);
-		}
-		/*
-		 * add in lower 2 bits
-		 * temp1 uses bits 7-6 of VIA686A_REG_TEMP_LOW1
-		 * temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23
-		 * temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23
-		 */
-		data->temp[0] |= (via686a_read_value(data,
-						     VIA686A_REG_TEMP_LOW1)
-				  & 0xc0) >> 6;
-		data->temp[1] |=
-		    (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
-		     0x30) >> 4;
-		data->temp[2] |=
-		    (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
-		     0xc0) >> 6;
-
-		via686a_update_fan_div(data);
-		data->alarms =
-		    via686a_read_value(data,
-				       VIA686A_REG_ALARM1) |
-		    (via686a_read_value(data, VIA686A_REG_ALARM2) << 8);
-		data->last_updated = jiffies;
-		data->valid = true;
-	}
-
-	mutex_unlock(&data->update_lock);
-
-	return data;
-}
+static struct platform_driver via686a_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+	},
+	.probe		= via686a_probe,
+	.remove		= via686a_remove,
+};
 
 static const struct pci_device_id via686a_pci_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4) },