korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-15 16:24:13 +08:00
Code Issues Packages Projects Releases Wiki Activity

drm: merge in Linus mainline

Browse Source
This commit is contained in:
Dave Airlie 2006-01-03 18:18:01 +11:00 committed by Dave Airlie
commit 97f2aab669
2195 changed files with 59437 additions and 62808 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
CREDITS
View File

@ -611,8 +611,7 @@ S: USA
N: Randolph Chung
E: tausq@debian.org
D: Linux/PA-RISC hacker
S: Los Altos, CA 94022
S: USA
S: Hong Kong
N: Juan Jose Ciarlante
W: http://juanjox.kernelnotes.org/
@ -1097,7 +1096,7 @@ S: 80050-430 - Curitiba - Paran
S: Brazil
N: Kumar Gala
E: kumar.gala@freescale.com
E: galak@kernel.crashing.org
D: Embedded PowerPC 6xx/7xx/74xx/82xx/83xx/85xx support
S: Austin, Texas 78729
S: USA
@ -3405,6 +3404,15 @@ S: Chudenicka 8
S: 10200 Prague 10, Hostivar
S: Czech Republic
N: Thibaut Varene
E: T-Bone@parisc-linux.org
W: http://www.parisc-linux.org/
P: 1024D/B7D2F063 E67C 0D43 A75E 12A5 BB1C FA2F 1E32 C3DA B7D2 F063
D: PA-RISC port minion, PDC and GSCPS2 drivers, debuglocks and other bits
D: Some bits in an ARM port, S1D13XXX FB driver, random patches here and there
D: AD1889 sound driver
S: Paris, France
N: Heikki Vatiainen
E: hessu@cs.tut.fi
D: Co-author of Multi-Protocol Over ATM (MPOA), some LANE hacks

6
Documentation/00-INDEX
View File

@ -24,6 +24,8 @@ DMA-mapping.txt
- info for PCI drivers using DMA portably across all platforms.
DocBook/
- directory with DocBook templates etc. for kernel documentation.
HOWTO
- The process and procedures of how to do Linux kernel development.
IO-mapping.txt
- how to access I/O mapped memory from within device drivers.
IPMI.txt
@ -256,6 +258,10 @@ specialix.txt
- info on hardware/driver for specialix IO8+ multiport serial card.
spinlocks.txt
- info on using spinlocks to provide exclusive access in kernel.
stable_api_nonsense.txt
- info on why the kernel does not have a stable in-kernel api or abi.
stable_kernel_rules.txt
- rules and procedures for the -stable kernel releases.
stallion.txt
- info on using the Stallion multiport serial driver.
svga.txt

48
Documentation/DocBook/Makefile
View File

@ -20,6 +20,12 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
# +--> DIR=file (htmldocs)
# +--> man/ (mandocs)
# for PDF and PS output you can choose between xmlto and docbook-utils tools
PDF_METHOD = $(prefer-db2x)
PS_METHOD = $(prefer-db2x)
###
# The targets that may be used.
.PHONY: xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
@ -93,27 +99,39 @@ C-procfs-example = procfs_example.xml
C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example))
$(obj)/procfs-guide.xml: $(C-procfs-example2)
###
# Rules to generate postscript, PDF and HTML
# db2html creates a directory. Generate a html file used for timestamp
notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \
exit 1
db2xtemplate = db2TYPE -o $(dir $@) $<
xmltotemplate = xmlto TYPE $(XMLTOFLAGS) -o $(dir $@) $<
quiet_cmd_db2ps = XMLTO $@
cmd_db2ps = xmlto ps $(XMLTOFLAGS) -o $(dir $@) $<
# determine which methods are available
ifeq ($(shell which db2ps >/dev/null 2>&1 && echo found),found)
use-db2x = db2x
prefer-db2x = db2x
else
use-db2x = notfound
prefer-db2x = $(use-xmlto)
endif
ifeq ($(shell which xmlto >/dev/null 2>&1 && echo found),found)
use-xmlto = xmlto
prefer-xmlto = xmlto
else
use-xmlto = notfound
prefer-xmlto = $(use-db2x)
endif
# the commands, generated from the chosen template
quiet_cmd_db2ps = PS $@
cmd_db2ps = $(subst TYPE,ps, $($(PS_METHOD)template))
%.ps : %.xml
@(which xmlto > /dev/null 2>&1) || \
(echo "*** You need to install xmlto ***"; \
exit 1)
$(call cmd,db2ps)
quiet_cmd_db2pdf = XMLTO $@
cmd_db2pdf = xmlto pdf $(XMLTOFLAGS) -o $(dir $@) $<
quiet_cmd_db2pdf = PDF $@
cmd_db2pdf = $(subst TYPE,pdf, $($(PDF_METHOD)template))
%.pdf : %.xml
@(which xmlto > /dev/null 2>&1) || \
(echo "*** You need to install xmlto ***"; \
exit 1)
$(call cmd,db2pdf)
quiet_cmd_db2html = XMLTO $@
quiet_cmd_db2html = HTML $@
cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
Goto $(patsubst %.html,%,$(notdir $@))</a><p>' > $@
@ -127,7 +145,7 @@ quiet_cmd_db2html = XMLTO $@
@if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \
cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
quiet_cmd_db2man = XMLTO $@
quiet_cmd_db2man = MAN $@
cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi
%.9 : %.xml
@(which xmlto > /dev/null 2>&1) || \

12
Documentation/DocBook/kernel-api.tmpl
View File

@ -68,9 +68,7 @@ X!Iinclude/linux/kobject.h
<sect1><title>Kernel utility functions</title>
!Iinclude/linux/kernel.h
<!-- This needs to clean up to make kernel-doc happy
X!Ekernel/printk.c
-->
!Ekernel/printk.c
!Ekernel/panic.c
!Ekernel/sys.c
!Ekernel/rcupdate.c
@ -239,8 +237,10 @@ X!Ilib/string.c
<sect1><title>Driver Support</title>
!Enet/core/dev.c
!Enet/ethernet/eth.c
!Einclude/linux/etherdevice.h
!Enet/core/wireless.c
!Iinclude/linux/etherdevice.h
<!-- FIXME: Removed for now since no structured comments in source
X!Enet/core/wireless.c
-->
</sect1>
<sect1><title>Synchronous PPP</title>
!Edrivers/net/wan/syncppp.c
@ -388,7 +388,7 @@ X!Edrivers/pnp/system.c
<chapter id="blkdev">
<title>Block Devices</title>
!Edrivers/block/ll_rw_blk.c
!Eblock/ll_rw_blk.c
</chapter>
<chapter id="miscdev">

1
Documentation/DocBook/stylesheet.xsl
View File

@ -3,4 +3,5 @@
<param name="chunk.quietly">1</param>
<param name="funcsynopsis.style">ansi</param>
<param name="funcsynopsis.tabular.threshold">80</param>
<!-- <param name="paper.type">A4</param> -->
</stylesheet>

618
Documentation/HOWTO Normal file
View File

@ -0,0 +1,618 @@
HOWTO do Linux kernel development
---------------------------------
This is the be-all, end-all document on this topic. It contains
instructions on how to become a Linux kernel developer and how to learn
to work with the Linux kernel development community. It tries to not
contain anything related to the technical aspects of kernel programming,
but will help point you in the right direction for that.
If anything in this document becomes out of date, please send in patches
to the maintainer of this file, who is listed at the bottom of the
document.
Introduction
------------
So, you want to learn how to become a Linux kernel developer? Or you
have been told by your manager, "Go write a Linux driver for this
device." This document's goal is to teach you everything you need to
know to achieve this by describing the process you need to go through,
and hints on how to work with the community. It will also try to
explain some of the reasons why the community works like it does.
The kernel is written mostly in C, with some architecture-dependent
parts written in assembly. A good understanding of C is required for
kernel development. Assembly (any architecture) is not required unless
you plan to do low-level development for that architecture. Though they
are not a good substitute for a solid C education and/or years of
experience, the following books are good for, if anything, reference:
- "The C Programming Language" by Kernighan and Ritchie [Prentice Hall]
- "Practical C Programming" by Steve Oualline [O'Reilly]
The kernel is written using GNU C and the GNU toolchain. While it
adheres to the ISO C89 standard, it uses a number of extensions that are
not featured in the standard. The kernel is a freestanding C
environment, with no reliance on the standard C library, so some
portions of the C standard are not supported. Arbitrary long long
divisions and floating point are not allowed. It can sometimes be
difficult to understand the assumptions the kernel has on the toolchain
and the extensions that it uses, and unfortunately there is no
definitive reference for them. Please check the gcc info pages (`info
gcc`) for some information on them.
Please remember that you are trying to learn how to work with the
existing development community. It is a diverse group of people, with
high standards for coding, style and procedure. These standards have
been created over time based on what they have found to work best for
such a large and geographically dispersed team. Try to learn as much as
possible about these standards ahead of time, as they are well
documented; do not expect people to adapt to you or your company's way
of doing things.
Legal Issues
------------
The Linux kernel source code is released under the GPL. Please see the
file, COPYING, in the main directory of the source tree, for details on
the license. If you have further questions about the license, please
contact a lawyer, and do not ask on the Linux kernel mailing list. The
people on the mailing lists are not lawyers, and you should not rely on
their statements on legal matters.
For common questions and answers about the GPL, please see:
http://www.gnu.org/licenses/gpl-faq.html
Documentation
------------
The Linux kernel source tree has a large range of documents that are
invaluable for learning how to interact with the kernel community. When
new features are added to the kernel, it is recommended that new
documentation files are also added which explain how to use the feature.
When a kernel change causes the interface that the kernel exposes to
userspace to change, it is recommended that you send the information or
a patch to the manual pages explaining the change to the manual pages
maintainer at mtk-manpages@gmx.net.
Here is a list of files that are in the kernel source tree that are
required reading:
README
This file gives a short background on the Linux kernel and describes
what is necessary to do to configure and build the kernel. People
who are new to the kernel should start here.
Documentation/Changes
This file gives a list of the minimum levels of various software
packages that are necessary to build and run the kernel
successfully.
Documentation/CodingStyle
This describes the Linux kernel coding style, and some of the
rationale behind it. All new code is expected to follow the
guidelines in this document. Most maintainers will only accept
patches if these rules are followed, and many people will only
review code if it is in the proper style.
Documentation/SubmittingPatches
Documentation/SubmittingDrivers
These files describe in explicit detail how to successfully create
and send a patch, including (but not limited to):
- Email contents
- Email format
- Who to send it to
Following these rules will not guarantee success (as all patches are
subject to scrutiny for content and style), but not following them
will almost always prevent it.
Other excellent descriptions of how to create patches properly are:
"The Perfect Patch"
http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
"Linux kernel patch submission format"
http://linux.yyz.us/patch-format.html
Documentation/stable_api_nonsense.txt
This file describes the rationale behind the conscious decision to
not have a stable API within the kernel, including things like:
- Subsystem shim-layers (for compatibility?)
- Driver portability between Operating Systems.
- Mitigating rapid change within the kernel source tree (or
preventing rapid change)
This document is crucial for understanding the Linux development
philosophy and is very important for people moving to Linux from
development on other Operating Systems.
Documentation/SecurityBugs
If you feel you have found a security problem in the Linux kernel,
please follow the steps in this document to help notify the kernel
developers, and help solve the issue.
Documentation/ManagementStyle
This document describes how Linux kernel maintainers operate and the
shared ethos behind their methodologies. This is important reading
for anyone new to kernel development (or anyone simply curious about
it), as it resolves a lot of common misconceptions and confusion
about the unique behavior of kernel maintainers.
Documentation/stable_kernel_rules.txt
This file describes the rules on how the stable kernel releases
happen, and what to do if you want to get a change into one of these
releases.
Documentation/kernel-docs.txt
A list of external documentation that pertains to kernel
development. Please consult this list if you do not find what you
are looking for within the in-kernel documentation.
Documentation/applying-patches.txt
A good introduction describing exactly what a patch is and how to
apply it to the different development branches of the kernel.
The kernel also has a large number of documents that can be
automatically generated from the source code itself. This includes a
full description of the in-kernel API, and rules on how to handle
locking properly. The documents will be created in the
Documentation/DocBook/ directory and can be generated as PDF,
Postscript, HTML, and man pages by running:
make pdfdocs
make psdocs
make htmldocs
make mandocs
respectively from the main kernel source directory.
Becoming A Kernel Developer
---------------------------
If you do not know anything about Linux kernel development, you should
look at the Linux KernelNewbies project:
http://kernelnewbies.org
It consists of a helpful mailing list where you can ask almost any type
of basic kernel development question (make sure to search the archives
first, before asking something that has already been answered in the
past.) It also has an IRC channel that you can use to ask questions in
real-time, and a lot of helpful documentation that is useful for
learning about Linux kernel development.
The website has basic information about code organization, subsystems,
and current projects (both in-tree and out-of-tree). It also describes
some basic logistical information, like how to compile a kernel and
apply a patch.
If you do not know where you want to start, but you want to look for
some task to start doing to join into the kernel development community,
go to the Linux Kernel Janitor's project:
http://janitor.kernelnewbies.org/
It is a great place to start. It describes a list of relatively simple
problems that need to be cleaned up and fixed within the Linux kernel
source tree. Working with the developers in charge of this project, you
will learn the basics of getting your patch into the Linux kernel tree,
and possibly be pointed in the direction of what to go work on next, if
you do not already have an idea.
If you already have a chunk of code that you want to put into the kernel
tree, but need some help getting it in the proper form, the
kernel-mentors project was created to help you out with this. It is a
mailing list, and can be found at:
http://selenic.com/mailman/listinfo/kernel-mentors
Before making any actual modifications to the Linux kernel code, it is
imperative to understand how the code in question works. For this
purpose, nothing is better than reading through it directly (most tricky
bits are commented well), perhaps even with the help of specialized
tools. One such tool that is particularly recommended is the Linux
Cross-Reference project, which is able to present source code in a
self-referential, indexed webpage format. An excellent up-to-date
repository of the kernel code may be found at:
http://sosdg.org/~coywolf/lxr/
The development process
-----------------------
Linux kernel development process currently consists of a few different
main kernel "branches" and lots of different subsystem-specific kernel
branches. These different branches are:
- main 2.6.x kernel tree
- 2.6.x.y -stable kernel tree
- 2.6.x -git kernel patches
- 2.6.x -mm kernel patches
- subsystem specific kernel trees and patches
2.6.x kernel tree
-----------------
2.6.x kernels are maintained by Linus Torvalds, and can be found on
kernel.org in the pub/linux/kernel/v2.6/ directory. Its development
process is as follows:
- As soon as a new kernel is released a two weeks window is open,
during this period of time maintainers can submit big diffs to
Linus, usually the patches that have already been included in the
-mm kernel for a few weeks. The preferred way to submit big changes
is using git (the kernel's source management tool, more information
can be found at http://git.or.cz/) but plain patches are also just
fine.
- After two weeks a -rc1 kernel is released it is now possible to push
only patches that do not include new features that could affect the
stability of the whole kernel. Please note that a whole new driver
(or filesystem) might be accepted after -rc1 because there is no
risk of causing regressions with such a change as long as the change
is self-contained and does not affect areas outside of the code that
is being added. git can be used to send patches to Linus after -rc1
is released, but the patches need to also be sent to a public
mailing list for review.
- A new -rc is released whenever Linus deems the current git tree to
be in a reasonably sane state adequate for testing. The goal is to
release a new -rc kernel every week.
- Process continues until the kernel is considered "ready", the
process should last around 6 weeks.
It is worth mentioning what Andrew Morton wrote on the linux-kernel
mailing list about kernel releases:
"Nobody knows when a kernel will be released, because it's
released according to perceived bug status, not according to a
preconceived timeline."
2.6.x.y -stable kernel tree
---------------------------
Kernels with 4 digit versions are -stable kernels. They contain
relatively small and critical fixes for security problems or significant
regressions discovered in a given 2.6.x kernel.
This is the recommended branch for users who want the most recent stable
kernel and are not interested in helping test development/experimental
versions.
If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
kernel is the current stable kernel.
2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are
released almost every other week.
The file Documentation/stable_kernel_rules.txt in the kernel tree
documents what kinds of changes are acceptable for the -stable tree, and
how the release process works.
2.6.x -git patches
------------------
These are daily snapshots of Linus' kernel tree which are managed in a
git repository (hence the name.) These patches are usually released
daily and represent the current state of Linus' tree. They are more
experimental than -rc kernels since they are generated automatically
without even a cursory glance to see if they are sane.
2.6.x -mm kernel patches
------------------------
These are experimental kernel patches released by Andrew Morton. Andrew
takes all of the different subsystem kernel trees and patches and mushes
them together, along with a lot of patches that have been plucked from
the linux-kernel mailing list. This tree serves as a proving ground for
new features and patches. Once a patch has proved its worth in -mm for
a while Andrew or the subsystem maintainer pushes it on to Linus for
inclusion in mainline.
It is heavily encouraged that all new patches get tested in the -mm tree
before they are sent to Linus for inclusion in the main kernel tree.
These kernels are not appropriate for use on systems that are supposed
to be stable and they are more risky to run than any of the other
branches.
If you wish to help out with the kernel development process, please test
and use these kernel releases and provide feedback to the linux-kernel
mailing list if you have any problems, and if everything works properly.
In addition to all the other experimental patches, these kernels usually
also contain any changes in the mainline -git kernels available at the
time of release.
The -mm kernels are not released on a fixed schedule, but usually a few
-mm kernels are released in between each -rc kernel (1 to 3 is common).
Subsystem Specific kernel trees and patches
-------------------------------------------
A number of the different kernel subsystem developers expose their
development trees so that others can see what is happening in the
different areas of the kernel. These trees are pulled into the -mm
kernel releases as described above.
Here is a list of some of the different kernel trees available:
git trees:
- Kbuild development tree, Sam Ravnborg <sam@ravnborg.org>
kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
- ACPI development tree, Len Brown <len.brown@intel.com>
kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
- Block development tree, Jens Axboe <axboe@suse.de>
kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
- DRM development tree, Dave Airlie <airlied@linux.ie>
kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
- ia64 development tree, Tony Luck <tony.luck@intel.com>
kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
- ieee1394 development tree, Jody McIntyre <scjody@modernduck.com>
kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
- infiniband, Roland Dreier <rolandd@cisco.com>
kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
- libata, Jeff Garzik <jgarzik@pobox.com>
kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
- network drivers, Jeff Garzik <jgarzik@pobox.com>
kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
- pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
- SCSI, James Bottomley <James.Bottomley@SteelEye.com>
kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
Other git kernel trees can be found listed at http://kernel.org/git
quilt trees:
- USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de>
kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
Bug Reporting
-------------
bugzilla.kernel.org is where the Linux kernel developers track kernel
bugs. Users are encouraged to report all bugs that they find in this
tool. For details on how to use the kernel bugzilla, please see:
http://test.kernel.org/bugzilla/faq.html
The file REPORTING-BUGS in the main kernel source directory has a good
template for how to report a possible kernel bug, and details what kind
of information is needed by the kernel developers to help track down the
problem.
Mailing lists
-------------
As some of the above documents describe, the majority of the core kernel
developers participate on the Linux Kernel Mailing list. Details on how
to subscribe and unsubscribe from the list can be found at:
http://vger.kernel.org/vger-lists.html#linux-kernel
There are archives of the mailing list on the web in many different
places. Use a search engine to find these archives. For example:
http://dir.gmane.org/gmane.linux.kernel
It is highly recommended that you search the archives about the topic
you want to bring up, before you post it to the list. A lot of things
already discussed in detail are only recorded at the mailing list
archives.
Most of the individual kernel subsystems also have their own separate
mailing list where they do their development efforts. See the
MAINTAINERS file for a list of what these lists are for the different
groups.
Many of the lists are hosted on kernel.org. Information on them can be
found at:
http://vger.kernel.org/vger-lists.html
Please remember to follow good behavioral habits when using the lists.
Though a bit cheesy, the following URL has some simple guidelines for
interacting with the list (or any list):
http://www.albion.com/netiquette/
If multiple people respond to your mail, the CC: list of recipients may
get pretty large. Don't remove anybody from the CC: list without a good
reason, or don't reply only to the list address. Get used to receiving the
mail twice, one from the sender and the one from the list, and don't try
to tune that by adding fancy mail-headers, people will not like it.
Remember to keep the context and the attribution of your replies intact,
keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and
add your statements between the individual quoted sections instead of
writing at the top of the mail.
If you add patches to your mail, make sure they are plain readable text
as stated in Documentation/SubmittingPatches. Kernel developers don't
want to deal with attachments or compressed patches; they may want
to comment on individual lines of your patch, which works only that way.
Make sure you use a mail program that does not mangle spaces and tab
characters. A good first test is to send the mail to yourself and try
to apply your own patch by yourself. If that doesn't work, get your
mail program fixed or change it until it works.
Above all, please remember to show respect to other subscribers.
Working with the community
--------------------------
The goal of the kernel community is to provide the best possible kernel
there is. When you submit a patch for acceptance, it will be reviewed
on its technical merits and those alone. So, what should you be
expecting?
- criticism
- comments
- requests for change
- requests for justification
- silence
Remember, this is part of getting your patch into the kernel. You have
to be able to take criticism and comments about your patches, evaluate
them at a technical level and either rework your patches or provide
clear and concise reasoning as to why those changes should not be made.
If there are no responses to your posting, wait a few days and try
again, sometimes things get lost in the huge volume.
What should you not do?
- expect your patch to be accepted without question
- become defensive
- ignore comments
- resubmit the patch without making any of the requested changes
In a community that is looking for the best technical solution possible,
there will always be differing opinions on how beneficial a patch is.
You have to be cooperative, and willing to adapt your idea to fit within
the kernel. Or at least be willing to prove your idea is worth it.
Remember, being wrong is acceptable as long as you are willing to work
toward a solution that is right.
It is normal that the answers to your first patch might simply be a list
of a dozen things you should correct. This does _not_ imply that your
patch will not be accepted, and it is _not_ meant against you
personally. Simply correct all issues raised against your patch and
resend it.
Differences between the kernel community and corporate structures
-----------------------------------------------------------------
The kernel community works differently than most traditional corporate
development environments. Here are a list of things that you can try to
do to try to avoid problems:
Good things to say regarding your proposed changes:
- "This solves multiple problems."
- "This deletes 2000 lines of code."
- "Here is a patch that explains what I am trying to describe."
- "I tested it on 5 different architectures..."
- "Here is a series of small patches that..."
- "This increases performance on typical machines..."
Bad things you should avoid saying:
- "We did it this way in AIX/ptx/Solaris, so therefore it must be
good..."
- "I've being doing this for 20 years, so..."
- "This is required for my company to make money"
- "This is for our Enterprise product line."
- "Here is my 1000 page design document that describes my idea"
- "I've been working on this for 6 months..."
- "Here's a 5000 line patch that..."
- "I rewrote all of the current mess, and here it is..."
- "I have a deadline, and this patch needs to be applied now."
Another way the kernel community is different than most traditional
software engineering work environments is the faceless nature of
interaction. One benefit of using email and irc as the primary forms of
communication is the lack of discrimination based on gender or race.
The Linux kernel work environment is accepting of women and minorities
because all you are is an email address. The international aspect also
helps to level the playing field because you can't guess gender based on
a person's name. A man may be named Andrea and a woman may be named Pat.
Most women who have worked in the Linux kernel and have expressed an
opinion have had positive experiences.
The language barrier can cause problems for some people who are not
comfortable with English. A good grasp of the language can be needed in
order to get ideas across properly on mailing lists, so it is
recommended that you check your emails to make sure they make sense in
English before sending them.
Break up your changes
---------------------
The Linux kernel community does not gladly accept large chunks of code
dropped on it all at once. The changes need to be properly introduced,
discussed, and broken up into tiny, individual portions. This is almost
the exact opposite of what companies are used to doing. Your proposal
should also be introduced very early in the development process, so that
you can receive feedback on what you are doing. It also lets the
community feel that you are working with them, and not simply using them
as a dumping ground for your feature. However, don't send 50 emails at
one time to a mailing list, your patch series should be smaller than
that almost all of the time.
The reasons for breaking things up are the following:
1) Small patches increase the likelihood that your patches will be
applied, since they don't take much time or effort to verify for
correctness. A 5 line patch can be applied by a maintainer with
barely a second glance. However, a 500 line patch may take hours to
review for correctness (the time it takes is exponentially
proportional to the size of the patch, or something).
Small patches also make it very easy to debug when something goes
wrong. It's much easier to back out patches one by one than it is
to dissect a very large patch after it's been applied (and broken
something).
2) It's important not only to send small patches, but also to rewrite
and simplify (or simply re-order) patches before submitting them.
Here is an analogy from kernel developer Al Viro:
"Think of a teacher grading homework from a math student. The
teacher does not want to see the student's trials and errors
before they came up with the solution. They want to see the
cleanest, most elegant answer. A good student knows this, and
would never submit her intermediate work before the final
solution."
The same is true of kernel development. The maintainers and
reviewers do not want to see the thought process behind the
solution to the problem one is solving. They want to see a
simple and elegant solution."
It may be challenging to keep the balance between presenting an elegant
solution and working together with the community and discussing your
unfinished work. Therefore it is good to get early in the process to
get feedback to improve your work, but also keep your changes in small
chunks that they may get already accepted, even when your whole task is
not ready for inclusion now.
Also realize that it is not acceptable to send patches for inclusion
that are unfinished and will be "fixed up later."
Justify your change
-------------------
Along with breaking up your patches, it is very important for you to let
the Linux community know why they should add this change. New features
must be justified as being needed and useful.
Document your change
--------------------
When sending in your patches, pay special attention to what you say in
the text in your email. This information will become the ChangeLog
information for the patch, and will be preserved for everyone to see for
all time. It should describe the patch completely, containing:
- why the change is necessary
- the overall design approach in the patch
- implementation details
- testing results
For more details on what this should all look like, please see the
ChangeLog section of the document:
"The Perfect Patch"
http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
All of these things are sometimes very hard to do. It can take years to
perfect these practices (if at all). It's a continuous process of
improvement that requires a lot of patience and determination. But
don't give up, it's possible. Many have done it before, and each had to
start exactly where you are now.
----------
Thanks to Paolo Ciarrocchi who allowed the "Development Process" section
to be based on text he had written, and to Randy Dunlap and Gerrit
Huizenga for some of the list of things you should and should not say.
Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi
Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop,
David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard for
their review, comments, and contributions. Without their help, this
document would not have been possible.
Maintainer: Greg Kroah-Hartman <greg@kroah.com>

2
Documentation/arm/00-INDEX
View File

@ -16,5 +16,7 @@ empeg
- Empeg documentation
mem_alignment
- alignment abort handler documentation
memory.txt
- description of the virtual memory layout
nwfpe
- NWFPE floating point emulator documentation

2
Documentation/arm/VFP/release-notes.txt
View File

@ -12,7 +12,7 @@ This release has been validated against the SoftFloat-2b library by
John R. Hauser using the TestFloat-2a test suite. Details of this
library and test suite can be found at:
http://www.cs.berkeley.edu/~jhauser/arithmetic/SoftFloat.html
http://www.jhauser.us/arithmetic/SoftFloat.html
The operations which have been tested with this package are:

4
Documentation/arm/memory.txt
View File

@ -1,7 +1,7 @@
Kernel Memory Layout on ARM Linux
Russell King <rmk@arm.linux.org.uk>
May 21, 2004 (2.6.6)
November 17, 2005 (2.6.15)
This document describes the virtual memory layout which the Linux
kernel uses for ARM processors. It indicates which regions are
@ -37,6 +37,8 @@ ff000000 ffbfffff Reserved for future expansion of DMA
mapping region.
VMALLOC_END feffffff Free for platform use, recommended.
VMALLOC_END must be aligned to a 2MB
boundary.
VMALLOC_START VMALLOC_END-1 vmalloc() / ioremap() space.
Memory returned by vmalloc/ioremap will

27
Documentation/atomic_ops.txt
View File

@ -115,6 +115,33 @@ boolean is return which indicates whether the resulting counter value
is negative. It requires explicit memory barrier semantics around the
operation.
Then:
int atomic_cmpxchg(atomic_t *v, int old, int new);
This performs an atomic compare exchange operation on the atomic value v,
with the given old and new values. Like all atomic_xxx operations,
atomic_cmpxchg will only satisfy its atomicity semantics as long as all
other accesses of *v are performed through atomic_xxx operations.
atomic_cmpxchg requires explicit memory barriers around the operation.
The semantics for atomic_cmpxchg are the same as those defined for 'cas'
below.
Finally:
int atomic_add_unless(atomic_t *v, int a, int u);
If the atomic value v is not equal to u, this function adds a to v, and
returns non zero. If v is equal to u then it returns zero. This is done as
an atomic operation.
atomic_add_unless requires explicit memory barriers around the operation.
atomic_inc_not_zero, equivalent to atomic_add_unless(v, 1, 0)
If a caller requires memory barrier semantics around an atomic_t
operation which does not return a value, a set of interfaces are
defined which accomplish this:

4
Documentation/block/biodoc.txt
View File

@ -1063,8 +1063,8 @@ Aside:
4.4 I/O contexts
I/O contexts provide a dynamically allocated per process data area. They may
be used in I/O schedulers, and in the block layer (could be used for IO statis,
priorities for example). See *io_context in drivers/block/ll_rw_blk.c, and
as-iosched.c for an example of usage in an i/o scheduler.
priorities for example). See *io_context in block/ll_rw_blk.c, and as-iosched.c
for an example of usage in an i/o scheduler.
5. Scalability related changes

29
Documentation/cciss.txt
View File

@ -133,3 +133,32 @@ hardware and it is important to prevent the kernel from attempting to directly
access these devices too, as if the array controller were merely a SCSI
controller in the same way that we are allowing it to access SCSI tape drives.
SCSI error handling for tape drives and medium changers
-------------------------------------------------------
The linux SCSI mid layer provides an error handling protocol which
kicks into gear whenever a SCSI command fails to complete within a
certain amount of time (which can vary depending on the command).
The cciss driver participates in this protocol to some extent. The
normal protocol is a four step process. First the device is told
to abort the command. If that doesn't work, the device is reset.
If that doesn't work, the SCSI bus is reset. If that doesn't work
the host bus adapter is reset. Because the cciss driver is a block
driver as well as a SCSI driver and only the tape drives and medium
changers are presented to the SCSI mid layer, and unlike more
straightforward SCSI drivers, disk i/o continues through the block
side during the SCSI error recovery process, the cciss driver only
implements the first two of these actions, aborting the command, and
resetting the device. Additionally, most tape drives will not oblige
in aborting commands, and sometimes it appears they will not even
obey a reset coommand, though in most circumstances they will. In
the case that the command cannot be aborted and the device cannot be
reset, the device will be set offline.
In the event the error handling code is triggered and a tape drive is
successfully reset or the tardy command is successfully aborted, the
tape drive may still not allow i/o to continue until some command
is issued which positions the tape to a known position. Typically you
must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example)
before i/o can proceed again to a tape drive which was reset.

12
Documentation/devices.txt
View File

@ -2903,14 +2903,14 @@ Your cooperation is appreciated.
196 = /dev/dvb/adapter3/video0 first video decoder of fourth card
216 char USB BlueTooth devices
0 = /dev/ttyUB0 First USB BlueTooth device
1 = /dev/ttyUB1 Second USB BlueTooth device
216 char Bluetooth RFCOMM TTY devices
0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device
1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device
...
217 char USB BlueTooth devices (alternate devices)
0 = /dev/cuub0 Callout device for ttyUB0
1 = /dev/cuub1 Callout device for ttyUB1
217 char Bluetooth RFCOMM TTY devices (alternate devices)
0 = /dev/curf0 Callout device for rfcomm0
1 = /dev/curf1 Callout device for rfcomm1
...
218 char The Logical Company bus Unibus/Qbus adapters

50
Documentation/dvb/README.dvb-usb
View File

@ -50,12 +50,12 @@ http://www.linuxtv.org/wiki/index.php/DVB_USB
0. History & News:
2005-06-30 - added support for WideView WT-220U (Thanks to Steve Chang)
2005-05-30 - added basic isochronous support to the dvb-usb-framework
added support for Conexant Hybrid reference design and Nebula DigiTV USB
added support for Conexant Hybrid reference design and Nebula DigiTV USB
2005-04-17 - all dibusb devices ported to make use of the dvb-usb-framework
2005-04-02 - re-enabled and improved remote control code.
2005-03-31 - ported the Yakumo/Hama/Typhoon DVB-T USB2.0 device to dvb-usb.
2005-03-30 - first commit of the dvb-usb-module based on the dibusb-source. First device is a new driver for the
TwinhanDTV Alpha / MagicBox II USB2.0-only DVB-T device.
TwinhanDTV Alpha / MagicBox II USB2.0-only DVB-T device.
(change from dvb-dibusb to dvb-usb)
2005-03-28 - added support for the AVerMedia AverTV DVB-T USB2.0 device (Thanks to Glen Harris and Jiun-Kuei Jung, AVerMedia)
@ -64,50 +64,50 @@ http://www.linuxtv.org/wiki/index.php/DVB_USB
2005-02-02 - added support for the Hauppauge Win-TV Nova-T USB2
2005-01-31 - distorted streaming is gone for USB1.1 devices
2005-01-13 - moved the mirrored pid_filter_table back to dvb-dibusb
- first almost working version for HanfTek UMT-010
- found out, that Yakumo/HAMA/Typhoon are predecessors of the HanfTek UMT-010
- first almost working version for HanfTek UMT-010
- found out, that Yakumo/HAMA/Typhoon are predecessors of the HanfTek UMT-010
2005-01-10 - refactoring completed, now everything is very delightful
- tuner quirks for some weird devices (Artec T1 AN2235 device has sometimes a
Panasonic Tuner assembled). Tunerprobing implemented. Thanks a lot to Gunnar Wittich.
- tuner quirks for some weird devices (Artec T1 AN2235 device has sometimes a
Panasonic Tuner assembled). Tunerprobing implemented. Thanks a lot to Gunnar Wittich.
2004-12-29 - after several days of struggling around bug of no returning URBs fixed.
2004-12-26 - refactored the dibusb-driver, splitted into separate files
- i2c-probing enabled
- i2c-probing enabled
2004-12-06 - possibility for demod i2c-address probing
- new usb IDs (Compro, Artec)
- new usb IDs (Compro, Artec)
2004-11-23 - merged changes from DiB3000MC_ver2.1
- revised the debugging
- possibility to deliver the complete TS for USB2.0
- revised the debugging
- possibility to deliver the complete TS for USB2.0
2004-11-21 - first working version of the dib3000mc/p frontend driver.
2004-11-12 - added additional remote control keys. Thanks to Uwe Hanke.
2004-11-07 - added remote control support. Thanks to David Matthews.
2004-11-05 - added support for a new devices (Grandtec/Avermedia/Artec)
- merged my changes (for dib3000mb/dibusb) to the FE_REFACTORING, because it became HEAD
- moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems
better settled there (added xfer_ops-struct)
- created a common files for frontends (mc/p/mb)
- merged my changes (for dib3000mb/dibusb) to the FE_REFACTORING, because it became HEAD
- moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems
better settled there (added xfer_ops-struct)
- created a common files for frontends (mc/p/mb)
2004-09-28 - added support for a new device (Unkown, vendor ID is Hyper-Paltek)
2004-09-20 - added support for a new device (Compro DVB-U2000), thanks
to Amaury Demol for reporting
- changed usb TS transfer method (several urbs, stopping transfer
before setting a new pid)
to Amaury Demol for reporting
- changed usb TS transfer method (several urbs, stopping transfer
before setting a new pid)
2004-09-13 - added support for a new device (Artec T1 USB TVBOX), thanks
to Christian Motschke for reporting
to Christian Motschke for reporting
2004-09-05 - released the dibusb device and dib3000mb-frontend driver
(old news for vp7041.c)
2004-07-15 - found out, by accident, that the device has a TUA6010XS for
PLL
PLL
2004-07-12 - figured out, that the driver should also work with the
CTS Portable (Chinese Television System)
CTS Portable (Chinese Television System)
2004-07-08 - firmware-extraction-2.422-problem solved, driver is now working
properly with firmware extracted from 2.422
- #if for 2.6.4 (dvb), compile issue
- changed firmware handling, see vp7041.txt sec 1.1
properly with firmware extracted from 2.422
- #if for 2.6.4 (dvb), compile issue
- changed firmware handling, see vp7041.txt sec 1.1
2004-07-02 - some tuner modifications, v0.1, cleanups, first public
2004-06-28 - now using the dvb_dmx_swfilter_packets, everything
runs fine now
runs fine now
2004-06-27 - able to watch and switching channels (pre-alpha)
- no section filtering yet
- no section filtering yet
2004-06-06 - first TS received, but kernel oops :/
2004-05-14 - firmware loader is working
2004-05-11 - start writing the driver

2
Documentation/dvb/README.flexcop
View File

@ -174,7 +174,7 @@ Debugging
Everything which is identical in the following table, can be put into a common
flexcop-module.
PCI USB
PCI USB
-------------------------------------------------------------------------------
Different:
Register access: accessing IO memory USB control message

2
Documentation/dvb/avermedia.txt
View File

@ -1,6 +1,6 @@
HOWTO: Get An Avermedia DVB-T working under Linux
______________________________________________
______________________________________________
Table of Contents
Assumptions and Introduction

8
Documentation/dvb/cards.txt
View File

@ -16,7 +16,7 @@ Hardware supported by the linuxtv.org DVB drivers
shielding, and the whole metal box has its own part number.
o Frontends drivers:
o Frontends drivers:
- dvb_dummy_fe: for testing...
DVB-S:
- ves1x93 : Alps BSRV2 (ves1893 demodulator) and dbox2 (ves1993)
@ -24,7 +24,7 @@ o Frontends drivers:
- grundig_29504-491 : Grundig 29504-491 (Philips TDA8083 demodulator), tsa5522 PLL
- mt312 : Zarlink mt312 or Mitel vp310 demodulator, sl1935 or tsa5059 PLL
- stv0299 : Alps BSRU6 (tsa5059 PLL), LG TDQB-S00x (tsa5059 PLL),
LG TDQF-S001F (sl1935 PLL), Philips SU1278 (tua6100 PLL),
LG TDQF-S001F (sl1935 PLL), Philips SU1278 (tua6100 PLL),
Philips SU1278SH (tsa5059 PLL), Samsung TBMU24112IMB
DVB-C:
- ves1820 : various (ves1820 demodulator, sp5659c or spXXXX PLL)
@ -35,8 +35,8 @@ o Frontends drivers:
- grundig_29504-401 : Grundig 29504-401 (LSI L64781 demodulator), tsa5060 PLL
- tda1004x : Philips tda10045h (td1344 or tdm1316l PLL)
- nxt6000 : Alps TDME7 (MITEL SP5659 PLL), Alps TDED4 (TI ALP510 PLL),
Comtech DVBT-6k07 (SP5730 PLL)
(NxtWave Communications NXT6000 demodulator)
Comtech DVBT-6k07 (SP5730 PLL)
(NxtWave Communications NXT6000 demodulator)
- sp887x : Microtune 7202D
- dib3000mb : DiBcom 3000-MB demodulator
DVB-S/C/T:

4
Documentation/dvb/contributors.txt
View File

@ -15,7 +15,7 @@ Michael Holzt <kju@debian.org>
Diego Picciani <d.picciani@novacomp.it>
for CyberLogin for Linux which allows logging onto EON
(in case you are wondering where CyberLogin is, EON changed its login
(in case you are wondering where CyberLogin is, EON changed its login
procedure and CyberLogin is no longer used.)
Martin Schaller <martin@smurf.franken.de>
@ -57,7 +57,7 @@ Augusto Cardoso <augusto@carhil.net>
Davor Emard <emard@softhome.net>
for his work on the budget drivers, the demux code,
the module unloading problems, ...
Hans-Frieder Vogt <hfvogt@arcor.de>
for his work on calculating and checking the crc's for the
TechnoTrend/Hauppauge DEC driver firmware

1
Documentation/dvb/faq.txt
View File

@ -60,7 +60,6 @@ Some very frequently asked questions about linuxtv-dvb
Metzler Bros. DVB development; alternate drivers and
DVB utilities, include dvb-mpegtools and tuxzap.
http://www.linuxstb.org/
http://sourceforge.net/projects/dvbtools/
Dave Chapman's dvbtools package, including
dvbstream and dvbtune

4
Documentation/dvb/readme.txt
View File

@ -20,7 +20,7 @@ http://linuxtv.org/downloads/
What's inside this directory:
"cards.txt"
"cards.txt"
contains a list of supported hardware.
"contributors.txt"
@ -37,7 +37,7 @@ that require it.
contains detailed informations about the
TT DEC2000/DEC3000 USB DVB hardware.
"bt8xx.txt"
"bt8xx.txt"
contains detailed installation instructions for the
various bt8xx based "budget" DVB cards
(Nebula, Pinnacle PCTV, Twinhan DST)

2
Documentation/early-userspace/README
View File

@ -28,7 +28,7 @@ the image from specifications.
CPIO ARCHIVE method
You can create a cpio archive that contains the early userspace image.
Youre cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it
Your cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it
will be used directly. Only a single cpio file may be specified in
CONFIG_INITRAMFS_SOURCE and directory and file names are not allowed in
combination with a cpio archive.

19
Documentation/feature-removal-schedule.txt
View File

@ -140,3 +140,22 @@ What: EXPORT_SYMBOL(lookup_hash)
When: January 2006
Why: Too low-level interface. Use lookup_one_len or lookup_create instead.
Who: Christoph Hellwig <hch@lst.de>
---------------------------
What: START_ARRAY ioctl for md
When: July 2006
Files: drivers/md/md.c
Why: Not reliable by design - can fail when most needed.
Alternatives exist
Who: NeilBrown <neilb@suse.de>
---------------------------
What: au1x00_uart driver
When: January 2006
Why: The 8250 serial driver now has the ability to deal with the differences
between the standard 8250 family of UARTs and their slightly strange
brother on Alchemy SOCs. The loss of features is not considered an
issue.
Who: Ralf Baechle <ralf@linux-mips.org>

2
Documentation/filesystems/affs.txt
View File

@ -216,4 +216,4 @@ due to an incompatibility with the Amiga floppy controller.
If you are interested in an Amiga Emulator for Linux, look at
http://www-users.informatik.rwth-aachen.de/~crux/uae.html
http://www.freiburg.linux.de/~uae/

3
Documentation/filesystems/ext2.txt
View File

@ -369,9 +369,8 @@ The kernel source file:/usr/src/linux/fs/ext2/
e2fsprogs (e2fsck) http://e2fsprogs.sourceforge.net/
Design & Implementation http://e2fsprogs.sourceforge.net/ext2intro.html
Journaling (ext3) ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/
Hashed Directories http://kernelnewbies.org/~phillips/htree/
Filesystem Resizing http://ext2resize.sourceforge.net/
Compression (*) http://www.netspace.net.au/~reiter/e2compr/
Compression (*) http://e2compr.sourceforge.net/
Implementations for:
Windows 95/98/NT/2000 http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm

22
Documentation/filesystems/ext3.txt
View File

@ -57,19 +57,19 @@ oldalloc This disables the Orlov block allocator and enables the
we'd like to get some feedback if it's the contrary for
you.
user_xattr (*) Enables POSIX Extended Attributes. It's enabled by
default, however you need to confifure its support
(CONFIG_EXT3_FS_XATTR). This is neccesary if you want
to use POSIX Acces Control Lists support. You can visit
http://acl.bestbits.at to know more about POSIX Extended
attributes.
user_xattr Enables Extended User Attributes. Additionally, you need
to have extended attribute support enabled in the kernel
configuration (CONFIG_EXT3_FS_XATTR). See the attr(5)
manual page and http://acl.bestbits.at to learn more
about extended attributes.
nouser_xattr Disables POSIX Extended Attributes.
nouser_xattr Disables Extended User Attributes.
acl (*) Enables POSIX Access Control Lists support. This is
enabled by default, however you need to configure
its support (CONFIG_EXT3_FS_POSIX_ACL). If you want
to know more about ACLs visit http://acl.bestbits.at
acl Enables POSIX Access Control Lists support. Additionally,
you need to have ACL support enabled in the kernel
configuration (CONFIG_EXT3_FS_POSIX_ACL). See the acl(5)
manual page and http://acl.bestbits.at for more
information.
noacl This option disables POSIX Access Control List support.

10
Documentation/floppy.txt
View File

@ -4,7 +4,7 @@ FAQ list:
=========
A FAQ list may be found in the fdutils package (see below), and also
at http://fdutils.linux.lu/FAQ.html
at <http://fdutils.linux.lu/faq.html>.
LILO configuration options (Thinkpad users, read this)
@ -217,10 +217,10 @@ It also contains additional documentation about the floppy driver.
The latest version can be found at fdutils homepage:
http://fdutils.linux.lu
The fdutils-5.4 release can be found at:
http://fdutils.linux.lu/fdutils-5.4.src.tar.gz
http://www.tux.org/pub/knaff/fdutils/fdutils-5.4.src.tar.gz
ftp://metalab.unc.edu/pub/Linux/utils/disk-management/fdutils-5.4.src.tar.gz
The fdutils releases can be found at:
http://fdutils.linux.lu/download.html
http://www.tux.org/pub/knaff/fdutils/
ftp://metalab.unc.edu/pub/Linux/utils/disk-management/
Reporting problems about the floppy driver
==========================================

2
Documentation/ioctl-number.txt
View File

@ -133,7 +133,7 @@ Code Seq# Include File Comments
'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system
<http://mikonos.dia.unisa.it/tcfs>
'l' 40-7F linux/udf_fs_i.h in development:
<http://www.trylinux.com/projects/udf/>
<http://sourceforge.net/projects/linux-udf/>
'm' all linux/mtio.h conflict!
'm' all linux/soundcard.h conflict!
'm' all linux/synclink.h conflict!

60
Documentation/kernel-docs.txt
View File

@ -196,7 +196,7 @@
* Title: "Writing Linux Device Drivers"
Author: Michael K. Johnson.
URL: http://people.redhat.com/johnsonm/devices.html
URL: http://users.evitech.fi/~tk/rtos/writing_linux_device_d.html
Keywords: files, VFS, file operations, kernel interface, character
vs block devices, I/O access, hardware interrupts, DMA, access to
user memory, memory allocation, timers.
@ -284,7 +284,7 @@
* Title: "Linux Kernel Module Programming Guide"
Author: Ori Pomerantz.
URL: http://www.tldp.org/LDP/lkmpg/mpg.html
URL: http://tldp.org/LDP/lkmpg/2.6/html/index.html
Keywords: modules, GPL book, /proc, ioctls, system calls,
interrupt handlers .
Description: Very nice 92 pages GPL book on the topic of modules
@ -292,7 +292,7 @@
* Title: "Device File System (devfs) Overview"
Author: Richard Gooch.
URL: http://www.atnf.csiro.au/~rgooch/linux/docs/devfs.txt
URL: http://www.atnf.csiro.au/people/rgooch/linux/docs/devfs.html
Keywords: filesystem, /dev, devfs, dynamic devices, major/minor
allocation, device management.
Description: Document describing Richard Gooch's controversial
@ -316,9 +316,8 @@
* Title: "The Kernel Hacking HOWTO"
Author: Various Talented People, and Rusty.
URL:
http://www.lisoleg.net/doc/Kernel-Hacking-HOWTO/kernel-hacking-HOW
TO.html
Location: in kernel tree, Documentation/DocBook/kernel-hacking/
(must be built as "make {htmldocs | psdocs | pdfdocs})
Keywords: HOWTO, kernel contexts, deadlock, locking, modules,
symbols, return conventions.
Description: From the Introduction: "Please understand that I
@ -332,13 +331,13 @@
originally written for the 2.3 kernels, but nearly all of it
applies to 2.2 too; 2.0 is slightly different".
* Title: "ALSA 0.5.0 Developer documentation"
Author: Stephan 'Jumpy' Bartels .
URL: http://www.math.TU-Berlin.de/~sbartels/alsa/
* Title: "Writing an ALSA Driver"
Author: Takashi Iwai <tiwai@suse.de>
URL: http://www.alsa-project.org/~iwai/writing-an-alsa-driver/index.html
Keywords: ALSA, sound, soundcard, driver, lowlevel, hardware.
Description: Advanced Linux Sound Architecture for developers,
both at kernel and user-level sides. Work in progress. ALSA is
supposed to be Linux's next generation sound architecture.
both at kernel and user-level sides. ALSA is the Linux kernel
sound architecture in the 2.6 kernel version.
* Title: "Programming Guide for Linux USB Device Drivers"
Author: Detlef Fliegl.
@ -369,8 +368,8 @@
filesystems, IPC and Networking Code.
* Title: "Linux Kernel Mailing List Glossary"
Author: John Levon.
URL: http://www.movement.uklinux.net/glossary.html
Author: various
URL: http://kernelnewbies.org/glossary/
Keywords: glossary, terms, linux-kernel.
Description: From the introduction: "This glossary is intended as
a brief description of some of the acronyms and terms you may hear
@ -378,9 +377,8 @@
* Title: "Linux Kernel Locking HOWTO"
Author: Various Talented People, and Rusty.
URL:
http://netfilter.kernelnotes.org/unreliable-guides/kernel-locking-
HOWTO.html
Location: in kernel tree, Documentation/DocBook/kernel-locking/
(must be built as "make {htmldocs | psdocs | pdfdocs})
Keywords: locks, locking, spinlock, semaphore, atomic, race
condition, bottom halves, tasklets, softirqs.
Description: The title says it all: document describing the
@ -490,7 +488,7 @@
* Title: "Get those boards talking under Linux."
Author: Alex Ivchenko.
URL: http://www.ednmag.com/ednmag/reg/2000/06222000/13df2.htm
URL: http://www.edn.com/article/CA46968.html
Keywords: data-acquisition boards, drivers, modules, interrupts,
memory allocation.
Description: Article written for people wishing to make their data
@ -498,7 +496,7 @@
overview on writing drivers, from the naming of functions to
interrupt handling.
Notes: Two-parts article. Part II is at
http://www.ednmag.com/ednmag/reg/2000/07062000/14df.htm
URL: http://www.edn.com/article/CA46998.html
* Title: "Linux PCMCIA Programmer's Guide"
Author: David Hinds.
@ -529,7 +527,7 @@
definitive guide for hackers, virus coders and system
administrators."
Author: pragmatic/THC.
URL: http://packetstorm.securify.com/groups/thc/LKM_HACKING.html
URL: http://packetstormsecurity.org/docs/hack/LKM_HACKING.html
Keywords: syscalls, intercept, hide, abuse, symbol table.
Description: Interesting paper on how to abuse the Linux kernel in
order to intercept and modify syscalls, make
@ -537,8 +535,7 @@
write kernel modules based virus... and solutions for admins to
avoid all those abuses.
Notes: For 2.0.x kernels. Gives guidances to port it to 2.2.x
kernels. Also available in txt format at
http://www.blacknemesis.org/hacking/txt/cllkm.txt
kernels.
BOOKS: (Not on-line)
@ -557,7 +554,17 @@
ISBN: 0-59600-008-1
Notes: Further information in
http://www.oreilly.com/catalog/linuxdrive2/
* Title: "Linux Device Drivers, 3nd Edition"
Authors: Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman
Publisher: O'Reilly & Associates.
Date: 2005.
Pages: 636.
ISBN: 0-596-00590-3
Notes: Further information in
http://www.oreilly.com/catalog/linuxdrive3/
PDF format, URL: http://lwn.net/Kernel/LDD3/
* Title: "Linux Kernel Internals"
Author: Michael Beck.
Publisher: Addison-Wesley.
@ -766,12 +773,15 @@
documents, FAQs...
* Name: "linux-kernel mailing list archives and search engines"
URL: http://vger.kernel.org/vger-lists.html
URL: http://www.uwsg.indiana.edu/hypermail/linux/kernel/index.html
URL: http://www.kernelnotes.org/lnxlists/linux-kernel/
URL: http://www.geocrawler.com
URL: http://marc.theaimsgroup.com/?l=linux-kernel
URL: http://groups.google.com/group/mlist.linux.kernel
URL: http://www.cs.helsinki.fi/linux/linux-kernel/
URL: http://www.lib.uaa.alaska.edu/linux-kernel/
Keywords: linux-kernel, archives, search.
Description: Some of the linux-kernel mailing list archivers. If
you have a better/another one, please let me know.
_________________________________________________________________
Document last updated on Thu Jun 28 15:09:39 CEST 2001
Document last updated on Sat 2005-NOV-19

2
Documentation/mca.txt
View File

@ -252,7 +252,7 @@ their names here, but I don't have a list handy. Check the MCA Linux
home page (URL below) for a perpetually out-of-date list.
=====================================================================
MCA Linux Home Page: http://glycerine.itsmm.uni.edu/mca/
MCA Linux Home Page: http://www.dgmicro.com/mca/
Christophe Beauregard
chrisb@truespectra.com

56
Documentation/networking/dccp.txt Normal file
View File

@ -0,0 +1,56 @@
DCCP protocol
============
Last updated: 10 November 2005
Contents
========
- Introduction
- Missing features
- Socket options
- Notes
Introduction
============
Datagram Congestion Control Protocol (DCCP) is an unreliable, connection
based protocol designed to solve issues present in UDP and TCP particularly
for real time and multimedia traffic.
It has a base protocol and pluggable congestion control IDs (CCIDs).
It is at draft RFC status and the homepage for DCCP as a protocol is at:
http://www.icir.org/kohler/dcp/
Missing features
================
The DCCP implementation does not currently have all the features that are in
the draft RFC.
In particular the following are missing:
- CCID2 support
- feature negotiation
When testing against other implementations it appears that elapsed time
options are not coded compliant to the specification.
Socket options
==============
DCCP_SOCKOPT_PACKET_SIZE is used for CCID3 to set default packet size for
calculations.
DCCP_SOCKOPT_SERVICE sets the service. This is compulsory as per the
specification. If you don't set it you will get EPROTO.
Notes
=====
SELinux does not yet have support for DCCP. You will need to turn it off or
else you will get EACCES.
DCCP does not travel through NAT successfully at present. This is because
the checksum covers the psuedo-header as per TCP and UDP. It should be
relatively trivial to add Linux NAT support for DCCP.

5
Documentation/networking/driver.txt
View File

@ -1,7 +1,4 @@
Documents about softnet driver issues in general can be found
at:
http://www.firstfloor.org/~andi/softnet/
Document about softnet driver issues
Transmit path guidelines:

9
Documentation/networking/ifenslave.c
View File

@ -693,13 +693,7 @@ static int enslave(char *master_ifname, char *slave_ifname)
/* Older bonding versions would panic if the slave has no IP
* address, so get the IP setting from the master.
*/
res = set_if_addr(master_ifname, slave_ifname);
if (res) {
fprintf(stderr,
"Slave '%s': Error: set address failed\n",
slave_ifname);
return res;
}
set_if_addr(master_ifname, slave_ifname);
} else {
res = clear_if_addr(slave_ifname);
if (res) {
@ -1085,7 +1079,6 @@ static int set_if_addr(char *master_ifname, char *slave_ifname)
slave_ifname, ifra[i].req_name,
strerror(saved_errno));
return res;
}
ipaddr = ifr.ifr_addr.sa_data;

5
Documentation/networking/ip-sysctl.txt
View File

@ -78,6 +78,11 @@ inet_peer_gc_maxtime - INTEGER
TCP variables:
tcp_abc - INTEGER
Controls Appropriate Byte Count defined in RFC3465. If set to
0 then does congestion avoid once per ack. 1 is conservative
value, and 2 is more agressive.
tcp_syn_retries - INTEGER
Number of times initial SYNs for an active TCP connection attempt
will be retransmitted. Should not be higher than 255. Default value

2
Documentation/networking/iphase.txt
View File

@ -22,7 +22,7 @@ The features and limitations of this driver are as follows:
- All variants of Interphase ATM PCI (i)Chip adapter cards are supported,
including x575 (OC3, control memory 128K , 512K and packet memory 128K,
512K and 1M), x525 (UTP25) and x531 (DS3 and E3). See
http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM
http://www.iphase.com/site/iphase-web/?epi_menuItemID=e196f04b4b3b40502f150882e21046a0
for details.
- Only x86 platforms are supported.
- SMP is supported.

8
Documentation/networking/irda.txt
View File

@ -3,12 +3,8 @@ of the IrDA Utilities. More detailed information about these and associated
programs can be found on http://irda.sourceforge.net/
For more information about how to use the IrDA protocol stack, see the
Linux Infared HOWTO (http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html)
by Werner Heuser <wehe@tuxmobil.org>
Linux Infrared HOWTO by Werner Heuser <wehe@tuxmobil.org>:
<http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html>
There is an active mailing list for discussing Linux-IrDA matters called
irda-users@lists.sourceforge.net

3
Documentation/networking/ray_cs.txt
View File

@ -29,8 +29,7 @@ with nondefault parameters, they can be edited in
will find them all.
Information on card services is available at:
ftp://hyper.stanford.edu/pub/pcmcia/doc
http://hyper.stanford.edu/HyperNews/get/pcmcia/home.html
http://pcmcia-cs.sourceforge.net/
Card services user programs are still required for PCMCIA devices.

28
Documentation/networking/vortex.txt
View File

@ -11,7 +11,7 @@ The driver was written by Donald Becker <becker@scyld.com>
Don is no longer the prime maintainer of this version of the driver.
Please report problems to one or more of:
Andrew Morton <andrewm@uow.edu.au>
Andrew Morton <akpm@osdl.org>
Netdev mailing list <netdev@vger.kernel.org>
Linux kernel mailing list <linux-kernel@vger.kernel.org>
@ -274,24 +274,24 @@ Details of the device driver implementation are at the top of the source file.
Additional documentation is available at Don Becker's Linux Drivers site:
http://www.scyld.com/network/vortex.html
http://www.scyld.com/vortex.html
Donald Becker's driver development site:
http://www.scyld.com/network
http://www.scyld.com/network.html
Donald's vortex-diag program is useful for inspecting the NIC's state:
http://www.scyld.com/diag/#pci-diags
http://www.scyld.com/ethercard_diag.html
Donald's mii-diag program may be used for inspecting and manipulating
the NIC's Media Independent Interface subsystem:
http://www.scyld.com/diag/#mii-diag
http://www.scyld.com/ethercard_diag.html#mii-diag
Donald's wake-on-LAN page:
http://www.scyld.com/expert/wake-on-lan.html
http://www.scyld.com/wakeonlan.html
3Com's documentation for many NICs, including the ones supported by
this driver is available at
@ -305,7 +305,7 @@ this driver is available at
Driver updates and a detailed changelog for the modifications which
were made for the 2.3/2,4 series kernel is available at
http://www.uow.edu.au/~andrewm/linux/#3c59x-2.3
http://www.zip.com.au/~akpm/linux/#3c59x-bc
Autonegotiation notes
@ -434,8 +434,8 @@ steps you should take:
send all logs to the maintainer.
3) Download you card's diagnostic tool from Donald
Backer's website http://www.scyld.com/diag. Download
mii-diag.c as well. Build these.
Becker's website <http://www.scyld.com/ethercard_diag.html>.
Download mii-diag.c as well. Build these.
a) Run 'vortex-diag -aaee' and 'mii-diag -v' when the card is
working correctly. Save the output.
@ -443,8 +443,8 @@ steps you should take:
b) Run the above commands when the card is malfunctioning. Send
both sets of output.
Finally, please be patient and be prepared to do some work. You may end up working on
this problem for a week or more as the maintainer asks more questions, asks for more
tests, asks for patches to be applied, etc. At the end of it all, the problem may even
remain unresolved.
Finally, please be patient and be prepared to do some work. You may
end up working on this problem for a week or more as the maintainer
asks more questions, asks for more tests, asks for patches to be
applied, etc. At the end of it all, the problem may even remain
unresolved.

7
Documentation/oops-tracing.txt
View File

@ -30,7 +30,12 @@ the disk is not available then you have three options :-
(1) Hand copy the text from the screen and type it in after the machine
has restarted. Messy but it is the only option if you have not
planned for a crash.
planned for a crash. Alternatively, you can take a picture of
the screen with a digital camera - not nice, but better than
nothing. If the messages scroll off the top of the console, you
may find that booting with a higher resolution (eg, vga=791)
will allow you to read more of the text. (Caveat: This needs vesafb,
so won't help for 'early' oopses)
(2) Boot with a serial console (see Documentation/serial-console.txt),
run a null modem to a second machine and capture the output there

2
Documentation/power/pci.txt
View File

@ -335,5 +335,5 @@ this on the whole.
PCI Local Bus Specification
PCI Bus Power Management Interface Specification
http://pcisig.org
http://www.pcisig.com

2
Documentation/scsi/00-INDEX
View File

@ -52,8 +52,6 @@ ppa.txt
- info on driver for IOmega zip drive
qlogicfas.txt
- info on driver for QLogic FASxxx based adapters
qlogicisp.txt
- info on driver for QLogic ISP 1020 based adapters
scsi-generic.txt
- info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
scsi.txt

4
Documentation/scsi/ibmmca.txt
View File

@ -1108,7 +1108,7 @@
A: You have to activate MCA bus support, first.
Q: Where can I find the latest info about this driver?
A: See the file MAINTAINERS for the current WWW-address, which offers
updates, info and Q/A lists. At this files' origin, the webaddress
updates, info and Q/A lists. At this file's origin, the webaddress
was: http://www.uni-mainz.de/~langm000/linux.html
Q: My SCSI-adapter is not recognized by the driver, what can I do?
A: Just force it to be recognized by kernel parameters. See section 5.1.
@ -1248,7 +1248,7 @@
--------------------
The address of the IBM SCSI-subsystem supporting WWW-page is:
http://www.uni-mainz.de/~langm000/linux.html
http://www.staff.uni-mainz.de/mlang/linux.html
Here you can find info about the background of this driver, patches,
troubleshooting support, news and a bugreport form. Please check that

3
Documentation/scsi/qlogicfas.txt
View File

@ -11,8 +11,7 @@ Qlogic boards:
* IQ-PCI-10
* IQ-PCI-D
is provided by the qlogicisp.c driver. Check README.qlogicisp for
details.
is provided by the qla1280 driver.
Nor does it support the PCI-Basic, which is supported by the
'am53c974' driver.

30
Documentation/scsi/qlogicisp.txt
View File

@ -1,30 +0,0 @@
Notes for the QLogic ISP1020 PCI SCSI Driver:
This driver works well in practice, but does not support disconnect/
reconnect, which makes using it with tape drives impractical.
It should work for most host adaptors with the ISP1020 chip. The
QLogic Corporation produces several PCI SCSI adapters which should
work:
* IQ-PCI
* IQ-PCI-10
* IQ-PCI-D
This driver may work with boards containing the ISP1020A or ISP1040A
chips, but that has not been tested.
This driver will NOT work with:
* ISA or VL Bus Qlogic cards (they use the 'qlogicfas' driver)
* PCI-basic (it uses the 'am53c974' driver)
Much thanks to QLogic's tech support for providing the latest ISP1020
firmware, and for taking the time to review my code.
Erik Moe
ehm@cris.com
Revised:
Michael A. Griffith
grif@cs.ucr.edu

8
Documentation/scsi/scsi_eh.txt
View File

@ -83,11 +83,11 @@ with the command.
The timeout handler is scsi_times_out(). When a timeout occurs, this
function
1. invokes optional hostt->eh_timedout() callback. Return value can
1. invokes optional hostt->eh_timed_out() callback. Return value can
be one of
- EH_HANDLED
This indicates that eh_timedout() dealt with the timeout. The
This indicates that eh_timed_out() dealt with the timeout. The
scmd is passed to __scsi_done() and thus linked into per-cpu
scsi_done_q. Normal command completion described in [1-2-1]
follows.
@ -105,7 +105,7 @@ function
command will time out again.
- EH_NOT_HANDLED
This is the same as when eh_timedout() callback doesn't exist.
This is the same as when eh_timed_out() callback doesn't exist.
Step #2 is taken.
2. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the
@ -142,7 +142,7 @@ are linked on shost->eh_cmd_q.
Note that this does not mean lower layers are quiescent. If a LLDD
completed a scmd with error status, the LLDD and lower layers are
assumed to forget about the scmd at that point. However, if a scmd
has timed out, unless hostt->eh_timedout() made lower layers forget
has timed out, unless hostt->eh_timed_out() made lower layers forget
about the scmd, which currently no LLDD does, the command is still
active as long as lower layers are concerned and completion could
occur at any time. Of course, all such completions are ignored as the

4
Documentation/scsi/scsi_mid_low_api.txt
View File

@ -346,7 +346,7 @@ Next, there is a movement to "outlaw" typedefs introducing synonyms for
struct tags. Both can be still found in the SCSI subsystem, but
the typedefs have been moved to a single file, scsi_typedefs.h to
make their future removal easier, for example:
"typedef struct scsi_host_template Scsi_Host_Template;"
"typedef struct scsi_cmnd Scsi_Cmnd;"
Also, most C99 enhancements are encouraged to the extent they are supported
by the relevant gcc compilers. So C99 style structure and array
@ -718,7 +718,7 @@ void scsi_report_bus_reset(struct Scsi_Host * shost, int channel)
*
* Defined in: drivers/scsi/scsi.c .
**/
int scsi_track_queue_full(Scsi_Device *sdev, int depth)
int scsi_track_queue_full(struct scsi_device *sdev, int depth)
/**

44
Documentation/usb/bluetooth.txt
View File

@ -1,44 +0,0 @@
INTRODUCTION
The USB Bluetooth driver supports any USB Bluetooth device.
It currently works well with the Linux USB Bluetooth stack from Axis
(available at http://developer.axis.com/software/bluetooth/ ) and
has been rumored to work with other Linux USB Bluetooth stacks.
CONFIGURATION
Currently the driver can handle up to 256 different USB Bluetooth
devices at once.
If you are not using devfs:
The major number that the driver uses is 216 so to use the driver,
create the following nodes:
mknod /dev/ttyUB0 c 216 0
mknod /dev/ttyUB1 c 216 1
mknod /dev/ttyUB2 c 216 2
mknod /dev/ttyUB3 c 216 3
.
.
.
mknod /dev/ttyUB254 c 216 254
mknod /dev/ttyUB255 c 216 255
If you are using devfs:
The devices supported by this driver will show up as
/dev/usb/ttub/{0,1,...}
When the device is connected and recognized by the driver, the driver
will print to the system log, which node the device has been bound to.
CONTACT:
If anyone has any problems using this driver, please contact me, or
join the Linux-USB mailing list (information on joining the mailing
list, as well as a link to its searchable archive is at
http://www.linux-usb.org/ )
Greg Kroah-Hartman
greg@kroah.com

5
Documentation/usb/error-codes.txt
View File

@ -46,8 +46,9 @@ USB-specific:
-EMSGSIZE (a) endpoint maxpacket size is zero; it is not usable
in the current interface altsetting.
(b) ISO packet is biger than endpoint maxpacket
(c) requested data transfer size is invalid (negative)
(b) ISO packet is larger than the endpoint maxpacket.
(c) requested data transfer length is invalid: negative
or too large for the host controller.
-ENOSPC This request would overcommit the usb bandwidth reserved
for periodic transfers (interrupt, isochronous).

4
Documentation/usb/ibmcam.txt
View File

@ -28,8 +28,8 @@ SUPPORTED CAMERAS:
Xirlink "C-It" camera, also known as "IBM PC Camera".
The device uses proprietary ASIC (and compression method);
it is manufactured by Xirlink. See http://www.xirlink.com/
http://www.ibmpccamera.com or http://www.c-itnow.com/ for
details and pictures.
(renamed to http://www.veo.com), http://www.ibmpccamera.com,
or http://www.c-itnow.com/ for details and pictures.
This very chipset ("X Chip", as marked at the factory)
is used in several other cameras, and they are supported

4
Documentation/usb/ov511.txt
View File

@ -22,8 +22,8 @@ WHAT YOU NEED:
http://www.ovt.com/omniusbp.html
- A Video4Linux compatible frame grabber program (I recommend vidcat and xawtv)
vidcat is part of the w3cam package: http://www.hdk-berlin.de/~rasca/w3cam/
xawtv is available at: http://www.in-berlin.de/User/kraxel/xawtv.html
vidcat is part of the w3cam package: http://mpx.freeshell.net/
xawtv is available at: http://linux.bytesex.org/xawtv/
HOW TO USE IT:

6
Documentation/usb/rio.txt
View File

@ -46,9 +46,9 @@ Contact information:
--------------------
The main page for the project is hosted at sourceforge.net in the following
address: http://rio500.sourceforge.net You can also go to the sourceforge
project page at: http://sourceforge.net/project/?group_id=1944 There is
also a mailing list: rio500-users@lists.sourceforge.net
URL: <http://rio500.sourceforge.net>. You can also go to the project's
sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
There is also a mailing list: rio500-users@lists.sourceforge.net
Authors:
-------

1
Documentation/video4linux/CARDLIST.bttv
View File

@ -140,3 +140,4 @@
139 -> Prolink PixelView PlayTV MPEG2 PV-M4900
140 -> Osprey 440 [0070:ff07]
141 -> Asound Skyeye PCTV
142 -> Sabrent TV-FM (bttv version)

2
Documentation/video4linux/CARDLIST.saa7134
View File

@ -80,3 +80,5 @@
79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
80 -> ASUS Digimatrix TV [1043:0210]
81 -> Philips Tiger reference design [1131:2018]
82 -> MSI TV@Anywhere plus [1462:6231]

1
Documentation/video4linux/CARDLIST.tuner
View File

@ -67,3 +67,4 @@ tuner=65 - Ymec TVF66T5-B/DFF
tuner=66 - LG NTSC (TALN mini series)
tuner=67 - Philips TD1316 Hybrid Tuner
tuner=68 - Philips TUV1236D ATSC/NTSC dual in
tuner=69 - Tena TNF 5335 MF

7
Documentation/video4linux/zr36120.txt
View File

@ -76,8 +76,11 @@ activates the GRAB bit. A few ms later the VSYNC (re-)rises and
the zoran starts to work on a new and freshly broadcasted frame....
For pointers I used the specs of both chips. Below are the URLs:
http://www.zoran.com/ftp/download/devices/pci/ZR36120/36120data.pdf
http://www-us.semiconductor.philips.com/acrobat/datasheets/SAA_7110_A_1.pdf
http://www.zoran.com/ftp/download/devices/pci/ZR36120/36120data.pdf
http://www-us.semiconductor.philips.com/acrobat/datasheets/SAA_7110_A_1.pdf
Some alternatives for the Philips SAA 7110 datasheet are:
http://www.datasheetcatalog.com/datasheets_pdf/S/A/A/7/SAA7110.shtml
http://www.datasheetarchive.com/search.php?search=SAA7110&sType=part
The documentation has very little on absolute numbers or timings
needed for the various modes/resolutions, but there are other

12
Documentation/x86_64/boot-options.txt
View File

@ -7,10 +7,12 @@ Machine check
mce=off disable machine check
mce=bootlog Enable logging of machine checks left over from booting.
Disabled by default because some BIOS leave bogus ones.
Disabled by default on AMD because some BIOS leave bogus ones.
If your BIOS doesn't do that it's a good idea to enable though
to make sure you log even machine check events that result
in a reboot.
in a reboot. On Intel systems it is enabled by default.
mce=nobootlog
Disable boot machine check logging.
mce=tolerancelevel (number)
0: always panic, 1: panic if deadlock possible,
2: try to avoid panic, 3: never panic or exit (for testing)
@ -122,6 +124,9 @@ SMP
cpumask=MASK only use cpus with bits set in mask
additional_cpus=NUM Allow NUM more CPUs for hotplug
(defaults are specified by the BIOS or half the available CPUs)
NUMA
numa=off Only set up a single NUMA node spanning all memory.
@ -188,6 +193,9 @@ Debugging
kstack=N Print that many words from the kernel stack in oops dumps.
pagefaulttrace Dump all page faults. Only useful for extreme debugging
and will create a lot of output.
Misc
noreplacement Don't replace instructions with more appropiate ones

6
Documentation/x86_64/mm.txt
View File

@ -6,7 +6,7 @@ Virtual memory map with 4 level page tables:
0000000000000000 - 00007fffffffffff (=47bits) user space, different per mm
hole caused by [48:63] sign extension
ffff800000000000 - ffff80ffffffffff (=40bits) guard hole
ffff810000000000 - ffffc0ffffffffff (=46bits) direct mapping of phys. memory
ffff810000000000 - ffffc0ffffffffff (=46bits) direct mapping of all phys. memory
ffffc10000000000 - ffffc1ffffffffff (=40bits) hole
ffffc20000000000 - ffffe1ffffffffff (=45bits) vmalloc/ioremap space
... unused hole ...
@ -14,6 +14,10 @@ ffffffff80000000 - ffffffff82800000 (=40MB) kernel text mapping, from phys 0
... unused hole ...
ffffffff88000000 - fffffffffff00000 (=1919MB) module mapping space
The direct mapping covers all memory in the system upto the highest
memory address (this means in some cases it can also include PCI memory
holes)
vmalloc space is lazily synchronized into the different PML4 pages of
the processes using the page fault handler, with init_level4_pgt as
reference.

70
MAINTAINERS
View File

@ -58,6 +58,7 @@ P: Person
M: Mail patches to
L: Mailing list that is relevant to this area
W: Web-page with status/info
T: SCM tree type and location. Type is one of: git, hg, quilt.
S: Status, one of the following:
Supported: Someone is actually paid to look after this.
@ -183,6 +184,7 @@ P: Len Brown
M: len.brown@intel.com
L: acpi-devel@lists.sourceforge.net
W: http://acpi.sourceforge.net/
T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
S: Maintained
AD1816 SOUND DRIVER
@ -225,6 +227,7 @@ AGPGART DRIVER
P: Dave Jones
M: davej@codemonkey.org.uk
W: http://www.codemonkey.org.uk/projects/agp/
T: git kernel.org:/pub/scm/linux/kernel/git/davej/agpgart.git
S: Maintained
AHA152X SCSI DRIVER
@ -382,6 +385,7 @@ P: David Woodhouse
M: dwmw2@infradead.org
L: linux-audit@redhat.com
W: http://people.redhat.com/sgrubb/audit/
T: git kernel.org:/pub/scm/linux/kernel/git/dwmw2/audit-2.6.git
S: Maintained
AX.25 NETWORK LAYER
@ -418,6 +422,7 @@ BLOCK LAYER
P: Jens Axboe
M: axboe@suse.de
L: linux-kernel@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
S: Maintained
BLUETOOTH SUBSYSTEM
@ -429,6 +434,7 @@ L: bluez-devel@lists.sf.net
W: http://bluez.sf.net
W: http://www.bluez.org
W: http://www.holtmann.org/linux/bluetooth/
T: git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
S: Maintained
BLUETOOTH RFCOMM LAYER
@ -530,6 +536,7 @@ P: Mauro Carvalho Chehab
M: mchehab@brturbo.com.br
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
BUSLOGIC SCSI DRIVER
@ -544,6 +551,7 @@ P: Steve French
M: sfrench@samba.org
L: samba-technical@lists.samba.org
W: http://us1.samba.org/samba/Linux_CIFS_client.html
T: git kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6.git
S: Supported
CIRRUS LOGIC GENERIC FBDEV DRIVER
@ -605,6 +613,7 @@ P: Dave Jones
M: davej@codemonkey.org.uk
L: cpufreq@lists.linux.org.uk
W: http://www.codemonkey.org.uk/projects/cpufreq/
T: git kernel.org/pub/scm/linux/kernel/davej/cpufreq.git
S: Maintained
CPUID/MSR DRIVER
@ -638,6 +647,7 @@ M: herbert@gondor.apana.org.au
P: David S. Miller
M: davem@davemloft.net
L: linux-crypto@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
S: Maintained
CYBERPRO FB DRIVER
@ -707,7 +717,7 @@ DCCP PROTOCOL
P: Arnaldo Carvalho de Melo
M: acme@mandriva.com
L: dccp@vger.kernel.org
W: http://www.wlug.org.nz/DCCP
W: http://linux-net.osdl.org/index.php/DCCP
S: Maintained
DECnet NETWORK LAYER
@ -803,12 +813,14 @@ DRIVER CORE, KOBJECTS, AND SYSFS
P: Greg Kroah-Hartman
M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
DRM DRIVERS
P: David Airlie
M: airlied@linux.ie
L: dri-devel@lists.sourceforge.net
T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
DSCC4 DRIVER
@ -822,6 +834,7 @@ P: LinuxTV.org Project
M: linux-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Supported
EATA-DMA SCSI DRIVER
@ -1113,6 +1126,7 @@ P: Jean Delvare
M: khali@linux-fr.org
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.nu/
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Maintained
I2O
@ -1145,6 +1159,7 @@ P: Tony Luck
M: tony.luck@intel.com
L: linux-ia64@vger.kernel.org
W: http://www.ia64-linux.org/
T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
S: Maintained
SN-IA64 (Itanium) SUB-PLATFORM
@ -1178,6 +1193,7 @@ P: Bartlomiej Zolnierkiewicz
M: B.Zolnierkiewicz@elka.pw.edu.pl
L: linux-kernel@vger.kernel.org
L: linux-ide@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git
S: Maintained
IDE/ATAPI CDROM DRIVER
@ -1212,6 +1228,7 @@ P: Jody McIntyre
M: scjody@steamballoon.com
L: linux1394-devel@lists.sourceforge.net
W: http://www.linux1394.org/
T: git kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
S: Maintained
IEEE 1394 OHCI DRIVER
@ -1263,13 +1280,15 @@ P: Hal Rosenstock
M: halr@voltaire.com
L: openib-general@openib.org
W: http://www.openib.org/
T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
S: Supported
INPUT (KEYBOARD, MOUSE, JOYSTICK) DRIVERS
P: Vojtech Pavlik
M: vojtech@suse.cz
P: Dmitry Torokhov
M: dtor_core@ameritech.net
L: linux-input@atrey.karlin.mff.cuni.cz
L: linux-joystick@atrey.karlin.mff.cuni.cz
T: git kernel.org:/pub/scm/linux/kernel/git/dtor/input.git
S: Maintained
INOTIFY
@ -1383,6 +1402,7 @@ P: Kai Germaschewski
M: kai.germaschewski@gmx.de
L: isdn4linux@listserv.isdn4linux.de
W: http://www.isdn4linux.de
T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git
S: Maintained
ISDN SUBSYSTEM (Eicon active card driver)
@ -1411,6 +1431,7 @@ P: Dave Kleikamp
M: shaggy@austin.ibm.com
L: jfs-discussion@lists.sourceforge.net
W: http://jfs.sourceforge.net/
T: git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
S: Supported
KCONFIG
@ -1436,6 +1457,7 @@ P: Kai Germaschewski
M: kai@germaschewski.name
P: Sam Ravnborg
M: sam@ravnborg.org
T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
S: Maintained
KERNEL JANITORS
@ -1524,6 +1546,7 @@ P: Paul Mackerras
M: paulus@samba.org
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
T: git kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc.git
S: Supported
LINUX FOR POWER MACINTOSH
@ -1565,7 +1588,7 @@ S: Maintained
LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
P: Kumar Gala
M: kumar.gala@freescale.com
M: galak@kernel.crashing.org
W: http://www.penguinppc.org/
L: linuxppc-embedded@ozlabs.org
S: Maintained
@ -1591,6 +1614,7 @@ P: Chris Wright
M: chrisw@osdl.org
L: linux-security-module@wirex.com
W: http://lsm.immunix.org
T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
S: Supported
LM83 HARDWARE MONITOR DRIVER
@ -1612,6 +1636,15 @@ L: ldm-devel@lists.sourceforge.net
W: http://ldm.sourceforge.net
S: Maintained
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
P: Eric Moore
M: Eric.Moore@lsil.com
M: support@lsil.com
L: mpt_linux_developer@lsil.com
L: linux-scsi@vger.kernel.org
W: http://www.lsilogic.com/support
S: Supported
LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers
P: Matthew Wilcox
M: matthew@wil.cx
@ -1685,6 +1718,7 @@ P: David Woodhouse
M: dwmw2@infradead.org
W: http://www.linux-mtd.infradead.org/
L: linux-mtd@lists.infradead.org
T: git kernel.org:/pub/scm/linux/kernel/git/tglx/mtd-2.6.git
S: Maintained
MICROTEK X6 SCANNER
@ -1782,6 +1816,7 @@ M: akpm@osdl.org
P: Jeff Garzik
M: jgarzik@pobox.com
L: netdev@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
S: Maintained
NETWORKING [GENERAL]
@ -1804,6 +1839,7 @@ M: yoshfuji@linux-ipv6.org
P: Patrick McHardy
M: kaber@coreworks.de
L: netdev@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/davem/net-2.6.git
S: Maintained
IPVS
@ -1855,6 +1891,7 @@ M: aia21@cantab.net
L: linux-ntfs-dev@lists.sourceforge.net
L: linux-kernel@vger.kernel.org
W: http://linux-ntfs.sf.net/
T: git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
S: Maintained
NVIDIA (RIVA) FRAMEBUFFER DRIVER
@ -1873,6 +1910,16 @@ L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
OMNIKEY CARDMAN 4000 DRIVER
P: Harald Welte
M: laforge@gnumonks.org
S: Maintained
OMNIKEY CARDMAN 4040 DRIVER
P: Harald Welte
M: laforge@gnumonks.org
S: Maintained
ONSTREAM SCSI TAPE DRIVER
P: Willem Riede
M: osst@riede.org
@ -1949,6 +1996,7 @@ P: Greg Kroah-Hartman
M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
L: linux-pci@atrey.karlin.mff.cuni.cz
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
PCI HOTPLUG CORE
@ -1970,6 +2018,7 @@ S: Maintained
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
S: Maintained
PCNET32 NETWORK DRIVER
@ -1988,7 +2037,6 @@ PKTCDVD DRIVER
P: Peter Osterlund
M: petero2@telia.com
L: linux-kernel@vger.kernel.org
L: packet-writing@suse.com
S: Maintained
POSIX CLOCKS and TIMERS
@ -2180,6 +2228,7 @@ SCSI SUBSYSTEM
P: James E.J. Bottomley
M: James.Bottomley@SteelEye.com
L: linux-scsi@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
S: Maintained
SCSI TAPE DRIVER
@ -2219,6 +2268,7 @@ SERIAL ATA (SATA) SUBSYSTEM:
P: Jeff Garzik
M: jgarzik@pobox.com
L: linux-ide@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
S: Supported
SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
@ -2365,6 +2415,7 @@ P: Anton Blanchard
M: anton@samba.org
L: sparclinux@vger.kernel.org
L: ultralinux@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git
S: Maintained
SHARP LH SUPPORT (LH7952X & LH7A40X)
@ -2503,6 +2554,7 @@ P: Adrian Bunk
M: trivial@kernel.org
L: linux-kernel@vger.kernel.org
W: http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/
T: git kernel.org:/pub/scm/linux/kernel/git/bunk/trivial.git
S: Maintained
TMS380 TOKEN-RING NETWORK DRIVER
@ -2740,6 +2792,7 @@ M: gregkh@suse.de
L: linux-usb-users@lists.sourceforge.net
L: linux-usb-devel@lists.sourceforge.net
W: http://www.linux-usb.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
USB UHCI DRIVER
@ -2835,6 +2888,7 @@ P: Latchesar Ionkov
M: lucho@ionkov.net
L: v9fs-developer@lists.sourceforge.net
W: http://v9fs.sf.net
T: git kernel.org:/pub/scm/linux/kernel/ericvh/v9fs-devel.git
S: Maintained
VIDEO FOR LINUX
@ -2842,6 +2896,7 @@ P: Mauro Carvalho Chehab
M: mchehab@brturbo.com.br
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
W1 DALLAS'S 1-WIRE BUS
@ -2882,6 +2937,11 @@ M: zaga@fly.cc.fer.hr
L: linux-scsi@vger.kernel.org
S: Maintained
WISTRON LAPTOP BUTTON DRIVER
P: Miloslav Trmac
M: mitr@volny.cz
S: Maintained
WL3501 WIRELESS PCMCIA CARD DRIVER
P: Arnaldo Carvalho de Melo
M: acme@conectiva.com.br

22
Makefile
View File

@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 14
SUBLEVEL = 15
EXTRAVERSION =
NAME=Affluent Albatross
NAME=Sliding Snow Leopard
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
@ -168,7 +168,8 @@ KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION)
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ )
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc64/powerpc/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
@ -347,7 +348,7 @@ AFLAGS_KERNEL =
# Needed to be compatible with the O= option
LINUXINCLUDE := -Iinclude \
$(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
-imacros include/linux/autoconf.h
-include include/linux/autoconf.h
CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
@ -1192,6 +1193,17 @@ else
__srctree = $(srctree)/
endif
ifeq ($(ALLSOURCE_ARCHS),)
ifeq ($(ARCH),um)
ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH)
else
ALLINCLUDE_ARCHS := $(ARCH)
endif
else
#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
endif
ALLSOURCE_ARCHS := $(ARCH)
define all-sources
@ -1207,7 +1219,7 @@ define all-sources
find $(__srctree)include $(RCS_FIND_IGNORE) \
\( -name config -o -name 'asm-*' \) -prune \
-o -name '*.[chS]' -print; \
for ARCH in $(ALLSOURCE_ARCHS) ; do \
for ARCH in $(ALLINCLUDE_ARCHS) ; do \
find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
done ; \

5
README
View File

@ -81,6 +81,11 @@ INSTALLING the kernel:
failed patches (xxx# or xxx.rej). If there are, either you or me has
made a mistake.
Unlike patches for the 2.6.x kernels, patches for the 2.6.x.y kernels
(also known as the -stable kernels) are not incremental but instead apply
directly to the base 2.6.x kernel. Please read
Documentation/applying-patches.txt for more information.
Alternatively, the script patch-kernel can be used to automate this
process. It determines the current kernel version and applies any
patches found.

2
arch/alpha/kernel/machvec_impl.h
View File

@ -41,7 +41,7 @@
#define CAT1(x,y) x##y
#define CAT(x,y) CAT1(x,y)
#define DO_DEFAULT_RTC rtc_port: 0x70
#define DO_DEFAULT_RTC .rtc_port = 0x70
#define DO_EV4_MMU \
.max_asn = EV4_MAX_ASN, \

22
arch/arm/Kconfig
View File

@ -239,6 +239,8 @@ source "arch/arm/plat-omap/Kconfig"
source "arch/arm/mach-omap1/Kconfig"
source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-lh7a40x/Kconfig"
@ -650,25 +652,11 @@ endmenu
menu "Power management options"
config PM
bool "Power Management support"
---help---
"Power Management" means that parts of your computer are shut
off or put into a power conserving "sleep" mode if they are not
being used. There are two competing standards for doing this: APM
and ACPI. If you want to use either one, say Y here and then also
to the requisite support below.
Power Management is most important for battery powered laptop
computers; if you have a laptop, check out the Linux Laptop home
page on the WWW at <http://www.linux-on-laptops.com/> or
Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>
and the Battery Powered Linux mini-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
source "kernel/power/Kconfig"
config APM
tristate "Advanced Power Management Emulation"
depends on PM
depends on PM_LEGACY
---help---
APM is a BIOS specification for saving power using several different
techniques. This is mostly useful for battery powered laptops with
@ -700,6 +688,8 @@ menu "Device Drivers"
source "drivers/base/Kconfig"
source "drivers/connector/Kconfig"
if ALIGNMENT_TRAP
source "drivers/mtd/Kconfig"
endif

1
arch/arm/Makefile
View File

@ -93,6 +93,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_IXP2000) := ixp2000
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
incdir-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410
machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x

30
arch/arm/boot/compressed/head.S
View File

@ -19,38 +19,28 @@
*/
#ifdef DEBUG
#include <asm/arch/debug-macro.S>
#if defined(CONFIG_DEBUG_ICEDCC)
.macro loadsp, rb
.endm
.macro writeb, ch, rb
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c1, 0
.endm
#else
#include <asm/arch/debug-macro.S>
.macro writeb, ch, rb
senduart \ch, \rb
.endm
#if defined(CONFIG_FOOTBRIDGE) || \
defined(CONFIG_ARCH_RPC) || \
defined(CONFIG_ARCH_INTEGRATOR) || \
defined(CONFIG_ARCH_PXA) || \
defined(CONFIG_ARCH_IXP4XX) || \
defined(CONFIG_ARCH_IXP2000) || \
defined(CONFIG_ARCH_LH7A40X) || \
defined(CONFIG_ARCH_OMAP)
.macro loadsp, rb
addruart \rb
.endm
#elif defined(CONFIG_ARCH_SA1100)
#if defined(CONFIG_ARCH_SA1100)
.macro loadsp, rb
mov \rb, #0x80000000 @ physical base address
# if defined(CONFIG_DEBUG_LL_SER3)
#ifdef CONFIG_DEBUG_LL_SER3
add \rb, \rb, #0x00050000 @ Ser3
# else
#else
add \rb, \rb, #0x00010000 @ Ser1
# endif
#endif
.endm
#elif defined(CONFIG_ARCH_IOP331)
.macro loadsp, rb
@ -64,7 +54,9 @@
add \rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT
.endm
#else
#error no serial architecture defined
.macro loadsp, rb
addruart \rb
.endm
#endif
#endif
#endif

40
arch/arm/common/locomo.c
View File

@ -550,9 +550,9 @@ struct locomo_save_data {
u16 LCM_SPIMD;
};
static int locomo_suspend(struct device *dev, pm_message_t state)
static int locomo_suspend(struct platform_device *dev, pm_message_t state)
{
struct locomo *lchip = dev_get_drvdata(dev);
struct locomo *lchip = platform_get_drvdata(dev);
struct locomo_save_data *save;
unsigned long flags;
@ -560,7 +560,7 @@ static int locomo_suspend(struct device *dev, pm_message_t state)
if (!save)
return -ENOMEM;
dev->power.saved_state = (void *) save;
dev->dev.power.saved_state = (void *) save;
spin_lock_irqsave(&lchip->lock, flags);
@ -594,14 +594,14 @@ static int locomo_suspend(struct device *dev, pm_message_t state)
return 0;
}
static int locomo_resume(struct device *dev)
static int locomo_resume(struct platform_device *dev)
{
struct locomo *lchip = dev_get_drvdata(dev);
struct locomo *lchip = platform_get_drvdata(dev);
struct locomo_save_data *save;
unsigned long r;
unsigned long flags;
save = (struct locomo_save_data *) dev->power.saved_state;
save = (struct locomo_save_data *) dev->dev.power.saved_state;
if (!save)
return 0;
@ -623,8 +623,6 @@ static int locomo_resume(struct device *dev)
locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD);
spin_unlock_irqrestore(&lchip->lock, flags);
dev->power.saved_state = NULL;
kfree(save);
return 0;
@ -760,27 +758,26 @@ static void __locomo_remove(struct locomo *lchip)
kfree(lchip);
}
static int locomo_probe(struct device *dev)
static int locomo_probe(struct platform_device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct resource *mem;
int irq;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!mem)
return -EINVAL;
irq = platform_get_irq(pdev, 0);
irq = platform_get_irq(dev, 0);
return __locomo_probe(dev, mem, irq);
return __locomo_probe(&dev->dev, mem, irq);
}
static int locomo_remove(struct device *dev)
static int locomo_remove(struct platform_device *dev)
{
struct locomo *lchip = dev_get_drvdata(dev);
struct locomo *lchip = platform_get_drvdata(dev);
if (lchip) {
__locomo_remove(lchip);
dev_set_drvdata(dev, NULL);
platform_set_drvdata(dev, NULL);
}
return 0;
@ -792,15 +789,16 @@ static int locomo_remove(struct device *dev)
* the per-machine level, and then have this driver pick
* up the registered devices.
*/
static struct device_driver locomo_device_driver = {
.name = "locomo",
.bus = &platform_bus_type,
static struct platform_driver locomo_device_driver = {
.probe = locomo_probe,
.remove = locomo_remove,
#ifdef CONFIG_PM
.suspend = locomo_suspend,
.resume = locomo_resume,
#endif
.driver = {
.name = "locomo",
},
};
/*
@ -1126,13 +1124,13 @@ static int __init locomo_init(void)
{
int ret = bus_register(&locomo_bus_type);
if (ret == 0)
driver_register(&locomo_device_driver);
platform_driver_register(&locomo_device_driver);
return ret;
}
static void __exit locomo_exit(void)
{
driver_unregister(&locomo_device_driver);
platform_driver_unregister(&locomo_device_driver);
bus_unregister(&locomo_bus_type);
}

56
arch/arm/common/sa1111.c
View File

@ -32,6 +32,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/sizes.h>
#include <asm/hardware/sa1111.h>
@ -132,6 +133,17 @@ static struct sa1111_dev_info sa1111_devices[] = {
},
};
void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes)
{
unsigned int sz = SZ_1M >> PAGE_SHIFT;
if (node != 0)
sz = 0;
size[1] = size[0] - sz;
size[0] = sz;
}
/*
* SA1111 interrupt support. Since clearing an IRQ while there are
* active IRQs causes the interrupt output to pulse, the upper levels
@ -801,9 +813,9 @@ struct sa1111_save_data {
#ifdef CONFIG_PM
static int sa1111_suspend(struct device *dev, pm_message_t state)
static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111 *sachip = platform_get_drvdata(dev);
struct sa1111_save_data *save;
unsigned long flags;
unsigned int val;
@ -812,7 +824,7 @@ static int sa1111_suspend(struct device *dev, pm_message_t state)
save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
if (!save)
return -ENOMEM;
dev->power.saved_state = save;
dev->dev.power.saved_state = save;
spin_lock_irqsave(&sachip->lock, flags);
@ -859,14 +871,14 @@ static int sa1111_suspend(struct device *dev, pm_message_t state)
* restored by their respective drivers, and must be called
* via LDM after this function.
*/
static int sa1111_resume(struct device *dev)
static int sa1111_resume(struct platform_device *dev)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111 *sachip = platform_get_drvdata(dev);
struct sa1111_save_data *save;
unsigned long flags, id;
void __iomem *base;
save = (struct sa1111_save_data *)dev->power.saved_state;
save = (struct sa1111_save_data *)dev->dev.power.saved_state;
if (!save)
return 0;
@ -879,7 +891,7 @@ static int sa1111_resume(struct device *dev)
id = sa1111_readl(sachip->base + SA1111_SKID);
if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
__sa1111_remove(sachip);
dev_set_drvdata(dev, NULL);
platform_set_drvdata(dev, NULL);
kfree(save);
return 0;
}
@ -911,7 +923,7 @@ static int sa1111_resume(struct device *dev)
spin_unlock_irqrestore(&sachip->lock, flags);
dev->power.saved_state = NULL;
dev->dev.power.saved_state = NULL;
kfree(save);
return 0;
@ -922,9 +934,8 @@ static int sa1111_resume(struct device *dev)
#define sa1111_resume NULL
#endif
static int sa1111_probe(struct device *dev)
static int sa1111_probe(struct platform_device *pdev)
{
struct platform_device *pdev = to_platform_device(dev);
struct resource *mem;
int irq;
@ -933,20 +944,20 @@ static int sa1111_probe(struct device *dev)
return -EINVAL;
irq = platform_get_irq(pdev, 0);
return __sa1111_probe(dev, mem, irq);
return __sa1111_probe(&pdev->dev, mem, irq);
}
static int sa1111_remove(struct device *dev)
static int sa1111_remove(struct platform_device *pdev)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111 *sachip = platform_get_drvdata(pdev);
if (sachip) {
__sa1111_remove(sachip);
dev_set_drvdata(dev, NULL);
platform_set_drvdata(pdev, NULL);
#ifdef CONFIG_PM
kfree(dev->power.saved_state);
dev->power.saved_state = NULL;
kfree(pdev->dev.power.saved_state);
pdev->dev.power.saved_state = NULL;
#endif
}
@ -962,13 +973,14 @@ static int sa1111_remove(struct device *dev)
* We also need to handle the SDRAM configuration for
* PXA250/SA1110 machine classes.
*/
static struct device_driver sa1111_device_driver = {
.name = "sa1111",
.bus = &platform_bus_type,
static struct platform_driver sa1111_device_driver = {
.probe = sa1111_probe,
.remove = sa1111_remove,
.suspend = sa1111_suspend,
.resume = sa1111_resume,
.driver = {
.name = "sa1111",
},
};
/*
@ -1256,17 +1268,17 @@ static int __init sa1111_init(void)
{
int ret = bus_register(&sa1111_bus_type);
if (ret == 0)
driver_register(&sa1111_device_driver);
platform_driver_register(&sa1111_device_driver);
return ret;
}
static void __exit sa1111_exit(void)
{
driver_unregister(&sa1111_device_driver);
platform_driver_unregister(&sa1111_device_driver);
bus_unregister(&sa1111_bus_type);
}
module_init(sa1111_init);
subsys_initcall(sa1111_init);
module_exit(sa1111_exit);
MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");

32
arch/arm/common/scoop.c
View File

@ -98,9 +98,9 @@ static void check_scoop_reg(struct scoop_dev *sdev)
}
#ifdef CONFIG_PM
static int scoop_suspend(struct device *dev, pm_message_t state)
static int scoop_suspend(struct platform_device *dev, pm_message_t state)
{
struct scoop_dev *sdev = dev_get_drvdata(dev);
struct scoop_dev *sdev = platform_get_drvdata(dev);
check_scoop_reg(sdev);
sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
@ -109,9 +109,9 @@ static int scoop_suspend(struct device *dev, pm_message_t state)
return 0;
}
static int scoop_resume(struct device *dev)
static int scoop_resume(struct platform_device *dev)
{
struct scoop_dev *sdev = dev_get_drvdata(dev);
struct scoop_dev *sdev = platform_get_drvdata(dev);
check_scoop_reg(sdev);
SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
@ -123,11 +123,10 @@ static int scoop_resume(struct device *dev)
#define scoop_resume NULL
#endif
int __init scoop_probe(struct device *dev)
int __init scoop_probe(struct platform_device *pdev)
{
struct scoop_dev *devptr;
struct scoop_config *inf;
struct platform_device *pdev = to_platform_device(dev);
struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem)
@ -141,7 +140,7 @@ int __init scoop_probe(struct device *dev)
memset(devptr, 0, sizeof(struct scoop_dev));
spin_lock_init(&devptr->scoop_lock);
inf = dev->platform_data;
inf = pdev->dev.platform_data;
devptr->base = ioremap(mem->start, mem->end - mem->start + 1);
if (!devptr->base) {
@ -149,12 +148,12 @@ int __init scoop_probe(struct device *dev)
return -ENOMEM;
}
dev_set_drvdata(dev, devptr);
platform_set_drvdata(pdev, devptr);
printk("Sharp Scoop Device found at 0x%08x -> 0x%08x\n",(unsigned int)mem->start,(unsigned int)devptr->base);
SCOOP_REG(devptr->base, SCOOP_MCR) = 0x0140;
reset_scoop(dev);
reset_scoop(&pdev->dev);
SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff;
SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff;
@ -164,29 +163,30 @@ int __init scoop_probe(struct device *dev)
return 0;
}
static int scoop_remove(struct device *dev)
static int scoop_remove(struct platform_device *pdev)
{
struct scoop_dev *sdev = dev_get_drvdata(dev);
struct scoop_dev *sdev = platform_get_drvdata(pdev);
if (sdev) {
iounmap(sdev->base);
kfree(sdev);
dev_set_drvdata(dev, NULL);
platform_set_drvdata(pdev, NULL);
}
return 0;
}
static struct device_driver scoop_driver = {
.name = "sharp-scoop",
.bus = &platform_bus_type,
static struct platform_driver scoop_driver = {
.probe = scoop_probe,
.remove = scoop_remove,
.suspend = scoop_suspend,
.resume = scoop_resume,
.driver = {
.name = "sharp-scoop",
},
};
int __init scoop_init(void)
{
return driver_register(&scoop_driver);
return platform_driver_register(&scoop_driver);
}
subsys_initcall(scoop_init);

85
arch/arm/configs/corgi_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc3
# Sun Oct 9 15:46:42 2005
# Linux kernel version: 2.6.15-rc2
# Mon Nov 28 10:30:09 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -63,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
@ -85,6 +102,7 @@ CONFIG_ARCH_PXA=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@ -98,12 +116,14 @@ CONFIG_ARCH_PXA=y
CONFIG_PXA_SHARPSL=y
CONFIG_PXA_SHARPSL_25x=y
# CONFIG_PXA_SHARPSL_27x is not set
# CONFIG_MACH_POODLE is not set
CONFIG_MACH_POODLE=y
CONFIG_MACH_CORGI=y
CONFIG_MACH_SHEPHERD=y
CONFIG_MACH_HUSKY=y
CONFIG_MACH_TOSA=y
CONFIG_PXA25x=y
CONFIG_PXA_SHARP_C7xx=y
CONFIG_PXA_SSP=y
#
# Processor Type
@ -155,6 +175,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@ -235,6 +256,10 @@ CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
#
@ -356,6 +381,10 @@ CONFIG_IP6_NF_RAW=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@ -413,6 +442,7 @@ CONFIG_IRCOMM=m
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VIA_FIR is not set
CONFIG_PXA_FICP=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@ -431,7 +461,6 @@ CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
@ -458,6 +487,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
@ -477,6 +511,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@ -531,6 +566,11 @@ CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_SHARPSL=y
# CONFIG_MTD_NAND_NANDSIM is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
@ -551,14 +591,6 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@ -625,6 +657,7 @@ CONFIG_SCSI_MULTI_LUN=y
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
@ -748,6 +781,7 @@ CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
@ -850,11 +884,15 @@ CONFIG_UNIX98_PTYS=y
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
@ -889,6 +927,7 @@ CONFIG_I2C_PXA=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -957,7 +996,10 @@ CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_VIDEO_AUDIO_DECODER is not set
# CONFIG_VIDEO_DECODER is not set
#
# Radio Adapters
@ -976,13 +1018,12 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_PXA is not set
CONFIG_FB_W100=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@ -991,6 +1032,7 @@ CONFIG_FB_W100=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@ -1087,15 +1129,15 @@ CONFIG_USB_SL811_CS=m
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@ -1107,7 +1149,6 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
@ -1185,6 +1226,7 @@ CONFIG_USB_MON=y
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@ -1340,6 +1382,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@ -1466,7 +1509,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y

95
arch/arm/configs/enp2611_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Wed Sep 14 10:51:52 2005
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:12:48 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@ -124,7 +144,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@ -144,6 +163,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@ -162,6 +183,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
@ -205,13 +227,18 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
@ -228,6 +255,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@ -238,6 +269,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
@ -273,6 +305,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@ -307,7 +340,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
@ -333,6 +365,11 @@ CONFIG_MTD_IXP2000=y
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
@ -358,21 +395,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@ -409,6 +438,11 @@ CONFIG_DUMMY=y
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
@ -416,6 +450,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
@ -455,6 +490,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@ -464,6 +500,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@ -609,6 +646,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
@ -634,7 +672,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@ -649,7 +686,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
@ -662,6 +698,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -671,6 +708,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@ -701,6 +739,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@ -710,6 +749,10 @@ CONFIG_HWMON=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
@ -737,6 +780,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
@ -765,10 +812,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@ -777,6 +820,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@ -796,11 +840,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@ -816,6 +859,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@ -848,6 +892,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
@ -886,6 +931,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@ -894,7 +940,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
@ -920,6 +968,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y

95
arch/arm/configs/ixdp2400_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Wed Sep 14 10:52:01 2005
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:14:13 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
@ -206,13 +228,18 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@ -410,6 +439,11 @@ CONFIG_DUMMY=y
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
@ -417,6 +451,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
@ -456,6 +491,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@ -465,6 +501,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@ -702,6 +740,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@ -711,6 +750,10 @@ CONFIG_HWMON=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
@ -738,6 +781,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@ -778,6 +821,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@ -817,6 +860,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@ -849,6 +893,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y

95
arch/arm/configs/ixdp2401_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Wed Sep 14 10:52:10 2005
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:14:50 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
@ -206,13 +228,18 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@ -410,6 +439,11 @@ CONFIG_DUMMY=y
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
@ -417,6 +451,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
@ -457,6 +492,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@ -466,6 +502,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@ -703,6 +741,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@ -712,6 +751,10 @@ CONFIG_HWMON=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@ -779,6 +822,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@ -818,6 +861,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@ -850,6 +894,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y

95
arch/arm/configs/ixdp2800_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Wed Sep 14 10:52:23 2005
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:14:56 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0"
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
@ -206,13 +228,18 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@ -410,6 +439,11 @@ CONFIG_DUMMY=y
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
@ -417,6 +451,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
@ -456,6 +491,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@ -465,6 +501,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@ -702,6 +740,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@ -711,6 +750,10 @@ CONFIG_HWMON=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
@ -738,6 +781,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@ -778,6 +821,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@ -817,6 +860,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@ -849,6 +893,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y

95
arch/arm/configs/ixdp2801_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Wed Sep 14 10:52:16 2005
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:15:03 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
@ -206,13 +228,18 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@ -410,6 +439,11 @@ CONFIG_DUMMY=y
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
@ -417,6 +451,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
@ -457,6 +492,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@ -466,6 +502,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@ -703,6 +741,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@ -712,6 +751,10 @@ CONFIG_HWMON=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@ -779,6 +822,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@ -818,6 +861,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@ -850,6 +894,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y

97
arch/arm/configs/omap_h2_1610_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Mon Sep 5 18:07:12 2005
# Linux kernel version: 2.6.14
# Wed Nov 9 18:53:40 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -22,6 +22,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@ -59,6 +61,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
@ -81,6 +100,7 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_LH7A40X is not set
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@ -112,7 +132,7 @@ CONFIG_OMAP_SERIAL_WAKE=y
# OMAP Core Type
#
# CONFIG_ARCH_OMAP730 is not set
# CONFIG_ARCH_OMAP1510 is not set
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
#
@ -177,6 +197,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
@ -258,13 +280,18 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
@ -281,6 +308,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@ -291,6 +322,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
@ -328,21 +360,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@ -369,10 +393,12 @@ CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
@ -403,6 +429,11 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
@ -439,6 +470,7 @@ CONFIG_PPP=y
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
@ -541,24 +573,28 @@ CONFIG_WATCHDOG_NOWAYOUT=y
#
# TPM devices
#
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set
CONFIG_ISP1301_OMAP=y
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
@ -576,7 +612,6 @@ CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_SOFT_CURSOR is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
@ -589,6 +624,7 @@ CONFIG_FB_MODE_HELPERS=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@ -600,6 +636,7 @@ CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_RL is not set
#
# Logo configuration
@ -624,10 +661,10 @@ CONFIG_SOUND=y
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_OBSOLETE_OSS_DRIVER is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_AD1980 is not set
#
# USB support
@ -636,23 +673,22 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
CONFIG_USB_GADGET_OMAP=y
CONFIG_USB_OMAP=y
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
@ -673,10 +709,6 @@ CONFIG_EXT2_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
@ -685,6 +717,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@ -706,10 +739,10 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@ -750,6 +783,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
@ -859,6 +893,7 @@ CONFIG_CRYPTO_DES=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y

1015
arch/arm/configs/poodle_defconfig
View File

File diff suppressed because it is too large Load Diff

119
arch/arm/configs/s3c2410_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-git8
# Thu Sep 8 19:24:02 2005
# Linux kernel version: 2.6.15-rc1
# Sun Nov 13 17:41:24 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -61,6 +61,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
@ -83,6 +100,7 @@ CONFIG_ARCH_S3C2410=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@ -108,6 +126,7 @@ CONFIG_CPU_S3C2440=y
# S3C2410 Boot
#
# CONFIG_S3C2410_BOOT_WATCHDOG is not set
# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
#
# S3C2410 Setup
@ -142,6 +161,7 @@ CONFIG_CPU_TLB_V4WBI=y
#
# Bus support
#
CONFIG_ISA=y
CONFIG_ISA_DMA_API=y
#
@ -152,7 +172,6 @@ CONFIG_ISA_DMA_API=y
#
# Kernel Features
#
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@ -163,6 +182,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@ -253,6 +273,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@ -260,7 +284,6 @@ CONFIG_TCP_CONG_BIC=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@ -300,6 +323,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@ -335,7 +359,6 @@ CONFIG_MTD_ROM=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_IMPA7 is not set
CONFIG_MTD_BAST=y
CONFIG_MTD_BAST_MAXSIZE=4
@ -369,6 +392,11 @@ CONFIG_MTD_NAND_S3C2410=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
@ -381,10 +409,12 @@ CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
@ -395,14 +425,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
@ -428,6 +450,7 @@ CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDE_BAST=y
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
@ -466,6 +489,11 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
@ -475,9 +503,19 @@ CONFIG_NETDEVICES=y
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=m
CONFIG_DM9000=y
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
@ -490,6 +528,7 @@ CONFIG_DM9000=m
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
@ -542,6 +581,9 @@ CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
@ -568,6 +610,7 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
@ -590,6 +633,10 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_HUB6 is not set
#
# Non-8250 serial port support
@ -622,6 +669,13 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_S3C2410_WATCHDOG=y
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_S3C2410_RTC=y
@ -636,6 +690,7 @@ CONFIG_S3C2410_RTC=y
#
# TPM devices
#
# CONFIG_TELCLOCK is not set
#
# I2C support
@ -653,6 +708,7 @@ CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ELEKTOR is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@ -671,6 +727,7 @@ CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -737,22 +794,28 @@ CONFIG_SENSORS_LM85=m
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_SOFT_CURSOR is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_S3C2410=y
# CONFIG_FB_S3C2410_DEBUG is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
@ -772,6 +835,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
@ -798,10 +865,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
@ -810,6 +873,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@ -854,6 +918,7 @@ CONFIG_JFFS_FS_VERBOSE=0
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@ -884,6 +949,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
@ -959,7 +1025,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
@ -970,7 +1036,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
@ -998,6 +1066,7 @@ CONFIG_DEBUG_S3C2410_UART=0
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y

104
arch/arm/configs/spitz_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc3
# Sun Oct 9 17:11:19 2005
# Linux kernel version: 2.6.15-rc2
# Mon Nov 28 10:26:52 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -63,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
@ -85,6 +102,7 @@ CONFIG_ARCH_PXA=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@ -98,10 +116,13 @@ CONFIG_ARCH_PXA=y
CONFIG_PXA_SHARPSL=y
# CONFIG_PXA_SHARPSL_25x is not set
CONFIG_PXA_SHARPSL_27x=y
CONFIG_MACH_AKITA=y
CONFIG_MACH_SPITZ=y
CONFIG_MACH_BORZOI=y
CONFIG_PXA27x=y
CONFIG_IWMMXT=y
CONFIG_PXA_SHARP_Cxx00=y
CONFIG_PXA_SSP=y
#
# Processor Type
@ -153,6 +174,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@ -233,6 +255,10 @@ CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
#
@ -354,6 +380,10 @@ CONFIG_IP6_NF_RAW=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@ -411,6 +441,7 @@ CONFIG_IRCOMM=m
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VIA_FIR is not set
CONFIG_PXA_FICP=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@ -429,7 +460,6 @@ CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
@ -456,6 +486,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
@ -475,6 +510,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@ -529,6 +565,11 @@ CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_SHARPSL=y
# CONFIG_MTD_NAND_NANDSIM is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
@ -549,14 +590,6 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@ -623,6 +656,7 @@ CONFIG_SCSI_MULTI_LUN=y
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
@ -746,6 +780,7 @@ CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
@ -771,6 +806,7 @@ CONFIG_INPUT=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_POWER is not set
#
# Input Device Drivers
@ -848,16 +884,37 @@ CONFIG_UNIX98_PTYS=y
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Monitoring support
@ -891,14 +948,13 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_PXA=y
# CONFIG_FB_W100 is not set
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
#
@ -907,6 +963,7 @@ CONFIG_FB_PXA=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@ -965,15 +1022,15 @@ CONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#
#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@ -985,7 +1042,6 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
@ -1058,6 +1114,7 @@ CONFIG_USB_MON=y
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@ -1218,6 +1275,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@ -1344,7 +1402,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y

1
arch/arm/kernel/apm.c
View File

@ -20,6 +20,7 @@
#include <linux/apm_bios.h>
#include <linux/sched.h>
#include <linux/pm.h>
#include <linux/pm_legacy.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/list.h>

1
arch/arm/kernel/armksyms.c
View File

@ -120,7 +120,6 @@ EXPORT_SYMBOL(__arch_strncpy_from_user);
EXPORT_SYMBOL(__get_user_1);
EXPORT_SYMBOL(__get_user_2);
EXPORT_SYMBOL(__get_user_4);
EXPORT_SYMBOL(__get_user_8);
EXPORT_SYMBOL(__put_user_1);
EXPORT_SYMBOL(__put_user_2);

8
arch/arm/kernel/calls.S
View File

@ -131,7 +131,7 @@ __syscall_start:
.long sys_wait4
/* 115 */ .long sys_swapoff
.long sys_sysinfo
.long sys_ipc_wrapper
.long sys_ipc
.long sys_fsync
.long sys_sigreturn_wrapper
/* 120 */ .long sys_clone_wrapper
@ -254,7 +254,7 @@ __syscall_start:
.long sys_fremovexattr
.long sys_tkill
.long sys_sendfile64
/* 240 */ .long sys_futex_wrapper
/* 240 */ .long sys_futex
.long sys_sched_setaffinity
.long sys_sched_getaffinity
.long sys_io_setup
@ -284,7 +284,7 @@ __syscall_start:
.long sys_fstatfs64
.long sys_tgkill
.long sys_utimes
/* 270 */ .long sys_arm_fadvise64_64_wrapper
/* 270 */ .long sys_arm_fadvise64_64
.long sys_pciconfig_iobase
.long sys_pciconfig_read
.long sys_pciconfig_write
@ -333,7 +333,7 @@ __syscall_start:
.long sys_inotify_init
.long sys_inotify_add_watch
.long sys_inotify_rm_watch
.long sys_mbind_wrapper
.long sys_mbind
/* 320 */ .long sys_get_mempolicy
.long sys_set_mempolicy
__syscall_end:

49
arch/arm/kernel/entry-armv.S
View File

@ -611,6 +611,47 @@ ENTRY(__switch_to)
.globl __kuser_helper_start
__kuser_helper_start:
/*
* Reference prototype:
*
* void __kernel_memory_barrier(void)
*
* Input:
*
* lr = return address
*
* Output:
*
* none
*
* Clobbered:
*
* the Z flag might be lost
*
* Definition and user space usage example:
*
* typedef void (__kernel_dmb_t)(void);
* #define __kernel_dmb (*(__kernel_dmb_t *)0xffff0fa0)
*
* Apply any needed memory barrier to preserve consistency with data modified
* manually and __kuser_cmpxchg usage.
*
* This could be used as follows:
*
* #define __kernel_dmb() \
* asm volatile ( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #95" \
* : : : "lr","cc" )
*/
__kuser_memory_barrier: @ 0xffff0fa0
#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
mov pc, lr
.align 5
/*
* Reference prototype:
*
@ -642,6 +683,8 @@ __kuser_helper_start:
* The C flag is also set if *ptr was changed to allow for assembly
* optimization in the calling code.
*
* Note: this routine already includes memory barriers as needed.
*
* For example, a user space atomic_add implementation could look like this:
*
* #define atomic_add(ptr, val) \
@ -698,10 +741,16 @@ __kuser_cmpxchg: @ 0xffff0fc0
#else
#ifdef CONFIG_SMP
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
ldrex r3, [r2]
subs r3, r3, r0
strexeq r3, r1, [r2]
rsbs r0, r3, #0
#ifdef CONFIG_SMP
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
mov pc, lr
#endif

23
arch/arm/kernel/entry-common.S
View File

@ -48,8 +48,7 @@ work_pending:
mov r0, sp @ 'regs'
mov r2, why @ 'syscall'
bl do_notify_resume
disable_irq @ disable interrupts
b no_work_pending
b ret_slow_syscall @ Check work again
work_resched:
bl schedule
@ -146,7 +145,7 @@ ENTRY(vector_swi)
#endif
enable_irq
str r4, [sp, #-S_OFF]! @ push fifth arg
stmdb sp!, {r4, r5} @ push fifth and sixth args
get_thread_info tsk
ldr ip, [tsk, #TI_FLAGS] @ check for syscall tracing
@ -205,7 +204,7 @@ ENTRY(sys_call_table)
* Special system call wrappers
*/
@ r0 = syscall number
@ r5 = syscall table
@ r8 = syscall table
.type sys_syscall, #function
sys_syscall:
eor scno, r0, #__NR_SYSCALL_BASE
@ -256,22 +255,6 @@ sys_sigaltstack_wrapper:
ldr r2, [sp, #S_OFF + S_SP]
b do_sigaltstack
sys_futex_wrapper:
str r5, [sp, #4] @ push sixth arg
b sys_futex
sys_arm_fadvise64_64_wrapper:
str r5, [sp, #4] @ push r5 to stack
b sys_arm_fadvise64_64
sys_mbind_wrapper:
str r5, [sp, #4]
b sys_mbind
sys_ipc_wrapper:
str r5, [sp, #4] @ push sixth arg
b sys_ipc
/*
* Note: off_4k (r5) is always units of 4K. If we can't do the requested
* offset, we return EINVAL.

11
arch/arm/kernel/head.S
View File

@ -17,7 +17,6 @@
#include <asm/assembler.h>
#include <asm/domain.h>
#include <asm/mach-types.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
@ -83,7 +82,7 @@ ENTRY(stext)
@ and irqs disabled
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
beq __error_p @ yes, error 'p'
beq __error_p @ yes, error 'p'
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
beq __error_a @ yes, error 'a'
@ -343,16 +342,12 @@ __create_page_tables:
bne 1b
#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
/*
* If we're using the NetWinder, we need to map in
* the 16550-type serial port for the debug messages
* If we're using the NetWinder or CATS, we also need to map
* in the 16550-type serial port for the debug messages
*/
teq r1, #MACH_TYPE_NETWINDER
teqne r1, #MACH_TYPE_CATS
bne 1f
add r0, r4, #0xff000000 >> 18
orr r3, r7, #0x7c000000
str r3, [r0]
1:
#endif
#ifdef CONFIG_ARCH_RPC
/*

2
arch/arm/kernel/module.c
View File

@ -101,6 +101,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
break;
case R_ARM_PC24:
case R_ARM_CALL:
case R_ARM_JUMP24:
offset = (*(u32 *)loc & 0x00ffffff) << 2;
if (offset & 0x02000000)
offset -= 0x04000000;

9
arch/arm/kernel/ptrace.c
View File

@ -242,6 +242,15 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in
*/
long aluop1, aluop2, ccbit;
if ((insn & 0x0fffffd0) == 0x012fff10) {
/*
* bx or blx
*/
alt = get_user_reg(child, insn & 15);
break;
}
if ((insn & 0xf000) != 0xf000)
break;

25
arch/arm/kernel/signal.c
View File

@ -595,23 +595,22 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
*/
ret |= !valid_user_regs(regs);
/*
* Block the signal if we were unsuccessful.
*/
if (ret != 0) {
spin_lock_irq(&tsk->sighand->siglock);
sigorsets(&tsk->blocked, &tsk->blocked,
&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&tsk->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&tsk->sighand->siglock);
force_sigsegv(sig, tsk);
return;
}
if (ret == 0)
return;
/*
* Block the signal if we were successful.
*/
spin_lock_irq(&tsk->sighand->siglock);
sigorsets(&tsk->blocked, &tsk->blocked,
&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&tsk->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&tsk->sighand->siglock);
force_sigsegv(sig, tsk);
}
/*

4
arch/arm/kernel/smp.c
View File

@ -256,9 +256,7 @@ void __cpuexit cpu_die(void)
asmlinkage void __cpuinit secondary_start_kernel(void)
{
struct mm_struct *mm = &init_mm;
unsigned int cpu;
cpu = smp_processor_id();
unsigned int cpu = smp_processor_id();
printk("CPU%u: Booted secondary processor\n", cpu);

6
arch/arm/kernel/vmlinux.lds.S
View File

@ -172,6 +172,10 @@ SECTIONS
.comment 0 : { *(.comment) }
}
/* those must never be empty */
/*
* These must never be empty
* If you have to comment these two assert statements out, your
* binutils is too old (for other reasons as well)
*/
ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")

32
arch/arm/lib/csumpartial.S
View File

@ -26,7 +26,7 @@ td1 .req r4 @ save before use
td2 .req r5 @ save before use
td3 .req lr
.zero: mov r0, sum
.Lzero: mov r0, sum
add sp, sp, #4
ldr pc, [sp], #4
@ -34,21 +34,22 @@ td3 .req lr
* Handle 0 to 7 bytes, with any alignment of source and
* destination pointers. Note that when we get here, C = 0
*/
.less8: teq len, #0 @ check for zero count
beq .zero
.Lless8: teq len, #0 @ check for zero count
beq .Lzero
/* we must have at least one byte. */
tst buf, #1 @ odd address?
movne sum, sum, ror #8
ldrneb td0, [buf], #1
subne len, len, #1
adcnes sum, sum, td0, put_byte_1
.less4: tst len, #6
beq .less8_byte
.Lless4: tst len, #6
beq .Lless8_byte
/* we are now half-word aligned */
.less8_wordlp:
.Lless8_wordlp:
#if __LINUX_ARM_ARCH__ >= 4
ldrh td0, [buf], #2
sub len, len, #2
@ -64,19 +65,19 @@ td3 .req lr
#endif
adcs sum, sum, td0
tst len, #6
bne .less8_wordlp
bne .Lless8_wordlp
.less8_byte: tst len, #1 @ odd number of bytes
.Lless8_byte: tst len, #1 @ odd number of bytes
ldrneb td0, [buf], #1 @ include last byte
adcnes sum, sum, td0, put_byte_0 @ update checksum
.done: adc r0, sum, #0 @ collect up the last carry
.Ldone: adc r0, sum, #0 @ collect up the last carry
ldr td0, [sp], #4
tst td0, #1 @ check buffer alignment
movne r0, r0, ror #8 @ rotate checksum by 8 bits
ldr pc, [sp], #4 @ return
.not_aligned: tst buf, #1 @ odd address
.Lnot_aligned: tst buf, #1 @ odd address
ldrneb td0, [buf], #1 @ make even
subne len, len, #1
adcnes sum, sum, td0, put_byte_1 @ update checksum
@ -101,11 +102,14 @@ td3 .req lr
ENTRY(csum_partial)
stmfd sp!, {buf, lr}
cmp len, #8 @ Ensure that we have at least
blo .less8 @ 8 bytes to copy.
blo .Lless8 @ 8 bytes to copy.
tst buf, #1
movne sum, sum, ror #8
adds sum, sum, #0 @ C = 0
tst buf, #3 @ Test destination alignment
blne .not_aligned @ aligh destination, return here
blne .Lnot_aligned @ align destination, return here
1: bics ip, len, #31
beq 3f
@ -127,11 +131,11 @@ ENTRY(csum_partial)
ldmfd sp!, {r4 - r5}
3: tst len, #0x1c @ should not change C
beq .less4
beq .Lless4
4: ldr td0, [buf], #4
sub len, len, #4
adcs sum, sum, td0
tst len, #0x1c
bne 4b
b .less4
b .Lless4

70
arch/arm/lib/csumpartialcopygeneric.S
View File

@ -22,7 +22,7 @@ dst .req r1
len .req r2
sum .req r3
.zero: mov r0, sum
.Lzero: mov r0, sum
load_regs ea
/*
@ -31,8 +31,9 @@ sum .req r3
* the length. Note that the source pointer hasn't been
* aligned yet.
*/
.dst_unaligned: tst dst, #1
beq .dst_16bit
.Ldst_unaligned:
tst dst, #1
beq .Ldst_16bit
load1b ip
sub len, len, #1
@ -41,7 +42,7 @@ sum .req r3
tst dst, #2
moveq pc, lr @ dst is now 32bit aligned
.dst_16bit: load2b r8, ip
.Ldst_16bit: load2b r8, ip
sub len, len, #2
adcs sum, sum, r8, put_byte_0
strb r8, [dst], #1
@ -53,12 +54,12 @@ sum .req r3
* Handle 0 to 7 bytes, with any alignment of source and
* destination pointers. Note that when we get here, C = 0
*/
.less8: teq len, #0 @ check for zero count
beq .zero
.Lless8: teq len, #0 @ check for zero count
beq .Lzero
/* we must have at least one byte. */
tst dst, #1 @ dst 16-bit aligned
beq .less8_aligned
beq .Lless8_aligned
/* Align dst */
load1b ip
@ -66,7 +67,7 @@ sum .req r3
adcs sum, sum, ip, put_byte_1 @ update checksum
strb ip, [dst], #1
tst len, #6
beq .less8_byteonly
beq .Lless8_byteonly
1: load2b r8, ip
sub len, len, #2
@ -74,15 +75,16 @@ sum .req r3
strb r8, [dst], #1
adcs sum, sum, ip, put_byte_1
strb ip, [dst], #1
.less8_aligned: tst len, #6
.Lless8_aligned:
tst len, #6
bne 1b
.less8_byteonly:
.Lless8_byteonly:
tst len, #1
beq .done
beq .Ldone
load1b r8
adcs sum, sum, r8, put_byte_0 @ update checksum
strb r8, [dst], #1
b .done
b .Ldone
FN_ENTRY
mov ip, sp
@ -90,11 +92,11 @@ FN_ENTRY
sub fp, ip, #4
cmp len, #8 @ Ensure that we have at least
blo .less8 @ 8 bytes to copy.
blo .Lless8 @ 8 bytes to copy.
adds sum, sum, #0 @ C = 0
tst dst, #3 @ Test destination alignment
blne .dst_unaligned @ align destination, return here
blne .Ldst_unaligned @ align destination, return here
/*
* Ok, the dst pointer is now 32bit aligned, and we know
@ -103,7 +105,7 @@ FN_ENTRY
*/
tst src, #3 @ Test source alignment
bne .src_not_aligned
bne .Lsrc_not_aligned
/* Routine for src & dst aligned */
@ -136,17 +138,17 @@ FN_ENTRY
adcs sum, sum, r4
4: ands len, len, #3
beq .done
beq .Ldone
load1l r4
tst len, #2
mov r5, r4, get_byte_0
beq .exit
beq .Lexit
adcs sum, sum, r4, push #16
strb r5, [dst], #1
mov r5, r4, get_byte_1
strb r5, [dst], #1
mov r5, r4, get_byte_2
.exit: tst len, #1
.Lexit: tst len, #1
strneb r5, [dst], #1
andne r5, r5, #255
adcnes sum, sum, r5, put_byte_0
@ -157,20 +159,20 @@ FN_ENTRY
* the inefficient byte manipulations in the
* architecture independent code.
*/
.done: adc r0, sum, #0
.Ldone: adc r0, sum, #0
ldr sum, [sp, #0] @ dst
tst sum, #1
movne r0, r0, ror #8
load_regs ea
.src_not_aligned:
.Lsrc_not_aligned:
adc sum, sum, #0 @ include C from dst alignment
and ip, src, #3
bic src, src, #3
load1l r5
cmp ip, #2
beq .src2_aligned
bhi .src3_aligned
beq .Lsrc2_aligned
bhi .Lsrc3_aligned
mov r4, r5, pull #8 @ C = 0
bics ip, len, #15
beq 2f
@ -211,18 +213,18 @@ FN_ENTRY
adcs sum, sum, r4
mov r4, r5, pull #8
4: ands len, len, #3
beq .done
beq .Ldone
mov r5, r4, get_byte_0
tst len, #2
beq .exit
beq .Lexit
adcs sum, sum, r4, push #16
strb r5, [dst], #1
mov r5, r4, get_byte_1
strb r5, [dst], #1
mov r5, r4, get_byte_2
b .exit
b .Lexit
.src2_aligned: mov r4, r5, pull #16
.Lsrc2_aligned: mov r4, r5, pull #16
adds sum, sum, #0
bics ip, len, #15
beq 2f
@ -263,20 +265,20 @@ FN_ENTRY
adcs sum, sum, r4
mov r4, r5, pull #16
4: ands len, len, #3
beq .done
beq .Ldone
mov r5, r4, get_byte_0
tst len, #2
beq .exit
beq .Lexit
adcs sum, sum, r4
strb r5, [dst], #1
mov r5, r4, get_byte_1
strb r5, [dst], #1
tst len, #1
beq .done
beq .Ldone
load1b r5
b .exit
b .Lexit
.src3_aligned: mov r4, r5, pull #24
.Lsrc3_aligned: mov r4, r5, pull #24
adds sum, sum, #0
bics ip, len, #15
beq 2f
@ -317,10 +319,10 @@ FN_ENTRY
adcs sum, sum, r4
mov r4, r5, pull #24
4: ands len, len, #3
beq .done
beq .Ldone
mov r5, r4, get_byte_0
tst len, #2
beq .exit
beq .Lexit
strb r5, [dst], #1
adcs sum, sum, r4
load1l r4
@ -328,4 +330,4 @@ FN_ENTRY
strb r5, [dst], #1
adcs sum, sum, r4, push #24
mov r5, r4, get_byte_1
b .exit
b .Lexit

4
arch/arm/lib/delay.S
View File

@ -11,7 +11,7 @@
#include <asm/assembler.h>
.text
LC0: .word loops_per_jiffy
.LC0: .word loops_per_jiffy
/*
* 0 <= r0 <= 2000
@ -21,7 +21,7 @@ ENTRY(__udelay)
orr r2, r2, #0x00db
mul r0, r2, r0
ENTRY(__const_udelay) @ 0 <= r0 <= 0x01ffffff
ldr r2, LC0
ldr r2, .LC0
ldr r2, [r2] @ max = 0x0fffffff
mov r0, r0, lsr #11 @ max = 0x00003fff
mov r2, r2, lsr #11 @ max = 0x0003ffff

18
arch/arm/lib/findbit.S
View File

@ -27,7 +27,7 @@ ENTRY(_find_first_zero_bit_le)
mov r2, #0
1: ldrb r3, [r0, r2, lsr #3]
eors r3, r3, #0xff @ invert bits
bne .found @ any now set - found zero bit
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
2: cmp r2, r1 @ any more?
blo 1b
@ -46,7 +46,7 @@ ENTRY(_find_next_zero_bit_le)
ldrb r3, [r0, r2, lsr #3]
eor r3, r3, #0xff @ now looking for a 1 bit
movs r3, r3, lsr ip @ shift off unused bits
bne .found
bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
@ -61,7 +61,7 @@ ENTRY(_find_first_bit_le)
mov r2, #0
1: ldrb r3, [r0, r2, lsr #3]
movs r3, r3
bne .found @ any now set - found zero bit
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
2: cmp r2, r1 @ any more?
blo 1b
@ -79,7 +79,7 @@ ENTRY(_find_next_bit_le)
beq 1b @ If new byte, goto old routine
ldrb r3, [r0, r2, lsr #3]
movs r3, r3, lsr ip @ shift off unused bits
bne .found
bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
@ -93,7 +93,7 @@ ENTRY(_find_first_zero_bit_be)
1: eor r3, r2, #0x18 @ big endian byte ordering
ldrb r3, [r0, r3, lsr #3]
eors r3, r3, #0xff @ invert bits
bne .found @ any now set - found zero bit
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
2: cmp r2, r1 @ any more?
blo 1b
@ -109,7 +109,7 @@ ENTRY(_find_next_zero_bit_be)
ldrb r3, [r0, r3, lsr #3]
eor r3, r3, #0xff @ now looking for a 1 bit
movs r3, r3, lsr ip @ shift off unused bits
bne .found
bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
@ -121,7 +121,7 @@ ENTRY(_find_first_bit_be)
1: eor r3, r2, #0x18 @ big endian byte ordering
ldrb r3, [r0, r3, lsr #3]
movs r3, r3
bne .found @ any now set - found zero bit
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
2: cmp r2, r1 @ any more?
blo 1b
@ -136,7 +136,7 @@ ENTRY(_find_next_bit_be)
eor r3, r2, #0x18 @ big endian byte ordering
ldrb r3, [r0, r3, lsr #3]
movs r3, r3, lsr ip @ shift off unused bits
bne .found
bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
@ -146,7 +146,7 @@ ENTRY(_find_next_bit_be)
/*
* One or more bits in the LSB of r3 are assumed to be set.
*/
.found:
.L_found:
#if __LINUX_ARM_ARCH__ >= 5
rsb r1, r3, #0
and r3, r3, r1

11
arch/arm/lib/getuser.S
View File

@ -54,15 +54,6 @@ __get_user_4:
mov r0, #0
mov pc, lr
.global __get_user_8
__get_user_8:
5: ldrt r2, [r0], #4
6: ldrt r3, [r0]
mov r0, #0
mov pc, lr
__get_user_bad_8:
mov r3, #0
__get_user_bad:
mov r2, #0
mov r0, #-EFAULT
@ -73,6 +64,4 @@ __get_user_bad:
.long 2b, __get_user_bad
.long 3b, __get_user_bad
.long 4b, __get_user_bad
.long 5b, __get_user_bad_8
.long 6b, __get_user_bad_8
.previous

4
arch/arm/lib/io-acorn.S
View File

@ -17,7 +17,7 @@
.text
.align
.iosl_warning:
.Liosl_warning:
.ascii "<4>insl/outsl not implemented, called from %08lX\0"
.align
@ -27,6 +27,6 @@
*/
ENTRY(insl)
ENTRY(outsl)
adr r0, .iosl_warning
adr r0, .Liosl_warning
mov r1, lr
b printk

24
arch/arm/lib/io-readsb.S
View File

@ -10,7 +10,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
.insb_align: rsb ip, ip, #4
.Linsb_align: rsb ip, ip, #4
cmp ip, r2
movgt ip, r2
cmp ip, #2
@ -21,20 +21,20 @@
ldrgtb r3, [r0]
strgtb r3, [r1], #1
subs r2, r2, ip
bne .insb_aligned
bne .Linsb_aligned
ENTRY(__raw_readsb)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
ands ip, r1, #3
bne .insb_align
bne .Linsb_align
.insb_aligned: stmfd sp!, {r4 - r6, lr}
.Linsb_aligned: stmfd sp!, {r4 - r6, lr}
subs r2, r2, #16
bmi .insb_no_16
bmi .Linsb_no_16
.insb_16_lp: ldrb r3, [r0]
.Linsb_16_lp: ldrb r3, [r0]
ldrb r4, [r0]
ldrb r5, [r0]
mov r3, r3, put_byte_0
@ -69,13 +69,13 @@ ENTRY(__raw_readsb)
stmia r1!, {r3 - r6}
subs r2, r2, #16
bpl .insb_16_lp
bpl .Linsb_16_lp
tst r2, #15
LOADREGS(eqfd, sp!, {r4 - r6, pc})
.insb_no_16: tst r2, #8
beq .insb_no_8
.Linsb_no_16: tst r2, #8
beq .Linsb_no_8
ldrb r3, [r0]
ldrb r4, [r0]
@ -95,8 +95,8 @@ ENTRY(__raw_readsb)
orr r4, r4, ip, put_byte_3
stmia r1!, {r3, r4}
.insb_no_8: tst r2, #4
beq .insb_no_4
.Linsb_no_8: tst r2, #4
beq .Linsb_no_4
ldrb r3, [r0]
ldrb r4, [r0]
@ -108,7 +108,7 @@ ENTRY(__raw_readsb)
orr r3, r3, r6, put_byte_3
str r3, [r1], #4
.insb_no_4: ands r2, r2, #3
.Linsb_no_4: ands r2, r2, #3
LOADREGS(eqfd, sp!, {r4 - r6, pc})
cmp r2, #2

30
arch/arm/lib/io-readsw-armv3.S
View File

@ -11,16 +11,16 @@
#include <asm/assembler.h>
#include <asm/hardware.h>
.insw_bad_alignment:
adr r0, .insw_bad_align_msg
.Linsw_bad_alignment:
adr r0, .Linsw_bad_align_msg
mov r2, lr
b panic
.insw_bad_align_msg:
.Linsw_bad_align_msg:
.asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
.align
.insw_align: tst r1, #1
bne .insw_bad_alignment
.Linsw_align: tst r1, #1
bne .Linsw_bad_alignment
ldr r3, [r0]
strb r3, [r1], #1
@ -34,16 +34,16 @@ ENTRY(__raw_readsw)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
tst r1, #3
bne .insw_align
bne .Linsw_align
.insw_aligned: mov ip, #0xff
.Linsw_aligned: mov ip, #0xff
orr ip, ip, ip, lsl #8
stmfd sp!, {r4, r5, r6, lr}
subs r2, r2, #8
bmi .no_insw_8
bmi .Lno_insw_8
.insw_8_lp: ldr r3, [r0]
.Linsw_8_lp: ldr r3, [r0]
and r3, r3, ip
ldr r4, [r0]
orr r3, r3, r4, lsl #16
@ -66,13 +66,13 @@ ENTRY(__raw_readsw)
stmia r1!, {r3 - r6}
subs r2, r2, #8
bpl .insw_8_lp
bpl .Linsw_8_lp
tst r2, #7
LOADREGS(eqfd, sp!, {r4, r5, r6, pc})
.no_insw_8: tst r2, #4
beq .no_insw_4
.Lno_insw_8: tst r2, #4
beq .Lno_insw_4
ldr r3, [r0]
and r3, r3, ip
@ -86,8 +86,8 @@ ENTRY(__raw_readsw)
stmia r1!, {r3, r4}
.no_insw_4: tst r2, #2
beq .no_insw_2
.Lno_insw_4: tst r2, #2
beq .Lno_insw_2
ldr r3, [r0]
and r3, r3, ip
@ -96,7 +96,7 @@ ENTRY(__raw_readsw)
str r3, [r1], #4
.no_insw_2: tst r2, #1
.Lno_insw_2: tst r2, #1
ldrne r3, [r0]
strneb r3, [r1], #1
movne r3, r3, lsr #8

24
arch/arm/lib/io-readsw-armv4.S
View File

@ -18,8 +18,8 @@
#endif
.endm
.insw_align: movs ip, r1, lsl #31
bne .insw_noalign
.Linsw_align: movs ip, r1, lsl #31
bne .Linsw_noalign
ldrh ip, [r0]
sub r2, r2, #1
strh ip, [r1], #2
@ -28,14 +28,14 @@ ENTRY(__raw_readsw)
teq r2, #0
moveq pc, lr
tst r1, #3
bne .insw_align
bne .Linsw_align
stmfd sp!, {r4, r5, lr}
subs r2, r2, #8
bmi .no_insw_8
bmi .Lno_insw_8
.insw_8_lp: ldrh r3, [r0]
.Linsw_8_lp: ldrh r3, [r0]
ldrh r4, [r0]
pack r3, r3, r4
@ -53,10 +53,10 @@ ENTRY(__raw_readsw)
subs r2, r2, #8
stmia r1!, {r3 - r5, ip}
bpl .insw_8_lp
bpl .Linsw_8_lp
.no_insw_8: tst r2, #4
beq .no_insw_4
.Lno_insw_8: tst r2, #4
beq .Lno_insw_4
ldrh r3, [r0]
ldrh r4, [r0]
@ -68,15 +68,15 @@ ENTRY(__raw_readsw)
stmia r1!, {r3, r4}
.no_insw_4: movs r2, r2, lsl #31
bcc .no_insw_2
.Lno_insw_4: movs r2, r2, lsl #31
bcc .Lno_insw_2
ldrh r3, [r0]
ldrh ip, [r0]
pack r3, r3, ip
str r3, [r1], #4
.no_insw_2: ldrneh r3, [r0]
.Lno_insw_2: ldrneh r3, [r0]
strneh r3, [r1]
ldmfd sp!, {r4, r5, pc}
@ -93,7 +93,7 @@ ENTRY(__raw_readsw)
#define pull_hbyte1 lsr #8
#endif
.insw_noalign: stmfd sp!, {r4, lr}
.Linsw_noalign: stmfd sp!, {r4, lr}
ldrccb ip, [r1, #-1]!
bcc 1f

25
arch/arm/lib/io-writesb.S
View File

@ -30,7 +30,7 @@
#endif
.endm
.outsb_align: rsb ip, ip, #4
.Loutsb_align: rsb ip, ip, #4
cmp ip, r2
movgt ip, r2
cmp ip, #2
@ -41,44 +41,45 @@
ldrgtb r3, [r1], #1
strgtb r3, [r0]
subs r2, r2, ip
bne .outsb_aligned
bne .Loutsb_aligned
ENTRY(__raw_writesb)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
ands ip, r1, #3
bne .outsb_align
bne .Loutsb_align
.outsb_aligned: stmfd sp!, {r4, r5, lr}
.Loutsb_aligned:
stmfd sp!, {r4, r5, lr}
subs r2, r2, #16
bmi .outsb_no_16
bmi .Loutsb_no_16
.outsb_16_lp: ldmia r1!, {r3, r4, r5, ip}
.Loutsb_16_lp: ldmia r1!, {r3, r4, r5, ip}
outword r3
outword r4
outword r5
outword ip
subs r2, r2, #16
bpl .outsb_16_lp
bpl .Loutsb_16_lp
tst r2, #15
LOADREGS(eqfd, sp!, {r4, r5, pc})
.outsb_no_16: tst r2, #8
beq .outsb_no_8
.Loutsb_no_16: tst r2, #8
beq .Loutsb_no_8
ldmia r1!, {r3, r4}
outword r3
outword r4
.outsb_no_8: tst r2, #4
beq .outsb_no_4
.Loutsb_no_8: tst r2, #4
beq .Loutsb_no_4
ldr r3, [r1], #4
outword r3
.outsb_no_4: ands r2, r2, #3
.Loutsb_no_4: ands r2, r2, #3
LOADREGS(eqfd, sp!, {r4, r5, pc})
cmp r2, #2

30
arch/arm/lib/io-writesw-armv3.S
View File

@ -11,16 +11,16 @@
#include <asm/assembler.h>
#include <asm/hardware.h>
.outsw_bad_alignment:
adr r0, .outsw_bad_align_msg
.Loutsw_bad_alignment:
adr r0, .Loutsw_bad_align_msg
mov r2, lr
b panic
.outsw_bad_align_msg:
.Loutsw_bad_align_msg:
.asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
.align
.outsw_align: tst r1, #1
bne .outsw_bad_alignment
.Loutsw_align: tst r1, #1
bne .Loutsw_bad_alignment
add r1, r1, #2
@ -35,14 +35,14 @@ ENTRY(__raw_writesw)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
tst r1, #3
bne .outsw_align
bne .Loutsw_align
.outsw_aligned: stmfd sp!, {r4, r5, r6, lr}
stmfd sp!, {r4, r5, r6, lr}
subs r2, r2, #8
bmi .no_outsw_8
bmi .Lno_outsw_8
.outsw_8_lp: ldmia r1!, {r3, r4, r5, r6}
.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6}
mov ip, r3, lsl #16
orr ip, ip, ip, lsr #16
@ -77,13 +77,13 @@ ENTRY(__raw_writesw)
str ip, [r0]
subs r2, r2, #8
bpl .outsw_8_lp
bpl .Loutsw_8_lp
tst r2, #7
LOADREGS(eqfd, sp!, {r4, r5, r6, pc})
.no_outsw_8: tst r2, #4
beq .no_outsw_4
.Lno_outsw_8: tst r2, #4
beq .Lno_outsw_4
ldmia r1!, {r3, r4}
@ -103,8 +103,8 @@ ENTRY(__raw_writesw)
orr ip, ip, ip, lsl #16
str ip, [r0]
.no_outsw_4: tst r2, #2
beq .no_outsw_2
.Lno_outsw_4: tst r2, #2
beq .Lno_outsw_2
ldr r3, [r1], #4
@ -116,7 +116,7 @@ ENTRY(__raw_writesw)
orr ip, ip, ip, lsl #16
str ip, [r0]
.no_outsw_2: tst r2, #1
.Lno_outsw_2: tst r2, #1
ldrne r3, [r1]

25
arch/arm/lib/io-writesw-armv4.S
View File

@ -22,8 +22,8 @@
#endif
.endm
.outsw_align: movs ip, r1, lsl #31
bne .outsw_noalign
.Loutsw_align: movs ip, r1, lsl #31
bne .Loutsw_noalign
ldrh r3, [r1], #2
sub r2, r2, #1
@ -33,35 +33,35 @@ ENTRY(__raw_writesw)
teq r2, #0
moveq pc, lr
ands r3, r1, #3
bne .outsw_align
bne .Loutsw_align
stmfd sp!, {r4, r5, lr}
subs r2, r2, #8
bmi .no_outsw_8
bmi .Lno_outsw_8
.outsw_8_lp: ldmia r1!, {r3, r4, r5, ip}
.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, ip}
subs r2, r2, #8
outword r3
outword r4
outword r5
outword ip
bpl .outsw_8_lp
bpl .Loutsw_8_lp
.no_outsw_8: tst r2, #4
beq .no_outsw_4
.Lno_outsw_8: tst r2, #4
beq .Lno_outsw_4
ldmia r1!, {r3, ip}
outword r3
outword ip
.no_outsw_4: movs r2, r2, lsl #31
bcc .no_outsw_2
.Lno_outsw_4: movs r2, r2, lsl #31
bcc .Lno_outsw_2
ldr r3, [r1], #4
outword r3
.no_outsw_2: ldrneh r3, [r1]
.Lno_outsw_2: ldrneh r3, [r1]
strneh r3, [r0]
ldmfd sp!, {r4, r5, pc}
@ -74,7 +74,8 @@ ENTRY(__raw_writesw)
#define push_hbyte1 lsl #8
#endif
.outsw_noalign: ldr r3, [r1, -r3]!
.Loutsw_noalign:
ldr r3, [r1, -r3]!
subcs r2, r2, #1
bcs 2f
subs r2, r2, #2

230
arch/arm/lib/uaccess.S
View File

@ -27,7 +27,7 @@
* Returns : Number of bytes NOT copied.
*/
.c2u_dest_not_aligned:
.Lc2u_dest_not_aligned:
rsb ip, ip, #4
cmp ip, #2
ldrb r3, [r1], #1
@ -37,32 +37,32 @@ USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #1
USER( strgtbt r3, [r0], #1) @ May fault
sub r2, r2, ip
b .c2u_dest_aligned
b .Lc2u_dest_aligned
ENTRY(__arch_copy_to_user)
stmfd sp!, {r2, r4 - r7, lr}
cmp r2, #4
blt .c2u_not_enough
blt .Lc2u_not_enough
ands ip, r0, #3
bne .c2u_dest_not_aligned
.c2u_dest_aligned:
bne .Lc2u_dest_not_aligned
.Lc2u_dest_aligned:
ands ip, r1, #3
bne .c2u_src_not_aligned
bne .Lc2u_src_not_aligned
/*
* Seeing as there has to be at least 8 bytes to copy, we can
* copy one word, and force a user-mode page fault...
*/
.c2u_0fupi: subs r2, r2, #4
.Lc2u_0fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .c2u_0nowords
bmi .Lc2u_0nowords
ldr r3, [r1], #4
USER( strt r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .c2u_0fupi
beq .Lc2u_0fupi
/*
* ip = max no. of bytes to copy before needing another "strt" insn
*/
@ -70,16 +70,16 @@ USER( strt r3, [r0], #4) @ May fault
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #32
blt .c2u_0rem8lp
blt .Lc2u_0rem8lp
.c2u_0cpy8lp: ldmia r1!, {r3 - r6}
.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6}
stmia r0!, {r3 - r6} @ Shouldnt fault
ldmia r1!, {r3 - r6}
subs ip, ip, #32
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_0cpy8lp
bpl .Lc2u_0cpy8lp
.c2u_0rem8lp: cmn ip, #16
.Lc2u_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6}
stmgeia r0!, {r3 - r6} @ Shouldnt fault
tst ip, #8
@ -89,33 +89,33 @@ USER( strt r3, [r0], #4) @ May fault
ldrne r3, [r1], #4
strnet r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .c2u_0fupi
.c2u_0nowords: teq ip, #0
beq .c2u_finished
.c2u_nowords: cmp ip, #2
beq .Lc2u_0fupi
.Lc2u_0nowords: teq ip, #0
beq .Lc2u_finished
.Lc2u_nowords: cmp ip, #2
ldrb r3, [r1], #1
USER( strbt r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #1
USER( strgtbt r3, [r0], #1) @ May fault
b .c2u_finished
b .Lc2u_finished
.c2u_not_enough:
.Lc2u_not_enough:
movs ip, r2
bne .c2u_nowords
.c2u_finished: mov r0, #0
bne .Lc2u_nowords
.Lc2u_finished: mov r0, #0
LOADREGS(fd,sp!,{r2, r4 - r7, pc})
.c2u_src_not_aligned:
.Lc2u_src_not_aligned:
bic r1, r1, #3
ldr r7, [r1], #4
cmp ip, #2
bgt .c2u_3fupi
beq .c2u_2fupi
.c2u_1fupi: subs r2, r2, #4
bgt .Lc2u_3fupi
beq .Lc2u_2fupi
.Lc2u_1fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .c2u_1nowords
bmi .Lc2u_1nowords
mov r3, r7, pull #8
ldr r7, [r1], #4
orr r3, r3, r7, push #24
@ -123,14 +123,14 @@ USER( strt r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .c2u_1fupi
beq .Lc2u_1fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_1rem8lp
blt .Lc2u_1rem8lp
.c2u_1cpy8lp: mov r3, r7, pull #8
.Lc2u_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #24
@ -141,9 +141,9 @@ USER( strt r3, [r0], #4) @ May fault
mov r6, r6, pull #8
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_1cpy8lp
bpl .Lc2u_1cpy8lp
.c2u_1rem8lp: tst ip, #8
.Lc2u_1rem8lp: tst ip, #8
movne r3, r7, pull #8
ldmneia r1!, {r4, r7}
orrne r3, r3, r4, push #24
@ -156,21 +156,21 @@ USER( strt r3, [r0], #4) @ May fault
orrne r3, r3, r7, push #24
strnet r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .c2u_1fupi
.c2u_1nowords: mov r3, r7, get_byte_1
beq .Lc2u_1fupi
.Lc2u_1nowords: mov r3, r7, get_byte_1
teq ip, #0
beq .c2u_finished
beq .Lc2u_finished
cmp ip, #2
USER( strbt r3, [r0], #1) @ May fault
movge r3, r7, get_byte_2
USER( strgebt r3, [r0], #1) @ May fault
movgt r3, r7, get_byte_3
USER( strgtbt r3, [r0], #1) @ May fault
b .c2u_finished
b .Lc2u_finished
.c2u_2fupi: subs r2, r2, #4
.Lc2u_2fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .c2u_2nowords
bmi .Lc2u_2nowords
mov r3, r7, pull #16
ldr r7, [r1], #4
orr r3, r3, r7, push #16
@ -178,14 +178,14 @@ USER( strt r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .c2u_2fupi
beq .Lc2u_2fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_2rem8lp
blt .Lc2u_2rem8lp
.c2u_2cpy8lp: mov r3, r7, pull #16
.Lc2u_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #16
@ -196,9 +196,9 @@ USER( strt r3, [r0], #4) @ May fault
mov r6, r6, pull #16
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_2cpy8lp
bpl .Lc2u_2cpy8lp
.c2u_2rem8lp: tst ip, #8
.Lc2u_2rem8lp: tst ip, #8
movne r3, r7, pull #16
ldmneia r1!, {r4, r7}
orrne r3, r3, r4, push #16
@ -211,21 +211,21 @@ USER( strt r3, [r0], #4) @ May fault
orrne r3, r3, r7, push #16
strnet r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .c2u_2fupi
.c2u_2nowords: mov r3, r7, get_byte_2
beq .Lc2u_2fupi
.Lc2u_2nowords: mov r3, r7, get_byte_2
teq ip, #0
beq .c2u_finished
beq .Lc2u_finished
cmp ip, #2
USER( strbt r3, [r0], #1) @ May fault
movge r3, r7, get_byte_3
USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
USER( strgtbt r3, [r0], #1) @ May fault
b .c2u_finished
b .Lc2u_finished
.c2u_3fupi: subs r2, r2, #4
.Lc2u_3fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .c2u_3nowords
bmi .Lc2u_3nowords
mov r3, r7, pull #24
ldr r7, [r1], #4
orr r3, r3, r7, push #8
@ -233,14 +233,14 @@ USER( strt r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .c2u_3fupi
beq .Lc2u_3fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_3rem8lp
blt .Lc2u_3rem8lp
.c2u_3cpy8lp: mov r3, r7, pull #24
.Lc2u_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #8
@ -251,9 +251,9 @@ USER( strt r3, [r0], #4) @ May fault
mov r6, r6, pull #24
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_3cpy8lp
bpl .Lc2u_3cpy8lp
.c2u_3rem8lp: tst ip, #8
.Lc2u_3rem8lp: tst ip, #8
movne r3, r7, pull #24
ldmneia r1!, {r4, r7}
orrne r3, r3, r4, push #8
@ -266,17 +266,17 @@ USER( strt r3, [r0], #4) @ May fault
orrne r3, r3, r7, push #8
strnet r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .c2u_3fupi
.c2u_3nowords: mov r3, r7, get_byte_3
beq .Lc2u_3fupi
.Lc2u_3nowords: mov r3, r7, get_byte_3
teq ip, #0
beq .c2u_finished
beq .Lc2u_finished
cmp ip, #2
USER( strbt r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
USER( strgtbt r3, [r0], #1) @ May fault
b .c2u_finished
b .Lc2u_finished
.section .fixup,"ax"
.align 0
@ -290,7 +290,7 @@ USER( strgtbt r3, [r0], #1) @ May fault
* : n - number of bytes to copy
* Returns : Number of bytes NOT copied.
*/
.cfu_dest_not_aligned:
.Lcfu_dest_not_aligned:
rsb ip, ip, #4
cmp ip, #2
USER( ldrbt r3, [r1], #1) @ May fault
@ -300,31 +300,32 @@ USER( ldrgebt r3, [r1], #1) @ May fault
USER( ldrgtbt r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
sub r2, r2, ip
b .cfu_dest_aligned
b .Lcfu_dest_aligned
ENTRY(__arch_copy_from_user)
stmfd sp!, {r0, r2, r4 - r7, lr}
cmp r2, #4
blt .cfu_not_enough
blt .Lcfu_not_enough
ands ip, r0, #3
bne .cfu_dest_not_aligned
.cfu_dest_aligned:
bne .Lcfu_dest_not_aligned
.Lcfu_dest_aligned:
ands ip, r1, #3
bne .cfu_src_not_aligned
bne .Lcfu_src_not_aligned
/*
* Seeing as there has to be at least 8 bytes to copy, we can
* copy one word, and force a user-mode page fault...
*/
.cfu_0fupi: subs r2, r2, #4
.Lcfu_0fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .cfu_0nowords
bmi .Lcfu_0nowords
USER( ldrt r3, [r1], #4)
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .cfu_0fupi
beq .Lcfu_0fupi
/*
* ip = max no. of bytes to copy before needing another "strt" insn
*/
@ -332,16 +333,16 @@ USER( ldrt r3, [r1], #4)
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #32
blt .cfu_0rem8lp
blt .Lcfu_0rem8lp
.cfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault
.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault
stmia r0!, {r3 - r6}
ldmia r1!, {r3 - r6} @ Shouldnt fault
subs ip, ip, #32
stmia r0!, {r3 - r6}
bpl .cfu_0cpy8lp
bpl .Lcfu_0cpy8lp
.cfu_0rem8lp: cmn ip, #16
.Lcfu_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6} @ Shouldnt fault
stmgeia r0!, {r3 - r6}
tst ip, #8
@ -351,34 +352,34 @@ USER( ldrt r3, [r1], #4)
ldrnet r3, [r1], #4 @ Shouldnt fault
strne r3, [r0], #4
ands ip, ip, #3
beq .cfu_0fupi
.cfu_0nowords: teq ip, #0
beq .cfu_finished
.cfu_nowords: cmp ip, #2
beq .Lcfu_0fupi
.Lcfu_0nowords: teq ip, #0
beq .Lcfu_finished
.Lcfu_nowords: cmp ip, #2
USER( ldrbt r3, [r1], #1) @ May fault
strb r3, [r0], #1
USER( ldrgebt r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
b .cfu_finished
b .Lcfu_finished
.cfu_not_enough:
.Lcfu_not_enough:
movs ip, r2
bne .cfu_nowords
.cfu_finished: mov r0, #0
bne .Lcfu_nowords
.Lcfu_finished: mov r0, #0
add sp, sp, #8
LOADREGS(fd,sp!,{r4 - r7, pc})
.cfu_src_not_aligned:
.Lcfu_src_not_aligned:
bic r1, r1, #3
USER( ldrt r7, [r1], #4) @ May fault
cmp ip, #2
bgt .cfu_3fupi
beq .cfu_2fupi
.cfu_1fupi: subs r2, r2, #4
bgt .Lcfu_3fupi
beq .Lcfu_2fupi
.Lcfu_1fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .cfu_1nowords
bmi .Lcfu_1nowords
mov r3, r7, pull #8
USER( ldrt r7, [r1], #4) @ May fault
orr r3, r3, r7, push #24
@ -386,14 +387,14 @@ USER( ldrt r7, [r1], #4) @ May fault
mov ip, r1, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .cfu_1fupi
beq .Lcfu_1fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_1rem8lp
blt .Lcfu_1rem8lp
.cfu_1cpy8lp: mov r3, r7, pull #8
.Lcfu_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #24
@ -404,9 +405,9 @@ USER( ldrt r7, [r1], #4) @ May fault
mov r6, r6, pull #8
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6}
bpl .cfu_1cpy8lp
bpl .Lcfu_1cpy8lp
.cfu_1rem8lp: tst ip, #8
.Lcfu_1rem8lp: tst ip, #8
movne r3, r7, pull #8
ldmneia r1!, {r4, r7} @ Shouldnt fault
orrne r3, r3, r4, push #24
@ -419,21 +420,21 @@ USER( ldrnet r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #24
strne r3, [r0], #4
ands ip, ip, #3
beq .cfu_1fupi
.cfu_1nowords: mov r3, r7, get_byte_1
beq .Lcfu_1fupi
.Lcfu_1nowords: mov r3, r7, get_byte_1
teq ip, #0
beq .cfu_finished
beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
movge r3, r7, get_byte_2
strgeb r3, [r0], #1
movgt r3, r7, get_byte_3
strgtb r3, [r0], #1
b .cfu_finished
b .Lcfu_finished
.cfu_2fupi: subs r2, r2, #4
.Lcfu_2fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .cfu_2nowords
bmi .Lcfu_2nowords
mov r3, r7, pull #16
USER( ldrt r7, [r1], #4) @ May fault
orr r3, r3, r7, push #16
@ -441,14 +442,15 @@ USER( ldrt r7, [r1], #4) @ May fault
mov ip, r1, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .cfu_2fupi
beq .Lcfu_2fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_2rem8lp
blt .Lcfu_2rem8lp
.cfu_2cpy8lp: mov r3, r7, pull #16
.Lcfu_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #16
@ -459,9 +461,9 @@ USER( ldrt r7, [r1], #4) @ May fault
mov r6, r6, pull #16
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6}
bpl .cfu_2cpy8lp
bpl .Lcfu_2cpy8lp
.cfu_2rem8lp: tst ip, #8
.Lcfu_2rem8lp: tst ip, #8
movne r3, r7, pull #16
ldmneia r1!, {r4, r7} @ Shouldnt fault
orrne r3, r3, r4, push #16
@ -474,21 +476,21 @@ USER( ldrnet r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #16
strne r3, [r0], #4
ands ip, ip, #3
beq .cfu_2fupi
.cfu_2nowords: mov r3, r7, get_byte_2
beq .Lcfu_2fupi
.Lcfu_2nowords: mov r3, r7, get_byte_2
teq ip, #0
beq .cfu_finished
beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
movge r3, r7, get_byte_3
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #0) @ May fault
strgtb r3, [r0], #1
b .cfu_finished
b .Lcfu_finished
.cfu_3fupi: subs r2, r2, #4
.Lcfu_3fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .cfu_3nowords
bmi .Lcfu_3nowords
mov r3, r7, pull #24
USER( ldrt r7, [r1], #4) @ May fault
orr r3, r3, r7, push #8
@ -496,14 +498,14 @@ USER( ldrt r7, [r1], #4) @ May fault
mov ip, r1, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
beq .cfu_3fupi
beq .Lcfu_3fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_3rem8lp
blt .Lcfu_3rem8lp
.cfu_3cpy8lp: mov r3, r7, pull #24
.Lcfu_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7} @ Shouldnt fault
orr r3, r3, r4, push #8
mov r4, r4, pull #24
@ -514,9 +516,9 @@ USER( ldrt r7, [r1], #4) @ May fault
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6}
subs ip, ip, #16
bpl .cfu_3cpy8lp
bpl .Lcfu_3cpy8lp
.cfu_3rem8lp: tst ip, #8
.Lcfu_3rem8lp: tst ip, #8
movne r3, r7, pull #24
ldmneia r1!, {r4, r7} @ Shouldnt fault
orrne r3, r3, r4, push #8
@ -529,17 +531,17 @@ USER( ldrnet r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #8
strne r3, [r0], #4
ands ip, ip, #3
beq .cfu_3fupi
.cfu_3nowords: mov r3, r7, get_byte_3
beq .Lcfu_3fupi
.Lcfu_3nowords: mov r3, r7, get_byte_3
teq ip, #0
beq .cfu_finished
beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
USER( ldrgebt r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
b .cfu_finished
b .Lcfu_finished
.section .fixup,"ax"
.align 0

Some files were not shown because too many files have changed in this diff Show More