Merge drm/drm-next into drm-misc-next

Backmerging for v5.16-rc5. Resolves a conflict between drm-misc-next and drm-misc-fixes in the vc4 driver. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-12-12 13:34:10 +08:00 · 2021-12-16 14:47:38 +01:00 · 2021-12-16 14:47:38 +01:00 · 9758ff2fa2
commit 9758ff2fa2
parent 0b665d4af3 244a36e50d
1567 changed files with 30643 additions and 16769 deletions
--- a/.mailmap
+++ b/.mailmap
@ -71,6 +71,9 @@ Chao Yu <chao@kernel.org> <chao2.yu@samsung.com>
 Chao Yu <chao@kernel.org> <yuchao0@huawei.com>
 Chris Chiu <chris.chiu@canonical.com> <chiu@endlessm.com>
 Chris Chiu <chris.chiu@canonical.com> <chiu@endlessos.org>
+Christian Borntraeger <borntraeger@linux.ibm.com> <borntraeger@de.ibm.com>
+Christian Borntraeger <borntraeger@linux.ibm.com> <cborntra@de.ibm.com>
+Christian Borntraeger <borntraeger@linux.ibm.com> <borntrae@de.ibm.com>
 Christophe Ricard <christophe.ricard@gmail.com>
 Christoph Hellwig <hch@lst.de>
 Colin Ian King <colin.king@intel.com> <colin.king@canonical.com>
@ -123,6 +126,8 @@ Greg Kroah-Hartman <gregkh@suse.de>
 Greg Kroah-Hartman <greg@kroah.com>
 Greg Kurz <groug@kaod.org> <gkurz@linux.vnet.ibm.com>
 Gregory CLEMENT <gregory.clement@bootlin.com> <gregory.clement@free-electrons.com>
+Guo Ren <guoren@kernel.org> <guoren@linux.alibaba.com>
+Guo Ren <guoren@kernel.org> <ren_guo@c-sky.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>
 Gustavo Padovan <padovan@profusion.mobi>
 Hanjun Guo <guohanjun@huawei.com> <hanjun.guo@linaro.org>
--- a/Documentation/admin-guide/blockdev/drbd/figures.rst
+++ b/Documentation/admin-guide/blockdev/drbd/figures.rst
@ -25,6 +25,6 @@ Sub graphs of DRBD's state transitions
    :alt:   disk-states-8.dot
    :align: center

-.. kernel-figure:: node-states-8.dot
-    :alt:   node-states-8.dot
+.. kernel-figure:: peer-states-8.dot
+    :alt:   peer-states-8.dot
    :align: center
--- a/Documentation/admin-guide/blockdev/drbd/peer-states-8.dot
+++ b/Documentation/admin-guide/blockdev/drbd/peer-states-8.dot
@ -1,8 +1,3 @@
-digraph node_states {
-	Secondary -> Primary           [ label = "ioctl_set_state()" ]
-	Primary   -> Secondary 	       [ label = "ioctl_set_state()" ]
-}
-
 digraph peer_states {
 	Secondary -> Primary           [ label = "recv state packet" ]
 	Primary   -> Secondary 	       [ label = "recv state packet" ]
--- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst
+++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@ -1520,15 +1520,15 @@ This sysfs attribute controls the keyboard "face" that will be shown on the
 Lenovo X1 Carbon 2nd gen (2014)'s adaptive keyboard. The value can be read
 and set.

- 1 = Home mode
- 2 = Web-browser mode
- 3 = Web-conference mode
- 4 = Function mode
- 5 = Layflat mode
+- 0 = Home mode
+- 1 = Web-browser mode
+- 2 = Web-conference mode
+- 3 = Function mode
+- 4 = Layflat mode

 For more details about which buttons will appear depending on the mode, please
 review the laptop's user guide:
-http://www.lenovo.com/shop/americas/content/user_guides/x1carbon_2_ug_en.pdf
+https://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/x1carbon_2_ug_en.pdf

 Battery charge control
 ----------------------
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@ -1099,7 +1099,7 @@ task_delayacct
 ===============

 Enables/disables task delay accounting (see
-:doc:`accounting/delay-accounting.rst`). Enabling this feature incurs
+Documentation/accounting/delay-accounting.rst. Enabling this feature incurs
 a small amount of overhead in the scheduler but is useful for debugging
 and performance tuning. It is required by some tools such as iotop.

--- a/Documentation/arm/marvell.rst
+++ b/Documentation/arm/marvell.rst
@ -104,6 +104,8 @@ Discovery family

                Not supported by the Linux kernel.

+  Homepage:
+        https://web.archive.org/web/20110924171043/http://www.marvell.com/embedded-processors/discovery-innovation/
  Core:
 	Feroceon 88fr571-vd ARMv5 compatible

@ -120,6 +122,7 @@ EBU Armada family
        - 88F6707
        - 88F6W11

+    - Product infos:   https://web.archive.org/web/20141002083258/http://www.marvell.com/embedded-processors/armada-370/
    - Product Brief:   https://web.archive.org/web/20121115063038/http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
    - Hardware Spec:   https://web.archive.org/web/20140617183747/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-datasheet.pdf
    - Functional Spec: https://web.archive.org/web/20140617183701/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-FunctionalSpec-datasheet.pdf
@ -127,9 +130,29 @@ EBU Armada family
  Core:
 	Sheeva ARMv7 compatible PJ4B

+  Armada XP Flavors:
+        - MV78230
+        - MV78260
+        - MV78460
+
+    NOTE:
+	not to be confused with the non-SMP 78xx0 SoCs
+
+    - Product infos:   https://web.archive.org/web/20150101215721/http://www.marvell.com/embedded-processors/armada-xp/
+    - Product Brief:   https://web.archive.org/web/20121021173528/http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
+    - Functional Spec: https://web.archive.org/web/20180829171131/http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf
+    - Hardware Specs:
+        - https://web.archive.org/web/20141127013651/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78230_OS.PDF
+        - https://web.archive.org/web/20141222000224/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78260_OS.PDF
+        - https://web.archive.org/web/20141222000230/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78460_OS.PDF
+
+  Core:
+	Sheeva ARMv7 compatible Dual-core or Quad-core PJ4B-MP
+
  Armada 375 Flavors:
 	- 88F6720

+    - Product infos: https://web.archive.org/web/20140108032402/http://www.marvell.com/embedded-processors/armada-375/
    - Product Brief: https://web.archive.org/web/20131216023516/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA_375_SoC-01_product_brief.pdf

  Core:
@ -162,29 +185,6 @@ EBU Armada family
  Core:
 	ARM Cortex-A9

-  Armada XP Flavors:
-        - MV78230
-        - MV78260
-        - MV78460
-
-    NOTE:
-	not to be confused with the non-SMP 78xx0 SoCs
-
-    Product Brief:
-	https://web.archive.org/web/20121021173528/http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
-
-    Functional Spec:
-	https://web.archive.org/web/20180829171131/http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf
-
-    - Hardware Specs:
-
-        - https://web.archive.org/web/20141127013651/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78230_OS.PDF
-        - https://web.archive.org/web/20141222000224/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78260_OS.PDF
-        - https://web.archive.org/web/20141222000230/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78460_OS.PDF
-
-  Core:
-	Sheeva ARMv7 compatible Dual-core or Quad-core PJ4B-MP
-
  Linux kernel mach directory:
 	arch/arm/mach-mvebu
  Linux kernel plat directory:
@ -436,7 +436,7 @@ Berlin family (Multimedia Solutions)
  - Flavors:
 	- 88DE3010, Armada 1000 (no Linux support)
 		- Core:		Marvell PJ1 (ARMv5TE), Dual-core
-		- Product Brief:	http://www.marvell.com.cn/digital-entertainment/assets/armada_1000_pb.pdf
+		- Product Brief:	https://web.archive.org/web/20131103162620/http://www.marvell.com/digital-entertainment/assets/armada_1000_pb.pdf
 	- 88DE3005, Armada 1500 Mini
 		- Design name:	BG2CD
 		- Core:		ARM Cortex-A9, PL310 L2CC
--- a/Documentation/arm64/pointer-authentication.rst
+++ b/Documentation/arm64/pointer-authentication.rst
@ -53,11 +53,10 @@ The number of bits that the PAC occupies in a pointer is 55 minus the
 virtual address size configured by the kernel. For example, with a
 virtual address size of 48, the PAC is 7 bits wide.

-Recent versions of GCC can compile code with APIAKey-based return
-address protection when passed the -msign-return-address option. This
-uses instructions in the HINT space (unless -march=armv8.3-a or higher
-is also passed), and such code can run on systems without the pointer
-authentication extension.
+When ARM64_PTR_AUTH_KERNEL is selected, the kernel will be compiled
+with HINT space pointer authentication instructions protecting
+function returns. Kernels built with this option will work on hardware
+with or without pointer authentication support.

 In addition to exec(), keys can also be reinitialized to random values
 using the PR_PAC_RESET_KEYS prctl. A bitmask of PR_PAC_APIAKEY,
--- a/Documentation/bpf/index.rst
+++ b/Documentation/bpf/index.rst
@ -15,7 +15,7 @@ that goes into great technical depth about the BPF Architecture.
 libbpf
 ======

-Documentation/bpf/libbpf/libbpf.rst is a userspace library for loading and interacting with bpf programs.
+Documentation/bpf/libbpf/index.rst is a userspace library for loading and interacting with bpf programs.

 BPF Type Format (BTF)
 =====================
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@ -249,11 +249,16 @@ except ImportError:

 html_static_path = ['sphinx-static']

-html_context = {
-    'css_files': [
-        '_static/theme_overrides.css',
-    ],
-}
+html_css_files = [
+    'theme_overrides.css',
+]
+
+if major <= 1 and minor < 8:
+    html_context = {
+        'css_files': [
+            '_static/theme_overrides.css',
+        ],
+    }

 # Add any extra paths that contain custom files (such as robots.txt or
 # .htaccess) here, relative to this directory. These files are copied
--- a/Documentation/cpu-freq/core.rst
+++ b/Documentation/cpu-freq/core.rst
@ -73,12 +73,12 @@ CPUFREQ_POSTCHANGE.
 The third argument is a struct cpufreq_freqs with the following
 values:

-=====	===========================
-cpu	number of the affected CPU
+======	======================================
+policy	a pointer to the struct cpufreq_policy
 old	old frequency
 new	new frequency
 flags	flags of the cpufreq driver
-=====	===========================
+======	======================================

 3. CPUFreq Table Generation with Operating Performance Point (OPP)
 ==================================================================
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car MIPI DSI/CSI-2 Encoder
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
+  R-Car V3U SoC. The encoder can operate in either DSI or CSI-2 mode, with up
+  to four data lanes.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a779a0-dsi-csi2-tx    # for V3U
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Functional clock
+      - description: DSI (and CSI-2) functional clock
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: dsi
+      - const: pll
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI/CSI-2 output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    dsi0: dsi-encoder@fed80000 {
+        compatible = "renesas,r8a779a0-dsi-csi2-tx";
+        reg = <0xfed80000 0x10000>;
+        power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+        clocks = <&cpg CPG_MOD 415>,
+                 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+                 <&cpg CPG_CORE R8A779A0_CLK_CP>;
+        clock-names = "fck", "dsi", "pll";
+        resets = <&cpg 415>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&sn65dsi86_in>;
+                };
+            };
+        };
+    };
+...
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
@ -17,9 +17,10 @@ properties:
    oneOf:
      - enum:
          - fsl,imx7ulp-lpi2c
-          - fsl,imx8qm-lpi2c
      - items:
-          - const: fsl,imx8qxp-lpi2c
+          - enum:
+              - fsl,imx8qxp-lpi2c
+              - fsl,imx8qm-lpi2c
          - const: fsl,imx7ulp-lpi2c

  reg:
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@ -136,7 +136,7 @@ examples:
        samsung,syscon-phandle = <&pmu_system_controller>;

        /* NTC thermistor is a hwmon device */
-        ncp15wb473 {
+        thermistor {
            compatible = "murata,ncp15wb473";
            pullup-uv = <1800000>;
            pullup-ohm = <47000>;
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@ -142,7 +142,7 @@ examples:
        down {
            label = "GPIO Key DOWN";
            linux,code = <108>;
-            interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
        };
    };

--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@ -79,6 +79,8 @@ properties:

            properties:
              data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
                items:
                  minItems: 1
                  maxItems: 4
@ -91,18 +93,6 @@ properties:
            required:
              - data-lanes

-            allOf:
-              - if:
-                  properties:
-                    compatible:
-                      contains:
-                        const: fsl,imx7-mipi-csi2
-                then:
-                  properties:
-                    data-lanes:
-                      items:
-                        maxItems: 2
-
      port@1:
        $ref: /schemas/graph.yaml#/properties/port
        description:
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@ -91,6 +91,14 @@ properties:
      compensate for the board being designed with the lanes
      swapped.

+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
  eee-broken-100tx:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
--- a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
+++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
@ -29,7 +29,7 @@ properties:
          - PHY_TYPE_PCIE
          - PHY_TYPE_SATA
          - PHY_TYPE_SGMII
-          - PHY_TYPE_USB
+          - PHY_TYPE_USB3
      - description: The PHY instance
        minimum: 0
        maximum: 1 # for DP, SATA or USB
--- a/Documentation/devicetree/bindings/power/supply/bq25980.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@ -105,7 +105,7 @@ examples:
          reg = <0x65>;
          interrupt-parent = <&gpio1>;
          interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-          ti,watchdog-timer = <0>;
+          ti,watchdog-timeout-ms = <0>;
          ti,sc-ocp-limit-microamp = <2000000>;
          ti,sc-ovp-limit-microvolt = <17800000>;
          monitored-battery = <&bat>;
--- a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml
@ -19,6 +19,9 @@ properties:
  clocks:
    maxItems: 1

+  interrupts:
+    maxItems: 1
+
  "#sound-dai-cells":
    const: 0

--- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@ -33,6 +33,7 @@ properties:
              - rockchip,rk3328-spi
              - rockchip,rk3368-spi
              - rockchip,rk3399-spi
+              - rockchip,rk3568-spi
              - rockchip,rv1126-spi
          - const: rockchip,rk3066-spi

--- a/Documentation/doc-guide/sphinx.rst
+++ b/Documentation/doc-guide/sphinx.rst
@ -27,7 +27,7 @@ Sphinx Install
 ==============

 The ReST markups currently used by the Documentation/ files are meant to be
-built with ``Sphinx`` version 1.3 or higher.
+built with ``Sphinx`` version 1.7 or higher.

 There's a script that checks for the Sphinx requirements. Please see
 :ref:`sphinx-pre-install` for further details.
@ -43,10 +43,6 @@ or ``virtualenv``, depending on how your distribution packaged Python 3.

 .. note::

-   #) Sphinx versions below 1.5 don't work properly with Python's
-      docutils version 0.13.1 or higher. So, if you're willing to use
-      those versions, you should run ``pip install 'docutils==0.12'``.
-
   #) It is recommended to use the RTD theme for html output. Depending
      on the Sphinx version, it should be installed separately,
      with ``pip install sphinx_rtd_theme``.
@ -55,13 +51,13 @@ or ``virtualenv``, depending on how your distribution packaged Python 3.
      those expressions are written using LaTeX notation. It needs texlive
      installed with amsfonts and amsmath in order to evaluate them.

-In summary, if you want to install Sphinx version 1.7.9, you should do::
+In summary, if you want to install Sphinx version 2.4.4, you should do::

-       $ virtualenv sphinx_1.7.9
-       $ . sphinx_1.7.9/bin/activate
-       (sphinx_1.7.9) $ pip install -r Documentation/sphinx/requirements.txt
+       $ virtualenv sphinx_2.4.4
+       $ . sphinx_2.4.4/bin/activate
+       (sphinx_2.4.4) $ pip install -r Documentation/sphinx/requirements.txt

-After running ``. sphinx_1.7.9/bin/activate``, the prompt will change,
+After running ``. sphinx_2.4.4/bin/activate``, the prompt will change,
 in order to indicate that you're using the new environment. If you
 open a new shell, you need to rerun this command to enter again at
 the virtual environment before building the documentation.
@ -81,7 +77,7 @@ output.
 PDF and LaTeX builds
 --------------------

-Such builds are currently supported only with Sphinx versions 1.4 and higher.
+Such builds are currently supported only with Sphinx versions 2.4 and higher.

 For PDF and LaTeX output, you'll also need ``XeLaTeX`` version 3.14159265.

@ -104,8 +100,8 @@ command line options for your distro::
 	You should run:

 		sudo dnf install -y texlive-luatex85
-		/usr/bin/virtualenv sphinx_1.7.9
-		. sphinx_1.7.9/bin/activate
+		/usr/bin/virtualenv sphinx_2.4.4
+		. sphinx_2.4.4/bin/activate
 		pip install -r Documentation/sphinx/requirements.txt

 	Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468.
--- a/Documentation/filesystems/autofs.rst
+++ b/Documentation/filesystems/autofs.rst
@ -35,7 +35,7 @@ This document describes only the kernel module and the interactions
 required with any user-space program.  Subsequent text refers to this
 as the "automount daemon" or simply "the daemon".

-"autofs" is a Linux kernel module with provides the "autofs"
+"autofs" is a Linux kernel module which provides the "autofs"
 filesystem type.  Several "autofs" filesystems can be mounted and they
 can each be managed separately, or all managed by the same daemon.

--- a/Documentation/filesystems/cifs/ksmbd.rst
+++ b/Documentation/filesystems/cifs/ksmbd.rst
@ -50,11 +50,11 @@ ksmbd.mountd (user space daemon)
 --------------------------------

 ksmbd.mountd is userspace process to, transfer user account and password that
-are registered using ksmbd.adduser(part of utils for user space). Further it
+are registered using ksmbd.adduser (part of utils for user space). Further it
 allows sharing information parameters that parsed from smb.conf to ksmbd in
 kernel. For the execution part it has a daemon which is continuously running
 and connected to the kernel interface using netlink socket, it waits for the
-requests(dcerpc and share/user info). It handles RPC calls (at a minimum few
+requests (dcerpc and share/user info). It handles RPC calls (at a minimum few
 dozen) that are most important for file server from NetShareEnum and
 NetServerGetInfo. Complete DCE/RPC response is prepared from the user space
 and passed over to the associated kernel thread for the client.
@ -154,11 +154,11 @@ Each layer
 1. Enable all component prints
 	# sudo ksmbd.control -d "all"

-2. Enable one of components(smb, auth, vfs, oplock, ipc, conn, rdma)
+2. Enable one of components (smb, auth, vfs, oplock, ipc, conn, rdma)
 	# sudo ksmbd.control -d "smb"

-3. Show what prints are enable.
-	# cat/sys/class/ksmbd-control/debug
+3. Show what prints are enabled.
+	# cat /sys/class/ksmbd-control/debug
 	  [smb] auth vfs oplock ipc conn [rdma]

 4. Disable prints:
--- a/Documentation/filesystems/netfs_library.rst
+++ b/Documentation/filesystems/netfs_library.rst
@ -1,7 +1,7 @@
 .. SPDX-License-Identifier: GPL-2.0

 =================================
-NETWORK FILESYSTEM HELPER LIBRARY
+Network Filesystem Helper Library
 =================================

 .. Contents:
@ -37,22 +37,22 @@ into a common call framework.

 The following services are provided:

- * Handles transparent huge pages (THPs).
+ * Handle folios that span multiple pages.

- * Insulates the netfs from VM interface changes.
+ * Insulate the netfs from VM interface changes.

- * Allows the netfs to arbitrarily split reads up into pieces, even ones that
-   don't match page sizes or page alignments and that may cross pages.
+ * Allow the netfs to arbitrarily split reads up into pieces, even ones that
+   don't match folio sizes or folio alignments and that may cross folios.

- * Allows the netfs to expand a readahead request in both directions to meet
-   its needs.
+ * Allow the netfs to expand a readahead request in both directions to meet its
+   needs.

- * Allows the netfs to partially fulfil a read, which will then be resubmitted.
+ * Allow the netfs to partially fulfil a read, which will then be resubmitted.

- * Handles local caching, allowing cached data and server-read data to be
+ * Handle local caching, allowing cached data and server-read data to be
   interleaved for a single request.

- * Handles clearing of bufferage that aren't on the server.
+ * Handle clearing of bufferage that aren't on the server.

 * Handle retrying of reads that failed, switching reads from the cache to the
   server as necessary.
@ -70,22 +70,22 @@ Read Helper Functions

 Three read helpers are provided::

- * void netfs_readahead(struct readahead_control *ractl,
-			const struct netfs_read_request_ops *ops,
-			void *netfs_priv);``
- * int netfs_readpage(struct file *file,
-		      struct page *page,
-		      const struct netfs_read_request_ops *ops,
-		      void *netfs_priv);
- * int netfs_write_begin(struct file *file,
-			 struct address_space *mapping,
-			 loff_t pos,
-			 unsigned int len,
-			 unsigned int flags,
-			 struct page **_page,
-			 void **_fsdata,
-			 const struct netfs_read_request_ops *ops,
-			 void *netfs_priv);
+	void netfs_readahead(struct readahead_control *ractl,
+			     const struct netfs_read_request_ops *ops,
+			     void *netfs_priv);
+	int netfs_readpage(struct file *file,
+			   struct folio *folio,
+			   const struct netfs_read_request_ops *ops,
+			   void *netfs_priv);
+	int netfs_write_begin(struct file *file,
+			      struct address_space *mapping,
+			      loff_t pos,
+			      unsigned int len,
+			      unsigned int flags,
+			      struct folio **_folio,
+			      void **_fsdata,
+			      const struct netfs_read_request_ops *ops,
+			      void *netfs_priv);

 Each corresponds to a VM operation, with the addition of a couple of parameters
 for the use of the read helpers:
@ -103,8 +103,8 @@ Both of these values will be stored into the read request structure.
 For ->readahead() and ->readpage(), the network filesystem should just jump
 into the corresponding read helper; whereas for ->write_begin(), it may be a
 little more complicated as the network filesystem might want to flush
-conflicting writes or track dirty data and needs to put the acquired page if an
-error occurs after calling the helper.
+conflicting writes or track dirty data and needs to put the acquired folio if
+an error occurs after calling the helper.

 The helpers manage the read request, calling back into the network filesystem
 through the suppplied table of operations.  Waits will be performed as
@ -253,7 +253,7 @@ through which it can issue requests and negotiate::
 		void (*issue_op)(struct netfs_read_subrequest *subreq);
 		bool (*is_still_valid)(struct netfs_read_request *rreq);
 		int (*check_write_begin)(struct file *file, loff_t pos, unsigned len,
-					 struct page *page, void **_fsdata);
+					 struct folio *folio, void **_fsdata);
 		void (*done)(struct netfs_read_request *rreq);
 		void (*cleanup)(struct address_space *mapping, void *netfs_priv);
 	};
@ -313,13 +313,14 @@ The operations are as follows:

   There is no return value; the netfs_subreq_terminated() function should be
   called to indicate whether or not the operation succeeded and how much data
-   it transferred.  The filesystem also should not deal with setting pages
+   it transferred.  The filesystem also should not deal with setting folios
   uptodate, unlocking them or dropping their refs - the helpers need to deal
   with this as they have to coordinate with copying to the local cache.

-   Note that the helpers have the pages locked, but not pinned.  It is possible
-   to use the ITER_XARRAY iov iterator to refer to the range of the inode that
-   is being operated upon without the need to allocate large bvec tables.
+   Note that the helpers have the folios locked, but not pinned.  It is
+   possible to use the ITER_XARRAY iov iterator to refer to the range of the
+   inode that is being operated upon without the need to allocate large bvec
+   tables.

 * ``is_still_valid()``

@ -330,15 +331,15 @@ The operations are as follows:
 * ``check_write_begin()``

   [Optional] This is called from the netfs_write_begin() helper once it has
-   allocated/grabbed the page to be modified to allow the filesystem to flush
+   allocated/grabbed the folio to be modified to allow the filesystem to flush
   conflicting state before allowing it to be modified.

-   It should return 0 if everything is now fine, -EAGAIN if the page should be
+   It should return 0 if everything is now fine, -EAGAIN if the folio should be
   regrabbed and any other error code to abort the operation.

 * ``done``

-   [Optional] This is called after the pages in the request have all been
+   [Optional] This is called after the folios in the request have all been
   unlocked (and marked uptodate if applicable).

 * ``cleanup``
@ -390,7 +391,7 @@ The read helpers work by the following general procedure:
     * If NETFS_SREQ_CLEAR_TAIL was set, a short read will be cleared to the
       end of the slice instead of reissuing.

- * Once the data is read, the pages that have been fully read/cleared:
+ * Once the data is read, the folios that have been fully read/cleared:

   * Will be marked uptodate.

@ -398,11 +399,11 @@ The read helpers work by the following general procedure:

   * Unlocked

- * Any pages that need writing to the cache will then have DIO writes issued.
+ * Any folios that need writing to the cache will then have DIO writes issued.

 * Synchronous operations will wait for reading to be complete.

- * Writes to the cache will proceed asynchronously and the pages will have the
+ * Writes to the cache will proceed asynchronously and the folios will have the
   PG_fscache mark removed when that completes.

 * The request structures will be cleaned up when everything has completed.
@ -452,6 +453,9 @@ operation table looks like the following::
 			    netfs_io_terminated_t term_func,
 			    void *term_func_priv);

+		int (*prepare_write)(struct netfs_cache_resources *cres,
+				     loff_t *_start, size_t *_len, loff_t i_size);
+
 		int (*write)(struct netfs_cache_resources *cres,
 			     loff_t start_pos,
 			     struct iov_iter *iter,
@ -509,6 +513,14 @@ The methods defined in the table are:
   indicating whether the termination is definitely happening in the caller's
   context.

+ * ``prepare_write()``
+
+   [Required] Called to adjust a write to the cache and check that there is
+   sufficient space in the cache.  The start and length values indicate the
+   size of the write that netfslib is proposing, and this can be adjusted by
+   the cache to respect DIO boundaries.  The file size is passed for
+   information.
+
 * ``write()``

   [Required] Called to write to the cache.  The start file offset is given
@ -525,4 +537,9 @@ not the read request structure as they could be used in other situations where
 there isn't a read request structure as well, such as writing dirty data to the
 cache.

+
+API Function Reference
+======================
+
 .. kernel-doc:: include/linux/netfs.h
+.. kernel-doc:: fs/netfs/read_helper.c
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@ -36,6 +36,8 @@ Key to symbols

 =============== =============================================================
 S               Start condition
+Sr              Repeated start condition, used to switch from write to
+                read mode.
 P               Stop condition
 Rd/Wr (1 bit)   Read/Write bit. Rd equals 1, Wr equals 0.
 A, NA (1 bit)   Acknowledge (ACK) and Not Acknowledge (NACK) bit
@ -100,7 +102,7 @@ Implemented by i2c_smbus_read_byte_data()
 This reads a single byte from a device, from a designated register.
 The register is specified through the Comm byte::

-  S Addr Wr [A] Comm [A] S Addr Rd [A] [Data] NA P
+  S Addr Wr [A] Comm [A] Sr Addr Rd [A] [Data] NA P

 Functionality flag: I2C_FUNC_SMBUS_READ_BYTE_DATA

@ -114,7 +116,7 @@ This operation is very like Read Byte; again, data is read from a
 device, from a designated register that is specified through the Comm
 byte. But this time, the data is a complete word (16 bits)::

-  S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P
+  S Addr Wr [A] Comm [A] Sr Addr Rd [A] [DataLow] A [DataHigh] NA P

 Functionality flag: I2C_FUNC_SMBUS_READ_WORD_DATA

@ -164,7 +166,7 @@ This command selects a device register (through the Comm byte), sends
 16 bits of data to it, and reads 16 bits of data in return::

  S Addr Wr [A] Comm [A] DataLow [A] DataHigh [A]
-                               S Addr Rd [A] [DataLow] A [DataHigh] NA P
+                              Sr Addr Rd [A] [DataLow] A [DataHigh] NA P

 Functionality flag: I2C_FUNC_SMBUS_PROC_CALL

@ -181,7 +183,7 @@ of data is specified by the device in the Count byte.
 ::

  S Addr Wr [A] Comm [A]
-             S Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P
+            Sr Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P

 Functionality flag: I2C_FUNC_SMBUS_READ_BLOCK_DATA

@ -212,7 +214,7 @@ This command selects a device register (through the Comm byte), sends
 1 to 31 bytes of data to it, and reads 1 to 31 bytes of data in return::

  S Addr Wr [A] Comm [A] Count [A] Data [A] ...
-                               S Addr Rd [A] [Count] A [Data] ... A P
+                              Sr Addr Rd [A] [Count] A [Data] ... A P

 Functionality flag: I2C_FUNC_SMBUS_BLOCK_PROC_CALL

@ -300,7 +302,7 @@ This command reads a block of bytes from a device, from a
 designated register that is specified through the Comm byte::

  S Addr Wr [A] Comm [A]
-             S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P
+            Sr Addr Rd [A] [Data] A [Data] A ... A [Data] NA P

 Functionality flag: I2C_FUNC_SMBUS_READ_I2C_BLOCK

--- a/Documentation/locking/locktypes.rst
+++ b/Documentation/locking/locktypes.rst
@ -439,11 +439,9 @@ preemption. The following substitution works on both kernels::
  spin_lock(&p->lock);
  p->count += this_cpu_read(var2);

-On a non-PREEMPT_RT kernel migrate_disable() maps to preempt_disable()
-which makes the above code fully equivalent. On a PREEMPT_RT kernel
 migrate_disable() ensures that the task is pinned on the current CPU which
 in turn guarantees that the per-CPU access to var1 and var2 are staying on
-the same CPU.
+the same CPU while the task remains preemptible.

 The migrate_disable() substitution is not valid for the following
 scenario::
@ -456,9 +454,8 @@ scenario::
    p = this_cpu_ptr(&var1);
    p->val = func2();

-While correct on a non-PREEMPT_RT kernel, this breaks on PREEMPT_RT because
-here migrate_disable() does not protect against reentrancy from a
-preempting task. A correct substitution for this case is::
+This breaks because migrate_disable() does not protect against reentrancy from
+a preempting task. A correct substitution for this case is::

  func()
  {
--- a/Documentation/networking/ipvs-sysctl.rst
+++ b/Documentation/networking/ipvs-sysctl.rst
@ -37,8 +37,7 @@ conn_reuse_mode - INTEGER

 	0: disable any special handling on port reuse. The new
 	connection will be delivered to the same real server that was
-	servicing the previous connection. This will effectively
-	disable expire_nodest_conn.
+	servicing the previous connection.

 	bit 1: enable rescheduling of new connections when it is safe.
 	That is, whenever expire_nodest_conn and for TCP sockets, when
--- a/Documentation/networking/timestamping.rst
+++ b/Documentation/networking/timestamping.rst
@ -486,8 +486,8 @@ of packets.
 Drivers are free to use a more permissive configuration than the requested
 configuration. It is expected that drivers should only implement directly the
 most generic mode that can be supported. For example if the hardware can
-support HWTSTAMP_FILTER_V2_EVENT, then it should generally always upscale
-HWTSTAMP_FILTER_V2_L2_SYNC_MESSAGE, and so forth, as HWTSTAMP_FILTER_V2_EVENT
+support HWTSTAMP_FILTER_PTP_V2_EVENT, then it should generally always upscale
+HWTSTAMP_FILTER_PTP_V2_L2_SYNC, and so forth, as HWTSTAMP_FILTER_PTP_V2_EVENT
 is more generic (and more useful to applications).

 A driver which supports hardware time stamping shall update the struct
--- a/Documentation/power/energy-model.rst
+++ b/Documentation/power/energy-model.rst
@ -84,6 +84,16 @@ CONFIG_ENERGY_MODEL must be enabled to use the EM framework.
 2.2 Registration of performance domains
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

+Registration of 'advanced' EM
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The 'advanced' EM gets it's name due to the fact that the driver is allowed
+to provide more precised power model. It's not limited to some implemented math
+formula in the framework (like it's in 'simple' EM case). It can better reflect
+the real power measurements performed for each performance state. Thus, this
+registration method should be preferred in case considering EM static power
+(leakage) is important.
+
 Drivers are expected to register performance domains into the EM framework by
 calling the following API::

@ -103,6 +113,18 @@ to: return warning/error, stop working or panic.
 See Section 3. for an example of driver implementing this
 callback, or Section 2.4 for further documentation on this API

+Registration of 'simple' EM
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The 'simple' EM is registered using the framework helper function
+cpufreq_register_em_with_opp(). It implements a power model which is tight to
+math formula::
+
+	Power = C * V^2 * f
+
+The EM which is registered using this method might not reflect correctly the
+physics of a real device, e.g. when static power (leakage) is important.
+

 2.3 Accessing performance domains
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@ -138,6 +160,10 @@ or in Section 2.4
 3. Example driver
 -----------------

+The CPUFreq framework supports dedicated callback for registering
+the EM for a given CPU(s) 'policy' object: cpufreq_driver::register_em().
+That callback has to be implemented properly for a given driver,
+because the framework would call it at the right time during setup.
 This section provides a simple example of a CPUFreq driver registering a
 performance domain in the Energy Model framework using the (fake) 'foo'
 protocol. The driver implements an est_power() function to be provided to the
@ -167,25 +193,22 @@ EM framework::
  20		return 0;
  21	}
  22
-  23	static int foo_cpufreq_init(struct cpufreq_policy *policy)
+  23	static void foo_cpufreq_register_em(struct cpufreq_policy *policy)
  24	{
  25		struct em_data_callback em_cb = EM_DATA_CB(est_power);
  26		struct device *cpu_dev;
-  27		int nr_opp, ret;
+  27		int nr_opp;
  28
  29		cpu_dev = get_cpu_device(cpumask_first(policy->cpus));
  30
-  31     	/* Do the actual CPUFreq init work ... */
-  32     	ret = do_foo_cpufreq_init(policy);
-  33     	if (ret)
-  34     		return ret;
-  35
-  36     	/* Find the number of OPPs for this policy */
-  37     	nr_opp = foo_get_nr_opp(policy);
+  31     	/* Find the number of OPPs for this policy */
+  32     	nr_opp = foo_get_nr_opp(policy);
+  33
+  34     	/* And register the new performance domain */
+  35     	em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, policy->cpus,
+  36					    true);
+  37	}
  38
-  39     	/* And register the new performance domain */
-  40     	em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, policy->cpus,
-  41					    true);
-  42
-  43	        return 0;
-  44	}
+  39	static struct cpufreq_driver foo_cpufreq_driver = {
+  40		.register_em = foo_cpufreq_register_em,
+  41	};
--- a/Documentation/process/changes.rst
+++ b/Documentation/process/changes.rst
@ -35,6 +35,7 @@ GNU make               3.81             make --version
 binutils               2.23             ld -v
 flex                   2.5.35           flex --version
 bison                  2.0              bison --version
+pahole                 1.16             pahole --version
 util-linux             2.10o            fdformat --version
 kmod                   13               depmod -V
 e2fsprogs              1.41.4           e2fsck -V
@ -54,7 +55,7 @@ mcelog                 0.6              mcelog --version
 iptables               1.4.2            iptables -V
 openssl & libcrypto    1.0.0            openssl version
 bc                     1.06.95          bc --version
-Sphinx\ [#f1]_	       1.3		sphinx-build --version
+Sphinx\ [#f1]_         1.7              sphinx-build --version
 ====================== ===============  ========================================

 .. [#f1] Sphinx is needed only to build the Kernel documentation
@ -108,6 +109,16 @@ Bison
 Since Linux 4.16, the build system generates parsers
 during build.  This requires bison 2.0 or later.

+pahole:
+-------
+
+Since Linux 5.2, if CONFIG_DEBUG_INFO_BTF is selected, the build system
+generates BTF (BPF Type Format) from DWARF in vmlinux, a bit later from kernel
+modules as well.  This requires pahole v1.16 or later.
+
+It is found in the 'dwarves' or 'pahole' distro packages or from
+https://fedorapeople.org/~acme/dwarves/.
+
 Perl
 ----

--- a/Documentation/process/submitting-patches.rst
+++ b/Documentation/process/submitting-patches.rst
@ -14,7 +14,8 @@ works, see Documentation/process/development-process.rst. Also, read
 Documentation/process/submit-checklist.rst
 for a list of items to check before submitting code.  If you are submitting
 a driver, also read Documentation/process/submitting-drivers.rst; for device
-tree binding patches, read Documentation/process/submitting-patches.rst.
+tree binding patches, read
+Documentation/devicetree/bindings/submitting-patches.rst.

 This documentation assumes that you're using ``git`` to prepare your patches.
 If you're unfamiliar with ``git``, you would be well-advised to learn how to
@ -22,8 +23,8 @@ use it, it will make your life as a kernel developer and in general much
 easier.

 Some subsystems and maintainer trees have additional information about
-their workflow and expectations, see :ref:`Documentation/process/maintainer
-handbooks <maintainer_handbooks_main>`.
+their workflow and expectations, see
+:ref:`Documentation/process/maintainer-handbooks.rst <maintainer_handbooks_main>`.

 Obtain a current source tree
 ----------------------------
--- a/Documentation/trace/ftrace.rst
+++ b/Documentation/trace/ftrace.rst
@ -2442,11 +2442,10 @@ Or this simple script!
  #!/bin/bash

  tracefs=`sed -ne 's/^tracefs \(.*\) tracefs.*/\1/p' /proc/mounts`
-  echo nop > $tracefs/tracing/current_tracer
-  echo 0 > $tracefs/tracing/tracing_on
-  echo $$ > $tracefs/tracing/set_ftrace_pid
-  echo function > $tracefs/tracing/current_tracer
-  echo 1 > $tracefs/tracing/tracing_on
+  echo 0 > $tracefs/tracing_on
+  echo $$ > $tracefs/set_ftrace_pid
+  echo function > $tracefs/current_tracer
+  echo 1 > $tracefs/tracing_on
  exec "$@"


--- a/Documentation/translations/it_IT/doc-guide/sphinx.rst
+++ b/Documentation/translations/it_IT/doc-guide/sphinx.rst
@ -35,7 +35,7 @@ Installazione Sphinx
 ====================

 I marcatori ReST utilizzati nei file in Documentation/ sono pensati per essere
-processati da ``Sphinx`` nella versione 1.3 o superiore.
+processati da ``Sphinx`` nella versione 1.7 o superiore.

 Esiste uno script che verifica i requisiti Sphinx. Per ulteriori dettagli
 consultate :ref:`it_sphinx-pre-install`.
@ -53,11 +53,6 @@ pacchettizzato dalla vostra distribuzione.

 .. note::

-   #) Le versioni di Sphinx inferiori alla 1.5 non funzionano bene
-      con il pacchetto Python docutils versione 0.13.1 o superiore.
-      Se volete usare queste versioni, allora dovere eseguire
-      ``pip install 'docutils==0.12'``.
-
   #) Viene raccomandato l'uso del tema RTD per la documentazione in HTML.
      A seconda della versione di Sphinx, potrebbe essere necessaria
      l'installazione tramite il comando ``pip install sphinx_rtd_theme``.
@ -67,13 +62,13 @@ pacchettizzato dalla vostra distribuzione.
      utilizzando LaTeX. Per una corretta interpretazione, è necessario aver
      installato texlive con i pacchetti amdfonts e amsmath.

-Riassumendo, se volete installare la versione 1.7.9 di Sphinx dovete eseguire::
+Riassumendo, se volete installare la versione 2.4.4 di Sphinx dovete eseguire::

-       $ virtualenv sphinx_1.7.9
-       $ . sphinx_1.7.9/bin/activate
-       (sphinx_1.7.9) $ pip install -r Documentation/sphinx/requirements.txt
+       $ virtualenv sphinx_2.4.4
+       $ . sphinx_2.4.4/bin/activate
+       (sphinx_2.4.4) $ pip install -r Documentation/sphinx/requirements.txt

-Dopo aver eseguito ``. sphinx_1.7.9/bin/activate``, il prompt cambierà per
+Dopo aver eseguito ``. sphinx_2.4.4/bin/activate``, il prompt cambierà per
 indicare che state usando il nuovo ambiente. Se aprite un nuova sessione,
 prima di generare la documentazione, dovrete rieseguire questo comando per
 rientrare nell'ambiente virtuale.
@ -94,7 +89,7 @@ Generazione in PDF e LaTeX
 --------------------------

 Al momento, la generazione di questi documenti è supportata solo dalle
-versioni di Sphinx superiori alla 1.4.
+versioni di Sphinx superiori alla 2.4.

 Per la generazione di PDF e LaTeX, avrete bisogno anche del pacchetto
 ``XeLaTeX`` nella versione 3.14159265
@ -119,8 +114,8 @@ l'installazione::
 	You should run:

 		sudo dnf install -y texlive-luatex85
-		/usr/bin/virtualenv sphinx_1.7.9
-		. sphinx_1.7.9/bin/activate
+		/usr/bin/virtualenv sphinx_2.4.4
+		. sphinx_2.4.4/bin/activate
 		pip install -r Documentation/sphinx/requirements.txt

 	Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468.
--- a/Documentation/translations/it_IT/process/changes.rst
+++ b/Documentation/translations/it_IT/process/changes.rst
@ -57,7 +57,7 @@ mcelog                 0.6                mcelog --version
 iptables               1.4.2              iptables -V
 openssl & libcrypto    1.0.0              openssl version
 bc                     1.06.95            bc --version
-Sphinx\ [#f1]_         1.3                sphinx-build --version
+Sphinx\ [#f1]_         1.7                sphinx-build --version
 ====================== =================  ========================================

 .. [#f1] Sphinx è necessario solo per produrre la documentazione del Kernel
--- a/Documentation/translations/zh_CN/doc-guide/sphinx.rst
+++ b/Documentation/translations/zh_CN/doc-guide/sphinx.rst
@ -26,7 +26,7 @@ reStructuredText文件可能包含包含来自源文件的结构化文档注释
 安装Sphinx
 ==========

-Documentation/ 下的ReST文件现在使用sphinx1.3或更高版本构建。
+Documentation/ 下的ReST文件现在使用sphinx1.7或更高版本构建。

 这有一个脚本可以检查Sphinx的依赖项。更多详细信息见
 :ref:`sphinx-pre-install_zh` 。
@ -40,22 +40,19 @@ Documentation/ 下的ReST文件现在使用sphinx1.3或更高版本构建。

 .. note::

-   #) 低于1.5版本的Sphinx无法与Python的0.13.1或更高版本docutils一起正常工作。
-      如果您想使用这些版本，那么应该运行 ``pip install 'docutils==0.12'`` 。
-
   #) html输出建议使用RTD主题。根据Sphinx版本的不同，它应该用
      ``pip install sphinx_rtd_theme`` 单独安装。

   #) 一些ReST页面包含数学表达式。由于Sphinx的工作方式，这些表达式是使用 LaTeX
      编写的。它需要安装amsfonts和amsmath宏包，以便显示。

-总之，如您要安装Sphinx 1.7.9版本，应执行::
+总之，如您要安装Sphinx 2.4.4版本，应执行::

-       $ virtualenv sphinx_1.7.9
-       $ . sphinx_1.7.9/bin/activate
-       (sphinx_1.7.9) $ pip install -r Documentation/sphinx/requirements.txt
+       $ virtualenv sphinx_2.4.4
+       $ . sphinx_2.4.4/bin/activate
+       (sphinx_2.4.4) $ pip install -r Documentation/sphinx/requirements.txt

-在运行 ``. sphinx_1.7.9/bin/activate`` 之后，提示符将变化，以指示您正在使用新
+在运行 ``. sphinx_2.4.4/bin/activate`` 之后，提示符将变化，以指示您正在使用新
 环境。如果您打开了一个新的shell，那么在构建文档之前，您需要重新运行此命令以再
 次进入虚拟环境中。

@ -71,7 +68,7 @@ Documentation/ 下的ReST文件现在使用sphinx1.3或更高版本构建。
 PDF和LaTeX构建
 --------------

-目前只有Sphinx 1.4及更高版本才支持这种构建。
+目前只有Sphinx 2.4及更高版本才支持这种构建。

 对于PDF和LaTeX输出，还需要 ``XeLaTeX`` 3.14159265版本。（译注：此版本号真实
 存在）
@ -93,8 +90,8 @@ PDF和LaTeX构建
 	You should run:

 		sudo dnf install -y texlive-luatex85
-		/usr/bin/virtualenv sphinx_1.7.9
-		. sphinx_1.7.9/bin/activate
+		/usr/bin/virtualenv sphinx_2.4.4
+		. sphinx_2.4.4/bin/activate
 		pip install -r Documentation/sphinx/requirements.txt

 	Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468.
--- a/Documentation/translations/zh_CN/process/management-style.rst
+++ b/Documentation/translations/zh_CN/process/management-style.rst
@ -36,14 +36,14 @@ Linux内核管理风格
 每个人都认为管理者做决定，而且决策很重要。决定越大越痛苦，管理者就必须越高级。
 这很明显，但事实并非如此。

-游戏的名字是 **避免** 做出决定。尤其是，如果有人告诉你“选择（a）或（b），
+最重要的是 **避免** 做出决定。尤其是，如果有人告诉你“选择（a）或（b），
 我们真的需要你来做决定”，你就是陷入麻烦的管理者。你管理的人比你更了解细节，
 所以如果他们来找你做技术决策，你完蛋了。你显然没有能力为他们做这个决定。

 （推论：如果你管理的人不比你更了解细节，你也会被搞砸，尽管原因完全不同。
 也就是说，你的工作是错的，他们应该管理你的才智）

-所以游戏的名字是 **避免** 做出决定，至少是那些大而痛苦的决定。做一些小的
+所以最重要的是 **避免** 做出决定，至少是那些大而痛苦的决定。做一些小的
 和非结果性的决定是很好的，并且使您看起来好像知道自己在做什么，所以内核管理者
 需要做的是将那些大的和痛苦的决定变成那些没有人真正关心的小事情。

--- a/62
+++ b/62
@ -966,6 +966,7 @@ F:	drivers/gpu/drm/amd/include/kgd_kfd_interface.h
 F:	drivers/gpu/drm/amd/include/v9_structs.h
 F:	drivers/gpu/drm/amd/include/vi_structs.h
 F:	include/uapi/linux/kfd_ioctl.h
+F:	include/uapi/linux/kfd_sysfs.h

 AMD SPI DRIVER
 M:	Sanjay R Mehta <sanju.mehta@amd.com>
@ -2263,6 +2264,15 @@ L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	drivers/counter/microchip-tcb-capture.c

+ARM/MILBEAUT ARCHITECTURE
+M:	Taichi Sugaya <sugaya.taichi@socionext.com>
+M:	Takao Orito <orito.takao@socionext.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/boot/dts/milbeaut*
+F:	arch/arm/mach-milbeaut/
+N:	milbeaut
+
 ARM/MIOA701 MACHINE SUPPORT
 M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -2729,10 +2739,11 @@ S:	Maintained
 F:	drivers/memory/*emif*

 ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
+M:	Nishanth Menon <nm@ti.com>
 M:	Santosh Shilimkar <ssantosh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
 F:	arch/arm/boot/dts/keystone-*
 F:	arch/arm/mach-keystone/

@ -3570,13 +3581,14 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/b44.*

-BROADCOM B53 ETHERNET SWITCH DRIVER
+BROADCOM B53/SF2 ETHERNET SWITCH DRIVER
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	netdev@vger.kernel.org
 L:	openwrt-devel@lists.openwrt.org (subscribers-only)
 S:	Supported
 F:	Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
 F:	drivers/net/dsa/b53/*
+F:	drivers/net/dsa/bcm_sf2*
 F:	include/linux/dsa/brcm.h
 F:	include/linux/platform_data/b53.h

@ -3733,7 +3745,7 @@ F:	drivers/scsi/bnx2i/
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
 M:	Ariel Elior <aelior@marvell.com>
 M:	Sudarsana Kalluru <skalluru@marvell.com>
-M:	GR-everest-linux-l2@marvell.com
+M:	Manish Chopra <manishc@marvell.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
@ -6413,6 +6425,7 @@ L:	dri-devel@lists.freedesktop.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
 T:	git git://linuxtv.org/pinchartl/media drm/du/next
+F:	Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
 F:	Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
 F:	Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
 F:	Documentation/devicetree/bindings/display/renesas,du.yaml
@ -9333,7 +9346,6 @@ S:	Maintained
 F:	drivers/iio/pressure/dps310.c

 INFINIBAND SUBSYSTEM
-M:	Doug Ledford <dledford@redhat.com>
 M:	Jason Gunthorpe <jgg@nvidia.com>
 L:	linux-rdma@vger.kernel.org
 S:	Supported
@ -9494,6 +9506,7 @@ INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Jani Nikula <jani.nikula@linux.intel.com>
 M:	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
 M:	Rodrigo Vivi <rodrigo.vivi@intel.com>
+M:	Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
 L:	intel-gfx@lists.freedesktop.org
 S:	Supported
 W:	https://01.org/linuxgraphics/
@ -10284,9 +10297,9 @@ F:	lib/Kconfig.kcsan
 F:	scripts/Makefile.kcsan

 KDUMP
-M:	Dave Young <dyoung@redhat.com>
 M:	Baoquan He <bhe@redhat.com>
 R:	Vivek Goyal <vgoyal@redhat.com>
+R:	Dave Young <dyoung@redhat.com>
 L:	kexec@lists.infradead.org
 S:	Maintained
 W:	http://lse.sourceforge.net/kdump/
@ -10460,7 +10473,7 @@ F:	arch/riscv/include/uapi/asm/kvm*
 F:	arch/riscv/kvm/

 KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
-M:	Christian Borntraeger <borntraeger@de.ibm.com>
+M:	Christian Borntraeger <borntraeger@linux.ibm.com>
 M:	Janosch Frank <frankja@linux.ibm.com>
 R:	David Hildenbrand <david@redhat.com>
 R:	Claudio Imbrenda <imbrenda@linux.ibm.com>
@ -12184,8 +12197,8 @@ F:	drivers/net/ethernet/mellanox/mlx5/core/fpga/*
 F:	include/linux/mlx5/mlx5_ifc_fpga.h

 MELLANOX ETHERNET SWITCH DRIVERS
-M:	Jiri Pirko <jiri@nvidia.com>
 M:	Ido Schimmel <idosch@nvidia.com>
+M:	Petr Machata <petrm@nvidia.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
@ -15608,7 +15621,7 @@ F:	drivers/scsi/qedi/

 QLOGIC QL4xxx ETHERNET DRIVER
 M:	Ariel Elior <aelior@marvell.com>
-M:	GR-everest-linux-l2@marvell.com
+M:	Manish Chopra <manishc@marvell.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qed/
@ -15775,6 +15788,15 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/net/qcom,ethqos.txt
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c

+QUALCOMM FASTRPC DRIVER
+M:	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+M:	Amol Maheshwari <amahesh@qti.qualcomm.com>
+L:	linux-arm-msm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
+F:	drivers/misc/fastrpc.c
+F:	include/uapi/misc/fastrpc.h
+
 QUALCOMM GENERIC INTERFACE I2C DRIVER
 M:	Akash Asthana <akashast@codeaurora.org>
 M:	Mukesh Savaliya <msavaliy@codeaurora.org>
@ -15983,6 +16005,7 @@ F:	arch/mips/generic/board-ranchu.c

 RANDOM NUMBER DRIVER
 M:	"Theodore Ts'o" <tytso@mit.edu>
+M:	Jason A. Donenfeld <Jason@zx2c4.com>
 S:	Maintained
 F:	drivers/char/random.c

@ -16505,6 +16528,12 @@ T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
 F:	drivers/media/platform/sunxi/sun8i-rotate/

+RPMSG TTY DRIVER
+M:	Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
+L:	linux-remoteproc@vger.kernel.org
+S:	Maintained
+F:	drivers/tty/rpmsg_tty.c
+
 RTL2830 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
@ -16588,7 +16617,7 @@ F:	drivers/video/fbdev/savage/
 S390
 M:	Heiko Carstens <hca@linux.ibm.com>
 M:	Vasily Gorbik <gor@linux.ibm.com>
-M:	Christian Borntraeger <borntraeger@de.ibm.com>
+M:	Christian Borntraeger <borntraeger@linux.ibm.com>
 R:	Alexander Gordeev <agordeev@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
@ -16626,8 +16655,8 @@ W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/iommu/s390-iommu.c

 S390 IUCV NETWORK LAYER
-M:	Julian Wiedmann <jwi@linux.ibm.com>
-M:	Karsten Graul <kgraul@linux.ibm.com>
+M:	Alexandra Winter <wintera@linux.ibm.com>
+M:	Wenjia Zhang <wenjia@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 L:	netdev@vger.kernel.org
 S:	Supported
@ -16637,8 +16666,8 @@ F:	include/net/iucv/
 F:	net/iucv/

 S390 NETWORK DRIVERS
-M:	Julian Wiedmann <jwi@linux.ibm.com>
-M:	Karsten Graul <kgraul@linux.ibm.com>
+M:	Alexandra Winter <wintera@linux.ibm.com>
+M:	Wenjia Zhang <wenjia@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 L:	netdev@vger.kernel.org
 S:	Supported
@ -18498,6 +18527,7 @@ F:	include/uapi/linux/pkt_sched.h
 F:	include/uapi/linux/tc_act/
 F:	include/uapi/linux/tc_ematch/
 F:	net/sched/
+F:	tools/testing/selftests/tc-testing

 TC90522 MEDIA DRIVER
 M:	Akihiro Tsukada <tskd08@gmail.com>
@ -19046,11 +19076,12 @@ F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h

 TI KEYSTONE MULTICORE NAVIGATOR DRIVERS
+M:	Nishanth Menon <nm@ti.com>
 M:	Santosh Shilimkar <ssantosh@kernel.org>
 L:	linux-kernel@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
 F:	drivers/soc/ti/*

 TI LM49xxx FAMILY ASoC CODEC DRIVERS
@ -20334,7 +20365,8 @@ F:	arch/x86/include/asm/vmware.h
 F:	arch/x86/kernel/cpu/vmware.c

 VMWARE PVRDMA DRIVER
-M:	Adit Ranadive <aditr@vmware.com>
+M:	Bryan Tan <bryantan@vmware.com>
+M:	Vishnu Dasa <vdasa@vmware.com>
 M:	VMware PV-Drivers <pv-drivers@vmware.com>
 L:	linux-rdma@vger.kernel.org
 S:	Maintained
--- a/16
+++ b/16
@ -2,8 +2,8 @@
 VERSION = 5
 PATCHLEVEL = 16
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
-NAME = Trick or Treat
+EXTRAVERSION = -rc5
+NAME = Gobble Gobble

 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@ -789,7 +789,7 @@ stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG)      := -fstack-protector-strong
 KBUILD_CFLAGS += $(stackp-flags-y)

 KBUILD_CFLAGS-$(CONFIG_WERROR) += -Werror
-KBUILD_CFLAGS += $(KBUILD_CFLAGS-y) $(CONFIG_CC_IMPLICIT_FALLTHROUGH)
+KBUILD_CFLAGS += $(KBUILD_CFLAGS-y) $(CONFIG_CC_IMPLICIT_FALLTHROUGH:"%"=%)

 ifdef CONFIG_CC_IS_CLANG
 KBUILD_CPPFLAGS += -Qunused-arguments
@ -1374,17 +1374,17 @@ endif

 ifneq ($(dtstree),)

-%.dtb: dt_binding_check include/config/kernel.release scripts_dtc
-	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ $(dtstree)/$*.dt.yaml
+%.dtb: include/config/kernel.release scripts_dtc
+	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@

-%.dtbo: dt_binding_check include/config/kernel.release scripts_dtc
-	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ $(dtstree)/$*.dt.yaml
+%.dtbo: include/config/kernel.release scripts_dtc
+	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@

 PHONY += dtbs dtbs_install dtbs_check
 dtbs: include/config/kernel.release scripts_dtc
 	$(Q)$(MAKE) $(build)=$(dtstree)

-ifneq ($(filter dtbs_check %.dtb %.dtbo, $(MAKECMDGOALS)),)
+ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),)
 export CHECK_DTBS=y
 dtbs: dt_binding_check
 endif
--- a/arch/Kconfig
+++ b/arch/Kconfig
@ -991,6 +991,16 @@ config HAVE_ARCH_COMPAT_MMAP_BASES
 	  and vice-versa 32-bit applications to call 64-bit mmap().
 	  Required for applications doing different bitness syscalls.

+config PAGE_SIZE_LESS_THAN_64KB
+	def_bool y
+	depends on !ARM64_64K_PAGES
+	depends on !IA64_PAGE_SIZE_64KB
+	depends on !PAGE_SIZE_64KB
+	depends on !PARISC_PAGE_SIZE_64KB
+	depends on !PPC_64K_PAGES
+	depends on !PPC_256K_PAGES
+	depends on !PAGE_SIZE_256KB
+
 # This allows to use a set of generic functions to determine mmap base
 # address by giving priority to top-down scheme only if the process
 # is not in legacy mode (compat task, unlimited stack size or
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@ -488,3 +488,4 @@
 556	common	landlock_restrict_self		sys_landlock_restrict_self
 # 557 reserved for memfd_secret
 558	common	process_mrelease		sys_process_mrelease
+559	common  futex_waitv                     sys_futex_waitv
--- a/arch/arc/include/asm/cacheflush.h
+++ b/arch/arc/include/asm/cacheflush.h
@ -36,7 +36,6 @@ void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr);
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1

 void flush_dcache_page(struct page *page);
-void flush_dcache_folio(struct folio *folio);

 void dma_cache_wback_inv(phys_addr_t start, unsigned long sz);
 void dma_cache_inv(phys_addr_t start, unsigned long sz);
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -1463,6 +1463,7 @@ config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
 	select KMAP_LOCAL
+	select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@ -506,11 +506,17 @@
 			#address-cells = <3>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pcie", "msi";
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
 							IRQ_TYPE_LEVEL_HIGH>;
 			msi-controller;
 			msi-parent = <&pcie0>;
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@ -242,6 +242,8 @@

 			gpio-controller;
 			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};

 		pcie0: pcie@12000 {
@ -408,7 +410,7 @@
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-frequency = <100000>;
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@ -290,7 +290,6 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr
 */
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *);
-void flush_dcache_folio(struct folio *folio);

 #define ARCH_IMPLEMENTS_FLUSH_KERNEL_VMAP_RANGE 1
 static inline void flush_kernel_vmap_range(void *addr, int size)
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@ -33,7 +33,7 @@ extern void __iomem *sdr_ctl_base_addr;
 u32 socfpga_sdram_self_refresh(u32 sdr_base);
 extern unsigned int socfpga_sdram_self_refresh_sz;

-extern char secondary_trampoline, secondary_trampoline_end;
+extern char secondary_trampoline[], secondary_trampoline_end[];

 extern unsigned long socfpga_cpu1start_addr;

--- a/arch/arm/mach-socfpga/platsmp.c
+++ b/arch/arm/mach-socfpga/platsmp.c
@ -20,14 +20,14 @@

 static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;

 	if (socfpga_cpu1start_addr) {
 		/* This will put CPU #1 into reset. */
 		writel(RSTMGR_MPUMODRST_CPU1,
 		       rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);

-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);

 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
@ -45,12 +45,12 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)

 static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;

 	if (socfpga_cpu1start_addr) {
 		writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
 		       SOCFPGA_A10_RSTMGR_MODMPURST);
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);

 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@ -7,6 +7,7 @@
 * Copyright The Asahi Linux Contributors
 */

+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
@ -281,7 +282,7 @@
 			port00: pci@0,0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
-				reset-gpios = <&pinctrl_ap 152 0>;
+				reset-gpios = <&pinctrl_ap 152 GPIO_ACTIVE_LOW>;
 				max-link-speed = <2>;

 				#address-cells = <3>;
@ -301,7 +302,7 @@
 			port01: pci@1,0 {
 				device_type = "pci";
 				reg = <0x800 0x0 0x0 0x0 0x0>;
-				reset-gpios = <&pinctrl_ap 153 0>;
+				reset-gpios = <&pinctrl_ap 153 GPIO_ACTIVE_LOW>;
 				max-link-speed = <2>;

 				#address-cells = <3>;
@ -321,7 +322,7 @@
 			port02: pci@2,0 {
 				device_type = "pci";
 				reg = <0x1000 0x0 0x0 0x0 0x0>;
-				reset-gpios = <&pinctrl_ap 33 0>;
+				reset-gpios = <&pinctrl_ap 33 GPIO_ACTIVE_LOW>;
 				max-link-speed = <1>;

 				#address-cells = <3>;
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@ -296,8 +296,7 @@
 			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
 			phys = <&ufs_0_phy>;
 			phy-names = "ufs-phy";
-			samsung,sysreg = <&syscon_fsys2>;
-			samsung,ufs-shareability-reg-offset = <0x710>;
+			samsung,sysreg = <&syscon_fsys2 0x710>;
 			status = "disabled";
 		};
 	};
--- a/arch/arm64/include/asm/ftrace.h
+++ b/arch/arm64/include/asm/ftrace.h
@ -12,6 +12,17 @@

 #define HAVE_FUNCTION_GRAPH_FP_TEST

+/*
+ * HAVE_FUNCTION_GRAPH_RET_ADDR_PTR means that the architecture can provide a
+ * "return address pointer" which can be used to uniquely identify a return
+ * address which has been overwritten.
+ *
+ * On arm64 we use the address of the caller's frame record, which remains the
+ * same for the lifetime of the instrumented function, unlike the return
+ * address in the LR.
+ */
+#define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
+
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 #define ARCH_SUPPORTS_FTRACE_OPS 1
 #else
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@ -91,7 +91,7 @@
 #define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)

 /* TCR_EL2 Registers bits */
-#define TCR_EL2_RES1		((1 << 31) | (1 << 23))
+#define TCR_EL2_RES1		((1U << 31) | (1 << 23))
 #define TCR_EL2_TBI		(1 << 20)
 #define TCR_EL2_PS_SHIFT	16
 #define TCR_EL2_PS_MASK		(7 << TCR_EL2_PS_SHIFT)
@ -276,7 +276,7 @@
 #define CPTR_EL2_TFP_SHIFT 10

 /* Hyp Coprocessor Trap Register */
-#define CPTR_EL2_TCPAC	(1 << 31)
+#define CPTR_EL2_TCPAC	(1U << 31)
 #define CPTR_EL2_TAM	(1 << 30)
 #define CPTR_EL2_TTA	(1 << 20)
 #define CPTR_EL2_TFP	(1 << CPTR_EL2_TFP_SHIFT)
--- a/arch/arm64/include/asm/pgalloc.h
+++ b/arch/arm64/include/asm/pgalloc.h
@ -76,7 +76,7 @@ static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t ptep,
 static inline void
 pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
 {
-	VM_BUG_ON(mm != &init_mm);
+	VM_BUG_ON(mm && mm != &init_mm);
 	__pmd_populate(pmdp, __pa(ptep), PMD_TYPE_TABLE | PMD_TABLE_UXN);
 }

--- a/arch/arm64/include/asm/stacktrace.h
+++ b/arch/arm64/include/asm/stacktrace.h
@ -47,9 +47,6 @@ struct stack_info {
 * @prev_type:   The type of stack this frame record was on, or a synthetic
 *               value of STACK_TYPE_UNKNOWN. This is used to detect a
 *               transition from one stack to another.
- *
- * @graph:       When FUNCTION_GRAPH_TRACER is selected, holds the index of a
- *               replacement lr value in the ftrace graph stack.
 */
 struct stackframe {
 	unsigned long fp;
@ -57,9 +54,6 @@ struct stackframe {
 	DECLARE_BITMAP(stacks_done, __NR_STACK_TYPES);
 	unsigned long prev_fp;
 	enum stack_type prev_type;
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	int graph;
-#endif
 #ifdef CONFIG_KRETPROBES
 	struct llist_node *kr_cur;
 #endif
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@ -281,12 +281,22 @@ do {									\
 	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
 } while (0)

+/*
+ * We must not call into the scheduler between uaccess_ttbr0_enable() and
+ * uaccess_ttbr0_disable(). As `x` and `ptr` could contain blocking functions,
+ * we must evaluate these outside of the critical section.
+ */
 #define __raw_get_user(x, ptr, err)					\
 do {									\
+	__typeof__(*(ptr)) __user *__rgu_ptr = (ptr);			\
+	__typeof__(x) __rgu_val;					\
 	__chk_user_ptr(ptr);						\
+									\
 	uaccess_ttbr0_enable();						\
-	__raw_get_mem("ldtr", x, ptr, err);				\
+	__raw_get_mem("ldtr", __rgu_val, __rgu_ptr, err);		\
 	uaccess_ttbr0_disable();					\
+									\
+	(x) = __rgu_val;						\
 } while (0)

 #define __get_user_error(x, ptr, err)					\
@ -310,14 +320,22 @@ do {									\

 #define get_user	__get_user

+/*
+ * We must not call into the scheduler between __uaccess_enable_tco_async() and
+ * __uaccess_disable_tco_async(). As `dst` and `src` may contain blocking
+ * functions, we must evaluate these outside of the critical section.
+ */
 #define __get_kernel_nofault(dst, src, type, err_label)			\
 do {									\
+	__typeof__(dst) __gkn_dst = (dst);				\
+	__typeof__(src) __gkn_src = (src);				\
 	int __gkn_err = 0;						\
 									\
 	__uaccess_enable_tco_async();					\
-	__raw_get_mem("ldr", *((type *)(dst)),				\
-		      (__force type *)(src), __gkn_err);		\
+	__raw_get_mem("ldr", *((type *)(__gkn_dst)),			\
+		      (__force type *)(__gkn_src), __gkn_err);		\
 	__uaccess_disable_tco_async();					\
+									\
 	if (unlikely(__gkn_err))					\
 		goto err_label;						\
 } while (0)
@ -351,11 +369,19 @@ do {									\
 	}								\
 } while (0)

+/*
+ * We must not call into the scheduler between uaccess_ttbr0_enable() and
+ * uaccess_ttbr0_disable(). As `x` and `ptr` could contain blocking functions,
+ * we must evaluate these outside of the critical section.
+ */
 #define __raw_put_user(x, ptr, err)					\
 do {									\
-	__chk_user_ptr(ptr);						\
+	__typeof__(*(ptr)) __user *__rpu_ptr = (ptr);			\
+	__typeof__(*(ptr)) __rpu_val = (x);				\
+	__chk_user_ptr(__rpu_ptr);					\
+									\
 	uaccess_ttbr0_enable();						\
-	__raw_put_mem("sttr", x, ptr, err);				\
+	__raw_put_mem("sttr", __rpu_val, __rpu_ptr, err);		\
 	uaccess_ttbr0_disable();					\
 } while (0)

@ -380,14 +406,22 @@ do {									\

 #define put_user	__put_user

+/*
+ * We must not call into the scheduler between __uaccess_enable_tco_async() and
+ * __uaccess_disable_tco_async(). As `dst` and `src` may contain blocking
+ * functions, we must evaluate these outside of the critical section.
+ */
 #define __put_kernel_nofault(dst, src, type, err_label)			\
 do {									\
+	__typeof__(dst) __pkn_dst = (dst);				\
+	__typeof__(src) __pkn_src = (src);				\
 	int __pkn_err = 0;						\
 									\
 	__uaccess_enable_tco_async();					\
-	__raw_put_mem("str", *((type *)(src)),				\
-		      (__force type *)(dst), __pkn_err);		\
+	__raw_put_mem("str", *((type *)(__pkn_src)),			\
+		      (__force type *)(__pkn_dst), __pkn_err);		\
 	__uaccess_disable_tco_async();					\
+									\
 	if (unlikely(__pkn_err))					\
 		goto err_label;						\
 } while(0)
--- a/arch/arm64/kernel/entry-ftrace.S
+++ b/arch/arm64/kernel/entry-ftrace.S
@ -77,11 +77,17 @@
 	.endm

 SYM_CODE_START(ftrace_regs_caller)
+#ifdef BTI_C
+	BTI_C
+#endif
 	ftrace_regs_entry	1
 	b	ftrace_common
 SYM_CODE_END(ftrace_regs_caller)

 SYM_CODE_START(ftrace_caller)
+#ifdef BTI_C
+	BTI_C
+#endif
 	ftrace_regs_entry	0
 	b	ftrace_common
 SYM_CODE_END(ftrace_caller)
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@ -244,8 +244,6 @@ void arch_ftrace_update_code(int command)
 * on the way back to parent. For this purpose, this function is called
 * in _mcount() or ftrace_caller() to replace return address (*parent) on
 * the call stack to return_to_handler.
- *
- * Note that @frame_pointer is used only for sanity check later.
 */
 void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
 			   unsigned long frame_pointer)
@ -263,8 +261,10 @@ void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
 	 */
 	old = *parent;

-	if (!function_graph_enter(old, self_addr, frame_pointer, NULL))
+	if (!function_graph_enter(old, self_addr, frame_pointer,
+	    (void *)frame_pointer)) {
 		*parent = return_hooker;
+	}
 }

 #ifdef CONFIG_DYNAMIC_FTRACE
--- a/arch/arm64/kernel/machine_kexec.c
+++ b/arch/arm64/kernel/machine_kexec.c
@ -147,7 +147,7 @@ int machine_kexec_post_load(struct kimage *kimage)
 	if (rc)
 		return rc;
 	kimage->arch.ttbr1 = __pa(trans_pgd);
-	kimage->arch.zero_page = __pa(empty_zero_page);
+	kimage->arch.zero_page = __pa_symbol(empty_zero_page);

 	reloc_size = __relocate_new_kernel_end - __relocate_new_kernel_start;
 	memcpy(reloc_code, __relocate_new_kernel_start, reloc_size);
--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@ -38,9 +38,6 @@ void start_backtrace(struct stackframe *frame, unsigned long fp,
 {
 	frame->fp = fp;
 	frame->pc = pc;
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	frame->graph = 0;
-#endif
 #ifdef CONFIG_KRETPROBES
 	frame->kr_cur = NULL;
 #endif
@ -116,20 +113,23 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
 	frame->prev_fp = fp;
 	frame->prev_type = info.type;

+	frame->pc = ptrauth_strip_insn_pac(frame->pc);
+
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	if (tsk->ret_stack &&
-		(ptrauth_strip_insn_pac(frame->pc) == (unsigned long)return_to_handler)) {
-		struct ftrace_ret_stack *ret_stack;
+		(frame->pc == (unsigned long)return_to_handler)) {
+		unsigned long orig_pc;
 		/*
 		 * This is a case where function graph tracer has
 		 * modified a return address (LR) in a stack frame
 		 * to hook a function return.
 		 * So replace it to an original value.
 		 */
-		ret_stack = ftrace_graph_get_ret_stack(tsk, frame->graph++);
-		if (WARN_ON_ONCE(!ret_stack))
+		orig_pc = ftrace_graph_ret_addr(tsk, NULL, frame->pc,
+						(void *)frame->fp);
+		if (WARN_ON_ONCE(frame->pc == orig_pc))
 			return -EINVAL;
-		frame->pc = ret_stack->ret;
+		frame->pc = orig_pc;
 	}
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 #ifdef CONFIG_KRETPROBES
@ -137,8 +137,6 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
 		frame->pc = kretprobe_find_ret_addr(tsk, (void *)frame->fp, &frame->kr_cur);
 #endif

-	frame->pc = ptrauth_strip_insn_pac(frame->pc);
-
 	return 0;
 }
 NOKPROBE_SYMBOL(unwind_frame);
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@ -223,7 +223,14 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = 1;
 		break;
 	case KVM_CAP_NR_VCPUS:
-		r = num_online_cpus();
+		/*
+		 * ARM64 treats KVM_CAP_NR_CPUS differently from all other
+		 * architectures, as it does not always bound it to
+		 * KVM_CAP_MAX_VCPUS. It should not matter much because
+		 * this is just an advisory value.
+		 */
+		r = min_t(unsigned int, num_online_cpus(),
+			  kvm_arm_default_max_vcpus());
 		break;
 	case KVM_CAP_MAX_VCPUS:
 	case KVM_CAP_MAX_VCPU_ID:
--- a/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ b/arch/arm64/kvm/hyp/include/hyp/switch.h
@ -403,6 +403,8 @@ typedef bool (*exit_handler_fn)(struct kvm_vcpu *, u64 *);

 static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu);

+static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code);
+
 /*
 * Allow the hypervisor to handle the exit with an exit handler if it has one.
 *
@ -429,6 +431,18 @@ static inline bool kvm_hyp_handle_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 */
 static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
+	/*
+	 * Save PSTATE early so that we can evaluate the vcpu mode
+	 * early on.
+	 */
+	vcpu->arch.ctxt.regs.pstate = read_sysreg_el2(SYS_SPSR);
+
+	/*
+	 * Check whether we want to repaint the state one way or
+	 * another.
+	 */
+	early_exit_filter(vcpu, exit_code);
+
 	if (ARM_EXCEPTION_CODE(*exit_code) != ARM_EXCEPTION_IRQ)
 		vcpu->arch.fault.esr_el2 = read_sysreg_el2(SYS_ESR);

--- a/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
+++ b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
@ -70,7 +70,12 @@ static inline void __sysreg_save_el1_state(struct kvm_cpu_context *ctxt)
 static inline void __sysreg_save_el2_return_state(struct kvm_cpu_context *ctxt)
 {
 	ctxt->regs.pc			= read_sysreg_el2(SYS_ELR);
-	ctxt->regs.pstate		= read_sysreg_el2(SYS_SPSR);
+	/*
+	 * Guest PSTATE gets saved at guest fixup time in all
+	 * cases. We still need to handle the nVHE host side here.
+	 */
+	if (!has_vhe() && ctxt->__hyp_running_vcpu)
+		ctxt->regs.pstate	= read_sysreg_el2(SYS_SPSR);

 	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN))
 		ctxt_sys_reg(ctxt, DISR_EL1) = read_sysreg_s(SYS_VDISR_EL2);
--- a/arch/arm64/kvm/hyp/nvhe/switch.c
+++ b/arch/arm64/kvm/hyp/nvhe/switch.c
@ -233,7 +233,7 @@ static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu)
 * Returns false if the guest ran in AArch32 when it shouldn't have, and
 * thus should exit to the host, or true if a the guest run loop can continue.
 */
-static bool handle_aarch32_guest(struct kvm_vcpu *vcpu, u64 *exit_code)
+static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
 	struct kvm *kvm = kern_hyp_va(vcpu->kvm);

@ -248,10 +248,7 @@ static bool handle_aarch32_guest(struct kvm_vcpu *vcpu, u64 *exit_code)
 		vcpu->arch.target = -1;
 		*exit_code &= BIT(ARM_EXIT_WITH_SERROR_BIT);
 		*exit_code |= ARM_EXCEPTION_IL;
-		return false;
 	}
-
-	return true;
 }

 /* Switch to the guest for legacy non-VHE systems */
@ -316,9 +313,6 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 		/* Jump in the fire! */
 		exit_code = __guest_enter(vcpu);

-		if (unlikely(!handle_aarch32_guest(vcpu, &exit_code)))
-			break;
-
 		/* And we're baaack! */
 	} while (fixup_guest_exit(vcpu, &exit_code));

--- a/arch/arm64/kvm/hyp/vhe/switch.c
+++ b/arch/arm64/kvm/hyp/vhe/switch.c
@ -112,6 +112,10 @@ static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu)
 	return hyp_exit_handlers;
 }

+static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+}
+
 /* Switch to the guest for VHE systems running in EL2 */
 static int __kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
 {
--- a/arch/csky/kernel/traps.c
+++ b/arch/csky/kernel/traps.c
@ -209,7 +209,7 @@ asmlinkage void do_trap_illinsn(struct pt_regs *regs)

 asmlinkage void do_trap_fpe(struct pt_regs *regs)
 {
-#ifdef CONFIG_CPU_HAS_FP
+#ifdef CONFIG_CPU_HAS_FPU
 	return fpu_fpe(regs);
 #else
 	do_trap_error(regs, SIGILL, ILL_ILLOPC, regs->pc,
@ -219,7 +219,7 @@ asmlinkage void do_trap_fpe(struct pt_regs *regs)

 asmlinkage void do_trap_priv(struct pt_regs *regs)
 {
-#ifdef CONFIG_CPU_HAS_FP
+#ifdef CONFIG_CPU_HAS_FPU
 	if (user_mode(regs) && fpu_libc_helper(regs))
 		return;
 #endif
--- a/arch/hexagon/include/asm/timer-regs.h
+++ b/arch/hexagon/include/asm/timer-regs.h
@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Timer support for Hexagon
- *
- * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _ASM_TIMER_REGS_H
-#define _ASM_TIMER_REGS_H
-
-/*  This stuff should go into a platform specific file  */
-#define TCX0_CLK_RATE		19200
-#define TIMER_ENABLE		0
-#define TIMER_CLR_ON_MATCH	1
-
-/*
- * 8x50 HDD Specs 5-8.  Simulator co-sim not fixed until
- * release 1.1, and then it's "adjustable" and probably not defaulted.
- */
-#define RTOS_TIMER_INT		3
-#ifdef CONFIG_HEXAGON_COMET
-#define RTOS_TIMER_REGS_ADDR	0xAB000000UL
-#endif
-#define SLEEP_CLK_RATE		32000
-
-#endif
--- a/arch/hexagon/include/asm/timex.h
+++ b/arch/hexagon/include/asm/timex.h
@ -7,11 +7,10 @@
 #define _ASM_TIMEX_H

 #include <asm-generic/timex.h>
-#include <asm/timer-regs.h>
 #include <asm/hexagon_vm.h>

 /* Using TCX0 as our clock.  CLOCK_TICK_RATE scheduled to be removed. */
-#define CLOCK_TICK_RATE              TCX0_CLK_RATE
+#define CLOCK_TICK_RATE              19200

 #define ARCH_HAS_READ_CURRENT_TIMER

--- a/arch/hexagon/kernel/.gitignore
+++ b/arch/hexagon/kernel/.gitignore
@ -0,0 +1 @@
+vmlinux.lds
--- a/arch/hexagon/kernel/time.c
+++ b/arch/hexagon/kernel/time.c
@ -17,9 +17,10 @@
 #include <linux/of_irq.h>
 #include <linux/module.h>

-#include <asm/timer-regs.h>
 #include <asm/hexagon_vm.h>

+#define TIMER_ENABLE		BIT(0)
+
 /*
 * For the clocksource we need:
 *	pcycle frequency (600MHz)
@ -33,6 +34,13 @@ cycles_t	pcycle_freq_mhz;
 cycles_t	thread_freq_mhz;
 cycles_t	sleep_clk_freq;

+/*
+ * 8x50 HDD Specs 5-8.  Simulator co-sim not fixed until
+ * release 1.1, and then it's "adjustable" and probably not defaulted.
+ */
+#define RTOS_TIMER_INT		3
+#define RTOS_TIMER_REGS_ADDR	0xAB000000UL
+
 static struct resource rtos_timer_resources[] = {
 	{
 		.start	= RTOS_TIMER_REGS_ADDR,
@ -80,7 +88,7 @@ static int set_next_event(unsigned long delta, struct clock_event_device *evt)
 	iowrite32(0, &rtos_timer->clear);

 	iowrite32(delta, &rtos_timer->match);
-	iowrite32(1 << TIMER_ENABLE, &rtos_timer->enable);
+	iowrite32(TIMER_ENABLE, &rtos_timer->enable);
 	return 0;
 }

--- a/arch/hexagon/lib/io.c
+++ b/arch/hexagon/lib/io.c
@ -27,6 +27,7 @@ void __raw_readsw(const void __iomem *addr, void *data, int len)
 		*dst++ = *src;

 }
+EXPORT_SYMBOL(__raw_readsw);

 /*
 * __raw_writesw - read words a short at a time
@ -47,6 +48,7 @@ void __raw_writesw(void __iomem *addr, const void *data, int len)


 }
+EXPORT_SYMBOL(__raw_writesw);

 /*  Pretty sure len is pre-adjusted for the length of the access already */
 void __raw_readsl(const void __iomem *addr, void *data, int len)
@ -62,6 +64,7 @@ void __raw_readsl(const void __iomem *addr, void *data, int len)


 }
+EXPORT_SYMBOL(__raw_readsl);

 void __raw_writesl(void __iomem *addr, const void *data, int len)
 {
@ -76,3 +79,4 @@ void __raw_writesl(void __iomem *addr, const void *data, int len)


 }
+EXPORT_SYMBOL(__raw_writesl);
--- a/arch/ia64/kernel/syscalls/syscall.tbl
+++ b/arch/ia64/kernel/syscalls/syscall.tbl
@ -369,3 +369,4 @@
 446	common	landlock_restrict_self		sys_landlock_restrict_self
 # 447 reserved for memfd_secret
 448	common	process_mrelease		sys_process_mrelease
+449	common  futex_waitv                     sys_futex_waitv
--- a/arch/m68k/include/asm/cacheflush_mm.h
+++ b/arch/m68k/include/asm/cacheflush_mm.h
@ -250,7 +250,6 @@ static inline void __flush_page_to_ram(void *vaddr)

 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 #define flush_dcache_page(page)		__flush_page_to_ram(page_address(page))
-void flush_dcache_folio(struct folio *folio);
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 #define flush_icache_page(vma, page)	__flush_page_to_ram(page_address(page))
--- a/arch/m68k/kernel/syscalls/syscall.tbl
+++ b/arch/m68k/kernel/syscalls/syscall.tbl
@ -448,3 +448,4 @@
 446	common	landlock_restrict_self		sys_landlock_restrict_self
 # 447 reserved for memfd_secret
 448	common	process_mrelease		sys_process_mrelease
+449	common  futex_waitv                     sys_futex_waitv
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@ -1145,7 +1145,7 @@ asmlinkage void set_esp0(unsigned long ssp)
 */
 asmlinkage void fpsp040_die(void)
 {
-	force_fatal_sig(SIGSEGV);
+	force_exit_sig(SIGSEGV);
 }

 #ifdef CONFIG_M68KFPU_EMU
--- a/arch/microblaze/kernel/syscalls/syscall.tbl
+++ b/arch/microblaze/kernel/syscalls/syscall.tbl
@ -454,3 +454,4 @@
 446	common	landlock_restrict_self		sys_landlock_restrict_self
 # 447 reserved for memfd_secret
 448	common	process_mrelease		sys_process_mrelease
+449	common  futex_waitv                     sys_futex_waitv
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@ -3097,7 +3097,7 @@ config STACKTRACE_SUPPORT
 config PGTABLE_LEVELS
 	int
 	default 4 if PAGE_SIZE_4KB && MIPS_VA_BITS_48
-	default 3 if 64BIT && !PAGE_SIZE_64KB
+	default 3 if 64BIT && (!PAGE_SIZE_64KB || MIPS_VA_BITS_48)
 	default 2

 config MIPS_AUTO_PFN_OFFSET
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@ -381,6 +381,12 @@ void clk_disable(struct clk *clk)

 EXPORT_SYMBOL(clk_disable);

+struct clk *clk_get_parent(struct clk *clk)
+{
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
 unsigned long clk_get_rate(struct clk *clk)
 {
 	if (!clk)
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@ -52,7 +52,7 @@ endif

 vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o

-vmlinuzobjs-$(CONFIG_KERNEL_ZSTD) += $(obj)/bswapdi.o
+vmlinuzobjs-$(CONFIG_KERNEL_ZSTD) += $(obj)/bswapdi.o $(obj)/ashldi3.o

 targets := $(notdir $(vmlinuzobjs-y))

--- a/arch/mips/generic/yamon-dt.c
+++ b/arch/mips/generic/yamon-dt.c
@ -75,7 +75,7 @@ static unsigned int __init gen_fdt_mem_array(
 __init int yamon_dt_append_memory(void *fdt,
 				  const struct yamon_mem_region *regions)
 {
-	unsigned long phys_memsize, memsize;
+	unsigned long phys_memsize = 0, memsize;
 	__be32 mem_array[2 * MAX_MEM_ARRAY_ENTRIES];
 	unsigned int mem_entries;
 	int i, err, mem_off;
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@ -61,8 +61,6 @@ static inline void flush_dcache_page(struct page *page)
 		SetPageDcacheDirty(page);
 }

-void flush_dcache_folio(struct folio *folio);
-
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)

--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@ -1734,8 +1734,6 @@ static inline void decode_cpucfg(struct cpuinfo_mips *c)

 static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
 {
-	decode_configs(c);
-
 	/* All Loongson processors covered here define ExcCode 16 as GSExc. */
 	c->options |= MIPS_CPU_GSEXCEX;

@ -1796,6 +1794,8 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
 		panic("Unknown Loongson Processor ID!");
 		break;
 	}
+
+	decode_configs(c);
 }
 #else
 static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { }
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@ -185,7 +185,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		seq_puts(m, " tx39_cache");
 	if (cpu_has_octeon_cache)
 		seq_puts(m, " octeon_cache");
-	if (cpu_has_fpu)
+	if (raw_cpu_has_fpu)
 		seq_puts(m, " fpu");
 	if (cpu_has_32fpr)
 		seq_puts(m, " 32fpr");
--- a/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n32.tbl
@ -387,3 +387,4 @@
 446	n32	landlock_restrict_self		sys_landlock_restrict_self
 # 447 reserved for memfd_secret
 448	n32	process_mrelease		sys_process_mrelease
+449	n32	futex_waitv			sys_futex_waitv
--- a/arch/mips/kernel/syscalls/syscall_n64.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n64.tbl
@ -363,3 +363,4 @@
 446	n64	landlock_restrict_self		sys_landlock_restrict_self
 # 447 reserved for memfd_secret
 448	n64	process_mrelease		sys_process_mrelease
+449	n64	futex_waitv			sys_futex_waitv
--- a/arch/mips/kernel/syscalls/syscall_o32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_o32.tbl
@ -436,3 +436,4 @@
 446	o32	landlock_restrict_self		sys_landlock_restrict_self
 # 447 reserved for memfd_secret
 448	o32	process_mrelease		sys_process_mrelease
+449	o32	futex_waitv			sys_futex_waitv
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@ -1067,7 +1067,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = 1;
 		break;
 	case KVM_CAP_NR_VCPUS:
-		r = num_online_cpus();
+		r = min_t(unsigned int, num_online_cpus(), KVM_MAX_VCPUS);
 		break;
 	case KVM_CAP_MAX_VCPUS:
 		r = KVM_MAX_VCPUS;
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@ -158,6 +158,12 @@ void clk_deactivate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_deactivate);

+struct clk *clk_get_parent(struct clk *clk)
+{
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
 static inline u32 get_counter_resolution(void)
 {
 	u32 res;
--- a/arch/mips/net/bpf_jit_comp.h
+++ b/arch/mips/net/bpf_jit_comp.h
@ -98,7 +98,7 @@ do {								\
 #define emit(...) __emit(__VA_ARGS__)

 /* Workaround for R10000 ll/sc errata */
-#ifdef CONFIG_WAR_R10000
+#ifdef CONFIG_WAR_R10000_LLSC
 #define LLSC_beqz	beqzl
 #else
 #define LLSC_beqz	beqz
--- a/arch/nds32/include/asm/cacheflush.h
+++ b/arch/nds32/include/asm/cacheflush.h
@ -27,7 +27,6 @@ void flush_cache_vunmap(unsigned long start, unsigned long end);

 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 void flush_dcache_page(struct page *page);
-void flush_dcache_folio(struct folio *folio);
 void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 		       unsigned long vaddr, void *dst, void *src, int len);
 void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
--- a/arch/nios2/include/asm/cacheflush.h
+++ b/arch/nios2/include/asm/cacheflush.h
@ -29,7 +29,6 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr,
 	unsigned long pfn);
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 void flush_dcache_page(struct page *page);
-void flush_dcache_folio(struct folio *folio);

 extern void flush_icache_range(unsigned long start, unsigned long end);
 extern void flush_icache_page(struct vm_area_struct *vma, struct page *page);
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@ -15,7 +15,12 @@
 # Mike Shaver, Helge Deller and Martin K. Petersen
 #

+ifdef CONFIG_PARISC_SELF_EXTRACT
+boot := arch/parisc/boot
+KBUILD_IMAGE := $(boot)/bzImage
+else
 KBUILD_IMAGE := vmlinuz
+endif

 NM		= sh $(srctree)/arch/parisc/nm
 CHECKFLAGS	+= -D__hppa__=1
--- a/arch/parisc/configs/generic-32bit_defconfig
+++ b/arch/parisc/configs/generic-32bit_defconfig
@ -231,6 +231,7 @@ CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC_T10DIF=y
 CONFIG_FONTS=y
+CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_MEMORY_INIT=y
--- a/arch/parisc/configs/generic-64bit_defconfig
+++ b/arch/parisc/configs/generic-64bit_defconfig
@ -1,7 +1,9 @@
 CONFIG_LOCALVERSION="-64bit"
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZ4=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
@ -35,6 +37,7 @@ CONFIG_MODVERSIONS=y
 CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_COMPACTION is not set
+CONFIG_MEMORY_FAILURE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@ -65,12 +68,15 @@ CONFIG_SCSI_ISCSI_ATTRS=y
 CONFIG_SCSI_SRP_ATTRS=y
 CONFIG_ISCSI_BOOT_SYSFS=y
 CONFIG_SCSI_MPT2SAS=y
-CONFIG_SCSI_LASI700=m
+CONFIG_SCSI_LASI700=y
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_ZALON=y
 CONFIG_SCSI_QLA_ISCSI=m
 CONFIG_SCSI_DH=y
 CONFIG_ATA=y
+CONFIG_SATA_SIL=y
+CONFIG_SATA_SIS=y
+CONFIG_SATA_VIA=y
 CONFIG_PATA_NS87415=y
 CONFIG_PATA_SIL680=y
 CONFIG_ATA_GENERIC=y
@ -79,6 +85,7 @@ CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_RAID=m
 CONFIG_DM_UEVENT=y
+CONFIG_DM_AUDIT=y
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_SAS=y
@ -196,10 +203,15 @@ CONFIG_FB_MATROX_G=y
 CONFIG_FB_MATROX_I2C=y
 CONFIG_FB_MATROX_MAVEN=y
 CONFIG_FB_RADEON=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_HIDRAW=y
 CONFIG_HID_PID=y
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=m
 CONFIG_UIO_AEC=m
--- a/arch/parisc/include/asm/assembly.h
+++ b/arch/parisc/include/asm/assembly.h
@ -3,38 +3,19 @@
 * Copyright (C) 1999 Hewlett-Packard (Frank Rowand)
 * Copyright (C) 1999 Philipp Rumpf <prumpf@tux.org>
 * Copyright (C) 1999 SuSE GmbH
+ * Copyright (C) 2021 Helge Deller <deller@gmx.de>
 */

 #ifndef _PARISC_ASSEMBLY_H
 #define _PARISC_ASSEMBLY_H

-#define CALLEE_FLOAT_FRAME_SIZE	80
-
 #ifdef CONFIG_64BIT
-#define LDREG	ldd
-#define STREG	std
-#define LDREGX  ldd,s
-#define LDREGM	ldd,mb
-#define STREGM	std,ma
-#define SHRREG	shrd
-#define SHLREG	shld
-#define ANDCM   andcm,*
-#define	COND(x)	* ## x
 #define RP_OFFSET	16
 #define FRAME_SIZE	128
 #define CALLEE_REG_FRAME_SIZE	144
 #define REG_SZ		8
 #define ASM_ULONG_INSN	.dword
 #else	/* CONFIG_64BIT */
-#define LDREG	ldw
-#define STREG	stw
-#define LDREGX  ldwx,s
-#define LDREGM	ldwm
-#define STREGM	stwm
-#define SHRREG	shr
-#define SHLREG	shlw
-#define ANDCM   andcm
-#define COND(x)	x
 #define RP_OFFSET	20
 #define FRAME_SIZE	64
 #define CALLEE_REG_FRAME_SIZE	128
@ -45,6 +26,7 @@
 /* Frame alignment for 32- and 64-bit */
 #define FRAME_ALIGN     64

+#define CALLEE_FLOAT_FRAME_SIZE	80
 #define CALLEE_SAVE_FRAME_SIZE (CALLEE_REG_FRAME_SIZE + CALLEE_FLOAT_FRAME_SIZE)

 #ifdef CONFIG_PA20
@ -67,6 +49,28 @@

 #ifdef __ASSEMBLY__

+#ifdef CONFIG_64BIT
+#define LDREG	ldd
+#define STREG	std
+#define LDREGX  ldd,s
+#define LDREGM	ldd,mb
+#define STREGM	std,ma
+#define SHRREG	shrd
+#define SHLREG	shld
+#define ANDCM   andcm,*
+#define	COND(x)	* ## x
+#else	/* CONFIG_64BIT */
+#define LDREG	ldw
+#define STREG	stw
+#define LDREGX  ldwx,s
+#define LDREGM	ldwm
+#define STREGM	stwm
+#define SHRREG	shr
+#define SHLREG	shlw
+#define ANDCM   andcm
+#define COND(x)	x
+#endif
+
 #ifdef CONFIG_64BIT
 /* the 64-bit pa gnu assembler unfortunately defaults to .level 1.1 or 2.0 so
 * work around that for now... */
@ -143,6 +147,17 @@
 	extrd,u \r, 63-(\sa), 64-(\sa), \t
 	.endm

+	/* Extract unsigned for 32- and 64-bit
+	 * The extru instruction leaves the most significant 32 bits of the
+	 * target register in an undefined state on PA 2.0 systems. */
+	.macro extru_safe r, p, len, t
+#ifdef CONFIG_64BIT
+	extrd,u	\r, 32+(\p), \len, \t
+#else
+	extru	\r, \p, \len, \t
+#endif
+	.endm
+
 	/* load 32-bit 'value' into 'reg' compensating for the ldil
 	 * sign-extension when running in wide mode.
 	 * WARNING!! neither 'value' nor 'reg' can be expressions
--- a/arch/parisc/include/asm/cacheflush.h
+++ b/arch/parisc/include/asm/cacheflush.h
@ -50,7 +50,6 @@ void invalidate_kernel_vmap_range(void *vaddr, int size);

 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 void flush_dcache_page(struct page *page);
-void flush_dcache_folio(struct folio *folio);

 #define flush_dcache_mmap_lock(mapping)		xa_lock_irq(&mapping->i_pages)
 #define flush_dcache_mmap_unlock(mapping)	xa_unlock_irq(&mapping->i_pages)
--- a/arch/parisc/include/asm/jump_label.h
+++ b/arch/parisc/include/asm/jump_label.h
@ -5,6 +5,7 @@
 #ifndef __ASSEMBLY__

 #include <linux/types.h>
+#include <linux/stringify.h>
 #include <asm/assembly.h>

 #define JUMP_LABEL_NOP_SIZE 4
--- a/arch/parisc/include/asm/rt_sigframe.h
+++ b/arch/parisc/include/asm/rt_sigframe.h
@ -2,7 +2,7 @@
 #ifndef _ASM_PARISC_RT_SIGFRAME_H
 #define _ASM_PARISC_RT_SIGFRAME_H

-#define SIGRETURN_TRAMP 3
+#define SIGRETURN_TRAMP 4
 #define SIGRESTARTBLOCK_TRAMP 5 
 #define TRAMP_SIZE (SIGRETURN_TRAMP + SIGRESTARTBLOCK_TRAMP)

--- a/arch/parisc/install.sh
+++ b/arch/parisc/install.sh
@ -39,6 +39,7 @@ verify "$3"
 if [ -n "${INSTALLKERNEL}" ]; then
  if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
  if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
+  if [ -x /usr/sbin/${INSTALLKERNEL} ]; then exec /usr/sbin/${INSTALLKERNEL} "$@"; fi
 fi

 # Default install
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@ -366,17 +366,9 @@
 	 */
 	.macro		L2_ptep	pmd,pte,index,va,fault
 #if CONFIG_PGTABLE_LEVELS == 3
-	extru		\va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index
+	extru_safe	\va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index
 #else
-# if defined(CONFIG_64BIT)
-	extrd,u		\va,63-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index
-  #else
-  # if PAGE_SIZE > 4096
-	extru		\va,31-ASM_PGDIR_SHIFT,32-ASM_PGDIR_SHIFT,\index
-  # else
-	extru		\va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index
-  # endif
-# endif
+	extru_safe	\va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index
 #endif
 	dep             %r0,31,PAGE_SHIFT,\pmd  /* clear offset */
 #if CONFIG_PGTABLE_LEVELS < 3
@ -386,7 +378,7 @@
 	bb,>=,n		\pmd,_PxD_PRESENT_BIT,\fault
 	dep		%r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
 	SHLREG		\pmd,PxD_VALUE_SHIFT,\pmd
-	extru		\va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index
+	extru_safe	\va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index
 	dep		%r0,31,PAGE_SHIFT,\pmd  /* clear offset */
 	shladd		\index,BITS_PER_PTE_ENTRY,\pmd,\pmd /* pmd is now pte */
 	.endm
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@ -288,21 +288,22 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 	   already in userspace. The first words of tramp are used to
 	   save the previous sigrestartblock trampoline that might be
 	   on the stack. We start the sigreturn trampoline at 
-	   SIGRESTARTBLOCK_TRAMP. */
+	   SIGRESTARTBLOCK_TRAMP+X. */
 	err |= __put_user(in_syscall ? INSN_LDI_R25_1 : INSN_LDI_R25_0,
 			&frame->tramp[SIGRESTARTBLOCK_TRAMP+0]);
-	err |= __put_user(INSN_BLE_SR2_R0, 
+	err |= __put_user(INSN_LDI_R20, 
 			&frame->tramp[SIGRESTARTBLOCK_TRAMP+1]);
-	err |= __put_user(INSN_LDI_R20,
+	err |= __put_user(INSN_BLE_SR2_R0, 
 			&frame->tramp[SIGRESTARTBLOCK_TRAMP+2]);
+	err |= __put_user(INSN_NOP, &frame->tramp[SIGRESTARTBLOCK_TRAMP+3]);

-	start = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP+0];
-	end = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP+3];
+	start = (unsigned long) &frame->tramp[0];
+	end = (unsigned long) &frame->tramp[TRAMP_SIZE];
 	flush_user_dcache_range_asm(start, end);
 	flush_user_icache_range_asm(start, end);

 	/* TRAMP Words 0-4, Length 5 = SIGRESTARTBLOCK_TRAMP
-	 * TRAMP Words 5-7, Length 3 = SIGRETURN_TRAMP
+	 * TRAMP Words 5-9, Length 4 = SIGRETURN_TRAMP
 	 * So the SIGRETURN_TRAMP is at the end of SIGRESTARTBLOCK_TRAMP
 	 */
 	rp = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP];
--- a/arch/parisc/kernel/signal32.h
+++ b/arch/parisc/kernel/signal32.h
@ -36,7 +36,7 @@ struct compat_regfile {
        compat_int_t rf_sar;
 };

-#define COMPAT_SIGRETURN_TRAMP 3
+#define COMPAT_SIGRETURN_TRAMP 4
 #define COMPAT_SIGRESTARTBLOCK_TRAMP 5
 #define COMPAT_TRAMP_SIZE (COMPAT_SIGRETURN_TRAMP + \
 				COMPAT_SIGRESTARTBLOCK_TRAMP)
--- a/Show More
+++ b/Show More