mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 21:38:32 +08:00
phy: usb: Restructure in preparation for adding 7216 USB support
The driver is being restructured in preparation for adding support for the new Synopsys USB conroller on the 7216. Since all the bugs and work-arounds in previous STB chips are supposed to be fixed, most of the code in phy-brcm-usb-init.c is not needed. Instead of adding more complexity to the already complicated phy-brcm-usb-init.c module, the driver will be restructured to use a vector table to dispatch into different C modules for the different controllers. There was also some general cleanup done including some ipp setup code that was incorrect. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Al Cooper
Kishon Vijay Abraham I
parent
f1c0db40a3
commit
94583a4104
@ -129,10 +129,6 @@ enum {
|
||||
USB_CTRL_SELECTOR_COUNT,
|
||||
};
|
||||
|
||||
#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg)
|
||||
#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg)
|
||||
#define USB_CTRL_MASK(reg, field) \
|
||||
USB_CTRL_##reg##_##field##_MASK
|
||||
#define USB_CTRL_MASK_FAMILY(params, reg, field) \
|
||||
(params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR])
|
||||
|
||||
@ -143,13 +139,6 @@ enum {
|
||||
usb_ctrl_unset_family(params, USB_CTRL_##reg, \
|
||||
USB_CTRL_##reg##_##field##_SELECTOR)
|
||||
|
||||
#define USB_CTRL_SET(base, reg, field) \
|
||||
usb_ctrl_set(USB_CTRL_REG(base, reg), \
|
||||
USB_CTRL_##reg##_##field##_MASK)
|
||||
#define USB_CTRL_UNSET(base, reg, field) \
|
||||
usb_ctrl_unset(USB_CTRL_REG(base, reg), \
|
||||
USB_CTRL_##reg##_##field##_MASK)
|
||||
|
||||
#define MDIO_USB2 0
|
||||
#define MDIO_USB3 BIT(31)
|
||||
|
||||
@ -405,26 +394,14 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
|
||||
},
|
||||
};
|
||||
|
||||
static inline u32 brcmusb_readl(void __iomem *addr)
|
||||
{
|
||||
return readl(addr);
|
||||
}
|
||||
|
||||
static inline void brcmusb_writel(u32 val, void __iomem *addr)
|
||||
{
|
||||
writel(val, addr);
|
||||
}
|
||||
|
||||
static inline
|
||||
void usb_ctrl_unset_family(struct brcm_usb_init_params *params,
|
||||
u32 reg_offset, u32 field)
|
||||
{
|
||||
u32 mask;
|
||||
void __iomem *reg;
|
||||
|
||||
mask = params->usb_reg_bits_map[field];
|
||||
reg = params->ctrl_regs + reg_offset;
|
||||
brcmusb_writel(brcmusb_readl(reg) & ~mask, reg);
|
||||
brcm_usb_ctrl_unset(params->ctrl_regs + reg_offset, mask);
|
||||
};
|
||||
|
||||
static inline
|
||||
@ -432,45 +409,27 @@ void usb_ctrl_set_family(struct brcm_usb_init_params *params,
|
||||
u32 reg_offset, u32 field)
|
||||
{
|
||||
u32 mask;
|
||||
void __iomem *reg;
|
||||
|
||||
mask = params->usb_reg_bits_map[field];
|
||||
reg = params->ctrl_regs + reg_offset;
|
||||
brcmusb_writel(brcmusb_readl(reg) | mask, reg);
|
||||
brcm_usb_ctrl_set(params->ctrl_regs + reg_offset, mask);
|
||||
};
|
||||
|
||||
static inline void usb_ctrl_set(void __iomem *reg, u32 field)
|
||||
{
|
||||
u32 value;
|
||||
|
||||
value = brcmusb_readl(reg);
|
||||
brcmusb_writel(value | field, reg);
|
||||
}
|
||||
|
||||
static inline void usb_ctrl_unset(void __iomem *reg, u32 field)
|
||||
{
|
||||
u32 value;
|
||||
|
||||
value = brcmusb_readl(reg);
|
||||
brcmusb_writel(value & ~field, reg);
|
||||
}
|
||||
|
||||
static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode)
|
||||
{
|
||||
u32 data;
|
||||
|
||||
data = (reg << 16) | mode;
|
||||
brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
|
||||
brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
|
||||
data |= (1 << 24);
|
||||
brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
|
||||
brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
|
||||
data &= ~(1 << 24);
|
||||
/* wait for the 60MHz parallel to serial shifter */
|
||||
usleep_range(10, 20);
|
||||
brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
|
||||
brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
|
||||
/* wait for the 60MHz parallel to serial shifter */
|
||||
usleep_range(10, 20);
|
||||
|
||||
return brcmusb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff;
|
||||
return brcm_usb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff;
|
||||
}
|
||||
|
||||
static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg,
|
||||
@ -479,14 +438,14 @@ static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg,
|
||||
u32 data;
|
||||
|
||||
data = (reg << 16) | val | mode;
|
||||
brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
|
||||
brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
|
||||
data |= (1 << 25);
|
||||
brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
|
||||
brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
|
||||
data &= ~(1 << 25);
|
||||
|
||||
/* wait for the 60MHz parallel to serial shifter */
|
||||
usleep_range(10, 20);
|
||||
brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
|
||||
brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
|
||||
/* wait for the 60MHz parallel to serial shifter */
|
||||
usleep_range(10, 20);
|
||||
}
|
||||
@ -713,12 +672,12 @@ static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params)
|
||||
|
||||
if (params->family_id != 0x74371000 || !xhci_ec_base)
|
||||
return;
|
||||
brcmusb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR));
|
||||
val = brcmusb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
|
||||
brcm_usb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR));
|
||||
val = brcm_usb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
|
||||
|
||||
/* set cfg_pick_ss_lock */
|
||||
val |= (1 << 27);
|
||||
brcmusb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
|
||||
brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
|
||||
|
||||
/* Reset USB 3.0 PHY for workaround to take effect */
|
||||
USB_CTRL_UNSET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB);
|
||||
@ -751,7 +710,7 @@ static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params,
|
||||
* - default chip/rev.
|
||||
* NOTE: The minor rev is always ignored.
|
||||
*/
|
||||
static enum brcm_family_type brcmusb_get_family_type(
|
||||
static enum brcm_family_type get_family_type(
|
||||
struct brcm_usb_init_params *params)
|
||||
{
|
||||
int last_type = -1;
|
||||
@ -779,7 +738,7 @@ static enum brcm_family_type brcmusb_get_family_type(
|
||||
return last_type;
|
||||
}
|
||||
|
||||
void brcm_usb_init_ipp(struct brcm_usb_init_params *params)
|
||||
static void usb_init_ipp(struct brcm_usb_init_params *params)
|
||||
{
|
||||
void __iomem *ctrl = params->ctrl_regs;
|
||||
u32 reg;
|
||||
@ -795,7 +754,7 @@ void brcm_usb_init_ipp(struct brcm_usb_init_params *params)
|
||||
USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP);
|
||||
}
|
||||
|
||||
reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
|
||||
reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
|
||||
orig_reg = reg;
|
||||
if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL))
|
||||
/* Never use the strap, it's going away. */
|
||||
@ -803,8 +762,8 @@ void brcm_usb_init_ipp(struct brcm_usb_init_params *params)
|
||||
SETUP,
|
||||
STRAP_CC_DRD_MODE_ENABLE_SEL));
|
||||
if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL))
|
||||
if (params->ipp != 2)
|
||||
/* override ipp strap pin (if it exits) */
|
||||
if (params->ipp != 2)
|
||||
reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP,
|
||||
STRAP_IPP_SEL));
|
||||
|
||||
@ -812,54 +771,26 @@ void brcm_usb_init_ipp(struct brcm_usb_init_params *params)
|
||||
reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC));
|
||||
if (params->ioc)
|
||||
reg |= USB_CTRL_MASK(SETUP, IOC);
|
||||
if (params->ipp == 1 && ((reg & USB_CTRL_MASK(SETUP, IPP)) == 0))
|
||||
if (params->ipp == 1)
|
||||
reg |= USB_CTRL_MASK(SETUP, IPP);
|
||||
brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
|
||||
brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
|
||||
|
||||
/*
|
||||
* If we're changing IPP, make sure power is off long enough
|
||||
* to turn off any connected devices.
|
||||
*/
|
||||
if (reg != orig_reg)
|
||||
if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP))
|
||||
msleep(50);
|
||||
}
|
||||
|
||||
int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params)
|
||||
{
|
||||
void __iomem *ctrl = params->ctrl_regs;
|
||||
u32 reg = 0;
|
||||
|
||||
if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
|
||||
reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
|
||||
reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
|
||||
PORT_MODE);
|
||||
}
|
||||
return reg;
|
||||
}
|
||||
|
||||
void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params,
|
||||
int mode)
|
||||
{
|
||||
void __iomem *ctrl = params->ctrl_regs;
|
||||
u32 reg;
|
||||
|
||||
if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
|
||||
reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
|
||||
reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
|
||||
PORT_MODE);
|
||||
reg |= mode;
|
||||
brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
|
||||
}
|
||||
}
|
||||
|
||||
void brcm_usb_init_common(struct brcm_usb_init_params *params)
|
||||
static void usb_init_common(struct brcm_usb_init_params *params)
|
||||
{
|
||||
u32 reg;
|
||||
void __iomem *ctrl = params->ctrl_regs;
|
||||
|
||||
/* Clear any pending wake conditions */
|
||||
reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS));
|
||||
brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS));
|
||||
reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS));
|
||||
brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS));
|
||||
|
||||
/* Take USB out of power down */
|
||||
if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) {
|
||||
@ -885,7 +816,7 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params)
|
||||
/* Block auto PLL suspend by USB2 PHY (Sasi) */
|
||||
USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN);
|
||||
|
||||
reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
|
||||
reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
|
||||
if (params->selected_family == BRCM_FAMILY_7364A0)
|
||||
/* Suppress overcurrent indication from USB30 ports for A0 */
|
||||
reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE);
|
||||
@ -901,16 +832,16 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params)
|
||||
reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN);
|
||||
if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN))
|
||||
reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN);
|
||||
brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
|
||||
brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
|
||||
|
||||
brcmusb_memc_fix(params);
|
||||
|
||||
if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
|
||||
reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
|
||||
reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
|
||||
reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
|
||||
PORT_MODE);
|
||||
reg |= params->mode;
|
||||
brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
|
||||
brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
|
||||
}
|
||||
if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) {
|
||||
switch (params->mode) {
|
||||
@ -932,7 +863,7 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params)
|
||||
}
|
||||
}
|
||||
|
||||
void brcm_usb_init_eohci(struct brcm_usb_init_params *params)
|
||||
static void usb_init_eohci(struct brcm_usb_init_params *params)
|
||||
{
|
||||
u32 reg;
|
||||
void __iomem *ctrl = params->ctrl_regs;
|
||||
@ -948,10 +879,10 @@ void brcm_usb_init_eohci(struct brcm_usb_init_params *params)
|
||||
USB_CTRL_SET(ctrl, EBRIDGE, ESTOP_SCB_REQ);
|
||||
|
||||
/* Setup the endian bits */
|
||||
reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
|
||||
reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
|
||||
reg &= ~USB_CTRL_SETUP_ENDIAN_BITS;
|
||||
reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN);
|
||||
brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
|
||||
brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
|
||||
|
||||
if (params->selected_family == BRCM_FAMILY_7271A0)
|
||||
/* Enable LS keep alive fix for certain keyboards */
|
||||
@ -962,14 +893,14 @@ void brcm_usb_init_eohci(struct brcm_usb_init_params *params)
|
||||
* Make the burst size 512 bytes to fix a hardware bug
|
||||
* on the 7255a0. See HW7255-24.
|
||||
*/
|
||||
reg = brcmusb_readl(USB_CTRL_REG(ctrl, EBRIDGE));
|
||||
reg = brcm_usb_readl(USB_CTRL_REG(ctrl, EBRIDGE));
|
||||
reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE);
|
||||
reg |= 0x800;
|
||||
brcmusb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE));
|
||||
brcm_usb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE));
|
||||
}
|
||||
}
|
||||
|
||||
void brcm_usb_init_xhci(struct brcm_usb_init_params *params)
|
||||
static void usb_init_xhci(struct brcm_usb_init_params *params)
|
||||
{
|
||||
void __iomem *ctrl = params->ctrl_regs;
|
||||
|
||||
@ -997,7 +928,7 @@ void brcm_usb_init_xhci(struct brcm_usb_init_params *params)
|
||||
brcmusb_usb3_otp_fix(params);
|
||||
}
|
||||
|
||||
void brcm_usb_uninit_common(struct brcm_usb_init_params *params)
|
||||
static void usb_uninit_common(struct brcm_usb_init_params *params)
|
||||
{
|
||||
if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN))
|
||||
USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN);
|
||||
@ -1006,17 +937,47 @@ void brcm_usb_uninit_common(struct brcm_usb_init_params *params)
|
||||
USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN);
|
||||
}
|
||||
|
||||
void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params)
|
||||
static void usb_uninit_eohci(struct brcm_usb_init_params *params)
|
||||
{
|
||||
}
|
||||
|
||||
void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params)
|
||||
static void usb_uninit_xhci(struct brcm_usb_init_params *params)
|
||||
{
|
||||
brcmusb_xhci_soft_reset(params, 1);
|
||||
USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE);
|
||||
}
|
||||
|
||||
void brcm_usb_wake_enable(struct brcm_usb_init_params *params,
|
||||
static int usb_get_dual_select(struct brcm_usb_init_params *params)
|
||||
{
|
||||
void __iomem *ctrl = params->ctrl_regs;
|
||||
u32 reg = 0;
|
||||
|
||||
pr_debug("%s\n", __func__);
|
||||
if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
|
||||
reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
|
||||
reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
|
||||
PORT_MODE);
|
||||
}
|
||||
return reg;
|
||||
}
|
||||
|
||||
static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
|
||||
{
|
||||
void __iomem *ctrl = params->ctrl_regs;
|
||||
u32 reg;
|
||||
|
||||
pr_debug("%s\n", __func__);
|
||||
|
||||
if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
|
||||
reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
|
||||
reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
|
||||
PORT_MODE);
|
||||
reg |= mode;
|
||||
brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
|
||||
}
|
||||
}
|
||||
|
||||
static void usb_wake_enable(struct brcm_usb_init_params *params,
|
||||
int enable)
|
||||
{
|
||||
void __iomem *ctrl = params->ctrl_regs;
|
||||
@ -1027,13 +988,29 @@ void brcm_usb_wake_enable(struct brcm_usb_init_params *params,
|
||||
USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN);
|
||||
}
|
||||
|
||||
void brcm_usb_set_family_map(struct brcm_usb_init_params *params)
|
||||
static const struct brcm_usb_init_ops bcm7445_ops = {
|
||||
.init_ipp = usb_init_ipp,
|
||||
.init_common = usb_init_common,
|
||||
.init_eohci = usb_init_eohci,
|
||||
.init_xhci = usb_init_xhci,
|
||||
.uninit_common = usb_uninit_common,
|
||||
.uninit_eohci = usb_uninit_eohci,
|
||||
.uninit_xhci = usb_uninit_xhci,
|
||||
.get_dual_select = usb_get_dual_select,
|
||||
.set_dual_select = usb_set_dual_select,
|
||||
.wake_enable = usb_wake_enable,
|
||||
};
|
||||
|
||||
void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params)
|
||||
{
|
||||
int fam;
|
||||
|
||||
fam = brcmusb_get_family_type(params);
|
||||
pr_debug("%s\n", __func__);
|
||||
|
||||
fam = get_family_type(params);
|
||||
params->selected_family = fam;
|
||||
params->usb_reg_bits_map =
|
||||
&usb_reg_bits_map_table[fam][0];
|
||||
params->family_name = family_names[fam];
|
||||
params->ops = &bcm7445_ops;
|
||||
}
|
||||
|
||||
@ -13,6 +13,33 @@
|
||||
|
||||
struct brcm_usb_init_params;
|
||||
|
||||
#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg)
|
||||
#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg)
|
||||
#define USB_CTRL_MASK(reg, field) \
|
||||
USB_CTRL_##reg##_##field##_MASK
|
||||
#define USB_CTRL_SET(base, reg, field) \
|
||||
brcm_usb_ctrl_set(USB_CTRL_REG(base, reg), \
|
||||
USB_CTRL_##reg##_##field##_MASK)
|
||||
#define USB_CTRL_UNSET(base, reg, field) \
|
||||
brcm_usb_ctrl_unset(USB_CTRL_REG(base, reg), \
|
||||
USB_CTRL_##reg##_##field##_MASK)
|
||||
|
||||
struct brcm_usb_init_params;
|
||||
|
||||
struct brcm_usb_init_ops {
|
||||
void (*init_ipp)(struct brcm_usb_init_params *params);
|
||||
void (*init_common)(struct brcm_usb_init_params *params);
|
||||
void (*init_eohci)(struct brcm_usb_init_params *params);
|
||||
void (*init_xhci)(struct brcm_usb_init_params *params);
|
||||
void (*uninit_common)(struct brcm_usb_init_params *params);
|
||||
void (*uninit_eohci)(struct brcm_usb_init_params *params);
|
||||
void (*uninit_xhci)(struct brcm_usb_init_params *params);
|
||||
int (*get_dual_select)(struct brcm_usb_init_params *params);
|
||||
void (*set_dual_select)(struct brcm_usb_init_params *params, int mode);
|
||||
void (*wake_enable)(struct brcm_usb_init_params *params,
|
||||
int enable);
|
||||
};
|
||||
|
||||
struct brcm_usb_init_params {
|
||||
void __iomem *ctrl_regs;
|
||||
void __iomem *xhci_ec_regs;
|
||||
@ -24,20 +51,107 @@ struct brcm_usb_init_params {
|
||||
int selected_family;
|
||||
const char *family_name;
|
||||
const u32 *usb_reg_bits_map;
|
||||
const struct brcm_usb_init_ops *ops;
|
||||
};
|
||||
|
||||
void brcm_usb_set_family_map(struct brcm_usb_init_params *params);
|
||||
int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params);
|
||||
void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params,
|
||||
int mode);
|
||||
void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params);
|
||||
|
||||
void brcm_usb_init_ipp(struct brcm_usb_init_params *ini);
|
||||
void brcm_usb_init_common(struct brcm_usb_init_params *ini);
|
||||
void brcm_usb_init_eohci(struct brcm_usb_init_params *ini);
|
||||
void brcm_usb_init_xhci(struct brcm_usb_init_params *ini);
|
||||
void brcm_usb_uninit_common(struct brcm_usb_init_params *ini);
|
||||
void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini);
|
||||
void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini);
|
||||
void brcm_usb_wake_enable(struct brcm_usb_init_params *params, int enable);
|
||||
static inline u32 brcm_usb_readl(void __iomem *addr)
|
||||
{
|
||||
/*
|
||||
* MIPS endianness is configured by boot strap, which also reverses all
|
||||
* bus endianness (i.e., big-endian CPU + big endian bus ==> native
|
||||
* endian I/O).
|
||||
*
|
||||
* Other architectures (e.g., ARM) either do not support big endian, or
|
||||
* else leave I/O in little endian mode.
|
||||
*/
|
||||
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
|
||||
return __raw_readl(addr);
|
||||
else
|
||||
return readl_relaxed(addr);
|
||||
}
|
||||
|
||||
static inline void brcm_usb_writel(u32 val, void __iomem *addr)
|
||||
{
|
||||
/* See brcmnand_readl() comments */
|
||||
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
|
||||
__raw_writel(val, addr);
|
||||
else
|
||||
writel_relaxed(val, addr);
|
||||
}
|
||||
|
||||
static inline void brcm_usb_ctrl_unset(void __iomem *reg, u32 mask)
|
||||
{
|
||||
brcm_usb_writel(brcm_usb_readl(reg) & ~(mask), reg);
|
||||
};
|
||||
|
||||
static inline void brcm_usb_ctrl_set(void __iomem *reg, u32 mask)
|
||||
{
|
||||
brcm_usb_writel(brcm_usb_readl(reg) | (mask), reg);
|
||||
};
|
||||
|
||||
static inline void brcm_usb_init_ipp(struct brcm_usb_init_params *ini)
|
||||
{
|
||||
if (ini->ops->init_ipp)
|
||||
ini->ops->init_ipp(ini);
|
||||
}
|
||||
|
||||
static inline void brcm_usb_init_common(struct brcm_usb_init_params *ini)
|
||||
{
|
||||
if (ini->ops->init_common)
|
||||
ini->ops->init_common(ini);
|
||||
}
|
||||
|
||||
static inline void brcm_usb_init_eohci(struct brcm_usb_init_params *ini)
|
||||
{
|
||||
if (ini->ops->init_eohci)
|
||||
ini->ops->init_eohci(ini);
|
||||
}
|
||||
|
||||
static inline void brcm_usb_init_xhci(struct brcm_usb_init_params *ini)
|
||||
{
|
||||
if (ini->ops->init_xhci)
|
||||
ini->ops->init_xhci(ini);
|
||||
}
|
||||
|
||||
static inline void brcm_usb_uninit_common(struct brcm_usb_init_params *ini)
|
||||
{
|
||||
if (ini->ops->uninit_common)
|
||||
ini->ops->uninit_common(ini);
|
||||
}
|
||||
|
||||
static inline void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini)
|
||||
{
|
||||
if (ini->ops->uninit_eohci)
|
||||
ini->ops->uninit_eohci(ini);
|
||||
}
|
||||
|
||||
static inline void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini)
|
||||
{
|
||||
if (ini->ops->uninit_xhci)
|
||||
ini->ops->uninit_xhci(ini);
|
||||
}
|
||||
|
||||
static inline void brcm_usb_wake_enable(struct brcm_usb_init_params *ini,
|
||||
int enable)
|
||||
{
|
||||
if (ini->ops->wake_enable)
|
||||
ini->ops->wake_enable(ini, enable);
|
||||
}
|
||||
|
||||
static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini)
|
||||
{
|
||||
if (ini->ops->get_dual_select)
|
||||
return ini->ops->get_dual_select(ini);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline void brcm_usb_set_dual_select(struct brcm_usb_init_params *ini,
|
||||
int mode)
|
||||
{
|
||||
if (ini->ops->set_dual_select)
|
||||
ini->ops->set_dual_select(ini, mode);
|
||||
}
|
||||
|
||||
#endif /* _USB_BRCM_COMMON_INIT_H */
|
||||
|
||||
@ -207,7 +207,7 @@ static ssize_t dual_select_store(struct device *dev,
|
||||
res = name_to_value(&brcm_dual_mode_to_name[0],
|
||||
ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value);
|
||||
if (!res) {
|
||||
brcm_usb_init_set_dual_select(&priv->ini, value);
|
||||
brcm_usb_set_dual_select(&priv->ini, value);
|
||||
res = len;
|
||||
}
|
||||
mutex_unlock(&sysfs_lock);
|
||||
@ -222,7 +222,7 @@ static ssize_t dual_select_show(struct device *dev,
|
||||
int value;
|
||||
|
||||
mutex_lock(&sysfs_lock);
|
||||
value = brcm_usb_init_get_dual_select(&priv->ini);
|
||||
value = brcm_usb_get_dual_select(&priv->ini);
|
||||
mutex_unlock(&sysfs_lock);
|
||||
return sprintf(buf, "%s\n",
|
||||
value_to_name(&brcm_dual_mode_to_name[0],
|
||||
@ -331,7 +331,7 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
|
||||
|
||||
priv->ini.family_id = brcmstb_get_family_id();
|
||||
priv->ini.product_id = brcmstb_get_product_id();
|
||||
brcm_usb_set_family_map(&priv->ini);
|
||||
brcm_usb_dvr_init_7445(&priv->ini);
|
||||
dev_dbg(dev, "Best mapping table is for %s\n",
|
||||
priv->ini.family_name);
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user